be prompted to install the scsi controller during the creation of the new office or after recompose

Similar Questions

• Impossible to install the new Tempro V2.2

  You are prompted to install the new version of Tempro (V2.2). Installation is finished and asked to view and accept the privacy policy. MsDos screen appears with Temprolauncher.exe. Then I went to accept privacy policy screen again.

  Is there a solution to this problem?

  Hi tonymc01,

  Did you remove the old version of Tempro before installing a new? If this isn't the case, you should do it. Take a look in Control Panel > software to remove the old version first. Then, restart the computer and install the new version.

  Check this box!

• You are prompted to install the security update even if the update is already installed

  I use a laptop which has downgraded from Vista Home to Windowx XP Pro w / SP2 (although maybe it's not relevant). Issues installing security updates through Windows Update before today have never known. I am prompted to install the update from a security XP KB956744, what I have done. I installed it through Windows Update and automatic command prompt directly. I even posted the update as something to ignore, but I am always prompted to install it. I also tried to uninstall the version on my machine, and then reinstall the update, but I am always prompted to install it.

  Two questions:
  1. because I received a prompt saying that it has been successfully installed and it appears in Add/Remove Programs, I can safely assume that it has been installed successfully even if I continue to prompt to install it?
  2. If my previous question is true, how can I window update to ignore this update even if I have already reported as such by the normal means?

  Thank you.

  Hello

  Go to add or remove programs and look for the KB956744-security update and remove it.

  Download the stand-alone package of KB956744-security update

  For XP 32 bit:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=d1f82d76-eeb2-4FF4-9d2c-46882f214719&displaylang=en

  For XP 64-bit:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5061615f-FA8F-465F-ac8f-393998b7e91b&displaylang=en

  Restart the computer and boot into safe mode by pressing F8 during the restart, and then press and selecxt safe mode.

  Install the downloaded file update in safe mode.

  All the best!

• After opening closed, be prompted to install the update.

  After opening closed, be prompted to install the update.  Accepted the request of updates install, still continue to receive demand updates install on each request to stop.

  Hi DTIRDT,
   
  Thanks for posting on the Microsoft Forums.
   
  First, I suggest to install all updates manually by running the Windows updates and check if all updates are installed.
  Once installed try turn off the computer and check if you are always faced with the question, if so post back so that we can help you further.
   
  It is best to install the updates when the computer is running.
   
  I hope this helps.
   
  Best regards, Niranjan | Microsoft Answers Support Engineer

• Before you install the new version without CS2 activation, during uninstall old Photoshop, should I ke

  Before installing the new version without CS2 activation, during uninstall of the old Photoshop, should I keep or delete preferences and should I use standard uninstall or advanced?

  You are welcome to keep your preferences.  They will be used when you reinstall Photoshop CS2.

• Installed the new HD - cannot set up (XPS 400)

  Hello and congratulations in advance for anyone who can help me with this!

  Recently, my Dell XPS 400 crashed and would no longer boot (it worked, but it wouldn't boot because of damage to the discs dual-core).  I decided to buy a new HD to replace the old thinking that would solve my problem... not so much.  So here's what I've done and the question:

  (1) I took out a secondary drive, replaced by my OLD main drive

  (2) I installed the NEW drive into the slot where my OLD main drive used to reside

  (3) for the reset, I reached a display using the key CTRL-I command that told me that I now had a disc in which I could use to 'mirror' of the old drive, which is now bootable.  Of course, I followed the instructions to do this in order to get my computer started.

  (4) while the process worked, it seems that my NEW drive disappeared completely and I have not reached my goal to replace my old hard drive AND my computer, it starts now, always gives me error messages and does not occur at the height.

  Can someone help with this problem who is familiar with what I'm on everything?  I would be eternally grateful!

  Theoretically, I want to do is to completely replace the hard drive with my new drive, use the old BACKUP disk as the new secondary drive and plug the OLD external drive for me to remove files that I need them.  A small crease is that I do not have the Windows XP disks for the software that came with my old computer and I am unable to get them, however, I don't have the disks copied on a separate disk, which seemed to work for the resettlement, but I'm not sure of whether or not it would work on a hard drive completely blank.

  In any case, could someone provide any help would be greatly appreciated!

