Batch 'Place' gets off center after several images

Similar Questions

• Why is code to get the center of the image does not?

  Hey there. I'm trying to set up the center of the imags that load so that I can put them in the center of the stage. I do this each image is a different size.

  Here is the code that I learned to work before, but its doesn't now and I've been searching for what I've done wrong with no luck. : (

  Would watch you over and maybe you'll see what I'm doing wrong?

  public function placePicture(e:Event = null):void {
       rawImage = imageData.image[imgNum].imageURL;
       lastImageIndex = imageData.*.length() - 1;
                      
       imageLoader = new Loader;
       imageHolder = new Sprite;
       imageLoader.load(new URLRequest(rawImage));
                                
       imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
       imageLoader.y -= imageLoader.height/2;
       imageHolder.x = 640; //this is the center of the stage
       imageHolder.y = 100;
       imageHolder.addChild(imageLoader);
       masterHolder.addChild(imageHolder);     
  }
  

  The result when I publish is the image comes on stage, but the upper left corner goes to 640 instead of the center of the image to 640.

  I tried several variations of this all with the same result:

  imageLoader.x = - 1 * imageLoader.width / 2;

  I tried to use setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php

  and I tried to do all this by inserting the charger in a sprite and then in applying the code to the sprite and then adding only another sprite sprite and put to 640 and inserting is not in another sprite and trying to right set up the existing 640 sprite (I hope that all the senses). And I tried to put width/3 and nothing else happens.

  If you have other ideas or you can see what I am doing wrong I would be really gratefull for some tips! : )

  Thanks for any help!

  Oh, and I'm getting no errors on it.

  width and height of the image are not available until the loading is complete.  That is to say, use a Headphone/Earphone full function.

• Caching SSDS on Inspiron One 2330 turn on/off before/after backup Image C:

  My new Inspiron one 2330 works under 64-bit Windows 8 and SSD Caching-as put in place by DELL

  Before I run Acronis True Image 2013 to generate a backup Image of your hard drive, I need to disable the SSD Cache.
  Otherwise the restored Image cannot start successfully - because the content of the HARD drive would be incorrect.
  After the backup is completed and verified, I need to turn on SSD Caching.
  To do this, I want to insert a command-line command before / after the backup operation in the Acronis program options.

  So my Question is actually:
  What command line command (C: /...) can I use to make the switch or disable the Cache of 8 SSD 64-bit WIndows?

  Thank you!

  Hello Reinhard Klein,

  You can follow the steps below in order to dissociate the SSD cache:

  

  

  You can create an image with Acronis and then follow the steps below to reassociate SSD cache:

  

  Note: Dell has not tested or approve the use of Acronis True Image to create a backup of the image.

  I hope this helps.

• recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the proce

  recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the processing of hundreds of images that I usually take on a weekly basis.  I bought a new faster laptop, but when I looked for the cd with the software of series and I couldn't find in the mess of Christmas.  I downloaded a trial version of lightroom and got, it works on my new laptop. Is there a way to access the serial number of my version already installed and insert it in the version of track to make it work for me?

  Myron

  If you take the time to register to your original with Adobe installation (which most people do not), you can log in to your Adobe account and get the serial number. If you use a Windows computer and still have access to the old computer where Lightroom is installed, you can do the following:

  1. in the window folder options, make sure that you are able to see hidden folders.

  2. go to the C:\ProgramData\Adobe\Lightroom folder.

  3. use Notepad to open the file, Lightroom 5.0 Registration.lrreg

  You will be able to retrieve your serial number of this file.

• Place several images at once

  I tried to programmatically import several images in InDesign, but I'm having a small problem. As I understand it, a multiple selection returns an array, but the script is up on top of me. Here's what I have so far:

  var slideshowImages = File.openDialog ("choose the pictures you want included", "files: * .jpg", true);

  If ((slideshowImages! = "") & & (slideshowImages!) (= null)) {}

  var slideshowItems = tabletSlideshow.pages.item (0) .place (slideshowImages);   < = this is where I get the value of «invalid parameter 'Filename' method 'place'...» "error.

  slideshowItems = slideshowItems [0];

  Can I place one, but not multiple. Any ideas?

  The usual way. Use slideshowImages.length to get the number of images; Then, you can loop through all of the images and place each of them:

  for (i=0; i
  -even if you need to think of a way to place each image on a page that is unique, because this loop will stand on top of the other on the first page.
  		   

• After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad: "your iPad could not be activated because the activation server is temporaril."

