OfficeJet pro L7780 all-in-one: full functionality of the driver and the software crashes to configure product.

Similar Questions

• Installation of the HP Officejet Pro L7780 all-in-One

  HP Officejet Pro L7780 all-in-One

  Windows 7 64 bit

  Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure->

  I run the program "to add a series of all-in-one Officejet Pro unit

  I chose the wireless connection

  The program runs and find a printer 'Officejet Pro L7700' I select it and click Next

  He runs the installation for 5-10 seconds, and then it says that the printer was not complete.

  I ran the install several times (also after restart the printer and the computer) moved always

  The connection of printers is configured properly, to the best of my knowledge.

  It also print documents computer wireless. My problem is that I can't scan a document to your computer. When I choose the scan of the computer, it tells me that there is no scanning settings.

  I have no idea what to do...

  Hi RazorkillerC,

  You can scan from the HP software successfully?

  1. open the Solution Center, and then select settings

  2. select scan settings

  3. delete the shortcuts on the right side

  4. click on the device to update, and then close the scan window

  5. open again the scan window

  6. add shortcuts on the left side to the right side

  7. click on the device to update

  8. try scan from the front panel of the printer

  

• HP Officejet 4500 Wireless all-in-One impossible to install the software

  Scan feature did not work. I use a 64 bit of Windows Dell 8.1 System. Troubleshooting said I had to download the full software. I downloaded from HP as shown with success. I uninstalled the old software HP, then restarted the computer. Then I tried to install the new full features software downloaded. The installation wizard appears, and the software files are checked. The software tries to find my device and soon comes up with a message saying that I need to download the full features software (again, that I am in a loop). Now I can't print because I uninstalled the software I used before I tried to fix the scan.  Help, please.

  Hello lstoneham,

  Welcome to the HP Forums.

  I see that you have a problem with the installation of the printer to your computer Windows 8.1.

  I have a few steps we can try to solve this problem of troubleshooting.

  I'll give you a series of documents and tools to use to remove the old software and drivers as well as the updated software and drivers via a download.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  If you have the printer connected to the computer with a usb cable, please remove the USB from the printer and the computer and leave it disconnected until further notice.

  The first link, I will give you is for HP Officejet software and driver removal utility.  Please save the file to your desktop as it creates it's own icon.  It will be easy to find when the download is complete.  Double-click the new icon and follow the instructions.

  Once the uninstall is complete, reboot the computer.

  When the computer is powered on, please go and disable the firewall or anti anti-virus until the relocation is complete.

  The next step, we are going to do is download and register HP Officejet full feature and driver software on the desktop.  This will still create it's own icon.

  Double-click the new icon and follow the instructions for installation.  The installation will prompt you as to connect the usb cable (if this is the type of connection you want us) so please do not connect before hand.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• I have an officejet pro L7580 all in one that I lost the cd and downloaded the full software.still didn't work?

  I have a new PC, windows 7 Pavilion p6000 series, but it says that my printer is compatible? I lost the installation cd of it he went then to the downloaded HP full version Web site, I see in my documents but do not know how to run or open properly. What I am doing wrong? I must say how disaponted with HP, I am because of him misleading communication error/problems and now they did not treat the 39.99 to guarantee of my printer and now say at the end? Can someone help me get my printer doesn't work, I really appreceite it. Thank you & God Bless

  Hello

  All the drivers are in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=2512008#N201

  As you already downloaded it, simply install them like install a program (double click or run as administrator).

  Kind regards.

• can not find printer to computer hp officejet pro L7780 all-in-one

  I recently tried to print and my printer can not be found that I don't have the disk that's come with the printer, it is lost and he always tells me that it cannot find a printer

  What operating system?

  Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en&os=4063&product=4083977&sw_lang=

  What did he say?

• HP Officejet Pro L7680 All - in - One will not print black

  Original title: HP Officejet Pro L7680 All - in - One

  I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

  Hello

  This forum is for comments on the Forums for answers and you should ask at your
  questions in the Windows Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  It also helps us to help you if all the useful information.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==============================================

  In this case you should check with HP Support, their documentation online and drivers,
  and ask questions about known issues in the forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

  Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

  I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

  I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

  The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

  I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

  Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

• OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

  I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

  Hello

  Sorry, but the printer is not supported on Windows Vista 64-bit.

  64-bit support is only available in Windows 7 or later operating systems.

