BAT to CUCM release 4.1 call forward

Similar Questions

• Call Forwarding 9.3.1 ios does not work

  After the update of ios of 9.3 to 9.3.1 WHAT CALL FORWARDING does not work

  Call forwarding is a function of carrier. Contact your operator.

• Recently I have not been able to forward my iPhone 5S for message store.  I've never had this problem before. When I looked to what to do, I realize that The Call Forwarding icon does NOT appear in the status bar when I try to transfer calls.  How c

  Recently I have not been able to forward my iPhone 5S for message store.  I've never had this problem before.

  When I looked to what to do, I realize that The Call Forwarding icon does NOT appear in the status bar when I try to transfer calls. How can I fix this please?

  It does not work using * 21 * + 6 * 41412 * 2 #.

  < personal information under the direction of the host >

  Call forwarding is a function of carrier. Contact your operator.

• Call forwarding for iPhone 5 s using Straight Talk wireless

  I have an iPhone Unlocked factory 5 Straight Talk wireless.  Using the instructions of carriers or the iPhone I can't make it work.  Straight Talk support, of course, sez contact Apple support.  Does anyone have a suggestion?  Thanks in advance

  Call forwarding is strictly a feature of the carrier has therefore nothing to do with Apple.  You must get straight talk to help you sort out why it doesn't work for you on this phone with their service.

• Call forwarding does not work ;-((

  Hello

  I got Skypenumbers from the beginning. But since two months call forwarding no longer works. I renewed my subscription; I have 30 euros on credit account. I even tried a new Skype number to see if the old number could have crashed. But also the new number does not work with call forwarding.

  It's abit frustrating to read Skype/Microsoft does not very serious service.

  This problem will be resolved, or must we begin to use the other services?

  AB

  Dear Elaine,

  I have finanlly managed to get a conversation with the assistance service. It was still not available, but I got lucky.

  And they found the problem; I got in the App on one of my Macs 'private' privacy setting This is why di call forwarding does not work. So I changed it to open and now it works.

  Thanks for your help and advice; I am happy that this solved in the end.

  See you soon

  AB

• If I set up call forwarding on my Skype Premium plan with online number will be I charged or covered?

  Hi it's very confused, I tried to watch several posts on this topic and have not found a clear answer.

  I have a Skype Premium Plan that covers Unlimited United States and Canada and a number of Skype online. Now my question is IF I set up on my cell phone number call forwarding (who is T-mobile, it's my cell phone provider) I pay for minutes with Tmobile and having to pay the cost of returning with Tmobile or will be covered by my Skype subscription call?

  The reason I ask because I want to know covered with 100% certainty whether or not he is, also the same question that I have to if I configure Skype online number if set with a landline call forwarding will be covered or will I have to pay on the landline minutes if it's a no premises. I know on a landline, local calls would be covered, but I'm not local.

  Please help my Confusion,

  Thank you!

  -User of Skype confused

  I contacted Skype a few months there this topic, they said that if you have a subscription if it is covered by your subscription (for example, calls to the US & Canada unlimited) and make a call on Skype, it will be covered.

  I don't have e-mail or lost it somewhere it's months, but basically, that's what he said.

• Call forwarding - Argentina

  Hello. I just bought a Skype (American - U.S.) number and I need to pass it on to my mobile phone in Argentina. The problem is that I get calls on Skype, when I have it running on my computer, and when I'm offline, they just go to your voicemail.

  What should I do to receive them in my celllphone here?

  I have already set up in the section "call forwarding".

  Thank you in advance.

  Sorry I was not clear enough - I want a screenshot of the settings in the client Skype Call Forwarding Options
  
  What do you observe when someone calls your Skype client using Skype while you're online?
  
  also, you say you have Skype credit - please confirm that you can call your Argentine mobile using SkypeOut number

  Kind regards
  Neil

• Classic BlackBerry how can I create a shortcut to the call forwarding settings?

  I frequently update forwarding calls (all calls) to various destinations and want an easier way (Hotkey?) instead of: open phone app, scroll down from the top to join settings that often requires a few attempts scrolling, tap Settings, click call forwarding.

  It really should be a way to create a 'macro' to all this.

  Thank you!

  Agreed! A keyboard shortcut would be ideal

  I'll be sure to capture your comments and share with our product team for future consideration.

• Activate a call forward with a third party SIP device or an analog device

  Hello

  In a CUCMv9, how do I activate a call forward (all, not busy, no answer...) with third party SIP device or an analog device, connected to a fxs?

  I want to activate call forward like an Alcatel or Aastra PBX with a code.

  For example, I pick up the phone, with the code * 95 followed by the destination number and hang up the phone. And use the #95 to desactivate the call forward.

  Is it possible?

  Thank you.

  No codes for 3rd not part of SIP phones, no way to do it. Or for that matter, not even for Cisco phones, other than the CFA.

  Something other than CFA must be done via CCMadmin or CCMuser to any type of phone.