  After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad:

  "Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support. »

  I am based in Lagos in Nigeria and can't seem to find any Support from Apple for my country on the web. Please urgent help because I can not access my iPad. Thank you.

  How did you get the update? via iTunes or ios

• Toshiba 40L7335D will turn off by itself after several hours of use

  My Toshiba 40L7335D TV periodically turns off by itself!
  Bought a few days, everything else works perfectly during the day, but after several hours of use of the TV is off!

  Is a problem that someone else has or knows?

  Please see the user manual * page 74 *.
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7335-4050-English.PDF

  _Energy saving Settings_
  + The TV automatically turns off (standby) after 4 hours, if you do not use not the TV, either from the remote or the TV Control Panel. +

  and

  _No signal Power Down_
  + TV turns off automatically after 15 minutes when no signal is detected.

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Place several images at the same time, what is possible?

  Hi all, im trying to figure out if something is feasible with photoshop and im strugeling to find the words to ask google so Ive decided to come here and to ask a person, see if you can fatchom what I am trying to ask haha. Heres so my question. I have several images saved characters with different angles. what I want to do is put everything on a single sheet to print. so, for example, ive has obtained as a leprechaun on front left and right view and rear view. I have several characters saved like that. I want to put everything on a single image to print on a sheet of paper. is there a way to select all the images at once. Place them in the scene and then resize everything at once and remove the white background of them suddenly, rather laboriously make them one at a time because its blows my mind right now. (if you were wondering why the hell I am doing this for D & D, they will cut outs, in several positions, with different armor that can be pasted on the body of the main character) anyway, thanks in advance for any help. bad shares with the community when you are finished if anyone wants them for their own games!

  There are scripts that can do this.  Contact sheet II also my Photo Collage Toolkit including PasteImagRoll scripts.

• I get a message after downloading several apps: U44M1l200 there has been an error of installation of this update

  I get a message after downloading several apps: U44M1l200 there has been an error of installation of this update

  Please see this link:

  Error U44M1I210 | Install updates

  Hope this helps you.

  Concerning

  Megha Rawat

• Place several images in a container (was: InDesign)

  Hello

  I'm new to inDesign. Can someone help me place several images in a container like rectangle which I can obtain the coordinates of the different grphics/pictures with respect to the container not document page.

  Thank you and best regards

  SAL

  I´n, not quite sure what you are trying to do but I m afraid it s is not possible in InDesign. Coordinates are always referring to the page, or in fact the origin usually located on the top left corner of the page.

  If you want just a single image for multiple images, you can try to use the dough in the command. Group your images and edit > cut. A blank rectangle, select, and edit > paste inside. Now you have your image within a group setting and they Joanie act as a single image, if for example evolve you your frame...

• SCRIPT TO IMPORT SEVERAL IMAGES PLACES... AND MULTIPLE IMAGES IN SINGLE OUTPUT PDF.

  Anyone got a script to import several images placed in CS4? or is it possible in CS5?

  and we can out of the multiple layers in a single PDF in illustrator?  Or several layers in single format JPEG from illustrator with a single command instead to save individually on each page... would be a huge timesaver for me.

  Currently I pulled out each layer individually filled then right-click on these JPEG output files in the output folder and choose "combine taken supported files in acrobat... "to create a unique acrobat...

  I also that to be able to CTRL click multiple layers and go save as... only these layers be saved on...

  And so add something in the Save to output PDF save the Layers dialog box to multiple pages would be a useful time saver...

  In CS 4 and CS 5, you can drag and drop FRO m the finder or bridge, and I suppose that any other viewer of similar type, multiple number of image files to a document. You can configure the bridge so that you can see the bridge and your document at the same time for this purpose.

  If you drag and drop files are linked, if you drag while holding down the SHIFT key, then the files will be incorporated.

  ID and PS CS 5 have a minijonction who works the way sam but is actually a Panel and will stay at the front.

  

  I have separate images but they import on the other.

• Can't understand why documents print off center

  Problem: When you print a document on legal paper, each page after the first print off center. Specifically, it moves the upper left corner to the middle of the page and prints what it can on the page without narrowing/resizing. This does not happen on the first page (i.e. the first side of the first physical piece of paper if printed one - or two-sided), but it happens on every page after that.

  System: What happens on two different PCs over the WAN even in two different places using two different print servers and four different printers (Xerox 3 and 1 HP). Documents that have this problem come from different sources.

  Windows XP and 7 PCs were used

  Server 2008 and server 2003 are installed on print servers

  Solved my problem here. I managed to solve the problem by choosing "print as image". I don't know in the PDF file causing the printing problem.

