Before the controls Panel reset each VI run.

Similar Questions

• How to: using the same control panel for several vi and reproducing change to the control panel.

  I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

  All controls in the control panel are in a bundle, so all values are passed to 1 thread.

  I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

  I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

  Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

  Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

  Have fun

  Ben

• Try to run programs .exe produces the error message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  Hi all

  Help needed please.

  HP dx2250 microtower, running Windows Vista Home Basic Edition, recently attacked by Vista Antispyware 2010. Norton 360 V3 dealt with rather late the virus, but the fall of the remains.

  I am unable to open any .exe file (program) on the desktop, start menu, or through the browser. I can access the programs in opening a data file, for example, double-click a .doc file opens MS Word, etc.

  The error message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I tried an automated solution that is available via the forums (exefix_cu.reg) and also a manual suggestion to change the registry, also available through the forum.

  I also splashed by and purchased Regcure, who seems to have done no difference despite who claims to have removed 1500 odd errors. So I'll be request the refund on that one.

  I scanned the forums and found a large number of similar problems, but not one that is as complete as this.

  Any help much appreciated

  Hi all

  Thanks to anyone who has seen this link and made suggestions.

  I was looking at a similar, and is other problems came up with this very useful link, I am grateful to say has solved the problem.

  Sorry MapDrummer, but I'm not sure if it works for XP

  Follow this link to SpiritX who has the answer

  Hi Justalilkink,

  See also the post made by SpiritX on January 24, 2010 17:32 in the link http://social.answers.microsoft.com/Forums/en/vistafiles/thread/086ab3bb-d764-4fb1-a6f3-205bff708e63

  Thank you very much

• the touchpad tab is missing from the control panel can be restored on vostor 1700 running xp

  To turn off the touchpad on my laptop Dell Vostro 1700 under XP, but the touchpad tab is missing when I opened the control panel mouse icon

  http://www.Dell.com/support/drivers/us/en/19/driverdetails?DriverID=XV8FK

  This is your driver for the touchpad, it should be located in the dell folder, do a search on your pc for

  R165804.exe

  and check that you have the folder options to show hidden files and not to hide system files.

  Normally, it showed as icon in the control panel?

• I can't get rid of Highlightly even though I disabled in the extensions and uninstalled in the control panel. (windows 7 pro)

  Highlightly does not appear in the control panel more since I uninstalled it. I disabled the extension in the Add-ons. He however keeps popping up. I have windows 7 pro 64-bit.

  Is there an action actually uninstall Highlightly your list of extensions instead of disable?

  One thing I would recommend is that make you a Reset of Firefox. The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  To be sure that he's gone completely, make a check of malware with some malicious programs, analysis of the programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• I want to uninstall real player. I went to the control panel to uninstall, but it was not listed.

  Original title: real player not on the list of programs but still doesn't work

  I want to uninstall real player. I went to the control panel to uninstall, but it was listed.  I can always download with real player. What's new? Why is not listed if I can get rid of him.

  Hello

  What operating system are you using on your computer?

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  a. click Startand then click run.

  (b) in the Open box, type regedt32, and then click OK.

  c. in the registry editor, find the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall

  d. in the left pane, click the Uninstall registry key, and then click export on the file menu.

  e. in the export registry file dialog box that appears, click desktop in the list record in , type Uninstall in the file name box, and then click Save.

  f. each key listed under Uninstall in the left pane of Registry Editor represents a program that is displayed in the list of currently installed programs in the add tool / remove programs. To determine which program that represents each key, click the key and discovers the following values in the details on the right pane:

  Full name: the Display Name key value data the name listed in Add / Remove programs.

  - and -

  UninstallString: The value of the UninstallString key data the program used to uninstall the program.

  g. After you identify the registry key that represents the program that you removed but which is still displayed in the currently installed programs list of add or remove programs, right-click the key in the left of the registry editor window pane and then click Remove.

  Click Yes in response to the message "are you sure you want to delete this key and all of its subkeys?

  h. on the file menu, click Exit to quit the registry editor.

  i. click Start, click Control Paneland then click on Add / Remove Programs.

  In the currently installed programs list, verify that the program whose registry key you deleted is no longer listed.

  j. do one of the following:

  o If the program list is not correct in Add / Remove Programs, double-click the file Uninstall.reg that you saved on your desktop in step 5 to restore the original list of programs in the registry.

  -or-

  o If the program list is correct in Add / Remove Programs, right-click the Uninstall.reg file on your desktop and then click Remove.

  For more information, you can check the link below:

  http://support.Microsoft.com/kb/314481

• cannot open the mouse settings in the control panel after the update

  Ideate:

  • Program som har problem med
  • Felmeddelanden
  • Latest changes to the din dator gjort
  • The redan har forsokt att atgarda problemet VAD

  KOM Ihag - Det har ett offentligt forum sa aldrig skicka privat information såsom ar epost eller telephone!

  Hi image,

  Welcome to the Microsoft Answers community.

  a. what exactly happens when you try to open the mouse settings in the control panel?

  b. do you receive any error messages?

