Bater a one Energ

Similar Questions

• What is vlp.bat?

  What is going on? All 30-minute class hours, the windows command shell opens. The title bar displays "Administrator: vlp.bat. The cursor blinks just so nothing happens, but I'm not a computer expert. The vlp.bat file found in Windows/Basic 5 other batch files.

  This could be the cause. A few days ago, I downloaded a CMS that I wanted to test on localhost Brothersoft.com. The installed Strongvault Downloader automatically. No opt-out method was provided by the Downloader Brothersoft.com. This seems to be when he began to arrive.

  I had deleted Strongvault and this was still happening.

  Strongvault has left dozens of topics at the root of the registry. I deleted those and what is still happening.
    
  I deleted the basic/Windows folder and files of 6 orders in, vlp.bat was one of them, and now it does not more, problem solved.

• Molt them imaginal don't quit on Windows Vista Ultimate x 64

  I have a new machine Vista Ultimate x 64 and have installed a bunch of simulators (and tools Eclipse, JDE and normal plugin dev).

  When I run, for example, 9000.bat, to one of the directories Simulator (or if I run for debugging of Eclipse), it works fine. Until I do file/exit or double-click the button close the window. Then, nothing happens. Simulator menus have not been frozen, but the BlackBerry does not respond and take flight never quits.

  I can force stop with taskmgr.

  I tried several 4.6.0 and 4.7.0 sims.

  It is a known problem and you can get around by the assassination of task...

  See you soon...

• Can not find the download / installation package for Services of ripple.

  I see a lot of posts talking about the fact that I should just "start and run the services of ripple" to test and debug my app phonegap/cordova.

  I can not however for the life of me figure out how to start waving services.

  It is not in /program files/ripple, this isn't in program files/research in motion/ripple

  I've never seen or downloaded a specific package to the ripple.

  There is nothing called ripple - services.bat in one of the directories of SDK WebWorks 2.3.1.5 \BlackBerry.

  the CRX ripple file does not install in chrome, if I drag on--but I could get through the chrome Web store.

  I'm hosting the site via APACHE, but none of my plugins are testable in ripple which means that I have to run the Simulator (slow) or (slower) charging for all debugging device... What is worse is that I cannot debug any javascript except in chrome... which means since I can't access one of the plugins (barcode scanner (, a home-rolled prepared by myself), I have no idea what's going on.

  Can someone help me find links to what I'm missing?

  To install the CRX, you need to drag onto the page to chrome://extensions

  Once you do this, you should have a ripple the button to the right of your address bar. Go to the page in question and click the button.

  I hope you get closer!

• Simultaneous use of the vmscript call on the same virtual machine.

  I'm trying to call vmscript allows you to execute commands on a virtual machine. Several applications can come to the computer virtual target (where the script is executed) from different sources. When I make a call at the same time, it works very well.

  However, when I make simultaneous calls to invoke vmscript to run a command on a remote computer, only one runs and others fail with the following error.

  23/12/2013-14:52:21 Invoke-VMScript operation is not allowed in the current state.

  23/12/2013-14:52:21 Invoke-VMScript error occurred while running script on the guest in "v7012-s1-arr1" VM operating system Cannot find script interpreter "Bat" in one of the spaces provided.

  You probably don't have enough permissions to execute the command in the comments.

  Even if the error mentions privileges, I'm sure that it is not only the privilege as it works if I run commans an establishment at the time.

  Assuming that invoke vmscript supports concurrency - y at - it target configurations I need to put on the virtual machine to allow the operation?

  As far as I know, the mechanism that uses Invoke-VMScript cmdlet, does not have parallel calls.

  As a bypass, you could use a try - construction of wrestling to synchronize different calls.

• Someone found VCB 1.5 suspension custom scripts?

  Hello-

  I am trying to run scripts of standby on a w2k3 virtual machine. I'm running ESX 35.U2 / VC 2.5U2 and VCB 1.5. According to the machine backup Guide virtual pg 52, freeze and thaw pre scripts after are now under C:\Program VMware Tools\backupScripts.d.
  
  For before the Frost, it says "all the scripts are called in alphabetical order with gel like first growing argument." I created a pre-antifreeze - script.bat and one freeze_script_1.bat under this directory. None worked. In addition, C:\windows\pre-freeze-script.bat does not either...

  Is there a file name for this convention? Any help would be appreciated...

  Dave

  Dave,

  There should be no special appellation as not necessary fo the scripts under C:\Program VMware Tools\backupScripts.d\

  Can you post the thread tha VMTN you referred in your post?

• Video is de-energized when on a call with more than one person

  Hello

  When I'm a Skype call to a video person works very well, but when there is more than one I can no longer see the other participants. There is also no button to end the call and the only way to get out of the call, it's be quiting Skype and it starts again.

