BEFSR41. Run the wizzard of configuration to connect to Inet
I bought a Linksys BEFSR41a a few days basck, since my old D-Link became a little a little reliable.
1. connect inside and follow the steps described in the living part, guide to start, but could not connect to the Internet.
2. check the network card with ipconfig-all the and he had acquired an ip address and everything seemed normal.
3. check the router configuration and status via the web interface. It seemed as well, at least as far as I could tell (compared with my old D-Link settings).
4 power everything, including the modem, router, switch and PCs and restarted.
5. I tried runing the wizzard of configuration included on the disc that came with the router instead of folowing guide quick start.
6 here, now I could connect to the Internet... for a while
The problem I have now is that whenever I have turn off the modem + router, as I do every night, I have to run the wizzard of configuration to make it work again the next day. And no, leaving on is not an option! It is a real pain in the * beep * and I'm close to throwing away the new router. What did the wizzard to works and why is he not saved in the configuration of the router?
I have a cable connection and my PC is running Win XP. I hope someone can help
Hi TheMOOSE and welcome to the forums!
Since you have a cable connection, it is advisable that when you turn on your device, do it in the right order. It still works for me. It should be the first modem, then the router and your computer.
There is no need to run the wizard to set up everytime, because the router is already set.
Tags: Linksys Routers
Similar Questions
-
Hi, I'm new to the development of Blackberry, I read everything on the application running at startup and have a different point of entry for this application. I still need help with my application
I use BB JDE 4.7
Simulator: BB 9530 4.7.0
I'm developing an application of SMS. (extends UiApplication)
1) there is a thread that listens for incoming messages
2) there is a wire which is a SMS sender
3) there is a main screen and two full screens. for example, when the user clicks a button in one of the screens full... I send you a message
(4) when a message is received, based on the content of the message I push either a full screen
(5) I have, all the wires and screens as the class internal to the main class that extends from the UiApplication.
I got the basic features. I need help making that demand the application of autostartup
(1) I need to start listening to the sms thread when the BB phone starts
(2) I need to have the application icon in the applications screen as another entry point for the application (only for the GUI), and the listening thread must remain active in the background.
(3) when an incoming message is detected, the application GUI should be brought to the foreground (if it isn't already forground) after posting a popup (instead of bring the application to the foreground, is it better to display a flashing icon in the status bar of the home screen blackberry and perhaps global popup)
(4) when the GUI of the application part is closed, I need to stop the sms sending thread, and when the system shuts down, I need to stop the listening thread.
Please help me guys... I have read many articles and discussions regarding the automatic start-up of applications, another point of entry, the # of background threads...
but I couldn't find how to implement my needs.
(1) should I need to create two different projects (applications [GUI thread, a sender] and one for the listening thread)? or I can achieve in single application?
(2) should I have to sign in the background thread to the GUI app? If so, how?
(3) it is necessary to use the RunTimeStore object? If so, I don't know how I can bring to the foreground the application GUI of the background thread.
(4) if I have to stop the thread of listening by overiding onExit() method, the important question I have is, if the onExit() method is only for applications that extends from the Application class and not for the UiApplication class?
(5) if I should have two projects (one main and the other as a spare point entry), which project should I do as "autorun at startup" and a "system module".
As I need to have the background still running thread when the GUI application is active. I don't know how I do.
Hello world...
I reached my needs thanks to a single application. I used an other entry point.
To refer to chk my other post
-
How to configure Task Scheduler to run the program when the connection is established
Windows 7 64 bit
Dial-up Internet accessI want to use the Windows 7 Task Scheduler to run a program IMMEDIATELY AFTER a dial-up connection is made to the internet.
How can I configure the Task Scheduler in Windows 7 to do this, please?
I am familiar with the Scheduler of tasks with the command line parameters. Any help is appreciated.
Thank you
FYI: If an example is needed, Microsoft Security Essentials can be configured to update virus through this path with the argument definitions:
C:\Program Files\Microsoft Security Essentials/MpCmdRun.exe SignatureUpdate
Maybe someone can use it to show how to configure the Windows 7 Task Scheduler to update MSE virus definitions, once the connection dial-up was made?
Otherwise, for example, another program to run once established a dial-up connection would be OK, thanks
Hello
Scheduler of tasks is time driven.
For order-driven event, you need a script.
