Windows 7 cannot print on the HP LaserJet 5 p printer

Similar Questions

• I cannot print PDF on any printer, windows 7, cannot print pdf as image file is

  I cannot print PDF on any printer, windows 7, cannot print pdf as image file is

  Hello

  Can I know if you get an error message when printing PDF files?

  Also, please try the steps from the article below mentioned.

  https://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  Thank you

  Abhishek

• Cannot install windows update, error: Windows Update cannot currently check the updates, because the service is not running

  Original title: Impossible to update Windows 7 on Netbook

  I have a Samsung Netbook running Windows 7, but can not run Windows Update

  Each ime that I try to run the update, I get the following message.

  Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  Hello

   
  Follow the steps from the links below and check if the problem persists.
   
  Method 1: Run the Troubleshooting Utility from the link below and check if it helps.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
   
  Method 2: Run the FIXIT in the below mentioned link and check if it helps.
  How to get the latest version of the Windows Update Agent to help manage updates on a computer?
  http://support.Microsoft.com/kb/949104
   
  Hope this information helps.

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Cannot run Windows Update in Vista 64 bit Ultimate. Download popup that Windows Update cannot currently check the updates, because the service is not running.

  Windows Vista SP2 from worm 6.0.6002 Build 6002.  KB2675157 Explorer 9.0.8112.  Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall).  My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running.  I ran last update of Windows in April and he was properly executed.  I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started.  I am able to run updates on all the software outside of windows.  I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products.  I don't have another PC with Vista I can compare the registry entries.

  Hello

  Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 3 :

  Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  Whenever I have click search for updates in Windows Update and it just gives me the error message: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer. Can someone help me please? I'm using Windows Vista Basic

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• HP Laserjet 4 MP: HP Laserjet 4 MP - just switched to Windows 10 - cannot print

  Hi - I used my Laserjet without any problems on Windows 7 but cannot print now that I went to 10 Windows.   The Laserjet 4 MP is listed on the page of the driver for Windows 10 HP, but the directions for upgrading the driver doesn't seem to work or there is something that I'm not enter.

  In "Devices and printers", my printer shows already that it is selected with the green check mark.  When I go to "Add a printer", it does not find the printer, even when you use the option 'my printer's oldest  So I went the next step, try using the IP address. Print my printer Config pages to try to find the ip address/port, but nothing seems to match them.

  Any ideas would be greatly appreciated!

  I went through all the steps of the Windows Update, found on pilots of widows 10 for Laserjet page mentioned above, but this time, instead of choosing the LPT 1 port, I chose the USB virtual port (I remembered reading on that port for an alternative online), and it worked!  (LPT 1 was probably active before a few years ago, I bought a USB connector for the cable to the printer)

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• HP 3055: 10 WINDOWS I CANNOT SCAN ON THE ALL IN ONE HP 3055.

  INSTALLED WINDOWS 10. HP 3055 PRINTS BUT NOT ANALYSIS. SCANNER CANNOT BE DETECTED BY COMPUTER, BUT IT SHOWS AS A DEVICE ON THE COMPUTER.

  PROBLEM SOLVED. SCANNER HP 3055 CANNOT WORK WINDOWS 10 UNLESS YOU USE THE METHOD OF ANALYSIS OF WINDOWS. THEN IT WORKS.

• Windows Update cannot currently check the updates, because the service is not running. But it is!

  When you try to run windows update on my win7 box family premium, I get the following message: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. »

  Steps has been involved:

  1. I restarted and even restored to the point when the last update was installed.

  2. I verified that the service is running and checked that there are no errors in the the event log for this issue.

  Any ideas?

  PA bear,

  I solved the problem, apparently, some of the dll files becomes involved in the process of updating Windows and just need to be reassocie but for the analysis patterns below are the answers to your questions:

  1 Win 7 Home Premium installation

  2 64 - bit OS

  3 avast! Full version

  4. no other anti-virus/anti-spyware has never been installed

  5. computer was custom built by me, destructive disk used on a new HDD before installing it so that it wasn't a possibility of always being on the disc software.

  6. I left on deployment (I'm in the army) and when I came back my wife told me that the PC was not able to download the updates since November of last year, so she switched off and left to me when I got home.

  Thanks for the quick reply, I was just in the difficulty that I used while watching a few messages on another Web site.