  It used to work in the past and Skype was great if not sure whats going on. I'm on Win 10 64-bit with Skype version 7.25.0.106

  Someone at - it ideas?

  Your Skype is not always connected to the Cloud server.

  The correct State shall be:

  Status: NetStateConnected

  Check your hosts filein Windows, DNS/VPN/proxy settings.

  Try first to reset your Windows hosts file:

  https://support.Microsoft.com/en-us/KB/972034

• I'm having problems to make one of the 3rd party fitness on my watch applications

  I'm having a lot of trouble getting my watch to load up one of the applications of 3rd party fitness. Apps for example Strava & Wahoo fitness... In particular, two applications have support iwatch announced when download you from the App store. You don't know if there is a problem with my watch or not because I recently bought a wahoo HRM ability that has the Bluetooth, etc & I paired with my phone, but trying to make a pair of Bluetooth with my watch looking for Bluetooth 'of health devices"it captures anything. I tried to obtain the support of Strava thinking it was their app, but I did exactly what they said to do IE désapparier shows, to remove and reinstall app & his continues to do exactly the same thing. Both apps show on my watch, but when I select to load just makes the circle of reflection and then the app is de-energized so it brings back me to the screen of application on my watch. I've updated my privacy settings to let my watch & the apps read each other, but still does not.

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software.

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  If not, try the following steps, trying to open the application after each:

  • Place your Apple Watch on its charger with power connected and also connect your iPhone to the power.
  • On your iPhone: open the music application and start playing a song (through your iPhone pregnant is fine).
  • On your iPhone, in the application of the watch, go to: My Watch (tab) > scroll down and tap the name of the application that does not open > turn off the option to show App on Apple Watch > to pause for a few moments > turn on the option.

  If this does not resolve the problem, the other recommended steps is trying to disconnect and rematching of your watch. As you've already tried this, you can ignore this:

  • The app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.
  • Choose to restore the watch (backup restore) when provided the opportunity during the whole. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
  • Cancel the twinning of your iPhone - Apple and Apple Watch Support
  • Set up your Apple Watch - Apple Support

  More information:

  Get help with applications on your Apple Watch - Apple Support

• L7680 all in one driver for Windows 8 Preview Release

  Is there a driver of L7680 all in one printer for Windows 8 Preview Release. The Windows 7 driver/software used to work very well for Windows 8 preview of consumer. But when I tried to install this software for the visualization of the 8 version of Windows, the installation process just hangs...

  Hi kf4bef2m,

  See the document below for win 8,

  Printers supported for Windows 8

  Win 7:

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79354-2 & CC = US & DLC = in & LC = on & os = 4063 & Product = 2512009 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79354-2 & CC = US & DLC = in & LC = on & os = 4063 & Product = 2512009 & sw_lang=.

  10. run the download to reinstall the printer

• All-in-one HP Officejet J4550: hp officejet j4550 all-in-one

  My moms computer was installed by my father and already the installation of the printer. She then began having some problems when printing lines by slots empty words in words. I tried cleaning the printer option, but that has not worked, also tried the alignment of cartridges but that also had problems, sometimes it could not detect the scanner test sheet and then we would say a mistake and return to the default settings. I was then going to the computer application, but he missed. I guess that when it was installed, it was not a complete installation.

  I then started to re - install from the cd without uninstalling it first. Thought it would be OK and just replace the existing files. Sometimes, this works for programs and sometimes you will need to uninstall first. When I loaded the cd it says that this version of windows was not compatible. Then, I searched the net and found this thread of Hp.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Windows-7-and-OfficeJet-J4550-install/...

  I downloaded the new installation for win 64 files and down them, before he installed it there was an error (empty white error with a red x) and it wouldn't install. Then sent information to HP and said it has found a solution and downloaded to the desktop. Basically, he wanted to fix my installation but unplug the printer. So I did this and it worked fine during installation. Then when he got at the end during the setup I got a fatal error. Something about the configuration has expired or has been too long and we also found several files of HP. So he started to uninstall itself. I thought having bad uninstall programs, then put it back. So I did, worked well until the config part and then he did the time out or another error. The mistake of never came however duplicates. So I cancelled as fast as I could. I can print and scan from the program on the pc. But it lacks the features of the printer itself. As if I hit him scan it tells me to consult the manual. I just want to complete installation work. Any thoughts?

  I did all the steps, downloaded the packgage, uninstalled using l3.bat, did drop cleanboot, reboot, update adobe Flash Player as well as cleaning. Download the hp installation wizard. When running the wizard, it says there is a problem with my driver, then it starts to connect to the internet to download the software, but then said the download was cancelled, click Retry to try again but the retry button does not work. I have mcaffee AV, the only way ive seen turn off is to disable on the analysis of access and the firewall.