  You can find the printer specs below:

  Vista 64-bit is not supported.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

  Respect,

  Shlomi

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• I have an Officejet Pro L7580 all-in-one. How do you find the printer did how many copies?

  I have an Officejet Pro L7580 all-in-one.  How do I know how many copies the machine made?

  Dragon-fur (unusual name!)

  Thanks again for your suggestions, which led me to the answer.

  Looking more closely at the options in the HP Solution Center, which I thought I had already exhausted, I followed these links - settings, print settings, the Toolbox for printer, information, reviews, myprintmileage, source, which led me to the total number of pages, number of total jobs and many other information, which, apparently, is monitored by HP.

  Thanks for the clues get me there.

  Kind regards

  Tony

• HP Officejet Pro 8600 All in one – elbows / folds document

  I have a HP Officejet Pro 8600 all in one. I've used it for almost a year and recently when I print on plain paper my doc over dating a turn on paper. The elbow is always in the same place, 2 1/2 "from the top of the page. The crumpled section is about 1/2 "in length. Impression of quality and all the rest is good.

  I printed a few pamphlets with this printer using heavy paper for brochure of gasoline that does not bend like my regular stock. Any ideas.

  I have the same problem, but just behind the box!
  IT IS SHAMEFUL! The printer is practically unusable!

  Sometimes it shredded paper!

  The printer driver is also very basic, compared to Canon for example.
  On top of that, it does not save the changes to your settings,
  We have to bury in the HP software!

  Also, the printer is unable to make a copy without border.

  And last but not least the printing quality is very poor.
  my printer Canon does better printed with generic ink...

  It is also large and noisy.

  I completely regret my purchase.
  I can't even sell it now as it's deffective.

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• OfficeJet Pro 8500 All in one – disappear from the HP Solution Center guard

  Background:

  I have two HP all-in-one devices, at the office of one while a 8500 A909a and at home and Officejet 7310 all in one.

  My Dell laptop running Windows 7 Professional 32 Bit.

  I had the laptops and printers for several years, the two were connected through connectiosn fine wired via routers with printing/scanning also up and running by the HP Solution Center.

  If I work in the office and he wanted to scan a document I woul open Solution Center and left two printers would come to the top. I could click on the installed 8500 in the office and it worked fine. Even if I was at home I opened Solution Center, click the 7310 and could very well sweep.

  Problem:

  In recent weeks the 8500 keeps disappearing from the HP Solution Center. He still appears in Control Panel and other applictaiosn of windows like Word and I can print again, BUT not is more visible in the solution Center.

  I load the installation of the driver software (recently downloaded from the website of HP, file name OJP8500vA909_Full_14 (1)) and charging/install the 8500. It takes about 20 minutes to make. The 8500 appears then, but with a suffix like Officejet 8500 (7) after him in the solution Center.

  I can scan then very well but the next day when I start and get to the center of the Solution, it has disappeared again. It's infuriating and wastes a lot of time.

  Please tell us what can I do to load the correct software once and for all for allowing me to use two printers without them disappearing from the solution Center.

  Thanks in advance.

  Hi HPhep42,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  Driver and complete software of HP Officejet Pro features

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• OfficeJet Pro L7680 all-in-One: HP Officejet Pro L7680 all-in-One

  Yellow & blue color on the machine being empty cartridges, the machine doesn't let me print anything in black ink only.  It cancels the print job.  I want to use the black print cartridge (large & 1/2 full) before installing the new HP all-in-one, I bought. The black cartridge is expensive, about $70 + as I recall, & I'll be doomed if I lose.  Anyone know of any way to get around in blue & yellow cartridges so I can print in black?  This kind of greed on the part of a business is driving me crazy.  Any help would be greatly appreciated.  Thank you.

  Change the printer in gray scale, see the Manual pg 164.

• All-in-one Officejet Pro 8620: officejet pro 8620 all-in-One scan negative

  How to scan negatives and 35mm on a HP Officejet Pro 8620?  I recently read it is possible on older versions, but can not find all the information about the printer I have.  Please answer quickly because it's something I have to do for my business.

  Hello

  Negative scanning requires a special film holder (as in This example), indeed such was offered by older models and not in the past years.

  The 8620 do not offer this kind of functionality, as well as any current inkjet all-in-one device and you can't scan negatives with your printer.

  Only proffesional scanners offer a these these days, not all in one of the devices.

  Here's the only model I have managed to find to your purchase today, there could be some more and it's worth trying a such google searh:

  Digital flat HP Scanjet 5590