Be upgraded manually Windows 10 problem

Hello

I tried manually updating my Windows 7 to Windows 10. After you run the .exe file, and then it displays message on the dialog box indicating: "something happened"?

Can you help explain why is this happened and how to fix it? Or has anyone have the same problem when you try to update manually (from Windows 7 to Windows 10?

Your quick help is very appreciated.

Cheers, Andy.

Problem solved. Need to change the region setting and do the downloading. The rest is pretty easy. Cheers, Andy.

Tags: Windows

Similar Questions

upgrade to windows 10 problem

Today, I tried to upgrade my pc windows 7 to windows 10 but when I click on upgrade now, he says if please wait and then closes itself. He said that my pc is ready for the update but usually do, could you please help.

Review:
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:

Option 1:

Download the media creation tool

Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

Note: How to check if you are downloaded or installed the update Windows 10 November

How to create an ISO or USB drive.

Select upgrade this PC now and then click Next

Option 2:

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

after upgrade to windows installation problems

I have a Compaq cq60. I had vista windows until recently. Now, I've upgraded to windows 7 ultimate. I would like to know if my phone is compatible with the current version of windows. Another problem which started occurring after that I upgraded is im not being not able to video chat on facebook. video chat icon is simply absent. And im also having trouble installing some stuff (Skype and adobe flash player). Installation stops abruptly in the middle. I have tried different browsers google chrome, mozilla and ie. but it's the same deal. Y at - it a plugin, driver I need to install to be able to video chat? Since the video chat used to work properly when I had vista, im guessing this is a problem related to the upgrade of windows 7 ultimate. currently I don't have a service pack installed. Any help would be appreciated.

My laptop came with vista. But recently I started developing problems. It would have should go down abruptly. So I contacted a dealer near. When my laptop back t has been upgraded to windows 7. When I asked him about this, his response was that windows vista has been exceeded and windows 7 was a better. I'm not investigating the details. In any case, what are the options I have now? should I downgrade from vista? I tried to download Skype again today, but after downloading it said installation could not be copleted.

Indeed, you must reinstall Windows Vista that came with your computer. See the following thread on how to:

http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

Original title: teredo tunneling adapter error number 10 on windows 8

on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

Please help me

Thanks in advance

Hi Samuel,.

We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

Make the programs more compatible with this version of Windows

http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

A Code 10 error is generated in the Device Manager in one of the following situations:

1. the Device Manager cannot start the device.

2. one of the pilots who needs the unit does not start.

3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

We could try following common resolutions to solve the problem:

1. update the drivers for this device

2 launch a service of automated troubleshooting

3 contact material supplier technical support

For more information, please see the following article:

FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

http://support.Microsoft.com/kb/943104/en-us

In addition, this article could also be designated:

How can I troubleshoot network card?

http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

Please answer us on the State of the question to help you further.

PAVILION SLEEKBOOK 15: since the upgrade to windows 10 PROBLEMS

MODEL PAVILION 15 - b149ca

Since the upgrade to windows 10, the touch screen is not accurate. HDMI will not work and is missing the driver, my charging does'nt of battery itself and was going well a week ago. Also the light for does'nt mute his work more. I noticed that he stops himself from time to time... someone can help me!

Hello mf Qwerty... I can tell you how to get your computer fixed. .contact microsoft which were very good and I am now back to win 8.1 and still have old programs, music, and photos.

I was impressed by their useful service?... Go to their help page. ... www.microsoftsupport/Help... could be the address.

Serious manual Windows Update problem, need help

Hello when you run the microsoft update in the start menu, I am now getting a totally different message, then I have before I've never had this problem before when I'm trying to update I get the error message "403 - Forbidden: access denied."
You are not authorized to view this directory or page using the credentials you supplied. »

I have automatic updates turned off that I prefer to manually update.

This has happened only since I installed the microsoft security essentials, but I also got nod32 on my computer as I have now deleted these two and nothing will do, the problem persits, I decided just to install security essentials miccrosoft and I can't update as well as the exact message I get is as follows

"" microsoft security essentials was not able to verify the defination of virus and spyware updates
error code: 0 x 80004002

"" error description: the microsoft security essentials was unable to download definition updates, because your computer uses an older version of the windows update client or becvause windows could not start the service that transfers data.

I use 32 bit microsoft xp professional, sp3 installed with all the updates until about 3 weeks ago

Any help would be appreciated!

Thank you

Please stay with your original thread on this subject: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/89a95d94-0257-4250-a6bc-cc1bf08802b2

There are many more things that simply installing MSE.

Thank you.

Upgrading to Windows XP problems audio dv4 1125nr

I have a computer hp laptop dv4 1125nr delivered pre-installed with Windows Vista, I downgraded to Windows XP Pro, I have everything well... except for the audio driver.