  Don't you have an another clean boot and no driver error, but the same error message when the installation wizard attempts to download the full software. Simply use the version of the software from the link has me http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645096#Z7_3054ICK0KGTE30AQO5O3KA30R1

  FINALLY HE GOT WORKING:

  Downloaded the basic print and scan driver package, ran the installation and it did not work. I started to think there must be a driver problem. Had similar problems with itunes where it wouldn't read my ipod even after an uninstall and reinstall. And for that I had to remove the driver and reinstall it, for some reason any it was causing problems.

  Make sure the name is exactly the same as the folder. After its extraction do the same for the complete package. After extraction, a HP screen may pop up, just close for now.

  1. If the printer software is installed, uninstall it.

  2. with the connected printer go to devices control panel\ Manager, right click on your printer and click on uninstall. Check the box in the lower right corner that says something like "Do you want to remove the software driver or files" then click on uninstall.

  If box is displayed, and then click cancel, right-click on your printer and select Properties, click on the driver tab at the top, then the Details button pilot. make a new file .txt on your desktop and enter in all of the files and the locations of eveything that appears. After that click OK, then driver tab, click on uninstall.

  Here are some of the files and locations but check they are all listed and not missing anything.

  c:\Windows\system32\drivers\usbscan.sys

  c:\Windows\system32\hpotscl1.dll

  c:\Windows\system32\hpowiav1.dll

  3. open a new file and copy and paste the address of each file in the search bar. It will look something like this

  c:\Windows\system32\drivers\usbscan.sys

  before hitting enter each need to be edited windows otherwise think you try to open the file rather than access the folder. So for the modified example will look like this

  c:\Windows\System32\Drivers

  the drivers folder is what you want to be in and the usbscan.sys is the file you want to check is removed. Do this for everything in your list. If the files have disappeared that has, if not manually delete them or move them to a new folder on the desktop until installation is complete just in case.

  4. (computer may or may not need to be restarted) and then unplug the printer, open the software package and the base driver and double-click setup.exe. Do the installation and when it asks you to connect the printer.

  5. after its installed according to your needs, you can either test its features to see if it has what you need or you go to install more packages / programs from the full version.  Double-click setup.exe for the full package, then it will ask you that you if you want to uninstall or install more software, select the installation of the software. He can just show 1 or maybe a little. If its does not display those you want to click on the buttons more or less recommended until you find what you are looking for. You can try to install more then one at a time, but for me it did not work, I had to do one at a time.

  As far as the folders on the desktop used for extraction, it is a good idea to keep those with your backup files unless you use a restore image, but it good to keep because the backup even images may have problems. I would recommend save their be on a cd/dvd, USB drive, external hard drive, the cloud storage lol somewhere just in case you need it again as well as installation instructions. If you have moved all the files in the driver instead of delete and your printer now works, you can remove them.

  NOTE: If keeping the package for later use, Exchange compressed files for those who have been extracted because they take less space. Unless you want to just the ones extracted. (Compressed are those you downloaded from HP in the folder downloads, extracts are those in the office used for installation folder.)

  And thank you Gemini02 for helping me with this.

• HP 1315 all in one printer, windows 7, can not find the solution Center.

  Mr President

  It was working fine, 1315, printer all-in-one. lately every print, I had off and ON the machine. Today, to uninstalled and then downloaded from the additional driver section all the reqd. I installed. but the main exe from the file ' AIO_CDB_NonNet_Full_Win_WW_130_141 '.

  do not settle. ...

  " Solution Center is not installed and to get hp support, I downloaded hp printer scan cylindre diagnosis and when I run... another message comes" hp photosmart essential scan.msi isn't available... what shud I do?

  I don't know what to do next?

  kindly help.

  Hello pajitmenon,

  Seems that the installation of the software is corrupted somehow. I recommend "rubbing" the software current and 'nine '; To do this, follow the instructions below:

  1. click the Start button and type %temp% enforcement

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download (again) the drivers and full software functionality from the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1 & CC = US & DLC = in & LC = on & os = 4062 & Product = 374568 & sw_lang =

  10. run the download to reinstall the printer

• Blue screen on HP on HP all-in - One PC Vision

  Hello. For the last week or so my PC all-in-One was bat with a blue screen every time that comes out of hibernation. It seems not serious if it went into hibernate on its own, or through start-> sleep action. The blue screen usually indicates a page KERNEL_DATA_INPAGE_ERROR error.

  I restored my system to attempt to repair. He did, for a while, but today it started again.

  A few web searches made me suspect that it is a manifestation of problems with the fix for Microsoft KB2670838. Other users have reported blue screens after installing (usually as a sine qua non for IE 10), although I have not seem to reports of what happens after a sleep, as it is for me.

  Others hit this kind of problem? Suggestions on solving?

  I intend to uninstall this hotfix, see if it helps. I'll report.

