Battery packs cables and Anker

Similar Questions

• Battery charger, cable, iPhone problem 6

  Hi guys, I'll go directly to the topic: this is my case
  I got the iPhone 6 for about 1 year and a half, my departure from cable elbow off and leaving bend I later he broke the rubber cap and exposed the cable, I have always used this cable for a few months and yesterday I noticed that I can not charge my phone more (the percentage goes to the top but very slow (, as 2% for 30 min)
  I downloaded an app and his told me that my dough have 65% wear...
  I have replace the old cable with the new Anker Powerline + cable. and the problem still exists...
  So: My battery and charger so must replacement? and wrong accessories can cause the battery problem?
  p/s: sorry for my bad English.

  Thank you!

  Your phone is almost two years of use, it is generally acceptable to lithium-ion batteries deteriorate after a number of charges, I would like to replace. It costs $79 for out of warranty: iPhone battery & Power - official Apple Support

• iPhone 5 loads some cables and not with others

  My iPhone 5 stopped to load with the original cable so I started using others and have had mixed results. It will load with an iPod Touch 5 g and an Anker 6' cable. It does not load with its original cable, an iPad 2 Air cable or Anker 1' cable. A technician has replaced the battery on my iPhone 5 and during his first visit, his cable did not work and on his second visit, it worked (even cable). With all the cables that do not work, I get the message "this cable or accessory is not certified and may not work reliably with this iPhone."

  Hello, SalinasEd!

  Thank you for joining the communities Support from Apple! I know how important it is that the iPhone is charging correctly with the cables. Looks like you; ve tried a few strides in using different Chargers so far. Take a look at this article here on If your iPhone, iPad or iPod touch will not charge.

  If your device doesn't load or loads slowly

  If you have a very low battery and plug in the power, a black screen or a black screen with a red battery may appear for a few minutes. Follow these steps and try again after each:

  1. Check your charge cable and USB adapter for any signs of deterioration, * as broken or bent pins. Do not use damaged accessories.
     
  2. Use a power outlet wall and check for connections between your cable, USB adapter and outlet or try another outlet closed.
  3. Remove all debris from the charge on the bottom of your device socket, then firmly plug your cable to charge your device. If the port of loading is damaged, your device probably need service.
     
  4. Leave your unit in charge for half an hour (if your device does not respond then Learn how to do).
  5. Force restart your device: press and hold the sleep/wake and home buttons at the same time for at least 10 seconds, until you see the Apple logo. So let your device for another half hour rate.
  6. If your device will not turn on or charge, grab your camera, the charging cable and charge adapter for an Apple Store or Apple authorized service provider for assessment. You can also contact the Apple Support.

  * If you are not sure if an accessory is damaged, take it to an Apple Store or the provider of services authorized Apple for evaluation or Contact the Apple Support.

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  If you are not able to solve the problem with these steps, it might be better to contact Apple directly by clicking on Contact the Apple Support to find the best way to solve the problem.

  See you soon!

• How to use the headphones cable and load on iphone 7?

  I am very interested in th new IPhone but I'm not clear on how couldn't I maintain the main use that I have now with it.

  In many cases, I use my headset while I load the Iphone:

  -audio conversation at the end of the day when the battery is low and he needs to reload

  -When chat or listen to music while using my phone as a modem, with usb cable (otherwise as this function drains the battery quickly impossible)

  Also, I tried to use a Bluetooth headset but frankly I prefer questions from the cable to the battery ones (always unloaded when you have an important conference call) and the sound quality not so good

  So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ? It's the only solution I see, even if painful compared to the current iPhone (risk of losing the adapter, may not be comfortable in a Pocket / may damage the Iphone port...)

  Ulysse311 wrote:

  .. So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ?...

  Hello

  It is a community of support based on the user.

  If you wish to submit comments or suggestions to Apple, you can do it here:

  https://www.Apple.com/feedback/iPhone.html

• I have a problem loading with my iPad Air2.  I used other cables and Chargers but still doesn't load.  I plugged the iPad to iTunes and a DFU after he took a few hours that the iPad has been completely restored and apps reloaded.  In addition to the

  My iPad will not normally charge.  I tried different cables and Chargers.  I plugged the iPad to iTunes and reset a DFU.  After only a few hours the iPad finished reloading all software and reloaded new apps, it had also charged the battery but the problem remains, I still can't load the iPad normally.  Any help out there?