Question like that is much better treated in the TechNet IT Pro Forums.
My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.
http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
I uninstalled the software so I could start over. Configuration Wizzard is locked and I can not understand how to get unlock.
Hi @bobbalou,
Thank you for visiting the Forums of HP Support for a solution to your printer problem.
I understand that you replaced your modem and router, but could not connect your HP Officejet Pro 8600 e-all-in-one printer to the new network, because the wireless configuration wizard is locked. I would like to help with that.
Try to restore the default network before attempting to run the Wireless Setup Wizard.
1. on the touch screen of the printer, press the right arrow to display the second navigation screen.
2. press on the installation program icon.
3. tap network, then press the default network.
If you are able to restore the default settings of the network is should allow you to run the Wireless Setup Wizard.
If you're locked up because he had a password set in place on the printer, you will need the password to access the server (EWS) of embedded printer online web to change the settings of the printer.
Please let me know if that solves the problem, or if you need assistance. -
My desktop computer has ceased to send/receive emails after some problems with the software of advertising on Firefox.
My laptop is running the same t/bird & Firefox via a wireless router and receives the same accounts of electronic mail without any problems. I checked the configuration of one against the other and can find no difference, even if the port numbers had been changed from 110 to 995. I reset to 110 through the "safety of the connection. T/bird reboot and the computer makes no difference. S/E is "mail.aapt.net.au:110." I quadruple checked all without success. This problem may be due to 'selection of ads' or cousins. If so how can I get rid of them. I tried all of the fixes recommended, but none seems not to work. More than Adeblock seems to have stopped the adds on FireFox.
Sorry it's so long, but I wanted to give you the full story.Hi Matt.
It is fixed.
After much checking files, creating new profiles and modified to accommodate all the original emails, addresses, filters etc etc. I finally got it working. Many of the entries in the "prefs.js" had been changed, POP3, imap, but also many other variants. I can't that assume this was done by some obscure piece of software, but I guess I'll never know.
Thanks a lot for your help and your suggestions. While they do not solve the problem they certainly put me on the right track.
Best regards
John Sharples -
Hello
I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.Any suggestions?original title: connectivity LimetedThe zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.
Your messages are a bit terse, but if I understand correctly
- You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
- All but one of these computers can reach successfully from the Internet via the router.
- A computer that can't browse the Internet is connected to the router via an Ethernet cable.
- You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
- You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
- You have installed Windows XP Service Pack 3 (or at least Service Pack 2)
Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:
Open a command prompt window (start > run > cmd > OK)
Type the following lines and press ENTER after each lineNetsh reset winsock catalog
netsh int ip reset c:\resetlog.txtClose the command prompt window and restart the computer.
-
original title: WiFi
I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!
Hi AshleyHenley,
- Did you the latest changes on the computer?
- When was the last time it was working fine?
- You have security software installed on the computer?
See the article and run the Fixit tool available, check if it helps.
Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
http://support.Microsoft.com/kb/871122
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
original title: WiFi
I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.
I use a Huawei E585. I simply want to clamp it alll in the tray.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
(1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).
(2) START, CONNECT, WIRELESS INTERNET CONNECTION
--> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~! (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;
--> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network
3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)
-
the computer is configured to automatically run programs at startup detected
I have windows 7... computer running very slow when I start the pc, or even to open internet programs... don't have a full scan virus no nothing...
When I check the performance he said: convenience store has made some changes to your system.try to try the task you were trying to
do before.
and she said then in a pox: problems
the computer is configured to automatically start detectet and a yellow triangle with an exclamation point
could you please tell me how solve the problem... thank you so much manual
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Peformance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
RC-50014: Fatal: failed to run the auto configuration service
Hi all
We are cloning Oracle 11i production applications. It is a 3-tier application that DB is hosted on a node, simultaneously on other applications on 3rd node.
The database has cloned successfully during the operation of the adconfig to the node at the same time we are facing problem.
We get below error.
