BattleForge not cursor

Similar Questions

• Portable Envy 17 F7T68EA #ABU: Touchpad does not / not cursor

  I have recently purchased this laptop to replace my very old desktop computer and am still meet with her and W8.1 o/s.  Just tried to connect a keyboard and wireless mouse (classic HP Wireless Desktop game) and lost the cursor and all the functions on the touchpad. The wireless keyboard/mouse don't show any children successful login message, and no error message. The mouse worked briefly and jerkily with a delay of 5 seconds, the keyboard did not work at all. The only way I could figure to close the machine that I couldn't in the settings menu without the touchpad works was to hold down the power button until the light went.

  Have you tried a wired mouse, but while the laptop acknowledges that it is plugged in (it beeps at me), which does not work either. Have also tried a "hard re - set" i.e. Remove sector and battery and hold the power for 30 seconds, but nothing helped.

  Any other suggestions welcome!

  Thank you very much.

  Hey @Womblemeister,

  If you click on the Windows key or flag of the keyboard and just start typing the properties of the mouse, it will show you a screen to restore the default values. If you just keep the tab you will come to this tab.

  If it does really not just plug a USB mouse to restore the settings.

  Thank you.

• Firefox not displaying not cursor site properly but works in other browsers

  I am creating a Web site and the cursor image is visible on the side of the site. I use firefox 20. It works fine on other browsers and other peoples firefox, but for some reason any, it appears properly on my own. This is the website of test http://greatgreendeals.co.uk/exmoorsafari/. I have a screenshot, but I don't see how to download here

  The #megaMenu is launched to the left, so he pushes div.featuredposts right. Try adding clear: left to div.featuredposts so that it wraps down beyond the float.

• Position of cursor/Cycle not full resolution

  A bit new to Logic Pro X. I'm bouncing titles using cycle to set the beginning and the end. I would like to point out the exact position of the start and end of the cycle bar so I can go back to a previous position if you wish. In full zoom I can move either end bar back some distance without changing the value of the Position display. The resolution I want is not indicated in the help tag, nor measures define the points of beginning and end displayed in the dialog bounce also precisely I want either. I realize these are microscopic changes, but still...

  Maybe using SMPTE points offers the best resolution. At one point, I was able to see a pop up to the SMPTE standard, but cannot find a way to get that back.

  Thus,.

  1. What is the best way to note cursor high resolution and post cycle?

  2. How can I display SMPTE point info?

  Thank you!

  Logic has a primary rule and a sovereign school.

  The primary ruler is set with the option 'Use Musical Grid'. If enabled, displays the primary sovereign bar. beat (on time) and if disabled, the primary ruler displays SMPT (absolute time)

  The secondary rule the other displays of everything that is on the primary sovereign.

  You can view the secondary rule in the area of the track (or other editor windows) by turning in their View Local Menu.

  

  In order to see the small increments, just zoom in as much as you need and set Snap to "Smart".

  BTW, once you set the range bounce (Cycle, region, project) and open the Bounce window, you can change the range in the beginning and end of the Bounce window field.

  

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• the development of the cursor

  Hello
  
  I have 3 fields in a form.
  
  1 last_name
  2. first name
  3 phone #.
  
  last_name and first_name is necessary.
  
  If the user enters a name or first name I have a process that gives a message saying "Value is required" when they hit the button Save.
  
  It is, if only first name is NULL, the message which is fine, but the focus of the cursor goes to the first element that is last_name.
  
  How can I change the focus of the cursor so that it goes to the element that is missing the info. In forms 6i there used go_item (...), is there something like that in APEX?
  
  Thank you
  Laba

  Fact!

  Look in the header "HTML" from the definition of the page and the "attribute HTML Body". I also changed the focus of the cursor in "display attributes" to not focus not cursor.

  You can undo my changes in just clear these fields down and the development of the rear slider.

  Hope this has helped.

  See you soon

  Ben

• I wish the arrow keys to scroll the entire page. Now, they behave like Notepad.

  Arrow keys are laminated reading BBC news articles - content article jump large bays below and scrolling not as they did before. They are brain dead like MS Norepad. That's happened? In all honesty, I must tell you my cat stepped on my keyboard... possible cause, making sort of a control code?
  Help, is it you please thank you, tick

  problems of Caret caret (F7), most of the keyboards painted keys, make sure that NUMLOCK is turned off as long as that can also interfere. 'PgUp', 'PgDn', 'Space', 'Home' and 'End' keys' works not - cursor caret F7

  • https://support.Mozilla.com/en-us/questions/845663

• Home field after the validation error

  Using Application Express 4.2.5.00.08

  I created a validation for each required to shoot the submit button field. If a field is NULL, the error message 'field is required' online is displayed.

  If an error occurred, is there a way to put the cursor in the field associated with the error? Currently, it returns the first field at the top of the page.

  Thank you very much

  

  Hi HRSysAdmin,

  Your answer is already given by fac586 in the very next post the question. Although there are a few minor changes to the solution.

  fac586 wrote:

  HRSysAdmin wrote:

  Using Application Express 4.2.5.00.08

  I created a validation for each required to shoot the submit button field. If a field is NULL, the error message 'field is required' online is displayed.

