battery dose not last

Similar Questions

• battery does not last long in i pod classic 80 GB

  battery does not last long in i pod classic 80 GB

  Replace the battery. You can do it yourself, the parts are cheap online, or find a company that will be maintenance for you.

  TT2

• Microsoft mouse 3500 battery may not last long and keep the LAG

  I bought a mouse Microsoft 3500 Feb 2011, when the battery is finished, I replace it with the same brand new even one, with the previous battery that come with the mouse, after I have change the battery it only last for 5-6 days. The Dungeon of the problem exist, battery not last long. Continue to change.

  Another problem is my mouse keep lag when I use, plug another computer also same problem.
  He moves such as not so easily, keep the LAG, lag, move.
  When I make a comment at Microsoft Corporation, they replaced a new mouse Microsoft 3500 for me, the same problem with the mouse.

  Hello

  I suggest you to contact the support material for better assistance.
  http://www.Microsoft.com/hardware/en-us/support

• Satellite L750 - battery does not last 1 hour and does not completely load

  I have a L750 and battery not work duration 1 hour and will not be completely free

  Is it normal that it's not even 12 months old

  It is not easy to answer your question. I would say that this is not normal, but unfortunately it happens. I'm afraid that you can't change anything except to change the power settings and try to reduce the power consumption of m.

  As Akuma already written maybe it's both for the replacement of the battery.

• Camileo X 150-battery will not charge

  Hello all - I bought a camcorder Camileo X 150 nine this week. The camcorder only has power when it is connected to the power adapter or the USB cable. I tried to load it on Friday, had died eight hours, came back and the battery still had no power. Then last night I load from one day to the next, still no power this morning.

  I tried everything to implement but it still does not power upward only when connected to AC or USB - maybe the battery is faulty or I do something wrong?

  I would appreciate any help with this issue.

  You did not... something wrong to charge the battery, you must connect the power adaptor only... then the battery should start loading...

  But it might be possible that the battery is discharged deeply (empty), and in this case, the adapter must be connected at least 24 hours...

  Then, check again, and if the battery would not charge even if the AC adapter is connected to a longer period of time, get in touch with your dealer camcorder...
  Maybe the battery / camcorder is faulty.

• Connected battery does not support 11%

  Question, that of why the battery is holding at 11 percent, hip but not load? I can do to remedy this? What may cause this etc... ?
  
  Early in the morning of 10/07/2016 shows 11% battery not charge.
  
  I plugged last night during the 9 p.m. Mountain time.
  
  After connecting, I was running Utorrent 3.4.9 of the overnight download of some files.
  
  A pilot plant was held yesterday 373.06 out ready driver NVIDIA GEForce game date 10/05/2016 - cost very spotless and without incident.
  
  I have two cables of load. Both worked fine yesterday.  Both are connected to a different location on a different circuit. Overvoltage protected by Belkin.
  
  Thank you, and here are my coordinates of the system.
  
  Name of the operating system Microsoft Windows 10 home
  Version 10.0.14393 Build 14393
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name XXXXXXXXXXXXXX
  System manufacturer Hewlett-Packard
  HP ENVY 17 Notebook PC model system
  System Type x 64-based PC
  System SKU xxxxxxxxxx
  Processor Intel Core i7-4510U CPU @ 2.00 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.42, 18/03/2015
  SMBIOS Version 2.8
  Embedded Controller Version 77,53
  UEFI BIOS mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  Start secure State
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.14393.206".
  User name xxxxxxxxxxxxxx
  Time Zone MST
  Physical memory (RAM) installed 12.0 GB
  11.9 GB total physical memory
  7.90 GB available physical memory
  13.7 GB total virtual memory
  9.38 GB available virtual memory
  1.81 GB page file space
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  Hi @gdcgray,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you have a battery problem with an error "plugged in, not load ' and the battery does not fresh at all. It'll be a pleasure to help you with this.

  A remarkable work has been done by you by performing a basic troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  It certainly looks like the battery needs to be replaced. However, let's first establish that it is the battery and not the connector of battery on the motherboard that is defective controller.

  Please follow these steps.