• Windows Update cannot currently check the updates, because the updates on this computer are controlled by your system administrator

  Error message appears when I try to change the Windows 7 update to automotive preferences, or try to manually get updates of Windows 7.  Using Win 7 Pro 64 bit on a computer at home.  I am the administrator and I can't find any relevant information in help or in a search of the forum.

  "Windows Update cannot currently check for updates because updates on this computer are controlled by your system administrator.

  That's what I get for taking!

  There is a big difference between be connected - one with administrative privileges (see your first post in this thread) and be logged on as administrator, especially in Vista & Win7. See the section "If you need help to determine if your account has administrative credentials...". "here: http://support.microsoft.com/kb/931712 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP cannot see that the internet can only see LAN

  We have a small network in my house. My router was set to WEP security (I know its too old, but my windows xp laptop computer does not work with WPA or newer). And I also added mac filtering for more security addresses. This network has worked well for 2 years.

  Meanwhile in a cell phone (that has windows XP sp3) so its wireless network broke, and we couldn't get living, then we just plugged on the router via a cable.

  Recently I had to reset my router because I forgot a password and I could add anything to the mac filter list.

  After that, I put at 'the original' for example WEP + mac filtering (only the passwords have been changed).

  Now everything is working fine, 2 laptops (both Windows 7 a), 2 readers, network all our phones smart etc can connect again, the only laptop (with Windows XP) problem.

  The XP laptop can see LAN (two disks) and router only (ping works), but in any browser (firefox, chrome, iexplorer) give me a Web site cannot loaded in the background: error 105, Err_name_not_resolved.

  I tried names ping (google.com) and different ip addresses (for example my ISP dns server address) but I get no answer 100% packet loss. I tried a lot of things that they did not help

  (1) has tried to change my XP for some fix + fix dns ip (I found these adressis in my router configuration/network configuration)
  (2) then I put back to dynamic ip once again in the line of cmd ipconfig release, ipconfig/reset, etc., I checked all addresses was going well everywhere (I mean gateway, DHCP server, dns server, looked well with dynamic ip too)
  
  (3) then I found similar position
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Networking/cannot-ping-outside-my-local-network/de73a1f9-ef4b-E011-8dfc-68b599b31bf5
  so I tried also what is in the post
  "netsh winsock reset" "netsh int ip reset" then "ipconfig/flushdns" then restart computer

  Nothing helped so I registered here, maybe I answer.

  you might need this information:

  the laptop has Windows XP service pack 3 language _german_
  Cisco EPC2425 router is
  The two networks wdstorage discs + mybookworld... I think they are the two Western Digital stuff. I'm not sure, I can look after if its important (I don't think)
  So, I got two disks still attached. (so 3 connection of the UTP in the router is used, two for disks for the windows XP laptop)

  If something is not clear, ask me please

  
  Thank you for your answer
  Robert

  Hi Robert,.

  Thank you for updating us the status of the case.

  I suggest that temporarily disable you the firewall.

  I recommend you to test name resolution

  A DNS server provides host name resolution. If you cannot connect to a server on the Internet by using its FQDN, there could be a problem with the DNS configuration of your dial-up connection to your ISP or DNS server of your ISP.

  To determine if there is a problem with the DNS configuration of your dial-up to your ISP connection, follow these steps:

  a. at a command prompt, type ipconfig/all, and then press ENTER to display the IP address of your DNS server. If the IP address of your DNS server does not appear, contact your ISP for the IP address of your DNS server.

  (b) to verify that your computer can communicate with your DNS server, ping IP address of your DNS server. The response looks like this:

  Rattling #. ###. ###. # with 32 bytes of data:

  Response to #. ###. ###. #: bytes = 32 time = 77ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 80ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 78ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 79ms TTL = 28

  The series of digital signs (#. #. #. #) represents the IP address of the DNS server.

  If you can't ping the IP address of the DNS server successfully, contact your ISP to verify that you are using the IP address and the DNS server is working properly.
   