RC-50014: Fatal: failed to run the auto configuration service
script gave:
****************************************************igccmprf.sh started at Wed Jan 28 03:27:44 CST 2014
The environment settings are...ORACLE_HOME: /phdfci/oracle/phdfciora/8.0.6
ORACLE_SID:
TWO_TASK: PHDFCI
Path: /phdfci/oracle/phdfciora/iAS/Apache/perl/bin:/phdfci/oracle/phdfciora/8.0.6/bin:/phdfci/oracle/phdfciappl/fnd/11.5.0/bin:/phdfci
/Oracle/phdfciappl/ad/11.5.0/bin:/usr/java14/bin:/phdfci/Oracle/phdfcicomn/util/unzip/unzip::/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/bin:/usr/ccs/bin
: / usr/sbin: / phdfci/oracle/phdfcicomn/clone/bin /... /JRE/JRE/bin:/phdfci/Oracle/phdfciora/IAS/apache/perl/bin:/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/ja
VA14/bin:/phdfci/Oracle/phdfcicomn/util/unzip/unzip:/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/java14_64/bin:/usr/VAC/bi
n: / usr/bin: / etc: / usr/sbin: / usr/ucb: / home/apchdfci/bin: / usr/bin / X 11: / sbin:
LD_LIBRARY_PATH: /phdfci/oracle/phdfciora/8.0.6/network/jre11/lib/aix/native_threads:/phdfci/oracle/phdfciappl/cz/11.5.0/bin:/phdfci/oracle/phdfc
IOra/8.0.6/lib:/usr/DT/lib:/usr/openwin/libExecutable: /phdfci/oracle/phdfciora/8.0.6/bin/sqlplus
SQL * more: version 8.0.6.0.0 - Production on Tue Jan 28 03:27:45 2014(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter the value 1: enter the value 2: enter the value 3: enter the value of 4: connected.
Cannot create a hold file.
Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
igccmprf.sh out with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
The o/s message: no such file or directory.end err out.
****************************************************
Product Top pilots executed: AD_TOP FND_TOP ICX_TOP IEO_TOP ABM_TOP ECX_TOP BIS_TOP GL_TOP AMS_TOP CCT_TOP WSH_TOP CLN_TOP OKE_TOP OKL
_TOP OKS_TOP CSF_TOP XNC_TOP IGS_TOP IBY_TOP PA_TOP JTF_TOP MWA_TOP CN_TOP CSI_TOP WIP_TOP CSE_TOP EAM_TOP IMT_TOP FTE_TOP ONT_TOP HAS
R_TOP AHL_TOP OZF_TOP IES_TOP CSD_TOP IGC_TOP
[AutoConfig error report]
The following report lists the errors autoconfig met in each
execution phase. Errors are grouped by directory and by phase.
The format of the report is:
< file name > < phase > < eventually return code >[INSTALLATION STAGE]
AutoConfig could not successfully run the following scripts:
Directory: / phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
adgendbc.sh INSTE8_SETUP 1afcpnode.sh INSTE8_SETUP 1
txkWfClone.sh INSTALL_SETUP 1[PROFILE PHASE]
AutoConfig could not successfully run the following scripts:
Directory: / phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
adadmprf.sh INSTE8_PRF 1
afadmprf.sh INSTE8_PRF 1
afcpgsm.sh INSTE8_PRF 1
ahladmprf.sh INSTE8_PRF 1
amscmprf.sh INSTE8_PRF 1
aradmprf.sh INSTE8_PRF 1
clnadmprf.sh INSTE8_PRF 1
cnadmprf.sh INSTE8_PRF 1
cncmprf.sh INSTE8_PRF 1
csdadmprf.sh INSTE8_PRF 1
cseadmprf.sh INSTE8_PRF 1
csfagprf.sh INSTE8_PRF 1
csiadmprf.sh INSTE8_PRF 1
eamadmprf.sh INSTE8_PRF 1
fteadmprf.sh INSTE8_PRF 1
gladmprf.sh INSTE8_PRF 1
igccmprf.sh INSTE8_PRF 1
jtfadmprf.sh INSTE8_PRF 1
okeadmprf.sh INSTE8_PRF 1
okladmprf.sh INSTE8_PRF 1
ontadmprf.sh INSTE8_PRF 1
paadmprf.sh INSTE8_PRF 1
txkJavaMailerCfg.sh INSTE8_PRF 1
txkWebServicescfg.sh INSTE8_PRF 1
wipadmprf.sh INSTE8_PRF 1
wshadmprf.sh INSTE8_PRF 1
xnccmprf.sh INSTE8_PRF 1[APPLY PHASE]
AutoConfig could not successfully run the following scripts:
Directory: / phdfci/oracle/phdfciora/iAS/Apache/perl/bin/perl-I /phdfci/oracle/phdfciora/iAS/Apache/perl/lib/5.00503-I/phdfci/oracle/phdfciora.