  There are very few things that keep loading an iPad. Some of these (other charger plugged into a good outlet, different cable) you have already tried. Others are:

  1 dirt, lint or fuzz in the port of loading of the charger or the iPad. Check and clean carefully if necessary.

  2. a software failure. Reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

  3. failure. Make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• Screen displays a logo of cable and lightning iTunes trying to charge iPad 4

  4 iPad has a black screen for months, and I was ready to trash. Just connected to try to charge the battery completely died and my screen turned on and now shows

  an image of the cable lightning pointing to an iTunes logo in the center of the screen.  What it means is to accept a charge?

  He asked to be connected to a computer running iTunes

• On the Battery Pack high capacity

  Hello

  I think to make a battery that will last more than a long time/year extra one. I saw the
  "Battery pack (Li-ion, 12 Cellen, 8600mAh) high-capacity".
  but there is no mention of working time... I have a 1, 6 GHz centrino and a 15' display (satellite A80-115), how long this battery last in optimal conditions?

  Thank you!

  Hello

  It's very strange to say, how long your unit can work with battery power.
  For example: If you watch DVDs or play games, so you can use your laptop about 1.5 to 2 hours. On the other site to normal use with say MS Office applications, it is possible to use the machine more than 3 hours. The battery power is therefore highly variable.

  Good bye

• Satellite Pro A10: What battery is compatible and where can I buy it?

  I almost always have my laptop plugged, but on the rare occasions I use the battery that it only lasts a few minutes. I guess I just need a new battery and the battery model number is PA3284U-1BRS, but I can't find that is available to buy. Can I put a hand on her at all on this site or is there a compatible template I should use?

  Thank you.

  Hello

  I found the information that these batteries are compatible on your laptop:
  2nd Battery Pack Slim SelectBay (Li - ion, 6 cell, 3600mAh) PA3155U-1BRL
  Battery (Li - ion, 6 cell, 3600mAh) PA3284U-1BRS
  (Li - ion, 6 cell, 4400mAh) battery PA3285U-1BRS
  Battery 6 cells, 4400mAh PA3285U 3BRS

  I have used the page Options & accessories for research:
  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/JSP/OPTIONSANDACCESSORIESHOME.DO?SERVICE=EU&ID=ONLINE _ SHOP

  All parts of this you can buy form the Toshiba service partner in your country.

• Satellite A100-237: what are the compatible battery packs

  Hi guys

  There is no compatible batteries listed under the 'available options' tab for the A100-237, which I find hard to believe.

  No one knows the number of part/model of the standard battery, the extended battery pack and battery high capacity?
  My battery is completely dead and I need a replacement.

  Thank you!

  Hello

  I couldn't t believe that and that's why I ve checked the Toshiba Options European and accessories site.
  It of a nice page if you need any information on compatible parts and additional devices.

  However, I found this battery support.
  Battery Pack (6 cells, 4300mAh) PA3399U-1BRS
  Battery (Li-ion, 4000mAh, 6 cells) PA3465U-1BRS
  Battery (Li-ion, 4300mAh, 8 cells) PA3457U-1BRS
  Extended capacity battery (Li-ion, 6000mAh, 9 cells) PA3478U-1BRS
  Battery Pack (Li-ion, 12 cells, 8600mAh) high-capacity

  As you can see there are different farms with different power capacities.
  If you are going to buy a large capacity battery, you should be able to use the laptop much more time with the power of the battery!

• What battery pack comes with Satellite L300 - 17 M?

  Good evening.

  I plan to buy the * Toshiba Satellite L300 - 17 M *.
  Model number: * PSLB0E-06R011G3 *.
  Product page link: [http://eu.computers.toshiba-europe.com/innovation/product/Satellite-L300-17M/1055471]
  Link to the user manual of the product: [http://support1.toshiba-tro.de/tedd-files2/0/userman-en-20080417102004.zip]

  That is, that I could not find any information indicating what battery is supplied in the box with this model,
  i.e. 3 cells / 4-cell / 6-cell and its associated specifications.

