Beats Audio, computer remains

I rest my computer and now my sound does not work and I have no audio beats.

Thank you

Hello! @AOZ, thank you for joining the HP Forums!

I understand that beats audio does not work on your computer.

Please try a few steps mentioned below.

Go to the windows desktop
Hold the Windows key + the letter R key.
Run dialog box opens type devmgmt.msc
The Device Manager window opens.
Righ click Menu select Update driver software.
Select Browse my computer for driver software.
Select let me pick from a list of drivers for devices on my computer.
Click next and follow the instructions and click Finish.
Choose the Audio device high definition.
In the update driver warning, select Yes.

Please provide the product number and the operating system of your computer. So, I can get you a better solution.

Let me know how it goes!

Have a great day!

Tags: Notebooks

Similar Questions

  • How do I reinstall BEATS AUDIO into my computer TOUCHSMART from HP ENVY TILT 27

    Hello. I had a big problen in my TOUCHSMART from HP ENVY TILT 27 computer, so I had to wipe everything out. The operating system that I had before, was 8.1 windows so I had to BEAT AUDIO, and now I have installed Windows 7 then beat Audio disappeared. Can someone tell me how to install it back.

    Hi there @Miguelaq,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that wipe you the drive and installed Windows 7 and now you're trying to find the Beats audio software. I'm happy to help you with this. Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

    With the model I can link the appropriate support page. Normally the Beats Audio software is part of the audio, such as driver for the IDT audio device.  Have you used a stand-alone OS disk to install Windows 7, or you use recovery media?

    Please let me know.

  • Beats Audio: HP ENVY Beats Audio Windows 8.1 portable computer m4

    I had to replace the hard drive of my laptop and my Beats Audio speaker volume is not as high as it should be.  I guess that a driver must be installed.

    I am running Windows 8.1.

    Please tell us if it is a driver problem and where can I find the necessary drivers and installation instructions.

    Thank you

    Please try the driver from the following link:

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59576.exe

  • HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

    Hello

    So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

    If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

    I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

    Thanks in advance.

    Hello

    I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

    Kind regards.

  • Beats Audio has completely disappeared from my HP Envy 6 1010ea

    I've recently updated my ultrabook and the beats audio Panel completely gone!

    It was working fine before the updates (which have been "recommended by HP")...

    I can still change the function of power on and off beats using fn + b but when I go to open the audio control beats it says boot file not found...

    Any help?

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56717.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

    Kind regards

    DP - K

  • Beats Audio does not work! Features totally lost!

    Computer laptop HP Envy Touchsmart 14 specifications

    Processor - Intel i5 4th Gen

    NVIDIA GEFORCE graphics

    Hey there,

    I recently updated my laptop for Windows 8.1, and there has been problems galore. Beats Audio has stopped working. It seems rather, he is always on even though I don't want whatever. Using fn + B does not help, nor does the activation or turn it off via the control panel Audio Beats. Initially I couldn't even check box on the tab 'Listening experience' in the control panel. After you follow the steps in this thread - http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Can-t-turn-on-Beats-Audio/td-p/1201775

    Now I can manage check or uncheck the option in the Panel, but it has NO EFFECT.

    This turns out be extremely annoying, please help me understand this.

    Hello piezoelectron

    I'm sorry it took so long, but I think I have the solution for you here. I've updated a notebook here to 8.1 and after several attempts but I have the same problem you have. To solve it, I simply used the Recovery Manager to update the HP Quick Launch software provided on the laptop. Try following the steps below to see if that solves your problem.

    Step 1. The type of menu tiles "Recovery."

    Step 2. Choose Recovery Manager

    Step 3. Drivers and reinstall Applications

    Step 4. Choose the software of HP Quick Launch

    Step 5. Install

    Step 6. Restart your computer

    Now, this did not bring the Beats Audio Control Panel for me but he doesn't turn Beats Audio on and off the listening experience which is what you're after.

    I would like to once again thank you for posting on the HP Forums and hope that this solution solves your problem. Have a great weekend!

  • PC laptop Pavilion 17: Beats audio with Windows 10

    No Beats Audio since the update of Windows 10.  I tried a lot of the answer key, none does not work for me.

    Product # L0Q89UA #ABA.

    Thank you

    Rob

    Hello

    Try the following.

    Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72043.exe

    When the reinstallation of Chipset is finished, stop the laptop.

    Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

    Kind regards

    DP - K

  • HP Envy 17 t j100: deleting Beats Audio

    Hello.

    I searched the forum and followed the instructions to remove the Beats Audio crapware.  Unfortunately, after removing it reinstalls itself.

    The instructions are:

    • Press Windows + R.
    • Type msconfig and click OK.
    • Click the Startup tab.
    • Uncheck the IDT Audio from PC.  It is not possible on 8.1 - can only disable
    • Click apply.
    • Reset.
    • Press on Windows + R.
    • Type devmgmt.msc , and then click OK.
    • Expand sound, video and game controllers.
    • Right click on IDT device and click Uninstall
    • Select the check box to remove the driver.
    • Reset

    So I did all that with the change in red.  The next time that I restarted, IDT reinstalls itself and beats audio is still active.

    What is strange, is that the Audio driver IDT High Def showing is a product of Ms.  Bat is not.  But there are a lot of SRS DLLs listed.   I don't know how many of these problems are related to hardware and how is 8.1.  I got beats on my computer Windows 8 with no problems.  But all of a sudden with this new computer running 8.1, I can't change anything.   Well this is not true, I can change everything and restart seems to reset at the front.

    Thanks for any help.  I'm trying to get Asio4All to work, but it is apparently not compatible with Beats, that causes the problem.  And Asio work is much more important to me than the beats.

    Thank you

    Hi there @dzilizi,

    I understand that you want to remove with Beats Audio from your system. I'm happy to help you.

    In Notepad HP Beats Audio edition, Beats Audio software is part of the IDT Audio driver. You can try to remove your current IDT driver and install a compatible version not Beats Audio. Or you can use the generic operating system driver.

    I found a beautiful little youtube video which shows a method to do this. HP laptop: Disable Beats Audio Driver

    I hope it helps

  • Beats Audio Driver for laptop HP ENVY 6-1002tx

    Hello

    When I bought the HP ENVY 6-1002tx Notebook PC, it works on Win 7 and works perfectely. But after the upgrade to windows 8 Pro I lost the audio driver Beats. System is still having IDT high definition Audio codec, but I want the original Beats audio for my laptop.

    pls help

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58635.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    Chipset Driver - Windows 8.

    Once done, press and hold the SHIFT key when you click shutdown , completely power down the laptop,

    When the laptop is turned off, press and hold the button for 10 seconds.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • Beats audio software missing after installing windows 8.1

    Hi all!

    I have a problem I would like help with. I just upgraded to windows 8 to 8.1, but now the beats audio/software interface is missing, and I can't get it back. What should I do? I have a HP ENVY m6-k088ca Sleekbook.

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61792.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, turn off the phone by holding down the SHIFT key when you click on close to temporarily prevent a "boot hybrid.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set as default.

    Restart the computer again, then check if the Beats audio Panel is now listed in the control panel.

    Kind regards

    DP - K

  • HP ENVY 17 t - 2000 CTO 3D: Beat audio error! HP ENVY 17 t-2000 technical 3D Director

    Hi, last week my beat audio leave work. The Committee has also disappeared. I tried to reinstall the driver IDT since driver's Web site (it is detect my laptop perfectly) after reinstall audio IDM some time the noise disappeared.

    I download the audio drivers here using auto-detection:

    http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-2000-3D-Edition-Notebook-PC-series/504623...

    Please help me... It's a little frustrating.

    The driver I have download is: driver Audio IDT high definition (HD) - sp52562.exe

    Thanks in advance

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52562.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50557.exe

    When the reinstallation of Chipset is finished, stop the laptop.

    Disconnect the power adapter.  Press and hold both the power button / stop and pulse for 15 seconds, then release.

    Plug the power adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

    Kind regards

    DP - K

  • Want Sleekbook m6: Beats Audio Control Panel disappeared after the update of the 10 anniversary window

    Hello.

    After upgrading my OS Windows Anniersary Update 10 last week, my Beats Audio Control Panel disappeared. The audio is not yet, but the EQ settings I had set by beats do not seem effective. The IDT drivers seem to be installed and updated according to Device Manager.

    Thank you

    @hm8

    Hmm...

    • Create a Restore Point
    • Download the Audio driver from the Support page of the drivers of your computer for Windows 10

    Uninstall the driver from Device Manager > restart (or search the hardware changes) >

    If the driver is available in your file system, it will try to reinstall it at startup / login >

    Check the results

    If no joy:

    If HP drivers are available for Windows 10 for your computer:

    Download and install the Chipset driver > restart and sign

    If the Audio driver is available in the Support page for the drivers for your computer:

    Uninstall the driver from Device Manager AND check the box to delete the driver >

    Restart and log in >

    Install the driver from the driver of your computer support page.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • Pavilion 15-p027tx: Beats Audio not start on windows Startup

    I updated my Hp Pavilion windows 10 p027tx when windows 10 has been released. But 2-3 days before I updated my drivers little to the last version that was available. I've also updated the audio driver realtek. But the problem is after update, Beats Audio does not start on starup windows. Beats Audio is still there but I have to start it manually by searching on it. Earlier, it allows to start in backgroud with an icon in the system tray. But now it doesn't. I have to start it manually. All the solutions to this?

    Hello

    Another option would be to add the missing registry key which you can follow these steps.

    First, hold down the Windows key and press R.  In the run window, type : starting the interpreter, hit enter and then delete the boot entry you added earlier.

    Before you begin, click the Start Menu, select settings, select system, Notifications & actions select on select icons appear in the taskbar - make sure that that there is not an entry for "Realtek HD Audio Manager" which is just off."

    According to what you find, follow these steps.

    1. if there is an entry for "Realtek HD Audio Manager", set it to On and restart the computer and see if it fixed the problem.

    ***********************************************************

    2. if there is not an entry for "Realtek HD Audio Manager", hold down the Windows key and press R.  In the run window, type regedit, press ENTER, and then click 'Yes' to the uac prompt.

    Go to the following.

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run       (click on Run to make sure it is highlighted ).

    In the larger right pane, right-click on an empty area, move the pointer over new, and select string value.

    Name RTHDVCPL and press ENTER.

    Now, do a right click of RTHDVCPL and select Edit.

    Copy the entry below and paste it in the "Value data" field

    "C:\Program Files\Realtek\Audio\HDA\RtkNGUI64.exe" s

    Click Ok to save it.

    Close the registry editor and restart the laptop.

    When windows has reloaded, click on the Start Menu, select settings, select system, Notifications & actions select on select icons appear in the taskbar - make sure that the entry for "Realtek HD Audio Manager" is set to one.

    Kind regards

    DP - K

  • HP Pavilion dv7-4190us drivers for Beats Audio and MediaSmart Webcam

    Nice day. I bought a Pavilion dv7-4190us last December 2010. I loved its audio quality. However, I recently formatted the OS due to some MBR problems. I managed to get most of the software I need to save for Beats Audio and MediaSmart Webcam.

    For Beats Audio, I find not everything on the page for the driver for my laptop model. For MediaSmart webcam, I downloaded and installed sp51029 but nothing happened. Someone knows what's the problem?

    Hello

    Try the following to see if you can install HP MediaSmart Webcam.

    First, download the MediaSmart Webcam Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp51001-51500/sp51029.exe

    Then, if you do not have an extraction utility installed, download and install 7-Zip.

    Now, open your download folder, click with the right button on the HP MediaSmart Webcam Installer, select Extract 7 - Zip, select the files and then click Ok.  Open the newly extracted folder, open src and scroll down until you see the application setup ( 12th from the bottom with a size of 310 KB ).  This Application Configuration right click and select "Run as Administrator" to launch the installation.  Once installation is complete, restart the computer and see if the Wecam software has been installed successfully.

    Kind regards

    DP - K

  • ENVY 17 j141nr: Beats Audio driver gone

    I had problems with my upgrade for Windows 10 of 8.1 and the fix was to re - install Windows from a boot disk. Now that I did, the re - install appears to have removed all my for Beats Audio and a few other drivers (HP drivers for my biometric scanner, etc.). I'm not entirely sure where to go to download these drivers, or if they work with Windows 10.

    Details:

    My computer will play sound on the speakers by the pad, but the Beats loudspeakers above the keyboard do not play good at all.

    I have reset the audio driver, but the Beats Audio driver is not found.

    You can download the drivers from this link:http://www8.hp.com/us/en/drivers.html.

    Note: If you can not find the drivers for windows 10 right now from this support site, you can download and install the drivers for windows 8.1.Most of them works also with windows 10.

    You will get Beatsaudio driver & software automatically when you install Realtek Audio Driver.

    [You can also get drivers from windows update, but you won't find that all Windows update]

Maybe you are looking for

  • Portege M400: I can't move courso continually - strange string appears

    Hi, my M400 makes problems:Sometimes the mouse is "sticky", it means that I can not move the pointer constantly. This often appears with some cpu - load, example at startup.A few times it appears the "^" string when the tying, or that it produces a l

  • Functions of mixture for three simple trapezoidal profiles

    I'm trying to learn how to use the functions OR Motion Assistant, LabVIEW to create my own profiles, but I fight to get mix to work. In the attached VI, I take three simple trapezoidal profiles and try to mix them. The code is based on the example pr

  • Declaration of invalid function generating a range of service

    Greetings- I am trying to create an instrument in 2013 CVI driver.  My successfully the DLL builds, I then open my header with my export file and select options-> generates a function tree.  All my statements of functions return with "invalid functio

  • HP envy m6-p113dx: m2 location empty in HP envy m6-p113dx

    Hello I recently bought a HP envy m6-p113dx laptop.   form downloaded to this product HP website the user guide, there is a mention on this laptop with two slots m2.  The one occupied by the Wifi/Bluetooth and another location module vacuum/free m2.

  • WRT 400n lost internet

    I have been using my wrt400n(v1.0.01 B19) for several months now, and with the exception of the security set and get the "n" to run it worked fine until this morning.   Woman woke up before me, connected to facebook/farmville, etc. and was running.