can I switch from a graphics card on my gateway sx2803-ub20p. I hope you can help thank you!

Similar Questions

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• Windows Vista will be preform no updates anyone can help, thank you

  Windows Vista will be preform no updates anyone can help, thank you

  Hello

  1. what happens when you try to run Windows Update? You get an error message? If Yes, what is the exact full error message?

  2. you have made no changes to the computer before the broadcast took place?

  3. is the specific question of an update?

  Method 1:

  Run Windows Update Reset (aggressive mode):

  http://support.Microsoft.com/kb/971058

  Now, restart the computer and check the update.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Download the update system analysis tool version of operating system and control accordingly.

  http://support.Microsoft.com/kb/947821

  How to check the updates failed:

  If you access windows update by clicking the Start button to in address bar type windows update and click on enter, click on updates of the review, and it will show you what that is either installed or not updated.

  If the problem remains even in collect and send the Windows Update log.

   

  Follow the below article to collect the log file:

   

  http://support.Microsoft.com/kb/902093

  Use SkyDrive download collected files and post screen/image capture

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

  Hope the above information is helpful.

• How to manually switch the ATI graphics card?

  My laptop is new Pavilion DV6T Quad edition. I want to switch manually between the graphics card Intel inbuild and ATI graphics card. When I check on the internet I have marine I can do this using the switchable graphics option in catalyst control center. But my catalyst control center has only the ability to assign graphic drivers for the application. Also, I've found I can by tyoing ccc ccc advanced on the start menu. But when I typed ccc in that I don't see Advanced ccc all search results I ccc's search results. Please guide me in manual switching graphics

  Hello, I believe that the answer lies in another thread that they keep as a «sticky' at the top of this section "Display/video"

  so here's the link to that thread, that you shows how to download the right driver BIOS and graphics, then how you set it manually in the BIOS for fixed, if that's what you want.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/official-HP-statement-on-switchable-graphics-and-Open-GL/TD-p/766285

  I hope that I understand your request, please let me know if this helps or not.

  Thank you.

• Disappeared from the graphics card

  Hi, I'm using r4 Alienware M17x with NVIDIA GeForce GTX 675 M. Yesterday I got the blue screen and once the laptop has rebooted the gpu has stopped working. I checked the Device Manager and could not find the driver after showing hidden devices and when I check the details, he said that the card is not connected. I disconnected the graphics card and reconnected and nothing happened. I tried to download the latest version of the driver and he told me that the I do not have the compatible hardware. I checked the BIOS and I found "discreet figure 1: not detected" I have updated the BIOS and OSD driver and tried switching using [fn] + [F7] and still nothing happened. I also checked dxdiag and she did not show the graphics card. can anyone please help me I'm out of ideas!

  After all the troubleshooting steps you have done, we can determine that the video card is damage; are you still under warranty?

• HP Pavilion p6-2143w: motherboard will not switch to the graphics card: Sapphire Nitro R7 370 4 D5

  Plug
  The APU A6 - 365 graphics AMD Radeon HD 2.60 GHz
  8 GB ram corsair
  B800M Max Bron Lepa PSU
  Windows 7 64-bit Ultimate

  My problem is that the jury is not automatically pass to the Sapphire Nitro R7 4 370 D5 card. All I get is a black screen. I tried to disable graph embedded in the Device Manager with no luck.

  I also tried looking for a bios update, but I couldn't find one that was on the hp Web site.

  Please help I don't want to buy a new motherboard and cpu.

  Hello

  Most graphics cards require BIOS version 8 HP.  BIOS version 8 is listed under Windows 8 for your particular model PC.  While the BIOS version 8 will probably support your new graphics card, you might find yourself stuck that Windows 7 will not work using the UEFI. You can install BIOS and then turn on legacy mode and see if the card works. However, if the card is a single card UEFI well then you are in a situation of 'catch' 22 In this case, you would have the BIOS later and W7 should always work in legacy mode.  Even with this BIOS update running in mode inherited that there could be some risk that W7 will not work.  Once you update the BIOS there is no coming back.

  Another thought.

  There are no Windows Ultimate 10 version if upgrading to W10 (free upgrade) would you put on the professional version W10. I do not know if that would suit your needs. However, if you have a place in the upgrade by using the W10 iso DVD or flash drive then you could extract the W10 license key so that your could do a clean install with legacy mode turned off in the BIOS that puts your PC into UEFI mode.

  You have a few risks to consider.  In addition, HP has not posted the W10 for your PC drivers.

  What would I do?  I'd go for it, but then my wallet could be deeper than yours.

• Failure message from the graphics card Dell Inspiron 580 s

  Hello

  A week ago I was on my PC and I get a black screen, saying: my graphics card has failed and needs to restart the PC. So I did and it worked perfectly afterwards, so I don't think anything at the time. Yesterday, I got exactly the same problem occurs, then I ask it to see if I need to replace or not. My graphics is the graphics card Intel (R) Graphics integrated 4000. The PC is 6 years old and has been used a lot, so I think it's towards the end of his life.

  Thank you for what you never answer and if you need more information, just ask.

  OS: Windows 7 Pro

  BattleGaming

  I plan on rebuilding the PC in about a year, but I'm just wanting to make sure that it is not a Fatal problem.

  It is a with a TFX power supply mATX chassis. You should be able to Exchange in a mother mATX 1155 or 1150, at the expensive of invalidating your Windows license.

• Try buying a new graphics card but don't know if it will work. Help

  Hi guys, I'm new here and I have a question.