  Please try a hard reset first. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and reconnect the charger
  • Please try to calibrate the battery.
  • Please update the bios from this link http://hp.com/drivers
  • Run the battery from this link: http://support.hp.com/in-en/document/c03467259

  Please run all the tests of components and if the battery is not please take note of the failure code.

  I hope this helps. Please let me know how it goes. I really hope that the problem is solved without hassle and the computer works great. Thank you for being a part of the community of HP. Please let me know if this can help, and if this is the case, please mark this message as a "'Solution Accepted". " Kudos would be also greatly appreciated for my efforts help. You can simply click on the ""Thumbs Up "button. "

  Thank you and have a blessed week ahead!

• Satellite L655 - battery will not charge

  Hello

  Can you help me please? my battery is not Toshiba Satellite L655, I buy my warranty ended last year.

  Whenever I have to remove the battery and put it in then the battery is in charge, the led for battery get yellow until it completes then the flashing of the led stop and if I unplug the power supply is working well but it won t load if I plugged in until I have remove the battery again.

  Thanks for help

  Hello

  I think that the new battery must be tested, but before you do make sure you use the latest version of the BIOS
  I mean its battery problem or electronic books power supply and before portable s equipment is turned on, the laptop must be tested using the new pile of work well.

• Battery does not charge, but by Satellite Pro L510 is running in battery mode

  Hi, I had a few odd battery problems these days:

  I had charged my laptop completely to 100% and then used it on the train on my way home (in Windows 7 64-bit), how I got it to about 70%, shut down normally, put it in my bag and left there until I got home. When I got home, I tried to turn it on but it lights and battery light orange blinking indicating that there can be no charge. I plugged it in and it worked as usual (Linux), so don't think too hard on this subject.

  Later I realized that the battery was still the load after longer that it should have been and running the acpi + (linux) command told me has the battery + charge, 0%, charge at the zero rate - will never fully charge. + I disconnected to see if it worked, and the battery lasted as usual, although always it's 0% charge rate.

  I started in Windows 7, and the battery reported that it was at 68%, so I assumed it was back to normal. A while later, I noticed that he was still 68%, despite having connected for a while - at least an hour. Start on linux, acpi showed data battery normal search, except that it was 'blocked' to 68%.

  I disconnected the laptop and run it as usual, and it ran until he cut; I guess with him out of power. I plugged it back in and it is 'charge' again, even if it is still 0% battery and "load at the zero rate".

  Before all this happened, the battery works well - apparently to 94% of its capacity. It would be modified for a few hours unplugged play movies or games.

  Summary: PC laptop battery suddenly going to works "attributed to the zero rate" and 0% complete; battery still seems to work very well, seems fresh and portable no power plugged in but the battery is not 'charging' or have his percentage of charge remaining increase.

  Someone at - it ideas? I have yet to try a BIOS update, but it seems that there is one available, so I will give that a try. I feel that the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.

  Thank you!

  Hello

  I think you should try upgrading the BIOS
  BIOS default value, and then try to charge the battery again.

  > get the impression, the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.
  Well, it of really difficult to tell if the battery or the mobo may be affected
  In my opinion, the battery must be tested without a doubt

• Satellite A110 battery does not & will not work if the battery is connected

  Hello

  I will try to regain control of the situation quite clearly.

  Product: Toshiba Satellite A110-149

  Works fine on AC adapter / CC (Eve just a summary of the problem but because of Gentoo Linux, this used to work under Windows XP)

  Original battery was dead. Not only there is no charge, but with this battery and the AC adapter absolutely nothing, not a single LED. No need to mention that I couldn't turn on the computer.

  Bought a new battery at Eforcity.com
  -Replace: PA3465U-1BRS | 10.8V | 6600mAh (71Wh)

  With this new battery and the AC adapter plugged in, I have the green power led and lighted orange recharge. But even after 8 hours and the computer off of the battery did not charge.
  If I try to turn on the computer with this new battery in and the AC adapter is plugged in it starts to run, but after awhile it stops automatically, no question weather I start or enter the BIOS.