  I suggest that you want to run System Restore on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Power options in the control panel are empty - can't do anything.

  Recently, I noticed that the Power Options in the control panel is empty.  I can't create something or do something there.  Could something in Services.msc have disabled this?  Nowhere part that I should look at?  I cannot stop, restart, or put it to sleep.  Also when I start the computer (once using the hardware Reset button on the computer case) he does not remember my user name.  He asks me every time.  There is no password.  I just press ENTER after entering my user name.

  So I found the magic formula to use the command run and it resets everything back to normal.  Can't find it now but if you google it you can find.  You want to reset the Power Options in the control panel.

  His time, I have contributed something here!  I'm always ask questions and rarely give all the answers.  :)

• Error: could not find everything in trying to access Add / Remove programs in the control panel

  Title: cannot open Add/Remove programs in the control panel

  When I try to open Add/Remove programs in the Control Panel, I get a message that it can not be found.  What should I do to repair this?

  Hello

   
  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you to follow the steps and check if the problem persists.
  (a) click on Start, run, type cmd and press enter.
  (b) in the command prompt, run these commands:
  regsvr32 Jscript.dll
  regsvr32 Msi.dll
  regsvr32 Oledb32.dll.
  regsvr32 Msado15.dll.
  regsvr32 Mshtmled.dll
  
  For reference:
  Control Panel not responding in Windows XP
  http://support.Microsoft.com/kb/843551
   
  Method 2: If the problem persists, I suggest that allowing you to run the system (CFS) files Checker scan to fix corrupt files.
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3: An analysis using the Microsoft safety scanner.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps.

• An error occurred while Windows was working with the Control Panel file C:\WINDOWS\system32\ALSNDMGR. CPL.

  Title:C:\Windows\System32\ALSNDMGR. Original CPL.

  Running Windows XP PRO this message "an error occurred while Windows was working with the Control Panel file.

  C:\WINDOWS\system32\ALSNDMGR.cpl.

  Can I re-enstall or the download file?

  Hello

   

   

  1. Once you get the error message?

  2. What is the card its installed on the computer? E.g. Realtek

  3. do you have a cleaning registry registry booster software installed on the computer or third party?

  4. are you able to play sounds on the computer?

  5. have you done any software or hardware changes on your computer before this problem?

   

  Alsndmgr.cpl made reference to the Manager his control panel Realtek Semiconductor AC97 file.

   

  If you have the card Realtek sound on your computer, try the following steps

   

  Method 1:

   

   

  If you have your CD of the sound card, I suggest to uninstall the card drivers sound sound card support applications and reinstall them.

  Reference:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  See also:

  http://support.Microsoft.com/kb/307895

  Method 2:

   

  You can still download the drivers from the Realtek or the sound card manufacturer's Web site.

  http://www.Realtek.com.tw/

   

   

  Hope the information is useful.

  Thank you for the help, I downloaded the 97 Realteck PGM. He cured the issue.

• Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  original title: missing file

  Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  I tried to start - run with my c/d operating system

  I checked for viruses

  I purchase software to remove etc and REG files.

  Now that the devil do?

  Thank you

  If this

  I tried to start - run with my c/d operating system

  means that you have tried to use sfc/scannow from start > run, your experience is not surprising.  This 'solution' is often suggested by people who don't really understand what this command does.  It does not help to restore a missing rundll32.exe file.

  For what is

  I checked for viruses

  What is the name and version of your anti-virus application?  When (approximately) their subscription expires? What other antimalware applications installed?  What other antimalware applications you used recently to scan your computer?

  If you have not yet used the "software to remove the REG files and etc." return for refund or throw it out.  "Registry cleaners", 'tuners', etc. are not useful.  If you used to "clean" the registry, use its "undo" feature (if it has one) to restore the registry.  Longtime MS MVP PA Bear:

  TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  What probably happened is that your antivirus application deleted or quarantined in your file rundll32.exe thinking he was infected.  He could have, but probably not.  In any case, read the post that begins, "That 'solution' is not on my list." in the following thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/systemrundllexe-not-found/6e30aff2-a88e-4d86-a654-753d54f632d1 you can also read the rest of the posts in this thread.

  Note that c:\windows\system32\dllcache is a hidden folder, but you who type in the address bar of Windows Explorer (or copy and paste), the folder should open anyway.

  Assuming you manage to restore rundll32.exe, download, install, update and run full scans (not at the same time) with each of the following free tools.

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• I get the error of Windows Explorer tries to use the Control Panel Applets

  Whenever I have open Control Panel, and then select an applet (Folder Options), I get an error for Windows Explorer and everything is frozen until I have completed the task with the Task Manager.  I am running XP Home Edition with Service Pack 3.  Have passed through each .cpl file by placing each of them, one at a time in a temporary folder and then try the control panel again.  I always have the error and cannot detect what applet file could be causing it.  Any help is appreciated.

  You must run a full on your antivirus scan, until the Trojan horse is completely removed.

  Try to access the folder in this way options:

  Start > my computer > in the top menu, click Tools > choose folder at the bottom of the menu options.

  Also run the eset online scanner on.