  Linux has to read your old files very well.  It is not the OS, you need to worry, but instead, the applications you want to use.  For example, you were using different Microsoft Office to create data files, you would find that in order to make the use of these old files, you need something that is compatible with Microsoft Office to read or modify.  Fortunately, there are applications that can do it.  Open Office is one of them, and I'm fairly certain that they have a version that runs on Linux.  The only thing you will not be able to do it is using Microsoft Office because it will not install on Linux.  You will encounter similar problems with each type of file that you created.  In most cases, you will be able to find compatible substitutes for original programs, but there are exceptions.

  EDIT: I have to say that I forgot to mention that I'm talking about Windows XP in the paragraphs above with regard to service packs.  If you use Vista or later, the Council does not apply.

  I have heard many good things about the different themes of Linux, but like anything else, I'm sure he has his own set of problems.  Most people seem to not run into them very often, and many just love it because it helps to avoid many problems presented by Windows.

  If you really want to go back to Windows, and people of Dell cannot accommodate you at a price you will find reasonable, you could try e - Bay or similar online store.  It is my understanding that a lot of people sell their old floppy disks to install OEM Dell through this kind of output.  You need an installation CD of Windows from Dell that incorporates at least Service Pack 2, and Service Pack 3 would be nice.  The old installation diskettes don't work well on many computers produced since 2005 because of the change of PCI - e for the video.  Older drives simply do not have the drivers for the PCI-e bus.  If your computer is old enough to use AGP or earlier, it is not so much a problem.

  The computer is always looking for your old disks because the BIOS setting told him to do.  When you delete a record permanently, you should return to the controller settings in the system setup (F2 during the automatic test after a start screen) and stop the ports having no disc attached.  This allows the BIOS to know to ignore these ports.

  EDIT: I have to say that I forgot to mention that I wrote about Windows XP in the present paper dealing with service packs.  Floppy disks to install Windows occurs more early than those with Service Pack 2 have no drivers for video PCI-e which is used on most computers since 2005.  You don't need to worry about this problem for Vista or later version.

• 8500 a909n all-in-one: could not find a way to install the HP Solution Center after upgrade to win 10

  Grateful for help in finding a way to install the HP Solution Center after upgrade win10.  The installation CD original will not auto-run and when seteup.exe forced to run from the DVD, offers 'output' as the only item on the menu.  The HP support web site offers only the "HP Print and Scan Doctor for Windows" I have installed and tried to run several times.  Pretty frustrating.  Prints OK from normal applications, but am really struggling to analyze.  Any help appreciated.

  I have a 8610 who worked during the first weeks perfectly under windows 8.1.

  After the Win 10 update, it does not work.  The installer who "sees" the printer on the wireless network, impossible to install drivers or programs.

  Hate to say it, but I think we're out of luck until HP fixed their software.

  Very ironic because they don't have that tell of these printers are compatible with Windows 10 messages.  Technically, that's true; It is their software that isn't.

• Problems with installing the new version of hp support assistant-sp54373

  I have a Compaq Presario CQ60-202US running Windows 7 Home Premium 32 bit.  A regular HP support assistant began

  and have downloaded the new version of HP support assistant (sp54373) and after installing the new version and rebooted the software he gave me a ' year error occurred "and the HP support assistant stopped working!

  I then tried to uninstalled HP adj. and got an error during the deletion process, so I couldn't finish the deletion process, so I did a system restore to a good configuration, so the older version of HP Asst. (ver. 6.0.5.4) can be used until I can get this fixed a problem.

  If someone had the same problem and someone has suggestions on how to solve this problem; any help would be appreciated.

  Thank you!

  Hello

  Try Microsoft 'Fixit' on the link below.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Kind regards

  DP - K

• my laptop was preloaded and hard drive crashed. Do I have to buy a new drive to install the new hard drive?

  My laptop that I bought in January this year has been preloaded with windows 7 starter. I don't have the installation disc. What I have to buy one in order to install the new hard disk

  Have you given up on trying to resolve why the computer won't start? You will need to provide more information about what happens when you try to start the computer. There are several reasons for which a computer does not start and a damaged operating system is only one. Please describe in detail what happens when you press the button.

  Remember that a computer bought in January 2011 is very likely still covered by the warranty.