iAS/Apache/perl/lib/site_perl/5.005-je /phdfci/oracle/phdfciappl/au/11.5.0/perl/phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
adadmat.pl INSTE8_APPLY 1
adupdlobs.pl INSTE8_APPLY 1
Fate of 32 stateful auto-configurationRC-50014: Fatal: failed to run the auto configuration service
Asked by oracle.apps.ad.clone.ApplyApplTop
Env details-
Apps 11i version
Version of DB - 11.2.0.1
Help, please.
Thank you
Thanks for the update.
Problem is solved now.
In fact, is copies on PROD that did not exist on the server to clone.
-
Configuring the listener pending side before running the RMAN DUPLICATE
Version: 11.2.0.3
Platfomrm: Solaris 10
We will create a DB physical standby for our primary database using RMAN Duplicate.
Our primary DB details
Names for standbyDB_NAME = ADPTGMS DB_UNIQUE_NAME = ADPTGMS
Question1.DB_NAME = ADPTGMS DB_UNIQUE_NAME = ADPTGMSDG
Next to the day before, before I run the duplicate RMAN, I need so that it starts the empty instance in NOMOUNT State. Right? Can I configure export ORACLE_SID DB_NAME or DB_UNIQUE_NAME?
Question2.
I understand that it is a precondition not to have the listener towards the top pending side make the RMAN Duplicate (otherwise how RMAN will connect to the dummy instance in the side standy)
Next to Eve, there is no DB turns again. But for the RMAN to connect to the Instance of a model, I configured and started a listener as shown below. Is this really?
$ cat listener.ora # listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora # Generated by Oracle configuration tools. LISTENER_DG = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 10.80.16.179)(PORT = 1524 )) (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2012)) ) ) $ $ $ $ lsnrctl start LISTENER_DG LSNRCTL for Solaris: Version 11.2.0.3.0 - Production on 20-DEC-2012 00:14:19 Copyright (c) 1991, 2011, Oracle. All rights reserved. Starting /u01/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: please wait... TNSLSNR for Solaris: Version 11.2.0.3.0 - Production System parameter file is /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora Log messages written to /u01/app/oracle/diag/tnslsnr/tigris179/listener_dg/alert/log.xml Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.80.16.179)(PORT=1524))) Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2012))) Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.80.16.179)(PORT=1524))) STATUS of the LISTENER ------------------------ Alias LISTENER_DG Version TNSLSNR for Solaris: Version 11.2.0.3.0 - Production Start Date 20-DEC-2012 00:14:24 Uptime 0 days 0 hr. 0 min. 3 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora Listener Log File /u01/app/oracle/diag/tnslsnr/tigris179/listener_dg/alert/log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.80.16.179)(PORT=1524))) (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2012))) The listener supports no services The command completed successfully
Hello
The link I gave in my previous post features a display of very good example:
Primary:
Pfile/Spfile name: initprim.ora/spfileprim.ora db_name=prim db_unique_name=prim
Standby time:
Pfile/Spfile name: initstnd.ora/spfilestnd.ora db_name=prim db_unique_name=stnd
In your case:
While adding a static entry to the listener of the day before, SID_NAME should be the DB_UNIQUE_NAME of the database pending. Also the pfile/spfile Eve must be associated with the DB_UNIQUE_NAME of the previous day.
The pending database ORACLE_SID would be the DB_UNIQUE_NAME of the database pending. Hope that's clear!
Kind regards
Shivananda -
Hi, I'm new to macs and Fusion. I have a MacBook Pro 13 mid-2009, running 10.5.7 and Fusion 2.0.5, running Win XP Pro SP3 as the virtual machine (not in a bootcamp partition separate). I added a second network as a bridged network adapter (first one is set to NAT). I'm trying to connect my wireless panasonic (802 11b) to the virtual machine display, as I do on my old sony PC. Normally, I turn on the wireless on the PC, find the network wireless in Win XP and configure my SSID and necessary of static IP address and configure the NIC to search only ad-hoc connections (non-infrastructure). I also turn off the firewall so that it can work. There is a panasonic program runs on the PC (which I also installed on the virtual machine) makes it all happen once I have the connection. So the place that seems to be stuck, it's that I can't find a wireless to configure network adapter since--what the VM is a NA standard, so there is no place to specify the SSID, ad-hoc and disable the WEP key. Someone has ideas how to go beyond my current state?
