Bank accounts is not available. connection icons does not
Bank accounts is not available. connection icons does not
Hello
Thanks for the above information.
1 have you tried the methods mentioned in the post above?
I suggest you try the steps from the link below.
You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444
Registry warning
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/322756/ )
If the problem persists then I suggest you contact with the support of Barclaycard from the link below.
http://www.Barclaycard.co.UK/personal/contact-us
Hope this information is useful.
Tags: Windows
Similar Questions
-
Torch 9800, network provider, O2 UK.
Even if my BlackBerry with O2 service is connected and works as usual, I'm totally without enamel on my Torch 9800. I've owned the Torch 9800 since March. Everything has been fine until last week when I changed the password on one of the 3 email accounts I had set up on my device. This change of password remains one of the accounts cannot send or receive mail and is also brings me to discover I couldn't enter e-mail address set up on my device or via my site of network providers ( www.o2email.co.uk ).
I spent hours on the phone with O2 debate this issue. The usual controls and procedures have been carried out, battery pulls, checking settings, etc. and service books were removed and returned several times. These actions have not solved the problem but rather leads to the loss of my other accounts Unit 2 e-mail which work properly but have now disappeared in the air. After trying all possible solutions with O2 I come here looking for an answer.
When I visit my mail service BlackBerry network providers trying to create an account using my PIN etc, I absolutely do a pop up box with the message error "your account is not accessed through an HTML browser. Please use your devive to access BlackBerry Internet Service "! The result is the same, that I connect from my camera on 3 G or wireless, or from a PC (tried several browsers).
On my camera, when I click the icon email accounts in the menu setup that nothing happens, no answer at all. I tried several times and there is no way to configure or change e-mail accounts. I am without mail on my device and growing more and more short of patience.
Now, I'm hoping someone here can give me some advice on how to solve this problem. What is a BlackBerry without e-mail capabilities? I see electronic research set up on the Torch 9800 that I'm not alone here so if someone to BlackBerry is to listen to the problems? If it's a matter of Torch 9800 so I am sure that you will do everything you can to solve this problem, but waiting to help by offering a solution to the problems mentioned.
Thank you
Welcome to the forums, bs342!
Well, since you have searched the forums, you're probably aware that the problem you are reporting is unfortunately a common these days. The good news is that RIM is certainly aware and are working on the problem.
First of all, we will try something on your computer. What browser do you use? Your problem, it could well be as simple as to clear the cache of your browser, then closing and reopening the browser for the website to try again.
If this does not work, try this:
In the browser of your device, select mobile.blackberry.com. Select the country of your choice, then click Communicate > Email. Scroll to other personal e-mails and click on join now, then start the configuration of e-mail. You should be able to integrate your e-mail accounts in this way until RIM has solved this problem.
Please let us know how it goes!
-
my desktop icons does not connect to internet
my desktop icons does not connect to the internet... the fact, but they do not now
Hello
1. the icons on the desktop are you referring?
2. to which programs are associated with these icons?
3. you receive an error message?
4. don't you make changes on the computer before this problem?Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
How to ask a question
http://support.Microsoft.com/kb/555375 -
Original title: Updatususer
I was checking the parental control to see what children are in and I found this new user in there. The user does not appear in the user accounts. Updatususer, is the name.
I tried to access any information in the file, but I see no file... even if it is said that the account was 9 hrs + connected. Is this a virus or some backdoor account made kids?
Thank you
It seems to be used by a program to update NVIDIA.
-
Cannot connect to my bank accounts using firefox
Since last week, I am not able to connect to my accounts at Bank of America and T Rowe Price using Firefox. Both show the same problem: I get my ID, he asks me my password, I get my password and it goes back to the first screen and ask my login again id. It does not error report. He continues to go into this loop.
I have no problem if I use IE or Chrome. I use Windows Vista.
I deleted all cookies, and that did not solve the problem. After that, I uninstalled firefox from my computer and downloaded the latest version and installed again. Yet, I can not connect to my bank accounts. I don't have a problem connecting to other rear accounts; just those two. A week earlier, I have no problem with Firefox. What can be the problem and how to fix it?
Hi mkapoor, the main change in Mode safe which seems relevant would disable ALL your extensions. Given that extensions can be updated in the background, it could be that one of them had a minor change of the feature, or perhaps you have installed a new.
Could you try disabling your essential or unrecognized extensions on the addons page? I hope that the problem is one of those and not something very useful for you. Either:
- CTRL + SHIFT + a
- Firefox orange (or the Tools menu) button > Add ons
In the left column, click Extensions.
Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.
Who help me?