  I * + a + * however, able to find what battery packs that are compatible with this model are available as a separate purchase option.

  Any help on this would be greatly appreciated.

  Best regards

  Samuel.

  Hello

  According to the specifications of the laptop on several pages, I found that this laptop comes with a battery 6 cells. I'm sure you can also clarify this with your local dealer too.
  I hope he will confirm my information.

• Updated my iPhone6 to ios10 and now my battery heats up and does not load

  Updated my iPhone6 to ios10 and now my battery heats up and does not load

  I have never experienced this with another iPhone or iOS version

  Of course, it's a problem because I use my phone all day

  What troubleshooting steps have been taken so far?

  Have you completed a reboot, reset or restore such as recommended by Apple?

  Best,

  GDG

• IOS 10 makes your iphone 6 more battery drain faster and feel hot

  iOS 10 makes my iPhone 6 more battery drain faster and feel hot. Even charge my phone because my phone warm. I charged my phone three times per day.
  It is the case for all the iPhone 6 as well as holders with iOS10?

  Every since going to iOS10, my 6 s more drains much faster - even after doing a factory reset.

  I used to get 7 to 10 hours before hitting 40% when the iOS9

  

• How to remove the front rear of the Tecra S1 PT831A to check cable and power?

  Hello

  I need to "check the cables and power," following the Seatools for test back and start-up message 'failure to support, check cable PXE - E61'. I also have a message for the CHKDSK using the XP Pro CD, saying after 26% that "the volumn appears to contain one or more unrecoverable problems".

  Remove all screws B6 or what else - to remove the back cover for "check cable"?

  Startup by default, without failure, then to BSOD Mode screen whatever the choice is taken, the BSOD is too short a period to read the message, and there is no option in the choice of Safe Mode to disable "Restart in case of failure".

  I removed and reinserted the RAM and HARD drive without change to issue.

  Hope this makes sense and someone can give advice.

  Concerning

  Wagga

  Hello

  Each laptop has in the list of all bootable devices BIOS. If none of them can be used the last of them, LAN port, is checked, and then you'll see this message PXE - E61.
  If the problem may be your HARD drive.

  First check HARD drive. Enter the BIOS and set it to default settings. Restart the laptop and check if the HARD drive is recognized and registered properly in the BIOS settings. If so he has no problem with connectors.

  I recommend get you the new HARD drive for testing purposes. Put the new HARD drive and try to install the OS by using the original Toshiba recovery disc.
  Please post comments.

• Tecra M10 - CMOS battery is low and powers down and upwards automatically

  Toshiba TECRA M10 - 10W
  Model no PTMB1E-00P003EN

  This laptop was working fine last week and is only about 1 year.

  Now to the power he reports the CMOS battery is weak and penetrates into the configuration screen to set the date and time.

  Once this is done, it shuts down and no more automatically, but everything works the CPU fan to high speed, no attempt to start etc.

  If you press the power button with the fan running, it will be power downwards and upwards (while it is still connected to the power grid) and again to report a problem with the CMOS battery.

  Any ideas on what is wrong and what can be done to fix this?

  Hello

  First the CMOS battery can be charged while you let the connected AC/DC adapter, for example 24 hours a day. After that, the message CMOS battery shouldn't t appears more.
  Check this box!

  The power automatically power cycle on and off can represent a danger due to a hardware malfunction can you start in Windows or in fact that happen before?
  Maybe it s overheating and you need to clean the laptop using a jet of compressed air.

• Battery is dead and the Satellite C660-15r not turn on or charge

  I have a PC laptop toshiba Satellite C660-15r I've had for a year.
  For these last days, I had to move the charger a little when I insert it into the laptop so he could load.

  Now the battery is dead and the laptop will not turn on or charge.
  It's not happened before and there is no other problems with the laptop.

  Have you tried to contact the nearest Toshiba service provider and ask for help first?
  I mean the guarantee must be valid in order to see whether they can help somehow.

  Please clarify this and send feedback.

  BTW: workbook correctly on the current doesn't provide not only (removed battery)?