  BIOS is Phoenix v1.50 and reset the default settings.
  Also, downloaded the last OS independent 1.70 - WIN (bios - 20090121162419.zip), but is there a way to update without Windows?

  I tried to just unplugged and press the power button several times (last test, I continued pressing more than 2 minutes for what counts)

  I have clean the contacts with alcohol.

  Would it be because of a fuse or capacitor I could replace myself or something?

  Any help would be grateful.

  Kind regards
  Charly

  Post edited by: glutton

  Hello

  I'm not quite sure what happened to the laptop, but first of all you need to know that laptop m should feed and must run properly if the AC adapter is plugged.
  The isn t battery required to power the unit if the power adapter provides power for the laptop.

  So if ONLY the battery would be affected, the unit must always turn sector.

  This is why I think that its a serious hardware issue for example motherboard problem.

• Satellite A300-1BZ - new battery does not charge

  Hello

  I bought a new battery (PA3534U-1BRS) because my old battery (3 years) hold office as well as it should!
  The new battery will not charge, the Red battery light suggesting everything of fine, but then begins to Flash after 20 minutes.
  When I turn on the computer the battery indicator on the taskbar in Vista tells me the device is turned on, but the battery won't charge.

  The company where I bought the battery has issued me with a replacement, but I'll always have the same problem.
  They have listed the battery as a genuine, and there any labelling even as my old battery.

  The battery would be false or toshiba has changed the specifications of this battery in particular.
  The reason for my last statement is the fact that my old battery contacts look more apparent than those on the new.

  I have no reason to believe that the company is not kosher because I returned the first battery to address personally after realizing that they were on my doorstep!
  Fake or not compatible?

  The comments appreciated.
  Thanks in advance!

  Hello

  Maybe you used the battery is not compatible, but AFAIK the PA3534U-1BRS is designed for Satellite A200 A300 L300 L300D
  So it should work.

  However, I recommend buying a battery of origin of Toshiba ASP.

  Contact a local Toshiba authorized service partner and order a new compatible battery for this laptop.

  I think the new battery should work.

• Satellite P100: Battery is only lasting 10 days after a full charge

  My P100 battery is only lasting 10 days after full charge and then not use it. Is this normal?

  Mike

  Hello

  Yes, it's nothing unusual. My Sat A30 loses the power of the battery for 3 days being off.

  Please consult this document:
  Battery drains 15-20% when it is turned off during the night
  http://support.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

  According to this document, that the battery could lose about 15-20% of the power during the night.

  Greetings

• How long is the Magic Trackpad 2 battery expected to last?

  My battery is only last about a week, sometimes less. And now I seem to lose my connection Bluetooth A LOT.  If I plug it works, but if I unplug the unit (even if it is 100% charged) I get problems Bluetooth again.

  It might be time for a Genius Bar, visit.  :-(

  Hello G5gyrl,

  I can't offer too much help because you're using Snow Leopard 10.6.3 according to your profile and the new trackpad 2 requires El Capitan 10.11.2.     There are also Bluetooth 4.2.

  If you are missing these two the new trackpad does not completely work.

• Battery will not charge. Connected but said no current charging.

  Original title: Bateria Energia

  Hi my battery does not charge, it has a mensage that says connected but no charging current. I just got the phone last week, and he came with this problem.

  Return it to the store you bought it from.
   
  
   
   

• Laptop battery does not load when it is plugged

  I plug in charger and battery will not charge upward. Bought the new charger and still does not. Labtop not one year. It's aspire one.

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  =================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• Battery indicator indicates "battery is not installed."

  Lenovo SL 510 10mos old. "Recently, the battery indicator indicates" battery is not installed. Occurs when you use the power supply mains or battery only. Have the batteries removed and replaced, but still the same message. Power Manager shows also the battery does not exist. Operation is OK on battery alone, but I have no idea about the State of charge of the battery, time remaining, etc.. Is there any solution for this? The update of the firmware released 08/09/2010 will solve the problem? Help please.

  Tried all three. Patrick first Bishop: no change driver Hotkey: no change. Last updated firmware. Message: firmware update not required. Rebooted and flag State is back on and functioning.

  Thanks for your help.

  DOGMAN43