I know allot of those that have come down to XP have this problem and allocate people have understood how to get the audio working... Well I can't understand it! Ive looked all over in the HP Forums trying to figure out, I tried to use Devcon... nothing works

I have install the MS UAA for SP3... because I have SP3... and after I installed... it says that it detected a new hardware... as it should be, right?

and I realize that I have all of a sudden I have audio... and in a post on the forums of hp, it says to go to Device Manager and update driver UAA High Definition Audio Bus or something like that... Well the only thing that there is no "IDT High Definition Audio CODEC"... everything works fine... until I restart... then he says that there is no audio device... but if I go to control panel and go to add or remove programs... IDT Audio is here.

Ive tried to use Devcon to fix this usse... but I just can't understand... nothings working...

If someone can show me how to get my audio working step by step... that would be great!

Once again, my lapop is a hp dv4 1125nr with Windows XP Pro Sp3

Did you update to the latest version of the BIOS ? Some have reported that solved audio problem.

Upgrading to windows 7 problem

I have a new HP Pavilion pc p7-1512 windows 8. 8.1 no or professional. I'll still be able to downgrade to windows 7? I read where HP has blocked it if I use windows 8 Professional. I went into the BIOS, active inherited and tried to change the order of boot on CD/DVD, but it still load windows 8 every time. So... is it possible to make this downgrading on this machine? Any help would be appreciated. Windows 8 is useless to me and I'm scared, I lost $500

Thank you

Hello:

You must also disable the secure startup parameter. There are two BIOS settings that need to be changed in order to install and run W7...

http://support.HP.com/us-en/document/c03659945

Re-installing CS3 on computer upgraded to Windows 10 - problem with serial number

I rebooted just CS3 after installing Windows 10 on my laptop. When I enter the serial number, I get a message that says that the number is not valid.

Error: "serial number is not valid for this product". Adobe Creative Suite

Problems with sleep and stopped after upgrade to Windows 10

Hello

So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

Any solution to this problem?

Thank you.
1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver. If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver. (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
6. Change back the setting of Windows Update Services to manual automatic (delayed start).
7. Restart your computer.
8. Rejoice! You can finally sleep and stop again.
-DanG

Solution for Webcam sleep & back problems after the upgrade to Windows 7

Just thought I'd share the solution I recently found a problem I've had since a Satellite Pro A200 GE 26 Q of the upgrade from Vista to Windows 7.

I installed the software webcam for windows 7 on the toshiba site and built-in Chicony camera would work very well after a reboot, but if the computer is in sleep for a long enough period, the unit would stay asleep when the computer woke up and wouldn't work at all, unless the computer has fully restarted.

The solution lies in a change in the registry to force the computer to update the webcam USB controller is attached, after the release of sleep. It was apparently the default for Vista when it was released, but was changed in Vista SP1 and Windows 7. Designed for Vista original material which did not have its drivers/registry updated entries could therefore be subject to a failure because of changes to the default settings through the updates of windows. Toshiba, it seems, do not think that this issue then of the extinction of the registry fix for Win7 upgrades for the satellite Pro A200. Therefore fix manually.

The article where the solution is here: [http://support.microsoft.com/kb/928631]

You do NOT have the file of the fix, you must only make the change to the registry described later.

You need turn on the camera while you do the following to make sure that it appears in Device Manager correctly.

Step 1: Determine the specific USB host controller

# Click on * early *, enter devmgmt.msc #the * search * box, then click on * devmgmt.msc* in the * list of programs.
# The * view * menu, click on * devices of * connection *.
# Expand the processor node. For example, expand * ACPI * Multiprocessor PC *. (In my case, * ACPI x 86 based PC) *.
# Extend * system compatible ACPI Microsoft *.
# Extend * PCI Bus *. Several USB host controllers will be listed.
# Expand each USB host controller node, and then expand successive subnodes until you find the name of the device that is failing. For example, the device entry might look like the following: ACPI Multiprocessor PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB Universal Host Controller - drive root Hub\fingerprint 2830\USB * (Note: for me, I found the webcam to ACPI x 86 PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB2 Enhanced Host Controller - 283A\USB Root Hub + USB Composite Device\Chicony USB 2.0 Camera-based) *.
# When you have located the device, right click on the associated and then USB host controller click on * properties *. In the example that is listed in step 6 you would right-click * Intel(r) ICH8 Family USB Universal Host Controller-* 2830, then click on * properties *. (* Again, for me it was different - ICH8 Family USB2 Enhanced Host Controller - 283 a *).
# Click on the * details * tab.
# Select * pilot key * in the list. The driver key will look like the following. Note the last four digits of this driver key. {36fc9e60-c465-11cf-8056-444553540000} \0002 * (on my system it's: (36fc9e60-c465-11cf-8056-444553540000) \0005*).