  If an error occurred, is there a way to put the cursor in the field associated with the error? Currently, it returns the first field at the top of the page.

  Do the a Page Load Set Focus dynamic action with Selection of Type jQuery Selector and jQuery Selector defined value on :input.apex-page-item-error:first .

  Here are the changes made to the fac586 solution:

  • Go to the Page attributes-> display attributes-> Set Cursor Focus not cursor focus

  

  Why is it necessary? As it is set by default to the first point of page bothers our dynamic action set out below and, making it useless.

  • Here is the dynamic action proposed by fac586

  

  Here, the change is jQuery Selector is passed to input.apex - page-point-error: first to .apex-page-point-error: first as the prior takes the elements of entry into consideration, what happens if the first element on which the error occurred is a textarea or select list. For more information, see jQuery selectors.

  jQuery is a powerful javascript library when it comes to complex interactions between the user interface. You should save some time to learn the basics.

  Not to mention that the solution of Reema is not relevant because it proposes to transfer validation logic in javascript.

  I hope this helps!

  Kind regards

  Kiran

• Degraded LR6 has no temp slider

  I used gradients in LR5 for awhile... upgraded to LR6CC and the tool doesn't seem like it does in one of the tutorials... the WB cursors are not cursors (temp/tint) also the presence! Here's what I see...

  

  This image probably haven't his Version of process (in the Calibration section of the camera) for 2012. Different Wpv show different types of cursors.

  HAL

• RowId question!

  Assume that Sql like this;
  

      Select mv.RowId, mv.field1 , mv.field2, ot.field1 , ot.field2
       from table1 mv  join 
              table2 ot on ( mv.pkField = ot.otherField )

  Let's say the sql above is (for c in... loop) can we use the c.RowId to update the table mv?
  

      Update table1 
           set ....
      where table1.RowId = c.RowId;

  Can we trust on this rowId? I mean, what this rowId is not related to the sqlCursor resulting SQL instead of rowId from table1?
  
  Thank you;
  
  Marcos Ortega
  Brazil

  Hello

  >
  Can we trust on this rowId? I mean, what this rowId is not related to the sqlCursor resulting SQL instead of rowId from table1?
  >
  the rowid is an "internal key" used by Oracle to precisely locate a record. from that:
  Yes, it's reliable information.
  The ROWID belongs to the archives, not cursors.
  Never store the rowid yourself (ex: declare it as a column of rowid data type) just because it's a pointer and only because if "sharp" movements Records (ex you put the table in an another tablsepace) then your pointer become useless...
  to update this record, I would use the "for update" and "WHERE CURRENT OF syntax.
  Here is an example:

  DECLARE
     my_emp_id NUMBER(6);
     my_job_id VARCHAR2(10);
     my_sal    NUMBER(8,2);
     CURSOR c1 IS SELECT employee_id, job_id, salary FROM employees FOR UPDATE;
  BEGIN
     OPEN c1;
     LOOP
        FETCH c1 INTO my_emp_id, my_job_id, my_sal;
        IF my_job_id = 'SA_REP' THEN
          UPDATE employees SET salary = salary * 1.02 WHERE CURRENT OF c1;
        END IF;
        EXIT WHEN c1%NOTFOUND;
     END LOOP;
  END;
  /
  

  Check this box:
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14261/sqloperations.htm

• case - the mouse position statement

  I have a slider on my navigation bar that rolls with the mouse; movies play perpendicular to it as I scroll. If I click on the movie, I link to another page (easy enough). The real slider, however, isn't anything in addition to beautiful appearance. I know that if I do not have the children test this thing, I'll catch grief on this subject. So I tried to put a switch that connects outside according to the range of values is < 0 & & y > 125.
  
  As it is, I don't get any errors, it will just always by default. I'm missing something. I could always try a gia-normous 'if' statement, but I thought I'd give the switch to try.
  
  Thanks in advance

  OK, now I understand what you mean... :)

  First of all, I only gave a general example (in my second comment): when I say "enterprise value", the value isn't actually a word that you write... you just enter the value...

  Ex:
  var myDog:String = "Fido";
  {Switch (mydog)}
  'something' case study:
  trace ("odd name");
  break;
  case 'Fido ':
  trace ("had");
  break;
  by default:
  trace ("his name is Fido... You should know that... ») ;
  }

  You can also use numbers...

  So, in your example, you really need a range, so a switch would really work (there are too many values to search for).