-
Network accounts are not available
Hello
I work in a corporate environment that is mainly based on Windows, but also have a handful of Macs and a Mac server. The question I have is that the MacBook display the prompt "network accounts are not available" when connecting. This message disappears when the VLAN from requiring authentication on our firewall device, MACs are to be excluded.
I thought my our support company firewall that Macs are a kind of test at startup. If they do not have full access to internet NETWORK card wireless goes into a State of semi functioning. It is only when they have access to the internet it goes into a fully operational.
It makes sense when the "network accounts are unavailable" message, I can't SSH in the Mac, but can't ping the IP addresses of our DC, ping any name FULL domain or ping any device outside the VIRTUAL LAN. Does exactly the same as this -after-reboot-no-route-to-host http://apple.stackexchange.com/questions/231290/mac-unable-to-login-network-user
Our company firewall just remember exactly what service performs this function on the Mac. Anyone know what it's called?
Kind regards
Peter
Any help here...
http://osxdaily.com/2007/01/22/what-happens-in-the-Mac-OS-x-boot-process/
During his execution,
rc.boot
and the otherrc
source of scripts/etc/rc.common
, a shellscript that contains utility functions, such asCheckForNetwork()
(check if the network is in place),GetPID()
,purgedir()
(Directory deletes the content only, not the structure), etc.rc.boot
figures on the startup type (Multi-User, Safe, CD-ROM, network etc.). In the case of a network boot (thesysctl
variablekern.netboot
has the value1
in this case), it works/etc/rc.netboot
with astart
argument.
/etc/rc.netboot
manages all aspects of the network boot. For example, it runs the network and (as applicable) supports the. It also calls/usr/bin/nbst
to associate a file of the shadow in the image of disk used as a root device. The idea is to redirect the entries in the file of the shadow, which hopefully is local storage.rc.boot
numbers if a file system consistency check is necessary. Boots single user and CD-ROM does not run fsck. SafeBoot is still running fsck.rc.boot
manages fsck and return status.- If
rc.boot
has finished successfully./etc/rc
-
The apple tv icon does not appear in the menu bar
The apple tv icon does not appear in the menu bar. I can't put my screen on my TV mirror.
Required to use AirPlay
If you go to the Apple menu > System Preferences, click on monitors and do not see the option to "See the mirroring of the options in the menu bar when it is available," your Mac does not meet these requirements.
Minimum requirements if your Mac and Apple TV are on the same network:
- Apple TV (2nd generation or later) with the latest version of the Apple TV software
- For mirroring of your screen to display your desktop, one of the following computers Mac with OS X Lion mountains v10.8 or later version:
Minimum requirements for peer-to-peer AirPlay, which allows visitors to quickly and easily connect their Mac or an iOS device to your Apple TV without getting the passwords and connection to the network Wi - Fi:
- Apple TV (3rd generation Rev A, model A1469 or later version) with the latest version of the Apple TV software
- Mac with OS X Yosemite v10.10 or later version (2012 or later)
-
What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?
Hello 2sealadies!
Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:
If you are using a Windows PC
- Open Device Manager by following the steps for the version of Windows that you have:
- Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
- Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
- Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
- Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.
Exclamation or
question mark by
the pilotNo Apple Mobile
USB device driverYou don't see symbols next to the Apple Mobile Device USB Driver
If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.
You see an arrow down
If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.
You see an exclamation point or question mark
If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.
You do not see the Apple Mobile Device USB Driver
- Disconnect your device from your computer.
- Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
- Reconnect your device to your computer.
- If you see one of these sections in the Device Manager, expand them:
- Imaging devices
- Other devices
- Portable devices
- USB Bus controllers
Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.
If a single unknown device appears, follow these steps:
- Right click on the unknown device entry.
- Choose Properties from the context menu, and then click the Details tab.
- In the drop-down menu, select hardware IDS.
- If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
- If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
- Unplug the unit and remove all the USB devices on the computer.
- Shut down the computer, and then turn it back on.
- Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
- Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.
If you still need help, contact Apple technical support.
Manually update the Apple Mobile Device USB driver
If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:
- Choose update driver software.
- Choose "Browse my computer for driver software."
- Choose "Let Me pick from a list of drivers for devices on my computer.
- Open Device Manager by following the steps for the version of Windows that you have:
- Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
- Click Next. You should see the disk button.
- Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
- Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
- In the disc window, click Open, and then click Next and then click Finish.
- Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
- Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.
-
Why a lock for secure Web sites icon does not appear?