Step 2: Add the ForceHCResetOnResume registry value for the USB host controller

# Click on * early *, type regedit #in the * search * box, then click on * regedit.exe* in the * list of programs.
# Find and then click the registry subkeys that are similar to the following: * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class{36FC9E60-C465-11CF-8056-444553540000}\Four-digit_number.* in this step, the numero_a_quatre_chiffres is a placeholder for the USB devices in the system.
# You must search the registry subkey by using the value that you noted in step 9 above. For example, if the key of the pilot to step 9 is * {36fc9e60-c465-11cf-8056-444553540000} \0002*, then you need to get * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class {36FC9E60-C465-11CF-8056-444553540000} \0002. (For me, as mentioned above, this was \0005 (36fc9e60-c465-11cf-8056-444553540000)). *
# On the * Edit * menu, point on * New * and then click on * DWORD value *.
# Type# * ForceHCResetOnResume * to the name of the DWORD and then press ENTER.
# Right click * ForceHCResetOnResume * and then click on * edit *.
# In the * boite box the value data, type# 1 and then click on * OK *.
# Exit the registry editor.
# Restart the computer.

This fixed the problem for a long time for me. I'm writing this in case it helps someone else who has the same problem. If anyone from Toshiba never reads this, you might consider adding the registry fixes for upgrades of windows 7 on the download page for this & all other models affected.

Big Hey what s announced and detailed, thank you! :)
I m wondering how you discovered it.

But I want to add something: before you make or change something in the Windows registry, make a backup of it. In the worst cases, restore you the old Windows registry. Just to be sure ;)

Problem with Windows Vista Home Premium SP2 do not update, will be upgraded to Windows 7 fix this?

I have Windows Vista Home Premium SP 2 with 32-bit. I have problems with the download of updates and with it closing. I want to know if I upgrade to Windows 7 If this will fix my problem. If so, where do I need to buy. Thank you

Hello

upgrading operating system does not always solve the problems.

You can take the problems with you

see if that helps to fix:

How to reset the Windows Update components?

There is also an automatic 'fix - it' here

http://support.Microsoft.com/kb/971058

Also, try to put the KB numbers in the search on the link below and then manually download the

http://www.Microsoft.com/downloads/en/default.aspx

or repost in the correct windows update forum

and include the kb numbers update and error codes

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

For more information windows 7

Windows 7 upgrade advisor

http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

Windows 7 upgrade paths

http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

Windows 7 forums

http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

Answers by topic

the upgrade to windows 7 will eliminate current problems

My wife's cell phone is currently running Vista. One day the phone let out this blood, and that the said laptop curdeling scream has been infected. I contacted IYOGY, and apparently the laptop had several viruses. They cleaned remotely and installed their anti virus, THE SHIELD. He has never been the same. It takes like 15 minutes or more to start, and that it runs slower than you can imagine. I thought maybe I could upgrade to windows 7. Who would solve the problem?

My wife's cell phone is currently running Vista. One day the phone let out this blood, and that the said laptop curdeling scream has been infected. I contacted IYOGY, and apparently the laptop had several viruses. They cleaned remotely and installed their anti virus, THE SHIELD. He has never been the same. It takes like 15 minutes or more to start, and that it runs slower than you can imagine. I thought maybe I could upgrade to windows 7. Who would solve the problem?

In place upgrade likely would do nothing to solve your problem. If your system is still host malware, that may very well be the source of your problems, the upgrade would not wipe out unless you do a clean install. Your best option is to either a destructive restore to reinstall Vista on the recovery partition (if your computer has a restore partition - check your owner's manual) or by using the installation diskettes that may have come with your system and opting to allow the reader to be wiped.

Problem upgrading from Windows 7 to Windows 10

I am trying to upgrade my Windows 7 computer to Windows 10. I use firefox as my browser. I clicked on the download link on the page of Microsoft, I down load in the load file. When I click on the link to launch the mild wear, a box with a red X in a circle appears on my screen and declares that a required privilege is not held by the customer. I'm the rumming of the only person from my computer. Also, this message came when I try to upgrqade firefox. What could cause this problem. I want to upgrade my computer.

What happens if you try to run from Internet Explorer?

If you find it difficult to do some of the steps below, please see instructions how do their:

http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

If you encounter an error about enough space to perform the upgrade, see the instructions:

How to install Windows 10 on devices with limited space

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:

Option 1: Using the media creation tool

Download the media creation tool

Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

Note: How to check if you are downloaded or installed the update Windows 10 November

Select upgrade this PC now and then click Next

Option 2: upgrade using the file ISO for Windows 10.

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.

Problems with the upgrade to Windows Windows 7 10 and get the message 'could not be updated. "portable

Original title: Windows 7

I have 2 questions-

I have a laptop Windows 7 when I tried to update Windows 10 received a message that it could not be updated. Has there never been a solution or an update for those of us who have a version of Windows 7 which initially could not updated for Windows 10?

I have a computer I upgraded Windows 10 and really like it. I do not understand that I can not make a copy of 10 Windows on a computer, I've updated for Windows 10. Is it possible for me to download a copy of Windows 10 on my laptop Windows 7 to make a restore CD in the case of a computer problem?

You can try the upgrade manually:

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
You also have the possibility to choose 'Keep personal files only', which guarantees a successful in most cases installation.

Be upgraded manually Windows 10 problem

Similar Questions

Step 1: Determine the specific USB host controller

Step 2: Add the ForceHCResetOnResume registry value for the USB host controller

Maybe you are looking for