  For FXS which is not feasible if you run SCCP

  http://www.Cisco.com/en/us/partner/docs/iOS/voice/FXS/configuration/guide/fxssccpsplmft.html

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• Cannot call forward to external numbers

  I put an external number for call forward when a user is away from their desk phone.  Inside extension forward works but when a call comes provenance of the PSTN and hit the line and then is redirected to the outside number fails.  Any ideas of what could be the cause?

  Thanks for all the help.

  > When entering the external call.

  Original part number i = 0 x 2183 appellant, '2566138703'

  Redirected part / first called: 2220

  Incoming dial-peer = 1 & outbound Dial-peer = 2200

  > When the call is redirected to the PSTN.

  Calling party number i = 0 x 2181, '2566138703'

  Plan: ISDN, Type: National

  Called number i = 0 x 80, '2226561'

  Plan: Unknown Type: unknown

  Incoming Dial-peer = 6750 & outgoing Dial-peer = 9

  then the disconneting the redirected call with 80AF entry door

  13:20:27.258 on 23 Jan: ISDN Se0/0/0:23 Q931: TX-> the DISCONNECT pd = callref 8 = 0x1D89

  Because I = 0x80AF - resource unavailable, unspecified

  While Joseph was proposed, please cutting across dial peers for any incompatibility of codec.

  Please note all useful posts

• Z10 blackBerry CALL FORWARDING

  I am happy with the advice given me yesterday that I can't run the blocking of specific numbers on Blackberry Z10, but the second part of my querry that was the call forwarding was unanswered. Please how can I forward all calls on my Z10 to another number? I need benchmarks on what menu to use, and what measures to take to transfer all calls to my Z10 to another number. Thank you. John

  Hello..

  Go to call Logs

  Drag down to settings

  Tap call transfer

  There you can set the number where you want to forward calls.

  Thank you

• Conditional call forwarding and popup screen.

  Hi all

  I push a pop-up screen to cover a call out with my own information. However on my device and several others, a pesky "conditional call forwarding" popup is displayed by the phone which briefly takes precedence over my popup screen. Is this anyway to prevent this.

  I push the screen by using the following code.

  UiApplication.getUiApplication().pushGlobalScreen(activeOutDialScreen, 0,UiEngine.GLOBAL_SHOW_LOWER) ;
  

  I tried setting the summary field on a few different things, but nothing can stop the pop-up conditional reference poster.

  Any help or just confirming, that it is not possible would be greatly appreciated.

  Kind regards

  Alan

  None

• CUCM mcu siptrunk video call bindwith

  Hi team

  I have a question about how can I config the bindwith for the siptrunk?

  I used a tunk sip to leave the cucm forward the video to the mcu conference call (5310), but no matter how I set up the bindwith video of location in cucm profile, call rates transmit only 384 k, but the receive call rate is 4000 k, but the hit rate and resolution are well when the mcu call codec (C60) directly by using H.323.

  I think I missed something in cucm configuration.

  Hi Jason,

  Could you give more information about the configuration of CUCM? How your regions are configured? Do you have the regions applied to SIP Trunk and the phone? The relationship between the regions allow enough bandwidth for the video?

  If I'm not mistaken, the default bandwidth for the video within the region setting is 384 k. Did you change this value to your regions?

  I also suggest to examine the configuration of your location and check if there is any restrictions applied.

  Concerning

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• call forwarding

  Here's the situation:

  I have a HK registered number online

  and I want to ask if it's possible for me to forward calls to this number to my UK mobile number?
  
  how he will be charged if possible?

  jkwai0130 wrote:

  
  

  1. I have a HK registered number online

  and I want to ask if it's possible for me to forward calls to this number to my UK mobile number?
  2. how it takes, if possible?

  Hello
  1. to achieve this goal, you need either a subscription covering calls to cell phones UK or Skype credit.

  2 25.9cents / minute or part thereof, over a connection 7.9 cent charge per call (not per minute). If you are using a subscription there is no connection fee.

  No duplicate post please. Deleted duplicate. Thank you.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• CUCM 8.6 Multipoint calls to endpoints of TP

  Hi all

  We have a series of profile sets and EX90 endpoints that must be configured in Call Manager 8.6. I know that it can be added as a device directly from CUCM 8.6 from. If I do a Multipoint call between by profile65 and EX90, how is that possible?

  We also have a 9971 phones.

  Can I use a microcontroller and use it as HW conference bridge in CUCM? Can someone share a document on it?

  Thank you

  Bobby

  just tested in the laboratory... works correctly with CUCM registered endpoints... I have run tests with the following features

  CUCM 8.6.2

  4501 MCU sw ver 4.2 (2.30)

  IP-phones used 7985, ip communicator, 9971...

  so this should work for 4505 so... attaching some shots of config...

  

  

  Once you are in a conference call THAT CUCM sends the commands API over http to create the ad hoc Conference.

  Thank you

  Alok