If I use internet exporer as my browser and I connect to an https site a padlock icon is displayed to indicate that it is a secure website. If I use firefox as my browser that doesn't not display the padlock icon
Sorry, I don't think that this problem is related to FavoritesTherefore, the lock is more part of Firefox; It has been removed from Firefox 4. The padlock shows that there is a secure connection, but does not provide any additional information. You could make a typographical error, and have always been connected to a secure connection. The lock was replaced in Firefox 3 with the Site identity button. Familiarize yourself with the Site identity button at the left end of the address bar:
- https://www.Mozilla.com/en-us/Firefox/security/identity/
- https://support.Mozilla.com/en-us/KB/site+identity+button
- http://www.dria.org/WordPress/archives/2008/05/06/635/
You can install this module if you want:
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
My image that icon does not appear in the e-mail
My image that icon does not appear in the messaging section. When I click on the place where the photo should be, it is said: the contact does not exist. I use a Moto X 2nd Gen on Republic cordless phone.
You have a contact for yourself - probably mapped to your connection to google?
-
Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have visited
logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Volume icon does not appear in the notification area
Miss me my "volume icon" in the tool bar?
Hi all
don't know what happened, I did NOT remove myself. All I know is that I add a new update for Java and now I noticed that my volume icon does not appear in the lower right corner where it has always been. Y at - it a fix for this please?
I have no restore point (although Im positive I did awhile back)
I can't find the "System 32" which is supposed to be in the 'control panel'. IM exhausted and at the end of my resources.
Thank you
Daniela
I just to have exactly the same problem as Tecian. Here's what I did to fix the problem.
Open up (Ctrl + Shift + Esc) Task Manager, go to the "Processes" tab, select "explorer.exe" and click on "end process."
Select the users tab in the youself select Task Manager, and then click the log at the bottom. Connection again and everything should be back.
Please post if this worked so he could help others.YTS.
-
When connect my external hard drive and opening not wanting my my files, I get this message "shortened lcwipx.exe you make reference to is not available"and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?
Hi Pascal,.
I see that you get an error trying to access files on an external drive. I'll help you with this problem.
1. What is the brand and model of the computer?
2. What is the brand and model of the external drive?
3. what security software is installed on the computer?
4. have you made changes on the computer recently?
5A external drive earlier good work?
6. have you updated to Service Pack 2 installed?
Method 1.
Connect a different drive to the computer and check.
Method 2.
Plug this external drive on another computer and check the status.
Method 3.
Start the computer in safe mode and check.
Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode
Method 4.
Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
The text on the Windows Paint program icon does not work
I use Vista and do not know if this is the reason why the text icon does not work. All other icons work. Any ideas on how to solve this problem?
Hi bipsvic,
Since when are you facing this problem?
If it works well before?I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.To run the System File Checker tool, follow these steps:
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, the following line, and then press ENTER:
sfc/scannowWhen the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.
Follow the instructions in the link below for more information on scan SFC.
http://support.Microsoft.com/kb/936212/Check whether the problem is resolved.
If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profilePlease post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows. Help
Hello
Try to uninstall and reinstall the network adapter drivers.
Download the latest drivers from the card manufacturer support page.
Download the drivers and extract them to a folder of your choice.
In Device Manager, right-click on the adapter.
Click Update drivers and choose her browse my computer for drivers.
Choose let me a list of choices, click on disk and point to the folder with the drivers.
---------------------------Computer network health.
Check the Device Manager for the entry of valid card of the wire.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).
Turn off the computer and the router, reset the router and the computer.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
On the State of intellectual property.
TCP/IP and its variables usually look like this.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
Typical TCP/IP status looks like this.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
Physical address is the MAC of the card number.The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.* Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
------------------------
Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Jack-MVP Windows Networking. WWW.EZLAN.NET
See you soon!
Maybe you are looking for
-
Re: HP Split x 2 keyboard problem
Hello! I'm having the same problem. I hope you can help me. Thank you!
-
HP Deskjet 1515: HP Deskjet 1515 Scanner issues
Hello, I have a problem with the scanner. Even if I scan a small picture (see picture below), the lines are constantly appearing. I did HP print and Scan Doctor so many times already, but it is still not solve. Any help or info would be appreciate
-
It is a slim form
-
A new version of windows is already installed... where is it?
I'm trying another thread for help, hoping someone can solve this mystery. I tried 10 (hated) windows and am back on windows 7 but have 'lost' windows mail along the way and can't get it back. My programs & features show that I uninstalled but I can'
-
Code Signing - development vs. Production
From embedded development of MFD, so this may be a matter of redunant. I'm used to code signing being differentiated between development and production of keys, with the latter being an expensive, difficult process. For our commercial blackberry appl