  For example, your code might look like:
  mc_background.addEventListener (MouseEvent.CLICK, SliderSelect);

  function SliderSelect(e:MouseEvent):void {}
  If (e.target.mouseY > 0 & e.target.mouseY)<125)>
  var Button1Link:URLRequest = new URLRequest (" http://www.gtwebconcepts.com");
  navigateToURL (Button1Link, "_etre");
  }
  ElseIf (e.target.mouseY > 125 & e.target.mouseY)<>
  code to the second link here...
  }
  Another elseif?...
  else {}
  var homeLink:URLRequest = new URLRequest (" http://www.yahoo.com");
  navigateToURL (homeLink, "_etre");
  }
  }

  It would have been shorter for a switch with a beach... but there is no... We have to admit that you do not (cursor) in the traditional way is... ;)

• Query - uppdate

  Table A
  --------------
  emp_id emp_addr
  1 null
  2 null
  3 null
  
  
  
  
  Table B
  ------------------
  
  emp_id emp_addr
  1 x
  2 y
  3 z
  
  
  
  Can I update A.empaddr of Table with the values of the TableB.empaddre on a.emp_id = b.emp_id?
  
  This can be achieved with an update statement and not cursors?
  
  Thank you.

  Hello

  Of course, you can use an UPDATE statement:

  UPDATE  table_a          a
  SET     emp_addr = (
                 SELECT  emp_addr
                 FROM     table_b
                 WHERE     emp_id     = a.emp_id
               )
  ;
  

  I hope that answers your question.
  If this isn't the case, after a small sample (CREATE TABLE and INSERT statements) data for two tables, as they existed before the UPDATE and also post what you want to see in table_a after the UPDATE.

• Problem with onload javascript in the page of the apex

  I want to run some javascript by their SUMMIT when the user loads the page, but I can't get the onload function to work. I'm new to javascript, so it's probably a simple error on my part.
  
  All I want to do is to change the background color of a field (P5_GRPT) based on the value of another field (P5_MIN_DAYS). I just want something basic that works so I can build on that and make it more elegant/generic, but at the present time, the script below seems to have no effect. Any help would be appreciated. I put the focus of cursor attribute to ' don't focus not cursor ' (Apex version 3.01.00.12)
  
  Header html page:

  <script type="text/javascript">
  Function trafficlight()
  {
  c = document.getElementById("P5_MIN_DAYS").value;
  switch(c)
  {
  case 1:
  $x("P5_GRPT").style.backgroundColor = "green";break;
  case 2:
  $x("P5_GRPT").style.backgroundColor = "yellow";break;
  default:
  $x("P5_GRPT").style.backgroundColor = "red";break;
  }
  }
  </script>

  The body of the html page:

  onload="trafficlight();"

  Hello

  I think that the value of your item is interpreted as a string, not as a number.

  Try this:

  function trafficlight() {
    c = parseInt(document.getElementById("P5_MIN_DAYS").value);
  
    switch(c) {
      case 1:
        $x("P5_GRPT").style.backgroundColor = "green";break;
      case 2:
        $x("P5_GRPT").style.backgroundColor = "yellow";break;
      default:
        $x("P5_GRPT").style.backgroundColor = "red";break;
    }
  }
  

  Hope this helps,
  Dirk

• Development of the conditional field

  Hello
  
  I have a page with two fields. If the value of the field 1 is zero, I want the focus to be on the field 1. If the value of the field 1 is not null, I want the focus to be on the field 2. I tried this:
  

  <script language="JavaScript">
  if $v('P1_FIELD1') != ''  then
    document.getElementById("P1_FIELD2").focus();
  end if;
  </script>

  and using various iterations of said $v, $x, etc. but I can't make it work and I get an error:
  
  EXPECTED ' (')
  
  Page cursor focus is set on not focus not cursor.

  Hello

  Try

  BR, Jari

• How to get the focus and the slider to textfield when the Application loading

  Hello
  In my application, I need the focus and the cursor on a control textInput that soon the application is loaded.
  The Focus can be set by textInputname.setFocus () in the full demand creation event. It works but
  the cursor do not appear there until what the user clicks anywhere in the area of application. Y does it have no way set cursor on
  the textfield on request load so that if the user enter something without clicking, on request, the text should go to this
  TextField.
  I tried the following things, but it do not cursor to textInput, only the focus is set with this,
  textInputname.setFocus ();
  CursorManager.setFocus ("textInputname");
  
  If anyone knows the solution please answer...
  Thank you...
  
  

  ' v Jay"wrote in message
  News:g6ume8$b8e$1@forums. Macromedia.com...
  > Hi,.
  > This logic to set the cursor to the load of the application with callLater do not work...
  > Do you have another idea

  The problem is that the reader Flash itself has not the focus. I think so
  There are hacks JavaScript that you can use to try to correct this, but I have no
  believe that they are reliable.

  HTH;

  Amy

• onLoad - javascript - where should I include the code?

  Hi, have searched the forum and found that the pleace to include onLoad call should be included in the HTML Body section but when I try to apply changes I get the error message:
  
  1 error has occurred
  
  * You cannot set declaratively developing the slider if you specify an ONLOAD in this attribute. You can set update of the slider programmatically by using the following syntax:
  
  OnLoad = "mystuff (); first_field(); »
  
  My appeal is:
  
  OnLoad = "Alert ('test')"; "
  
  Thank you

  Hello

  Take a look at the Page change the attributes of your page. Now there is a focus of the cursor control - make sure it is set to "do not cursor focus. You can only have one for the body tag onload, so you can't have your javascript and this set to "first item on the page.

  Andy