battery not detected after flashing the BIOS

Similar Questions

• ProBook 470 G3: ProBook 470 G3 fan system after flashing the BIOS errors

  B has recently purchased a HP ProBook 470 G3 with i7 CPU. When I got the laptop I placed my own memory and M.2 SSD in and performed a clean installation of Windows 10 x 64. Everything was fine, I installed all the drivers and the laptop worked perfectly. However, when I flashed the new BIOS, V1.07 Rev A, I started to have problems.

  I use the laptop for academic purposes, I so open and close several times a day. After flashing the BIOS again, the laptop awake sometimes not, and trying to turn off it I had to remove the battery. Would not even holding down the power button for 20 seconds. While booting after removing the battery, I'd get a system error, 90 b error code fan.

  I tried re flashing version 1.07, but returned eventually to version 1.06. This version works very well. It was a real let up to me, given that this laptop costs €1400,- and should be a book reliable business.

  Is their another experiecing the same problems? If so, how do fix you it? And no one knows when they will be a stable version of BIOS V1.07?

  Use the PC Hardware diagnosis UEFI to restore the previous BIOS so that that you flashed cause questions.

  Press the power button and then immediately begin to press the F2 key to evoke the Diagnostics menu.

  Choose firmware management. In the menu next, choose and click on revert to the previous version.

  You can also create and use the 3-in-1 usb to accomplish the same.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html?JumpID=va_r602_us/en/any/PPS/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/DT

• Equium A300D - 16 c - battery not detected after replacement

  I have an Equium A300D - 16 c. The original battery was shot while I bought a stack of real PA3727-1brs 12. I have put in the laptop, it seems to load, but in the corner, he always says no battery not detected even if its load on. When I leave the charger it says remaining unknown.

  I tried the usual stuff to go into Device Manager and uninstall control compliant apci and still he has not solved it self. I've also updated my bios to the newest one. I just wanted to know what could I do so I can see how much battery is left, and if the laptop can recognize I..

  Hello

  Is this a battery Toshiba of origin of an authorized service provider?

  Usually, the new battery should be detected after the first start, I recommend that you charge the battery while the laptop is turned off. Start the laptop with battery only and check if she recognized properly s.

• Black screen, high regular of underscore on the left does not start after reflashing the BIOS F.38 on HP2000-363NR

  HP2000 363NR, recently tried flashing the BIOS F.38 (here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116227-1&cc=us&dlc=&lc=en&o... ) to solve a problem of overheating.

  Well, it was a mistake.

  Now it does not start at all.

  Fans spinning upwards. Hard disk rotates.

  By pressing ESC, F1, F2, F9, F10 and F11 at startup to give appropriate (fast!) messages but then go to the same place:

  Black screen with flashing underscore in the top left. Leave it to this screen has no effect.

  Never see no text except the quick messages in the lower left (or "Press the ESC key for the system menu" down left based on nothing).

  Out and the relocation of memory does not work. Boot with a DIMM module does not work. Now hold power for one minute while the battery and plug on does not work.

  Battery is fully charged.

  OS is Windows 7 64 bit Home Premium, came with the laptop.

  Is it possible to return this BIOS?

  -Me

  Thanks to Xraytim in the post below, short-circuit the battery CMOS me returned to the previous BIOS. Need to remove card system as a whole to achieve this * beep * connector, but 34 screws later (34 = some # between 15 and 50), BIOS is back, problem solved.

  Thanks for the forum!

  -Tim

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/DV9858ca-won-t-boot-after-BIOS-update-won-t-power-with-AC/TD-p/555547

• Laptop computer DV6174ea not start after upgrading the bios!

  HP dv6174ea lapop - Win XP media center edition with sp3 - processor intel core duo - 2 GB ram - 120 GB hd

  Ive just used the upgrade of bios of HP downloads flash to upgrade the Phoenix bios on my dv6174ea to version 2.9 1.06.Flashed successfully but on reboot it reaches windows XP start screen (black with logo) fails then a blue screen and restarts quickly. Same cycle occurs again and again. Ive tried to boot from the XP cd, but it gives the message "no hard drive not detected" and fails. detect the drives in the BIOS there is no options to the automobile.

  Curiously, a USB bbot containing paragon hard disk manager won't start and sees my drive (two partitions) and the system partition is active.

  I wonder if the flashing the BIOS changed settings or drive letters so that windows does not see properly. I wish there was just a simple option in the bios for detection of discs.

  Can someone pls help.

  If you want to start your computer from the xp cd, then enter the bios and it try to disable the sata mode and activate the ide mode and then try to format your drive... it should work... !!!

• T530 does not start after upgrading the bios to V2.65

  Hello..

  I flashed the Bios to V2.65 under Win 10 via Lenovo Systemupdate.