  Once the infection has been cleared, you should be able to go into folder options without freezing the pc.

  If you were able to enter the folder through the above method options and let us know if the Trojan horse has been completely deleted.

• How can I turn off indexing of the control panel. I tried, but failed. I need instructions step by step please

  I want to disable indexing of my computer via the control panel... I tried, but failed.  Can someone give me a route step by step on how I disable indexing with the control panel function?

  Open Add/Remove Programs, locate & open Add/Remove windows components"."

  Locate & uncheck "indexing service", close when thru.

  In addition, we can go to run, type: services.msc

  MSC, highlight indexing, double-click, reset the properties to "disable,"

  'manual' or 'auto', firm when thru.

• After download of Internet Explorer 8 I can't open all the icons in the control panel. On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Dear Sir/Madam,

  Yesterday, I downloaded Microsoft Internet Explorer 8 web from Microsoft Download Center.

  After downloading Microsoft Internet Explorer 8, I can't open any icons in the control panel.

  On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Help, please. Thanks Gene.

  Thanks Gene.

  Dear: :

  Running sfc/scannow will not replace the missing rundll32.exe file.

  Why you post methods that do not work and will be just wasting time?

  Hove you never even seen this problem before, tried to recreate it so that you can actually see, or have you never really fixed?

  Why you learn not what sfc/scannow does and does not do?

  Here is a simple test to you and all your colleagues in the technical support engineer:

  Rename or delete just your c:\windows\system32\rundll32.exe file is "missing".

  Rename rundll32.exe---> rundll32.xxx

  If you started normally, before you can blink, the 'missing' rundll32.exe file quickly and quietly replace the copy in the dllcache folder.  It is the Protection of Windows file in action and you will see something like this in the Event Viewer log system:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\rundll32.exe. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5512.

  I beg you to perform this simple test to know how the sfc/scannow:

  Boot your system to Safe Mode or the recovery for the Windows File Protection Console does not run.

  For this example, we will use the system critical file rundll32.exe.

  Rename or delete your c:\windows\system32\rundll32.exe.exe file so the file is now "missing."

  A critical file, is it true?  It is on the list of the file 3498 knows the Protection of Windows and SFC files, but now he isn't.

  If Windows File Protection is running, the "missing" file would be quickly and silently replaced (try to rename or delete it in normal mode and it will be quickly and quietly replaced).

  Now, with your file rundll32.exe missing, start in Normal mode and try to use something like control panel to open something like Power Options and you'll see that familiar message:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.

  Now you have recreated a common problem with the missing file and seen the error of our own eyes.  A Microsoft Support Engineer will usually suggest running sfc/scannow for this kind of problem, but it will not work or help and you can prove it to yourself, and now you have reproduced the error.

  You follow own advice and run sfc/scannow to the end.

  The rundll32.exe is always had disappeared, right?  Did run sfc/scannow replace the missing critical system file?

  How can he be so sfc/scannow is supposed to replace the missing system files?  This is because it is not this that sfc/scannow does.

  Now you know sfc/scannow does not.  He did not replace your missing system file (don't forget to put your rundll32.exe back so you will have a).

  Now, go to c:\windows\system32\dllcache and delete or rename the file rundll32.exe from there - and it will be gone and not replaced automatically because the Windows File Protection does not seem after this record.

  Run sfc/scannow in full again.

  Replace the file rundll32.exe missing in the dllcache folder, since it handles missing files (not the system32 folder) IS the folder that sfc/scannow.

  Now you know sfc/scannow does.

  Do you need help to know too much about the corrupt system files?

  Since most people do not have a genuine XP bootable installation CD, they will not be able to develop a copy of the file that is missing from the installation CD, they have not.

  After some directions on how to replace the file when the user has no XP bootable installation CD authentic and that will be useful to all.

  If you don't know how to say "I don't know how" and I'll help you.

  You want to inform/warn the poster that SP3 is installed that running sfc/scannow will take a long time for the installation of SP3 CD?

  If you do not have a CD with the same Service Pack as your installation (most people don't), the posters are in for a rough and frustrating time.

  Of course this will help with the detachment of the Ministry of Education of the impossible to try things that don't work, but I thought I'd throw it out there for the 100th time.

• HP plotter designjet 510 appears as ready in the control panel, but is not drawn. Plotter is shown connected to USB003. Any ideas?

  I am running windows vista 64-bit. I also have downlaoded and installed service pack 1 or 2 - I forgot. But now, even though I see the tracer in the control panel---> windows printer as "ready", I can't draw anything. The abacus is silent. When I click on the print status (the little icon on the bottom right of the screen), it displays the status of trace as error.

  Any ideas?

  Hi Moussa,.

  Thanks for posting your query in Microsoft Community.

  According to the description, you are facing problems with printing through HP Plotter DesignJet 510 and receive the status of tracing as error. To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit article and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: If the method above does not help then you can follow the steps in the HP tool specially for HP devices.

  Try the HP Print and Scan Doctor

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Alternatively, you can contact HP Support for help on the issue:

   

  HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope this information helps.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.