In addition, the panasonic only works at 800 x 600 for the display resolution, so it will automatically change the graphics settings. I guess that's not a problem on the VM, but thought I would ask in advance in case someone sees a problem with it.
Thank you very much.
Larry
If the only way you can connect to the device is via WiFi, then you will need to provide your own WiFi USB network adapter to the virtual machine because Fusion presents only the network card Ethernet wired to the Virtual Machine, regardless of the host network adapter is the main map.
-
BI Publisher, creating connection to the two base configurations Planner
Hello
Please tell me how to create configurations of connection at the base two Planner in BI Publisher
ADMIN-> Scheduler configurations
Kind regards
MohanMohan,
Even if you keep the details in two DB, but on a single Scheduler instance will run.But for the Dev environment use DB1 and DB2 use to Prod environment
I think that there is no way to have two config scheduler for a single service.
Thank you
Saichand.v -
Hi all
I got following error while cloning an instance of R12 on HP UX.
After having copied from source to target, I ran perl adcfgclone.pl dbTechStack.
error...
Start the synchronization context file system and its models with those of the database
Database connection: impossible
Support changing context OAM function: unverified
Support OAM customization feature: unverified
File system model: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
.
.
.
No download file of context and its data base models. Connection to database failed
.
.
.
[AutoConfig error report]
The following report lists the errors autoconfig met in each
execution phase. Errors are grouped by directory and by phase.
The format of the report is:
< file name > < phase > < eventually return code >
[INSTANTIATE PHASE]
AutoConfig impossible successfully to instantiate the following files:
Directory: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/install/RSU_reeldev
adcrdb.sh INSTE8
Fate of automatic configuration with State 1
RC-50014: Fatal: failed to run the auto configuration service
Asked by oracle.apps.ad.clone.ApplyDBTechStack
Kind regards
Sandeep.Hi user;
Please check:
12 adcfgclone release fails with AC-00423, RC-50014 adcrdb.sh lack of filesystem [549872.1 ID]
RC-50004: Fatal: error occurred running adcfgclone.pl dbTier RDBMS 64 bit [336875.1 ID]It may be useful
Respect of
HELIOS -
I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection. Whenever I stopped him it and I have to choose. This does not happen on another laptop or desktop that I have. Is there a safe solution for this?
Hi Ron,
1 Windows operating system you are using?
2. you receive messages or error codes?
You can read the following article and check.
Windows wireless and wired network connection problems
If you use Windows XP, then read the following article:
How to troubleshoot wireless network connections in Windows XP Service Pack 2
This problem can also occur when the power management profile turns off your network card.
You can try the following steps and check if it helps.
a. click Start, type device manager in start search and press ENTER.
(b) in Device Manager, expand network adapter.
c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.
d. go to the power management tab.
e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).
f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.
Maybe you are looking for
-
Receiver Yamaha RX-A730 of airtime either available on iOS devices
Hi all Since an update of my wireless network, my yamaha receiver RX-A730 airplay functionality is unavailable on my iOS devices. It still works, but since an update of my wireless settings I can't listen to music more than my iOS to my Yamaha via Ai
-
Try to unpack a file open to dozens of windows
Original title: Winzip! Hi again Once again needing help. I don't have Winzip on my pc, so I had trouble opening zip files. Another kind person told me how to fix it, and I click with the right button on the files, select extract and get a 'folder '.
-
Inspiron 13 (7352) looking for a burglar to fit smaller locking port security cable
I am trying to get a cable of anti-theft security for my Dell Inspiron 13 (7352). The lock of Noble (Dell A6451164 part / manufacturer part TZ08) does not fit in the slot. The slot on my Dell Inspiron 13 (7352) measure 0,1875 "(3/16"). " No one knows
-
Enter the CURRENT password: message
I turned on my HP Mini 110 1115SA today and it suddenly started to give a ' password enter CURRENT: "message." What I have read, I need a bios reset password. How can I get a?
-
Hey, when I try to update my DirectX, I got an error message that says: «an internal system error has occurred, please refer to the ectect...» "In any case TI reffers Readme in a newspaper that I can not seem to find it. without this most recent upda