  In the event of failure of the BSOD (Blue Screen of Death) system, if that's what you see, for most users there is sufficient time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  You can get the computer to boot by following the advice in the following link:
  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

• I want to buy the Photoshop now, but I'm pretending to change my computer very soon. If I buy the software now and install in my current computer, when I buy a new one, I can't install the new with the same license free of charge?

  I want to buy the Photoshop now, but I'm pretending to change my computer very soon. If I buy the software now and install in my computer run, when I buy a new one, I can't install the new with the same license free of charge?

  Did you want to say «which intends "instead of"pretend"?»  Assuming you did, the short answer is Yes.

  If you purchase a perpetual license for Photoshop CS6, you want to deactivate the software on your old system before installing it on your new system.

  If your goal is to reach the creative cloud, all you have to do is disconnect on the old system and the newspaper in the new system during the new installation of creative cloud with your Adobe ID

  I don't know where you intend to purchase your license, but I suggest on sources other than Adobe themselves.  There are a lot of fakers / scammers out there.

  -Christmas

• GarageBand wasn't able to install the new sounds

  I'm under GarageBand 10.1.2 & OS X El Capitan 10.11.6 on a Macbook Pro 13 retina "(2016).

  A couple of weeks, that I have installed additional drummers with no problems. I noticed, however, that many of the sounds in the sound library had an icon to download next to them; so I went to the GarageBand menu, option "Sound Library / download all the available sounds" and they begin to download immediately. Most of them have installed fine (and is still usable), but at some point the download has stopped and a window appeared with the message "GarageBand wasn't able to install the new sounds. Close and re-open GarageBand to download and install again. »

  Since then, whenever I open GarageBand, downloading continues automatically, but after a few minutes I get the same annoying message.

  I searched the Internet and tried all the following without success:

  (1) closed and reopened GarageBand

  (2) given in market system

  (3) delete the folder "/ private/var/folders/lq/nb_0wt4d1zq5rs933745flww0000gn ' and all its contents

  (4) remove the "user/Library/Caches" folder and all its contents

  (5) the latest version of Java from Oracle (update version 8 101 - build 1.8.0_101 - b13)

  I always feel the same frustrating lock when I open GarageBand (download starts and after a while it stops and the error message shows up again... and again once).

  I've included some screenshots on this post below, which illustrate the issue.

  Thanks in advance for any help you can provide me with!

  

  

  Just to be sure - you have enough free storage to install all the new sounds? The instrument only GarageBand library has 14GB on my Mac.

  Until you try to install the sounds still launch the Console application and look for messages of diagnosis in the Console, when GarageBand gives the error message.  Are there clues, all messages associated with GarageBand in the Console window?

  Sometimes third part applications or incompatible system additions could cause this kind of problem, as firewall and antivirus software, for example, Little Snitch or Kaperski. If you have any of these installed, disable it before attempting to download the software.

  To prevent the non-standard extensions system to interfere, restart the Mac in Mode safe, before you try to install again, see: try safe mode if your Mac does not commissioning - Apple Support

• When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

  When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• After installing the new version of flash player firefox only charge for most of the sites basic html

  After you install the new version of Adobe Flash Player yesterday, Firefox would not charge most of the sites except in basic html, as I understand is the right term for all the lists in the text, especially on the left side of the screen. They open in Google Chrome and IE. I tried to restore to two days ago, today I uninstalled Firefox and re-installed, I have tried several possible solutions in the support forums, but nothing has worked. I prefer Firefox but it will fall if I can't get this resolved quickly. Note: I only start from the principle that the new flash player was to blame as it happened immediately after. I don't really know yet what he does, it's just one of those things that appears and says he has to be upgraded to the latest version from time to time.

  The Flash player plugin allows certain types of media to be displayed in the web pages. Otherwise, you get an empty rectangle. Usually Flash would not hinder Firefox to load style sheets, images and other elements that add to the raw text of the page.

  You can try the reset function. It duplicates some data key of your active settings in a new file, bypassing some add-ons and custom settings. Your plugins (including Flash) will still be active, but may be disabled manually if you wish.

  More information in this article: Firefox Refresh - reset the settings and Add-ons. Please note that an old parameter file appears on your desktop. You might want to keep this around for awhile in case you need to save something from him

  Does make a difference?

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards