BEEP running on 1 - CPU

Similar Questions

• game does not open on steam, but says its running on the CPU usage

  football manager 2011 order opening via steam as usual. but it shows that it is running on the CPU usage

  Hello

  1. what version of windows is installed on the computer?

  2. were you able to play the game before?

  3. what browser do you use?

  I suggest you to give us more information about the issue so that we can help you better.

  It will be useful.

• HP DC7700 SFF: DC7700 SFF - No Beep with no ram, CPU hot, Hot, Hot GPU - STATION Chipset NOT

  Hi I have a DC7700 who is not a beep or anything like that and no video display.  I have two we DC7700 SFF BIOS is damaged will need to perform a recovery of the standard BIOS I am guessing Via USB AND BIOS. WPH RIGHT?

  https://www.BIOS-mods.com/BIOS-recovery/Phoenix-BIOS-recovery/

  Try to get the Xeon L5320 at work that I got this message...

  

  In any case DC7700 is not posting the cpu is hot, the northbridge is hot and the gpu gets hot.  Tone post with e6300 with ram.  I have two e6300 and tested both.  It will beep every time if I drill the cover on the lga775 socket, while it is on.  Otherwise, I get beeps...

  Thank you

  T7500 - Dual Xeon X 24 son @ Over 1 terabyte/s
  16 GB Triple Channel DDR3 @ 35 GB/s
  HyperDuo of e/s 1 TB + SSD @ slow b/c of $15 SSD
  GTX 580 @ 900 Mhz @ 43 billion, 200 million pixels per second.

  Thank you very much Sir for your advice, I appreciate it.  Thank you and have a nice day.

  DC7700 has a cpu socket problem where it will blink red and beep if the cpu is not "sitting" remove the processor and replacement in different ways etc will allow it to function normally.  Well that does not support DC7700 Q6600 DC7800 sff motherboard would be in the order of $15 on ebay it fits dc7700 sff chassis.

  * SOLVED *.

  Ended up literally having an empty 2GB FAT16 USB FLASH DRIVE with only the last v116 bin to the root.  Start the PC with the USB in the port before, said flash has successfully and it is up and going again.

• Why my svchost.exe process constantly runs at 100% CPU usage?

  Recently, my computer was extremely slow.  I thought that was the cause of a worm or virus but after I used Norton to take care of that my system is still slow right too. When I checked my system process, its display svchost.exe using a massive amount of memory. Therefore, my CPU usage is constantly at 100%.  Is it still the result of a bug? Or do I have to look elsewhere as the source of the problem? Thank you

  It is possible that a recent update of Norton was faulty or caused one conflict with another program on the PC.

  Activity excessive svchost.exe is often linked to one of the following:

  1 resource hog like Norton or McAfee (sad but true)

  2 be linked in Microsoft Update instead of Windows Update

  3. after having been updated for Windows Search 4.0 and its endless reindexing

  4. the presence of malware

  Unless you have uninstalled Norton AND used their removal tool, I doubt you really deleted ALL occurrences of Norton!

  FWIW, I helped a neighbor recently with his performance problem. The culprit in his case was Windws Search 4.0. And since there is no entry in the Control Panel Add / Remove programs to KB940157, I needed to follow the instructions offered by Nepatsfan here:

  http://help.WUGNET.com/Windows/uninstall-Windows-search-Windows-XP-KB940157-ftopict624142.html

• Firefox running @ 15% of CPU and constant hourglass flashes all web pages that in firfox

  Last product installed was Dropbox

  See photo below, it was a trogen, from a downloaded file, called sp_mdt_src_v3.rar. It's a link that has been redirected from the podium of a response by a user to search for a particular file. Good job Vipre. Problem solved. !

• Can CPU overheating if Portege R930 goes into sleep mode?

  I have an a Portege R930. I run an application of 25-30% of the CPU for long hours. If I put the laptop in mode 'sleep', the calculation get suspended? If not, and it is still running, how the CPU is cooled when the fan is off mode 'sleep'? The CPU can overheat?

  I * don't * want my program from several hours to be interrupted by a detector from overheating. If I know that the program is suspended in mode 'sleep', I fear enter "standby" mode. If this isn't the case, so I'll keep the laptop awake, and if I need to carry the laptop, I'll put it into hibernation.

  The answer seems to be that the CPU cannot fire because the programs are suspended: http://forums.toshiba.com/t5/Port%C3...p/689961#M4014

• Portege will extinguish after iTunesphotoprocessor.exe gets the CPU to 100% usage

  Hi all

  I am having a problem with my Toshiba Portege and sync with my iPad2.

  I'm syncing large amount of photos to my iPad, when synchronization progess is at the stage of optimization photos iTunes runs two processes iTunesphotoprocessor.exe and the CPU usage is 100%.

  The Toshiba fan then runs at full speed until the immedialtey of the computer turns off.
  It is not a normal shutdown of Windows 7 64-bit. It's an energetic power loss, while the Toshiba is on a/c.

  I can reproduce the same with my iPhone 4.

  I thought I should use a USB hub with an adapter separated instead, unfortunately, there is no difference.

  It is not only synchronize photos that it occurs also when I sync movies and only iTunes.exe running at 100% CPU usage.
  Which brings me to the conclusion that the iPad draws a lot of power of the Toshiba until the laptop is on its knees.

  I use external drives (not USB powered) and can copy a lot of data without any problem.

  Perhaps worth mentioning that I have improved the Toshiba two months ago for Windows 7 64 bit and installed all the 64-bit drivers found here on the forum with the upgrade of the BIOS.

  Any hint is appreciated.

  Thank you

  Hello

  In my opinion this has nothing to do with the power supply or the power adapter plugged.
  The iTunesphotoprocessor.exe belongs to the iTunes software and in my opinion this software highlights the laptop CPU s that cause automatic shutdown!

  This means that it is not a problem of laptop but the Apple software.
  I m not sure if it s a compatibility issue with 64-bit Windows system, but he s certainly an iTunes problem

  So, in my opinion, you need to reinstall this software to see if that would help
  You can uninstall this software from the system and could clean the registry with CCleaner, it helps to clean the registry
  After that and after new restarts, you can try to install a version compatible 64-bit iTunes maybe it helps

• [W510] crashes during use heavy CPU/GPU | possible overheating

  Hello

  I have a problem with W150 6 - week old I am just unable to provide. I tried a fairly recent game to test the hardware capabilities of my new camera. However, when running this game, it crashes at irregular intervals.

  MACHINE:

  ThinkPad W510, 4389-W1B Type

  Intel i7 Q70

  nVidia Quadro FX 880 M

  4 GB OF RAM

  Windows 7 Pro 64-bit

  SETTING:

  The game in question is 'Mass Effect' (2008) with graphics almost maxed out settings (720 p and maximum of details). The machine has all the latest drivers and BIOS installed.

  BEHAVIOR:

  The machine is appearently under a heavy load of CPU/GPU with the fan at the highest speed. The causes of the accident the screen go blank and feeding the machine in less than a second after a short hard disk activity. The time until the machine hangs when running the game differs between 3 to 30 minutes.

  COMMENTS:

  I installed the tools, namely TPFanControl and SpeedFan temperature monitoring. The CPU does not get like 80 degrees Celsius, the temperature of the GPU also doesn't exceed 80 degrees Celsius. The accident occurs only with this game of 3D acceleration. However, it is the most demanding game I posses. The question seems to be temperature related since it usually takes much more time to plant the device switching on after a long time being turned off, or in a cooler environment.

  SO FAR THE TESTS:

  I have run several tests of stress on the machine, namely of Prime95 (max CPU temperature: 86), FurMark (CPU: 85, GPU: 80 c) and 3DMark. All passed without accidents (when running for about 1,5 hour maximum). I got the latest nVidia drivers installed, as well as the latest graphics drivers approved by Lenovo. I tried other games with resolution 1080 p and maxed out settings, but the accident only with "Mass Effect".

  CONCLUSION DATE:

  Like many, I can tell, when you run the game, CPU or GPU become warmer than during the stress tests. Nevertheless, the problem "seems" related to temperature. The fact that I don't have to plant with any other game machine or a stress test makes me assume that Mass Effect is just wrong with Windows 7 or the material. However, to my knowledge, bad code or bad drivers do not cause such a crude system shutdown.

  Well, I really don't know what o think about it. I don't want to make use of Lenovo support, unless it is really an anomaly in the system. I would need to get along without my laptop for 2 weeks, which is a long time in view of the fact that it is my primary work machine.

  So my questions to the community are:

  1. is it possible that this is a temperature related problem after all? Despite the positive stress test?

  2 is it possible that these accidents are caused by bad drivers or bad programs?

  Tips are greatly appreciated...

  I don't think it's an overheating problem, it is more likely a software/driver problem or a hardware problem. I am inclined to think that it is the last.

  The system should go in a judgment of thermal overload until less than 95 degrees. 80 degrees is on the beach of normal operation for the GPU and the CPU temperature when loading at 100% load.

  Try to disable the Turbo mode, also have you tried to perform a test on the ram?

  In addition, update a bios may be a good idea if you don't have it already done.

• Registration Wizard works 100% of the CPU after the Installation of LabVIEW

  After installing LabVIEW and restarting, the registration wizard runs at startup [silently in the background], does nothing notable and eats 100% of a CPU core... that is, core runs at 100% CPU usage.

  This has happened for quite some time now, since perhaps versions 2010 or 2011 LabVIEW and ultimately annoyed me enough to post because it is not fixed.  Obviously others have had the same issue as well, who went in abeyance... see this post: Assistant registration OR 50% of the CPU

  In these cases they report 50% or 25% CPU because it is what happens when you have a dual or quad-core with one fully used heart... it is eating 100% of one heart, but gets divided by 2 or 4 on a quad-core or dual system and appears to be 50% or 25% CPU usage.

  The workaround is obviously just to stop the boot at startup record Wizard, but really... have to solve this problem, whenever LabVIEW is installed... not ideal.

  I'm running Win7 x 64.  I have the wizard registration market with trillions of cycles after my last CPU install LabVIEW.  I can collect logs or data or a stack dump or no matter what... Let me know what will be useful information for the OR try to correct this.

  What happens if you rename NI\Shared\NI network Discovery\niDiscExp.dll network Discovery\niDiscExp.bak NI\Shared\NI and then restart the wizard?

• Memory speed (BIOS) running

  2 sticks of memory installed on my HP Pavilion (model #: p6605f) are: 2RX8 PC3-10600U-09-10-B0 (M378B5673FH0-CH9) that makes them a 1333 Mhz memory... BUT when I run the HP Support Assistant, he says:

  4 GB installed memory

  1: 2 GB 800 Mhz Samsung other DIMM Slot

  Slot 2: other DIMM 800 Mhz Samsung 2 GB

  Why my memory runs at 800 Mhz , when supposedly he can run up to 1333 Mhz ?

  Is this a BIOS setting? (I don't see anything in the BIOS that would allow me to control the speed of the memory)

  The BIOS on the PC says:

  Installed memory: 4096 MB/PC3-6400

  1: 2048 MB DDR3 SDRAM memory bank

  Memory Bank 2: 2048 MB DDR3 SDRAM

  BIOS version: 6.05 12/08/10

  Basic version: 08.00.15

  Thanks for any help.

  The reason why he turns to this speed is because the primary and secondary memory timings have been preset in the BIOS file for optimal value that was determined by HP engineers.  You can change this, but it would violate your warranty and require that you Flash a BIOS hack on your desktop-card mother s.

  A module of memory will be a SPD table encoded in its firmware, which tells a BIOS what timings should be used at speeds of different buses.

  To display SPD settings available for your modules you can download and run the utility CPU-z.

  HP, Dell and Sony and other OEM computer manufacturers set the BIOS so it cannot be easily modified. 'S done it for a simple reason, although some might find offensive. This is to protect consumers from themselves and to ensure that their products continue to function reliably. Most of the people looking at the BIOS settings available in my gaming system (an ASUS ROG Crosshair IV) and say "it's a bunch of settings" (or worse! ). The industry feels and probably rightly, that the average PC/computer laptop/touchpad user didn't just need to be able to screw up their PC with just a few keystrokes.

• Compaq Presario 2545US upgrade (DC970A) CPU, compatible CPU?

  I have a HP Pavilion nx9010 (DV134U) for parts for my Compaq Presario 2545US (DC970A). It's practically a twin, internal differences only being their mothers and processor cards. The Presario's 31KT9MB0030 system board and CPU Pentium 4 d 2.40 GHz (SL6RZ). The Pavilion has 31KT9MB0056 system board and CPU Pentium 4 d 2.80 GHz (SL6PF). My question is whether I would be able to run the nx9010 CPU in the 2545US without a critical thermal problems. They both have the same 3-fan and heatsink of huge heat cooling system.

  Any help, advice and information would be greatly appreciated. Thanks in advance.

  According to some old posts here by Clinton Tam, it seems that the Presario will work until a 2.80 GHz CPU P4 - D. In the manual, in the list of replaceable parts, it was available with other processors P4 - D. I saw no motive P4s. In the list of spare parts on the HP Business Support site for the nx9010, it was available with several processors P4 - D, not the P4s Mobile only. The difference is in the motherboards. The motherboard in the 31KT9MB0030 Presario 2545US (326682-001) and those in the Pavilion nx9010 is 31KT9MB0056 (344178 001). 30 is not the voltage regulator / VRM necessary for the performance of a portability, or Mobile P4. 56 the fact. Thus, the Presario I can only run the P4 - D processors and the nx9010 that I can run simultaneously P4 - D and M - P4 CPU.

• Why the CPU frequency will be just said to 1189 MHz when the X 230 had AC power ONLY (battery removed)?

  Dear all,

  I bought a X 230 (i7) laptop.  I found that has removed the battery from the laptop and use only the power supply with the X 230 Notenook.  The CPU frequency will said to 1189 MHz.  It will not change no matter how the laptop program is running.  The CPU frequency will increase to 2.9 GHz or up to Turbo when the laptop with battery or battery and AC power.  Why the CPU frequency will be just said to 1189 MHz when the X 230 had AC power ONLY (battery removed)?  This is not good.  No matter which setting in X 230 Notebook need to change?  Help, please.

  Welcome to the forum!

  What you feel is the factory default setting. You may or may not be able to get around using an adapter 90 w instead of a 65W one, but I've generally not recommended to use the ThinkPads without a pile of work.

• on my ap cpu used

  Hi all

  I have a question about the rate of cpu used, my ap has high computer function, as jpeg encode and decode seconds, and when he's throwing for awhile time, the CPU rate used for my ap is superior and superior and then she reach up to 100% result in the user interface is more slower. Is there a solution that could solve this problem? or no matter what concept, I know.

  The issue you describe is not really possible on a BlackBerry.  As a multitasking operating system, it will run quite happily CPU intensive workloads in the background while maintaining good performance of the user interface for the user.

  If your treatment is an impact on the user, it is certainly because you run the processing on the thread of events, you should avoid.

  I think that this article will be useful:

  http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

• No 100 Mbps with cisco 892 router, cpu caps

  Hello

  We have a connection internet-based corporate (100 Mbit/s down, 10 Mbps upward, certain guarantees) with eight fixed ip addresses (in the a.79 configuration.72.  To join our network to the internet, we use a router 892.

  I am new to cisco equipment, so I had some trouble getting things to work, but I arrived.

  Now, we are facing this problem of throttling: whenever we are using more about 60mbit/s down bandwidth, this router CPU is maxing out (98-99% with 'show processes cpu history').

  When I download a torrent (dvd debian) to 4 MB/s (or 48mbit/s) cpu running at about 46 percent (tops at 49%).  Stop the download of results in 14% at the top of the CPU usage.

  When you use the command 'See deals cpu sort', I get this:

  Maximilian #show process cpu sort

  CPU utilization for five seconds: 46% / 43%; 01:00 %; 05:00 %

  Process PID Runtime (ms) Invoked uSecs 5 Sec 1 Min 5 Min TTY

  82 35978164 10389766 3462 2.31% 2.08% 2.06% 0 COLLECT NECK STAT

  90 203264 266300211 0% 0.31 0.31% 0.28% Ethernet 0 Msec Ti

  31 664 844 786 0.31% 0.19% 0.08% 8 SSH process

  108 2039472 5100352 399 0.23% 0.34% 0.30% IP 0 comments

  334 35468 4269539 8 0.23% 0.09% 0.04% 0 IP NAT Ager

  324 21204 2077221 10 0.07% 0.03% 0.02% 0 jobs per second

  104 24240 64783802 0 0.07% 0.04% 0.02% 0 IPAM Manager

  336 7404 108003 68 0.07% 0.02% 0.00% 0 IP VFR proc

  33 66952 321851 208 0.07% 0.00% 0.00% ARP 0 comments

  9 0 2 0 0.00% 0.00% 0.00% 0 timers

  ...

  If the CPU usage is about 46%, so that no process uses actually more than 2.31%.  In addition, these numbers do not change if I stop the download.

  It's our configuration (with parts obscured):

  Maximilian #show run

  Building configuration...

  Current configuration: 8035 bytes

  !

  ! Last configuration change at 09:49:27 UTC Wednesday, May 30, 2012 by jan

  ! NVRAM config update at 13:55:40 UTC Tuesday, May 22, 2012 by jan

  ! NVRAM config update at 13:55:40 UTC Tuesday, May 22, 2012 by jan

  version 15.2

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  maximilian hostname

  !

  boot-start-marker

  Start the flash config: maxi-config

  boot-end-marker

  !

  !

  logging buffered 51200 warnings

  !

  No aaa new-model

  !

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-3260749506

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 3260749506

  revocation checking no

  rsakeypair TP-self-signed-3260749506

  !

  Crypto pki trustpoint tti

  crl revocation checking

  !

  !

  TP-self-signed-3260749506 crypto pki certificate chain

  certificate self-signed 01

  ........... [snip]...

  quit smoking

  encryption pki certificate chain tti

  !

  !

  !

  DHCP excluded-address IP 10.10.10.1

  IP dhcp excluded-address 192.168.1.0 192.168.1.49

  !

  CVO-IP dhcp pool pool

  import all

  Network 10.10.10.0 255.255.255.248

  default router 10.10.10.1

  Server DNS 8.8.8.8

  Rental 2 0

  !

  Maxi-pool of IP dhcp pool

  import all

  network 192.168.1.0 255.255.255.0

  default router 192.168.1.1

  Server DNS 8.8.8.8

  Infinite rental

  !

  !

  IP domain name adhese.org

  8.8.8.8 IP name-server

  inspect the IP name DEFAULT100 ftp

  inspect the IP h323 DEFAULT100 name

  inspect the IP icmp DEFAULT100 name

  inspect the IP name DEFAULT100 netshow

  inspect the IP rcmd DEFAULT100 name

  inspect the IP name DEFAULT100 realaudio

  inspect the name DEFAULT100 rtsp IP

  inspect the IP name DEFAULT100 esmtp

  inspect the IP name DEFAULT100 sqlnet

  inspect the name DEFAULT100 streamworks IP

  inspect the name DEFAULT100 tftp IP

  inspect the tcp IP DEFAULT100 name

  inspect the IP udp DEFAULT100 name

  inspect the name DEFAULT100 vdolive IP

  IP cef

  No ipv6 cef

  !

  !

  !

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  !

  !

  !

  !

  license udi pid CISCO892-K9 sn FC [snip]

  !

  !

  username secret privilege 15 cisco 5 [snip]

  username privilege 15 jan

  !

  !

  !

  !

  !

  property intellectual ssh pubkey-string

  jan username

  ssh - rsa [snip] jan@[snip key hash]

  quit smoking

  !

  !

  !

  !

  !

  !

  !

  !

  !

  interface BRI0

  no ip address

  encapsulation hdlc

  Shutdown

  Multidrop ISDN endpoint

  !

  interface FastEthernet0

  no ip address

  spanning tree portfast

  !

  interface FastEthernet1

  no ip address

  spanning tree portfast

  !

  interface FastEthernet2

  switchport access vlan 2

  no ip address

  spanning tree portfast

  !

  interface FastEthernet3

  no ip address

  spanning tree portfast

  !

  interface FastEthernet4

  no ip address

  spanning tree portfast

  !

  interface FastEthernet5

  no ip address

  spanning tree portfast

  !

  FastEthernet6 interface

  switchport access vlan 2

  no ip address

  spanning tree portfast

  !

  interface FastEthernet7

  switchport access vlan 2

  no ip address

  spanning tree portfast

  !

  interface FastEthernet8

  IP 192.168.3.2 255.255.255.0

  automatic duplex

  automatic speed

  !

  interface GigabitEthernet0

  [snip] 255.255.255.252.94 IP address

  IP access-group 101 in

  no ip redirection

  no ip unreachable

  no ip proxy-arp

  penetration of the IP stream

  NAT outside IP

  inspect the DEFAULT100 over IP

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  !

  interface Vlan1

  IP 10.10.10.1 255.255.255.248

  IP access-group 100 to

  IP nat inside

  IP virtual-reassembly in

  IP tcp adjust-mss 1452

  !

  interface Vlan2

  IP 192.168.1.1 255.255.255.0

  penetration of the IP stream

  IP nat inside

  IP virtual-reassembly in

  !

  IP forward-Protocol ND

  !

  IP fragment offset stream capture

  IP-length of stream capture package

  TTL for IP stream capture

  capture IP stream vlan id

  ICMP IP stream capture

  IP ip id stream capture

  IP stream capture mac addresses

  !

  IP http server

  23 class IP http access

  local IP http authentication

  IP http secure server

  IP http timeout policy slowed down 60 life 86400 request 10000

  IP nat pool system3-74 [snip].74 [snip].74 prefix length 29

  IP nat inside source list 74 pool system3-74 overload

  IP nat inside source static tcp 192.168.1.42 22 [snip] extensible 22.72

  IP nat inside source static udp 192.168.1.42 1194 [snip] extensible.72 1194

  IP nat inside source static tcp 192.168.1.42 22 [snip].72 extensible 1489

  IP route 0.0.0.0 0.0.0.0 [snip].93

  IP route 0.0.0.0 0.0.0.0 192.168.3.1 5

  IP route 10.8.0.0 255.255.255.0 192.168.1.42

  !

  access-list 1 permit 10.10.10.0 0.0.0.7

  access-list 23 allow 192.168.1.42

  access-list 23 allow 10.10.10.0 0.0.0.7

  access-list 74 allow 10.10.10.0 0.0.0.7

  access-list 74 permit 192.168.1.0 0.0.0.255

  access-list 100 deny ip 255.255.255.255 host everything

  access-list 100 deny ip 127.0.0.0 0.255.255.255 everything

  access ip-list 100 permit a whole

  access-list 101 deny ip 10.0.0.0 0.255.255.255 everything

  access-list 101 deny ip 172.16.0.0 0.15.255.255 all

  access-list 101 deny ip 192.168.0.0 0.0.255.255 everything

  access-list 101 deny ip 127.0.0.0 0.255.255.255 everything

  access-list 101 deny ip 255.255.255.255 host everything

  access-list 101 permit tcp any host [snip].72 eq 1489

  access-list 101 permit tcp any host [snip].72 eq 22

  access-list 101 permit udp any host [snip].72 eq 1194

  access-list 199 deny ip any host 74.209.133.138

  access ip-list 199 permit a whole

  not run cdp

  !

  !

  !

  !

  !

  SNMP-server [snip] RO community

  !

  control plan

  !

  !

  !

  !

  profile MGCP default

  !

  !

  !

  !

  exec banner ^ C

  % Warning of password expiration.

  -----------------------------------------------------------------------

  Virtual office of Cisco (CVO) is installed on this device and it provides the

  default name "cisco".

  It is strongly recommended that you create a new user name with a privilege level

  15 using the following command.

  username secret privilege 15 0

  Replace and with the username and password you want

  use.

  -----------------------------------------------------------------------

  ^ C

  connection of the banner ^ C

  -----------------------------------------------------------------------

  Virtual office of Cisco (CVO) is installed on this device and it provides the

  default name "cisco".

  It is strongly recommended that you create a new user name with a privilege level

  15 using the following command.

  username secret privilege 15 0

  Replace and with the username and password you want

  use.

  For more information about CVO, please go to http://www.cisco.com/go/cvo

  -----------------------------------------------------------------------

  ^ C

  !

  Line con 0

  local connection

  line to 0

  line vty 0 4

  access-class 23 in

  local connection

  length 0

  transport input telnet ssh

  line vty 5 15

  access-class 23 in

  privilege level 15

  local connection

  transport input telnet ssh

  !

  end

  Please tell me what I can do about it.  Or this router is not able to do 100 Mbps?

  The net effect of running out of CPU is random connections abandonment and no possible communication with the router.  I could cap the bandwidth 90mbit/s or 80mbit/s, but I'd rather not.

  The system of image files is: "flash: c890-universalk9 - mz.152 - 1.T1.bin.

  Thanks in advance!

  Jan.

  Disclaimer

  The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose.  Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.

  RESPONSIBILITY

  Any author will be responsible for any damage that it (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.

  Poster

  In fact, the 890 series is rated at 100 Kpps, i.e. approximately 51 Mbit/s (noted also in other posts) for minimum size Ethernet packets, but Cisco also documents the 890 providing up to 1 400 Mbit / s 1500 bytes of the packets of size.  Unfortunately "your mileage may vary." i.e. actual throughput is very dependent on your particular traffic and you configure your router to do against this traffic.  For example, you have NAT/PAT, ACLs, firewall inspection and NetFlow, all who consume extra CPU during the processing of packages of the interface.

  Not knowing what exactly will a customer with a router, Cisco makes recommendations to use very conservative, and for the 890, it recommends side WAN does not exceed 15 Mbps (duplex).  Again, it is very conservative, and as you have discovered, your configuration hit the wall about two times this recommendation, although it is unfortunately not enough to manage your bandwidth capacity.

  As other posters have noted, long-term or preferred solution is probably getting and using a faster router.  You can probably get out a title plus your 892 with additional 'tuning '.  That is, by eliminating all what you really, really need and do what you need as efficiently as possible.  For example, disabling NetFlow (such as already mentioned in some of the messages), disabling the firewall dynamic as you have NAT/PAT and ACL; and the "Resequencing" (if it is logically possible) ACEs.

  Regarding your question of the use of the services of police or release in the form, to avoid any overrun of the CPU (which really want to avoid!), Yes, something can be done there and could be very beneficial, but you will use some CPU for that and a really intelligent approach would be complicated.  (An example of 'smart' approach would be a built-in script that queries CPU frequently or traps these slow flows on high CPU, which then finds the high flows and policies dynamically.  A not-so-smart approach would be one policeman static for all incoming traffic, or only certain types of traffic entering the police.)

• Oracle Database Sizing CPU

  Hi all

  Our production database is running on 12 CPU cores. Based on the "sar" report CPU utilization, we noticed this always above 90% idle CPU time and some time (for backup), he arrived nearly 70%. (This means that its use is of about ~ 30 to 40%). O ifyour team has decided to migrate this database to 6 core CPU in order to reduce the cost of license and server cost.

  Please suggest it will be good to migrate the database to 6 CPU cores?

  Can anyone please share me measures documents to capture the database, the CPU usage and also please share all documents on the sizing of the CPU/hardware of oracle database.

  Our database current as below, server details

  Model of processor - Intel Xeon processor X 5650 @ 2.67 GHz (server - Dell PowerEdge M820)
  

  Total number CPU = 24 (active multithreading)

  Total number of cores - 12, 2 physical cores CPU.i.e 2 * 6

  RAM - 64 GB

  Details of the database

  Version - 11.2.0.1 (NO CARS)

  Size - 400GO

  Users - 300 users (150 concurrent users).

  Let me know if you need more information on this.

  Thank you

  If you have Enterprise Edition licenses, you can test the effect on your current platform by enabling the instance caging. It is a low risk.

  --

  John Watson

  Oracle Certified Master s/n