• Satellite A10 won't begin until after several removals of battery

  I have a Satellite A10 I bought in 2003. Since I have it, sometimes just does not start. I press the Start button and nothing happens. So, I have to remove the battery and put it back in, then try again. I have to repeat this step up to 6 times before it starts. Sometimes it starts right away, but in most cases I have to go through this procedure. If I ever get the battery completely, same thing. He will start only after trying it several times.

  I figured out that if she had been closed only a few hours ago, it has no problem starting. But in the morning, after having been turned off for 12 hours or more, that's the problem.

  So far it has always started after several tests, but I'm afraid someday he will stay dead. If someone had the same problem and knows if there is help?

  Hello

  In my opinion, there is definitely hardware problem and this behavior is probably defective electronic power responsible. Because of this, I put t believe you can do something to make it better. I recommend you contact the partner of service allowed in your country and explain the situation.

  If you need addresses you will find under http://eu.computers.toshiba-europe.com/ - Support & downloads search for an ASP.

  Good bye

• 360 13 inches x spectrum: spectrum x 360 8.1 Windows stops to get into sleep after a few hours

  My x 360 spectrum stops to get into sleep after a few hours of normal behavior.  In other words, when the computer is started first, he put on standby and Hibernate mode then normally after the specified idle period.  It can then be woken up and work normally and then to go back to sleep after inactivity - during a few hours.  It stops working after the computer has been for a few hours.  I don't know exactly how much time must be in place before this problem starts, but once it ceases to be able to sleep, the only way to solve the problem is to reboot the system.  Once the problem occurs, the computer turns off the screen but that's it.  He will sleep if I do it manually by pressing the button of power or a click on the Windows button and forcing them to sleep or hibernation.

  I watched powercfg /requests and there is nothing listed that could prevent sleep.  I ran also report with fluo compact powercfg and it also does not list something that prevents apparent sleep.

  NOTE: The energy report is also EVEN if the system still works correctly.

  I could use help to determine what is the cause of this condition.

  Thank you.  See below for diagnostic information:

  Here is the result of the /requests powercfg command:

  C:\Windows\System32>Powercfg /requests
  DISPLAY:
  None.
  
  SYSTEM:
  None.
  
  AWAYMODE:
  None.
  
  PERFORMANCE:
  None.
  
  PERFBOOST:
  None.

  Here is a release of energy report (Note: site Forum HP changed the HTML code):

  Power efficiency Diagnostics report
  X 360 computer name
  Analysis time 2016-01 - 06 T 15: 16:32Z
  Scan duration 60 seconds
  System manufacturer Hewlett-Packard
  Product system name HP spectrum x 360 Convertible 13
  Date of the BIOS 10/23/2015
  Version of the BIOS F.2D
  Build OS 9600
  PlatformRoleMobile platform
  Plugged In true
  Number of processes 164
  Contexture 1892
  Report GUID {f8670991-ccc2-4c9e-b743-81cb15d13b03}
  Results of the analysis

  Errors

  Suspension device: USB get USB selective suspend
  This device is not in the State of selective suspension of USB. Processor power management can be prevented when the USB device is not in the State of selective suspension. Note that this problem will not prevent the sleep system.
  Name of device Microsoft mouse and driver detection keyboard (USB)
  Host controller ID PCI VEN_8086 & DEV_9CB1
  Host controller location PCI bus 0, device 20, function 0
  Device ID USB\VID_045E & PID_0745
  1 port way

  CPU utilizationrocessor use is high
  The average CPU utilization during the trace was high. The system consumes less power when the CPU usage average is very low. Examine the use of the processor for the individual processes determine the applications and services that contribute the most to the total CPU usage.
  Average use (%)     11.12
  Platform power management capabilitiesCI Active Express - State Power Management (ASPM) disabled
  PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.

  Device drivers:
  Devices with missing or misconfigured drivers can increase energy consumption.
  Card device name Cisco Systems VPN for Windows 64-bit
  Device ID ROOT\NET\0000
  State of the device 0 x 1802401
  Code 0 x 16 device problem