  When you have verified the correct IP address of your DNS server, update the settings of your connection to your ISP's dial-up TCP/IP. To change or add a valid IP address for your DNS server for a dial-up Networking phonebook entry, follow these steps:

  a. in Control Panel, double-click network connections.

  b. right click on your Internet connection, click Properties and then click the network tab.

  c. click the Internet Protocol adapter, and then click Properties.

  d. click use the following DNS server address, and then type the correct IP address in the preferred DNS server box.

  e. click OK, and then click OK again.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Windows XP cannot print on shared printer Windows 7

  I've recently updated my Windows XP computer to Windows 7.  This computer has acted as a print server for the other 4 computers in the House, all XP sp3.  However, now that I updated to Win7 print server and installed the 64-bit drivers, none of the XP computers can print to the printer (Canon i850).

  The problem seems to be that the Windows 7 machine installed 64-bit drivers to be able to print to the printer, and these are unusable by Windows XP machines.  On the Win7 computer, I try too install the x 86 drivers (under the properties of the printer-> sharing tab) so that Windows XP 32-bit machines can print, but of course the Win7 machine won't let me because it is not a 32 bit OS.  I was hoping that if I did my Windows XP machines for the printer itself on the network, they would automatically install the required printer drivers but no dice.  I tried to manually install the 32-bit drivers on the Windows XP computers directly, and it gives me an error.  Simply, I can't believe I'm the only one facing this problem (machine Win7 acting as a print server on a workgroup with Windows XP machines), but I can't seem to find a solution to this problem.

  Thank you!

  The print driver names must match.  You will need to find a 64-bit driver that uses the same name that the 32 bit driver XP or install the 32-bit driver for Windows 7 on x 64 machine.  Because the files do not appear in the flat file on the 32-bit DVD format, you will need to ntprint of 32-bit Windows 7 files.

  If the pilots names then it is possible that coork has a better solution.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Cannot install message of updates that Windows Update cannot currently check the updates because the service is not running

  Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64)

  I get the message: ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "I rebooted without change.

  I have Vista 64-bit with installed MSE and it cannot update its virus database.  I have also Windows Media Center put up a TV and may not be able to download an updated Guide.

  Can someone help me please?  I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking.

  I found a few other forums similar to my problem, but I don't know that they are the same as mine.  I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem.

  Thank you!

  Hello

  1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages?

  2 did you do changes on the computer before the show?

  Method 1: Run the update utility

  See the following site:

  Problems with installing updates

  http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates.

  Method 2: Start services

  Make sure that the following services are started:

  a. Windows Update

  b. Background Intelligent Transfer Service

  c. Cryptographic Services

  To do:

  a. click Start, type services.mscwithout the quotes and press enter.
  b. double-click the service and under Service status click Start, if it is not started.

  Method 3: Reset the update components

  See the following site:

  How to reset the Windows Update components?

  http://support.microsoft.com/kb/971058.

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

  Method 4: Run the fixit

  See the following site:

  The problem with Microsoft Windows Update is not working

  http://support.microsoft.com/mats/windows_update/.

• Windows Update cannot currently check the updates, because the service is not running

  Whenever I try to update my windows vista with the recent service pack more computer, it tells me "Windows update cannot currently check for updates, because the service is not running." I'm running it from my admin account and I was curious to see if the same thing was happening with my other accounts. When I checked the they were fine and ready to go except the said that i needed approval admin even if I was giving him. I tried to turn admins accounts, but he wouldn't let me edit them, neither could I make a new account in general an admin or a fair standard.

  Vista service pack 1

  Processor: Intel (r) Core (TM) 2 CPU 4300 @1. 80 GHz

  Memory: 2.00 GB

  Norton 360 is my security system but did not install til about 2 weeks after a period of 1.5 years without protection (I was a fool, my computer had never seemed all operate differently) so I feel like this may be a virus any causing this problem cause, no idea on how do I fix? Thank you

  Thank you Matt, what ive down to realize, it's I'll just do a pc reinstall (what does this DVD) I know itll mean the deletion of all but ive already backed up what I need/want to so ill be fine. Dell Web site gave me all the information I need on how to do it.

• Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

  Original title: Windows Update service is not running / working and is not listed in services.msc

  When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

  "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

  * Restared several times-nothing has changed

  Despite what other threads have advised to:

  I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

   

  * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

  * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

  * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

  (Nothing is in the update history)

  Am really worried!

  Thank you!

  Hello

  
  Have you made changes on the computer before this problem?
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.