BASIC data recovery, does not

Similar Questions

• VMWare Data Recovery does not properly

  Hello

  I use VMWare (VDR 2.0 - with Vsphere 5) data recovery tool. I'm tempted to save a virtual machine and the VDR said the backup was successful. But I can't restore the virtual computer. When I checked the log, I found that the vmdk is not saved.

  26/07/2012 10:22:31: normal backup using Backup1
  26/07/2012 10:23:18: created snapshot '_datarecovery_ '.
  26/07/2012 10:23:19: copy "vm1' destined ' / MNT /.
  26/07/2012 10:23:19: independent labels 'vm-153. "[datastore1] vm1/vm1.vmdk ' is not saved
  26/07/2012 10:24:13: deleted snapshot '_datarecovery_ '.
  26/07/2012 10:24:14: task completed successfully
  26/07/2012 10:24:14: finished: 3 files, 26KO
  26/07/2012 10:24:14: performance: 0.1 MB/minute
  26/07/2012 10:24:14: duration: 00:01:43 (00:00:48 idle/load/preparation)

  I use the default backup device provided with the VDR. (Cent OS 5.5). I backup virtual machines on a NFS mounted in this machine (VDR) centos.

  Can someone help me understand the problem? any help would be appreciated.

  Newspapers say it all: "26/07/2012 10:23:19: independent labels 'vm-153." "" [datastore1] vm1/vm1.vmdk "unsaved."

  This VMDK is configured as independent VMDK, independently discs are "made not snapshot ' type of drives and because of this VDR will not back up these disks.

  First of all you need to know why this drive is configured as apolitical, apolitical fashion isn't really necessary then stop VM and remove "Apolitical" mode option of this hard drive in the hardware configuration of the VM.

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• partitioned and converted to dynamic, recovery does not load

  HY!

  I wanted to create a new partition on my laptop (g62-a20eh xc211ea), but for this I had to convert my hard drive in Dynamics. And now the recovery does not work, it is not booting and cannot run it even of the operating system. Is it possible to convert it back to basic? If so, then it will work recovery? If not, where can I order the recovery DVDs? Or is there another solution? (I'm from Hungary and I'm sorry about my English skills )

  Thank you

  You can try EASEUS partition master home edition... It's free and

  its work for me!

• Satellite L670 - the system HARD drive recovery does not start

  Hello together,

  I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

  When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

  Can you help fix the problem.

  Thank you and best regards,
  Dinder

  Hello

  This does not work because you have installed Win 7 64 bit as you said here:
  > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
  Try this

  Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
  That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

  What to tell buddy you need recovery disks. I guess that you have a European model for laptop

  You can order the recovery discs here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Recovery does not start on Satellite P200D

  I have a satellite P200D and I need him back due to a virus.

  Now, I ordered the recovery media kit and when I want to start it it does not start. The manual said, put the DVD, restart the computer and press F12 when the massage "In Touch With tomorrow TOSHIBA" poster.

  The message is not shown in the configuration and the recovery does not start.
  When I press F12 at startup is also the recovery does'nt start.

  What I am doing wrong?

  How can I get my laptop back?
  Any ideas?

  Hello

  You must boot from the disc.
  This means that you will need to insert the disc, have to turn on the device, choose ODD as boot device and this will start the recovery process.

  Try this!

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• A key recovery does not!

  Hi all, as indicated on the title, my one key recovery does not work.

  Whenever I press the recovery button (the host files charges) and when it finishes, it hangs there.

  The first time I tried this it worked fine.

  The last thing I did was to put some files in my D drive (where all driver files are) and I tried to delete the files, I put and try again, but it did not work.

  Any help guys?

  
  

• Why do write can not be performed because the number of data channels does not match number of channels in the task.

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 8
  Number of data channels: 1

  Lama says:

  The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

  You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

  (If your car does not work, you bring car your wives to the mechanic, right!)

  What is the exact text in the multichannel 'physical channels' when you do the AO control?

  Lama says:

  I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

  All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

  First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

  A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

• System repair & Recovery does not work / Vista Windows Mail won't open attachments sent with PowerPoint Slide Show

  System repair & recovery does not work.  When I use it, it never restarts the computer.  I have left running and went to bed and is still running the next morning.  The SR & R is grayed out and will not open.   When I restart the computer after that it ran all night, a message appears to tell me that I cancelled the operation.  Help!