  Caveats

  Platform timer resolutionlatform Timer resolution
  Default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the resolution of the timer is increased, processor power management technology may not be effective. The resolution of the timer can be increased due to media playback or graphic animations.
  Current resolution of the clock (100ns units) 10007
  Maximum Timer (100ns units) 156250
  Platform timer resolutionutstanding Timer request
  A program or service has requested a resolution of timer is smaller than the maximum platform timer resolution.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 8464
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.48
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 1360
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,58
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 9788
  Average use (%)     1.08
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name HPSF.exe
  PID 11968
  Average use (%)     0.71
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\System32\win32k.sys 0.10
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll 0.10
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name netsession_win.exe
  PID 5828
  Average use (%)     0.67
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.10
  \Device\HarddiskVolume4\Users\Zeldar\AppData\Local\Akamai\netsession_win.exe 0.04
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 5712
  Average use (%)     0.63
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome.dll 0.35
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.11
  \SystemRoot\system32\ntoskrnl.exe 0.08
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process system
  PID 4
  Average use (%)     0.55
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.05
  \SystemRoot\system32\DRIVERS\dne64x.sys 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process explorer.exe
  PID 3988
  Average use (%)     0.43
  Module Module average use (%)
  \SystemRoot\System32\win32k.sys 0.15
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 7920
  Average use (%)     0.39
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.22
  0.14
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name WWAHost.exe
  4604 PID
  Average use (%)     0.28
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.10
  \SystemRoot\SysWOW64\ntdll.dll 0.03
  \Windows\SysWOW64\jscript9.dll 0.03
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name UoipService.exe
  PID 2544
  Average use (%)     0.25
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\system32\drivers\afd.sys 0.02
  \Device\HarddiskVolume4\Windows\System32\mswsock.dll 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 6600
  Average use (%)     0.24
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,18
  0.04
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.00

  Information

  Platform, resolution: timer Timer application stack
  The battery of the modules loaded for the platform timer low in this process.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Call stack \Device\HarddiskVolume4\Windows\System32\ntdll.dll module
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\WPF\wpfgfx_v0400.dll
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll
  Political power: Active Power Plan
  The current power in use plan
  Plan custom name
  Map of GUID {e427f965-afc6-4f07-b387-e9be116f159e}
  Power politicsower Plan personality (on battery)
  The personality of the current power plan when the system is on battery power.
  Personality power saver
  Political power: video quality (on battery)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Mode of quality balancing video quality and energy savings
  Power politicsower Plan personality (Plugged In)
  The personality of the current power plan when the system is connected.
  Personality power saver
  Political power of political power Radio: 802.11 is a maximum Performance (Plugged In)
  The current policy of power for compatible 802.11 wireless network adapters is not configured to use reduced consumption patterns.
  Political power: video quality (connected)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Quality optimization for video quality mode
  Success of queries: analysis of system availability
  The analysis was successful. No problem of energy efficiency have been found. No information has been returned.
  Battery information: battery
  Battery ID Hewlett-PackardPrimary
  Manufacturer Hewlett-Packard
  Serial number
  Chemistry LION
  Long term 1
  0 seal
  Nominal capacity 54720
  Last full 54720
  Platform power management capabilitieslooking at the States of sleep
  Sleep States allow the computer to access the modes low power after a period of inactivity. The waking state S3 is the State of default Eve for Windows platforms. The waking state S3 consumes only enough power to preserve the contents of the memory and allow the computer to return to work quickly. Very few platforms are supported States S1 or S2 sleep.
  False S1 sleep taken in charge
  False S2 taken sleep support
  True S3 Sleep taken in charge
  True S4 sleep taken in charge
  Platform power management capabilities: connected standby support
  Connected standby allows the computer enter a low power mode in which it is always on and connected. If supported, connected standby is used instead of the system sleep States.
  Connected supported watch fake
  Platform power management capabilities: Adaptive brightness is supported.
  This computer allows Windows to automatically control the brightness of the built-in display.
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 0
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 1
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 2
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 3
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Controls of Type ACPI Performance (P) performance / Throttle (T)

  I found a thread on Microsoft answers community web site.  Unfortunately, it seems that Microsoft has not fixed even though this thread is over a year.  This has been driving me crazy.  In any case, the problem is with Windows 8.1 and is caused by the use of a Microsoft account to connect to the computer.  If the account is not connected, after a few hours the computer stops to fall asleep.  If you close the MS account, then the computer will sleep normally.  My dose is to convert my connection from the local computer to a local account and disconnect from Microsoft.  This process is easy to do, go into the settings of PC and disconnect the account.  It will keep your original profile.

  Here is the link to the thread that got clued in the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-refuses-to-sleep-automatically-idle/6ab4aaaf-31bd-4baf-ABC6-62ba8c8260aa?DB=5&page=2&rtAction=1452178632575

  I consider this resolved issue that HP is concerned.  Microsoft needs to address the issue.  I'm not interested in switching to Windows 10 for compatibility reasons and, in this regard, the same problem can exist in the W10.