  After the restart I had set default Bios and save the changes.

  Start the laptop it hang in a window to select the boot device.

  When I press on my Samsung SSD EVO nothing happened.

  I'm trying to reinstall the Bios with boot-CD. Tool said: there is no need, organic cause is real.

  Downgrade to old Bios in possible (?) not...

  It please can someone tell how to fix this?

  It comes to my work machine, and this is a disaster!

  Thanks MajorM

  Hello..

  found the solution...

  > Disable menu security-> "secure starting".

  > Start menu: UEFI/Legacy Boot-> legacy set or both

  too long, I remember. I never had problems with the bios updates.

  but it was my last... never touch a running system

  See you soon...

  MajorM

• Bluetooth not available after upgrading the BIOS on HP g62-a60EM

  After upgrading the BIOS, I can't use bluetooth, as I can't see it in Device Manager. I've updated the BIOS with the file sp55430 on the support site. Battery is not holding a charge, it runs out after about 30 minutes. Back BONE back then now, I can use bluetooth. My OS is Windows 7 Professional 64 - bit - Slovenian.

  If anyone can help?

  Kind regards

  Dragan

  Hello

  Try to update the BIOS again. After that make sure that the wireless and Bluetooth lights is lit. Also download and installed the drivers of bluetooth and verification.

  After the BIOS also check in BIOS if Bluetooth is turned on:

  Menu of the System Configuration > Integrated device options > Enable/disable integrated Bluetooth Radio device
  

• Pavilion dv7-4270: Hp pavilion dv7-4270us hangs after flashing the bios

  After taking advice from the hp support helper, I downloaded and updated the drivers from the hp website. I left the bios flash to last after you restart the system. I started to windows 7 and everything worked well, then, I went on the hp support site to download the Bios flash and tools that came with it now. Following the steps exactly as they were on the Web site I went ahead and flashed the bios. Once the bios has been flashed, I was told to restart. After restarting the laptop crashing completely

• Satellite L650d-120 does not load after upgrading the BIOS 1.7

  After upgrading the Bios up to 1.70 my laptop is no charging current, but always works to the AC adapter.
  Can I do something on my own?

  Hello

  First of all, you should set the BIOS to default settings and need to save the changes.
  You must also leave the AC adapter plugged into the laptop for a longer period of time.

  Welcome them

• Windows 7 does not update after changing the BIOS battery

  I recently changed the BIOS battery for my desktop which runs on Windows 7. Even after that windows 7 is not able to update.

  Windows Update checks the updates forever!

  

  the action center has this message:

  

  and the history of the update is like that...

  

  I also tried the tool micrsoft 'Fix it '. It was of no use. Windows Update stopped for checking updates and gave the error: "80072f8f.

  Can someone please help to fix this error, this will also allow me to upgrade to Windows 10!

  Thank you.

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Full updates to reset Windows

• Qosmio G10-133 - battery not detected after upgrading to Windows 7

  Hello, I hope someone can help my frustrations here.

  In recent weeks, I successfully upgraded my laptop to Windows 7, an increase of memory to 2 GB, bought new power cord for laptop, new battery and resolved all the issues that Windows 7 has cast on me. The laptop and runs like one dream other than a question that seems to have had worse.

  The laptop no longer recognizes the new battery. (battery with a cross through it and a photo of current) For about a week after installing the battery, this has worked fine but now does not detect everything. I don't have any errors in Device Manager and windows recognized the ACPI etc battery inputs and has no problem. I also loaded the package of Toshiba value added that Windows 7 has found for me but still nothing. Battery not charge even though sometimes the battery works for about 30 seconds to start up if the battery is back removed and implemented, then stops again (once Windows loaded) I tried many things like the disabling of the driver, reinstall battery etc, but nothing. I tried the iniitally of battery with Windows XP and worked well.

  I have also searched the web and saw that many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS, but Toshiba have not released an upgrade from the original in 2004 (which is for WIn XP Media Center), and there is no settings in my BIOS for ACPI etc.

  In addition, I can not calibrate the battery because I can't do anything with it. I don't think it's a question though.

  If anyone has any ideas I would really appreciate it or all the links to the drivers etc.

  If this is sorted my laptop should last for 5 years!

  Thanks for reading this.

  Dickie

  Hello

  First of all, I doubt that many other laptops equipped with Windows 7 have this problem. I've never heard of this and normally charge the battery will not be controlled of the OS. It happens automatically and your battery will be charged if the AC/DC is plugged. If the OS doesn't affect it!

  To be honest, I also don t know why your battery isn't detected, but what happens if you turn off the laptop and let the AC/DC adapter plugged in for 24 hours? After that, it should be possible to work on the minute of the battery for 1 hour or more.