  I have another problem with Vista Windows Mail; I can't open attachments are sent using Microsoft PowerPoint Slide Show.  The message is: * this file does not have a program associated with it for performing this action.  Create an association in the set Associations Panel.  I don't know anything about computers or the control panel.  How can I fix these problems?  Help!

  Problem with recovery to factory settings or system/process of repair software, contact the manufacturer of your computer.
  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You need PowerPoint or a viewer PowerPoint installed on your computer to read PowerPoint attachments.
  Learn about file Associations in the lower part of this response.

  need .doc or .docx Word or a Word Viewer for playback file extensions, etc, etc.
  .xls Excel need.
  need for .pps PowerPoint

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  And to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• BBM Password recovery does not

  Hello.

  I lost my Z10 due to water damage and got a Samsung s5. Setting up my BBM is a nightmare, as the issue of recovery does not work. I got the answer to the security question in almost every possible way, and yet it keeps saying that the answer is incorrect. I know 100% that the answer is correct. I don't want to lose all my contacts, how to fix this?

  @jpmeek would not change your password without your consent the so the only thing I can think of you may have used a different password, or made a mistake when you initially set up your answer to recover. Unless you can understand the only option is to recreate your BlackBErry ID. For advice on how to do this review please the following KB. Thank you!

  KB35103 - how to reset the BlackBerry ID on BBM for iPhone and Android account, if the password Recov...

  @BBsucks2 if you are using an Android device, please review the KB, I just mentioned to help reset your BlackBErry ID. If you are using a BlackBerry smartphone, please see the following KB instead. Thank you.

  KB26361 - how to change or reset the BlackBerry ID password

• Basic Terminal commands does not

  I'm trying to run the command createmediainstall (https://support.apple.com/en-gb/HT201372) on the terminal in recovery mode to install a copy mounted Yosemite from a USB, it says currently it does not recognize the command I noticed as he does not recognize sudo, basic as the date commands etc seem to work though, no idea why?

  Currently (tent and failing) to run El Capitan 2011 Macbook Pro

  Hello CrookedCartoon,

  Your user account may have a problem with paths or something. Create a new administrator account and it try it. For something like the commands from the Terminal, it is very easy to use copy / paste to post the details here in the forum all exactly what you try and exactly what the result is.

• Equium - dead after hibernation, the system recovery does not work

  Hello
  I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

  She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
  So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
  I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
  I removed the battery and put back in place, without result.
  Connection to an external monitor shows no results.
  When I put the original CD recovery Toshiba, no results.

  So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

  Any help or ideas would be very appreciated! ;)
  Daniel

  Hello

  My laptop could not wake up after hibernation too but I managed to wake up again.
  This;
  Disconnect the power adapter and remove the battery.
  Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

  After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
  This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

• Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

  Hi all

  my situation is like this:

  When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

  My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

  The partition table doesn't have a valid System Partition.

  Repair action: Partition table repair

  Result: Completed successfully. Error code = 0 x 0

  That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

  CMD:

  DiskPart

  list disk

  Select disk 0

  partition from the list

  selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

  created new partitions same dimensions (all the primary dimensions)

  then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

  So after this long description, my question is:

  Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

  P.S. I do not installed Windows 7, I just deleted partition table and created a new.

  Sorry for my English, I'm not a native speaker. Thank you in advance.

  Hi MatBar,

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

  You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

  I hope this helps.

  Thank you.

• 6361 versatile usb data acquisition does not automatically detect the SCXI chassis/accessories

  versatile usb data acquisition 6361 will detect automatically SCXI chassis and accessories?

  Hello kdCMC,

  As far as I know that the SCXI-1600 USB Module is able to auto-detect SCXI Modules.
  This is also mentioned on page 11 and 12 of the following SCXI to start document:
  http://www.NI.com/PDF/manuals/373236m.PDF

  All data (including USB-variants such as the NI USB-6361) have only a 68 pin shielded cable (IO) between the DAQ hardware and the SCXI chassis.
  This cable does not auto-detect opportunities since it basically just "transfers analog and digital signals" between SCXI chassis and DAQ hardware.

  Is there a specific document that created the confusion on this subject?