  I have a computer, HP Envy h8-1414, this is the link that it http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03517389 and I never liked the graphics card. I found a very good graphics card which is perfect for me, but some people told me that my habit of motherboard, run it.  This is the map of graphics http://www.bestbuy.com/site/xfx-radeon-r9-270x-2gb-ddr5-pci-express-3-0-graphics-card/2091002.p?id=1... My friend told my that my computer can only run PCI express 2.0 and I want to run a PCI express 3.0 graphics card. Is this true? Also I have improved my diet of 300 to 600 wats wats so food should not be a problem. Please help me. Thank you

  Your friend won't. 2.1 is not compatible with certain versions but 3.0 is fully backward compatible. It should work correctly.

  You made sure to buy a power supply with two 6 slots for the card?

• (! "I need help!) Graphics card that is right for my needs? (I need help!)

  I am planing to upgrade my graphics card Intel HD 4600 to a good graphics card for Adobe Premiere, Adobe After Effects and some games like GTA V. currently, these PC specifications: Intel Core i7 processor 4790 3.6 GHz, 16 GB of Ram (1600 MHz), 2 x 1 TB WD red HDD (I am planing to get later a 512 GB SSD)

  My needs:

  A good graphics card with which I was able to get a video edithing '4K' Workflow at 60 Hz

  He should ' t cost more than 400 $

  It must be great for Adobe After Effects and Adobe Premiere.

  It must be also very high for some games like GTA V Ultra mid-week.

  Please help me graphics card wich I should get, if you have an idea, that would be great for me, so please help me.

  For 4 k you will need a video card with at least 4 GB of ram.  In your price range, take a look at the video card GTX 770.  It should work as well with your games.

  David

• recently, I ran a program that has messed up my settings for the taskbar! now, any program or folder I use shows a small button mini that you cannot read even if someone can help thanks to

  recently, I ran a program that has messed up my settings for the taskbar! now, any program or folder I use shows a small button bar mini tasks that you do not know still can anyone help thank s that it is just a program minimized, I used to be able to read the content now, it is not big enough for an icon

  Hello

  You can check this link:

  Description of the Option "the of the Group similar taskbar buttons".

  http://support.Microsoft.com/kb/281629

• Can I switch from a graphics without a new power supply on the Pavilion p6120t?

  Have your desktop Pavilion p6120t with power supply 250w... I was wondering if any of "recommended" card graphic 512 MB (GeForce G210, Radeon HD4350 and nVidia GeForce GT 120) would be OK with 250 watts?

  MC, I would be very skeptical about upgrading the video card without upgrading the PSU.  250W POWER simply do not have the power to run a more powerful video card.

• Firefox asks me if I want to save login or password information more. This option is no longer available or I inadvertidly checked a box in preferences by mistake? Hope someone can help, thanks.

  I registered today with the help of firefox and when I logged in I was not asked if I wanted to save my log in details.

  If you are not using Windows instead of tools > Options use:

  • Linux: Edit > Preferences
  • Mac: Firefox > Preferences
  • Windows: Firefox > Options or tools > Options

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.com/kb/private+browsing

  To view the history settings and cookies, choose: Firefox > Preferences > privacy, choose the setting Firefox will: use the custom settings for the story of

  • Uncheck the box: [] "always use the navigation mode private.

• Possibility to update graphics card on the Satellite P100 - 10 p

  Hello

  I bought a laptop from Toshiba Satellite P100 - 10 p which has a Geforce Go 7900GS inside.
  Will be always possible to switch to the graphic card Geforce 8 series (for example Geforce Go 8800 GS)

  Thanks in advance

  Hello

  so many people are asking this, and I love to explain so often. ;)

  No, it s is not possible! You cannot update, since the VGA of the computer is limited to the motherboard, oou if the motherboard has really a port special external pci - e VGA, then everything just because the modular design of the hardware, but not that you can change the VGA card.

  But don t be funereally :), there is a solution.

  There are some manufacturers that are developing a case of external graphics card, where you can put a regular vga (pci-e) card for playing games on a screen.

  Just type in google: slot external vga express

  Good luck

• Replacing a graphics card from NVIDIA GeForce 9800 GT for a HP PAVILION ELITE

  I'm looking for a replacement for a graphics card from NVIDIA GeForce 9800 GT for a HP PAVILION ELITE M9361. UK - A DESKTOP PC (EMEA) which has a number of product KZ758AAR.

  The PC is not used for games, but for the treatment of the graphic image.

  I believe that a

  PNY GTX 550 TI PCIe 2.0 Graphics Card - 1 GB

  can be a suitable replacement.

  Can you please advise.

  Excellent choice. The card fits, and your power supply meets the minimum required.

  Fortunately, the PNY graphics card comes with the power cable PCIE 2 you will need.

• HP Pavilion Slimline s5615uk: upgrade I can add a graphics card to an HP Pavilion Slimline s5615uk-m

  Can I add a graphics card? If Yes, which?

  @DavidMW You are welcome.

  Please do not hessitate to ask questions.  This is the reason why I'm here.

  Most of the games are today video very intensive.  This is why your computer begins to lag when the game gets busy.  A video card would be a good thing, but will be much easier to install more memory.  This is the memory that is recommended by Crucial memory.  The max memory is 4 GB, however.  You would be better served if you decide to upgrade the memory to buy 2 x 2 GB memory new and remove the old.  Another way to increase performance of the system is to add an SSD.  Take a look at the recommended by Crucial SSD.  They make great products for OEM computers.  My HP laptop game boots Omen is less than 7 seconds and increases the speed of loading games with the 256 GB SSD.

  I have to be honest with you.  The Slimline models simply are not meant for the game; even

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.