  If this isn't the case, it seems to be a hardware problem, maybe the battery doesn t work correctly and should be replaced. You should contact the retailer where you bought

  By the way: some nice and interesting tips on battery:
  http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

• Re: Blank screen on Satellite A200-1 body weight after flashing the Bios

  I have a Satellite A200-1 of body weight, and I flashed my Bios when the laptop froze.
  So I had to restart now, the screen does not light.

  Any help on what to do?
  Do I need a new toshiba Bios Chip?

  I have a Satellite A210 - 16G and I decided to the new version of BIOS (2, 00-WIN32) flash. I downloaded the new version, the decompressed files two (setup.exe and alaa200a.rom), quit all running programs and disconnected from the internet and launch the setup.exe.

  After a program window apperared and it starts automatically check my bios version (strange thing - cooler system started working with maximum RPM) and after 5-10 seconds, this window became blink and at the top, there was a message 'no response '.

  I thought that it is ok and I expect about 15 minutes for a result...
  But I suck. I closed the window and tried to restart, but suddenly I got a white screen.

  I disabled a camputer in now the power button / stop.
  And after that I can depend on to it - I press the power button, then a power led lights and that's all, blinking screen, no response.

• Battery not detected after Windows update

  Hello

  I own a HP Pavilion G series laptop and I have windows running on it 8.1. Windows just made me finish an update, after which it is not detecing my battery more. Initially, he says: "trendy but no charging current. That's why I shut down the computer, removed the battery and plugged in. Now, he said only: "no battery is detected.

  I should mention that I do not use the original supplied with the laptop battery. It's a long battery life that worked well until the update. Please note that I am not too good with computers.

  I appreciate any kind of help in this situation. In addition, please let me know if any other information is needed to help out me.

  Thank you

  Edit: Now, sound to pass the message between: "no battery is detected" and "trendy but no charging current.

  That of Emad,

  Welcome to the HP Forum.

  The updated patch is maybe not able to detect "non standard" battery you are using.

  You could try to use a Restore Point and affecting the system to a date before the update was installed.  In this way, the offending update will be deleted from your computer.

  Using Microsoft System Restore (Windows 8)

  Contrary to belief, you have a choice on the installation of the updates.   Windows cannot make you install updates on your computer.

  You can set Windows updates notification, so you can decide what updates are valid for your situation.  Many people choose this course as one that fits, even if it forces you to do a little more work.

  If you set the Windows updates to be notified

  • and you always create a Restore Point before you choose to install updates
  • and ONLY install you the important updates (never optional updates)
  • and you've read about the updates that you have any concerns at all
  • then, you may find that you have less long-term problems
  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8

  Click on the thumbs-up Kudos to say 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Battery not detected after upgrading Windows 10

  Improved my Aspire 5738 of Win 7 to 10 to win. After upgrade, no battery is detected by the laptop. I like to win 10, but if no solution is found, I'll neeed to roll back to Win 7 fast enough, or I'll be stuck with a laptop that is always running in an office environment.

  I tried the old standbys (unplugging everything, release the power button, then restart, then adding back battery), but does not work. Someone at - it any other ideas / suggestions /directions?

  Thank you!

  Please check if you can make a battery driver reset. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. +++ If I have been helpful, a KUDOS is to enjoy and don't forget to mark "Accept it as the Solution", the post that solved your problem. Thank you.

• Inspiron 1525 does not detect HD in the Bios

  Hello everyone, I'm new to this so if I do something wrong with this announcement, please accept my apologies!

  My main question is this, I was given an inspiron 1525 in soft state by a friend who was ready to crush the frustration. Now I begin to understand why. It will not detect ANY hard disk, I put in. Of which I know is very well because I took it from my old laptop when I upgraded to a 500 HD concert. I tried a brand new WD 320gig, an another WD 500gig and supplied with this machine and no dice. I tried to change the bios to ata ahci and all sorts of things, & I can't get the bios to read or detect a hard drive.  ANY HELP at ALL will be greatly appreciated. !!!!

  If this is the wrong place to ask a question, please excuse my ignorance, I'm just opperating on overload right now & very frustrated. Thank you. Jon.

  Hi guys, I'm having the same problem, after I ruined 2 hard drives because I thought it not linked not properly (after my parents let him down once or twice), I leaned slightly above the hard drive (near the touchpad)... The 3rd hard drive didn't settle... I googled a lot and I was thinking, what happens if I change BIOS, ATA AHCI after changing the setting, leave the bios and re - enter the bios and changed from AHCI to ATA, now windows could be installed without any problem. Is not the solution, the problem I have now is that everytime I turn on the PC I have to do this thing, otherwise the hard drive is not detected.

  I have idea why this is happening? I updated the bios to a17 (I think) and still the same...

  any other idea is very appreciated!

  Thank you