  The number of my all-in-one PC product is

  HP Vision 120-1026

  (Sorry, I wanted to include it).

  I ran the diagnostics twice, but no problems were found with the S.M.A.R.T. tests or anything else; all the past. In addition, the hard drive is not that big by today's standards, just 685GB (not 1 TB or more as suggested the fix).

  I have some good news, however. During the uninstall of the KB2670838 bug fix only made no apparent difference, I managed to solve the problem by using the system restore to restore my system to the first point of restoration, this day here. Thus, it seems that it is triggered by a Microsoft Update, but not pain causes one on other systems.

  I configured my system for manual updates now and will see if I can identify the culprit was updated.

• OfficeJet pro L7780 all-in-one: full functionality of the driver and the software crashes to configure product.

  Windows Home Premium 64 bit operating system. Download full feature software and driver and follow the installation instructions. All software and drivers seemed to install but at the last stage (configure the product), it crashes after a few minutes and a fatal exception message (no error number). After this, uninstall all the software.  I took the following troubleshooting steps:

  Disabled all the normal startup items and services (except Microsoft) in MSCONFIG. As an administrator, and under Vista compatibility also led installation.  In addition, tried a basic installation.  My computer is a Dell PHE 8500 and is wireless. I tried installing several times in respect of the connection of the USB cable directly and wireless, but all had the same result. Completed all the steps except the last where the fatal error message appears after a few minutes.  Help

  Thought I would give it another chance: I've done the following:

  Ran L4uninstall.bat

  American ran Care System: registry clean and disk cleanup

  Connected accessories/tools disk cleaning system

  Restarted

  Insured that lates version of Adobe Flash Player has been installed

  Latest version of the software downloaded to the printer

  Went into MSCONFIG unchecked load startup under selected startup items checked "Hide all Microsoft Services" and disabled the rest of services under services,

  Restarted

  A ran another check of the register with the American healthcare system

  Ran disk clean again

  Off DSL modem

  Firewall and AntiVirus disabled Norton

  Restarted

  At installation of the printer as follows: first of all installed drivers

  Restarted

  A ran the remaining printer one by one with Solution Center last softerware

  Restarted

  Is surprised that Solution Center has worked without problem

• HP c4580 Photosmart All In One: hp c4500

  I have an error message which prevents me from printing. I have recently upgraded to Windows 10 but HAVE been able to use the printer since.

  In the settings it tells me that the program is not available. That is to say the same for Photosmart Essential

  I tried to remove uninstall these programs by clicking on. However, after a few minutes, he cancels the deletion with a message indicating that the application was not complete in a timely.

  I tried to download and install the driver being upgraded, but it won't download (it stays on 0%).

  Ideas please

  Hello

  Thank you for using the forum.

  Can you do a complete uninstall of your printer and try again?

  Can you try the suggestion of the expert next to L3.bat and then try to reinstall the printer?

  http://h30434.www3.HP.com/T5/LaserJet-printing/how-do-I-do-a-complete-level-4-uninstall-of-the-print...

  After uninstall, can download you the full software features from this link:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4500-all-in-one-printer-series/3575173/model/3575174#Z7_3054ICK0K8UDA0AQC11TA930C7

  After you download the full features software, install the software.

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• Registry with D110 problem all-in-one

  I have a Photosmart D110a an All in.  I am running windows 7 (64-bit).  Following a failure of scanning, I used all HP diagnostics and tried several reinstalltions.  I can't delete one of the D110 facilities using uninstall. He remains in programs and features.  When I try to reinstall it indicates diagnosis and fatal error telling me there is an error in registry to reinstall, but that does not cure the issue.

  All right.  It will be a little difficult to fix, but I should be able to help get uninstalled everything, get the registry cleaned and reinstalled everything and functional.  First thing to do is completely uninstalled everything.  To do this, you need a special type of uninstall called a L3 uninstall.

  For L3 uninstall:

  1. Run a disk cleanup to clean temporary files on your computer.
  2. Download full feature software and drivers, then save them to your desktop.
  3. Run the download from the office.
  4. Once the installation is completed extract, cancel the installation.
  5. Click the Start button.
  6. Type % temp % in the start search box and press enter on the keyboard.
  7. Find and open the folder 7z containing your installation files (if you have disk cleanup, it should be the only file).
  8. Open the Utils folder.
  9. Open the folder of the CCC.
  10. Run Uninstall_L3.bat

  To uninstall all the HP software that goes along with the printer.  After the L3, you will need to clean your registry.  You can do it manually, but I would like to use a tool, just to do it faster.  You can use any tool you are more comfortable, but if you do not, I use Advanced System Care.

  Once the registry is cleaned, use the download to your desktop to install the printer.  Don't forget to right click and run as administrator, if the installation has all the write permissions to install the right.  Install each program one at a time, to avoid any fatal errors more.  Let me know what happens.