Beginner looking for help

Similar Questions

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.

• I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? T

  I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? Thank you!

  ICES.html https://helpx.adobe.com/x-productkb/Policy-Pricing/Cancel-subscription-Acrobat-Online-serv

  You will need Acrobat to convert files > 100 MB.

  [subject moved to cloud Document PDF Services forum]

• Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Can I migrate and then upgrade?

  Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Should I migrate and upgrade?

  You don't want to think in terms of migration when it comes to Adobe software.  You must install using installation files.  There is no need to have installed CS5 unless you plan to use it.  There is no way to upgrade of CS5 at CC, there is a reduced plan should soon be interrupted.  You get the first annual subscription for almost half of the normal price.

  Creative cloud plans

  https://creative.Adobe.com/plans

  Director of the installation:

  Download/install the desktop application, connect and install applications subscription.

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• Looking for help of Flex

  I'm looking for someone to work with me for a flex project. I'm well-studied in Flex (all the books and familiarize Lynda.com tutorials and Flex in a week several times tutorials), but can't put the pieces together to finish my project. I've posted questions on this forum and people have been incredibly helpful and responsive. The problem is that whenever I have a question, I have to review the entire project to get to the point where I have a question, so I'm looking for someone to become familiar with the project to help me over the hurdles. I looked at individual support options in the Adobe support section but I can't to go round trying to make that support work for using the option. If anyone is interested (I expect to pay for this support) please contact me at [email protected].

  I have provided this type of basic support to others at $50 / hour. I charge sliced 15 minutes, so for quick questions you would pay in general
  $12.50 per issue, $50 / hour for more involved questions.

  One thing, I'm more a front-end guy, so that I can help with HTTPService connection to PHP scripts, I'm not aware about ColdFusion,.
  Java, etc.

  I have a day job, so I have to answer outside the hours of 9-5 hour standard Pacific.

  I have you emailed about this, please respond to this email about this.

• looking for help on the script PowercLI.

  I'm looking for a script powershell group based vmsessions on the State of vmtools version so that I can plan the upgrade to version VMtools on virtual machines.

  Please use the below script and let me know if problems.

  Claire

  $logfile = "result.txt".

  $vms = «»

  $output = «»

  $temp =""

  $vm =""

  To connect to vcenter Server

  $vcenter = read-host "enter the vCenter Instance.

  to connect-viserver-Server $vcenter - WarningAction SilentlyContinue

  Get-Date | out-file $logfile

  echo "= details = | out-file $logfile - Append

  $vms = get-Content.\list.txt

  $output = get - vm $vms | SELECT name, vmhost, PowerState, version, toolsversion, toolsversionstatus, comments.

  | Tri-objet-property toolsversionstatus | FT - AutoSize GroupBy - toolsversionstatus-wrap

  $output

  $output | Out-file $logfile - append

  Disconnect-VIServer *-confirm: $false

• Looking for help with the motion in still menus of EI.

  Need help to make a menu driven sequelae. can understand the import process in yet. I can't the buttons I did in AE to work. Anyone?

  Read this (but do not have your plan until you read the link at the end of the post):

  http://help.Adobe.com/en_US/Encore/CS/using/WSF49EA5DB-3743-49C2-9831-F66328B192F8.html

  The important part is:

  «The loop point is used first to disable the buttons.» Until the loop is reached, the Viewer cannot select or activate a button. The menu returns to this point on each repetition, so the buttons are disabled when the menu is displayed first. For rehearsals, the duration is shorter and the starting point for all video content in the menu is offset. »

  So in AE, you create a video (the substance of the application) which includes the image of the buttons as they fly in. Still is the addition of highlights. AE for a period of time could also create layers of button, but you will be less confused if you use Photoshop and again for the file menu itself.

  I forgot to give you this link for help, which is the help file to work with AE:

  http://help.Adobe.com/en_US/Encore/CS/using/WSA5513911-0AD1-440C-BDAD-2E0E806B425E.html

  This method begins with a menu into Encore and creates an AE composition from there. It can only work with AE CS6, since you have EN CS6. I don't remember if it is technically a form of dynamic link, which requires corresponding versions of the applications.

  There are a lot of ways to skin this cat.

• Beginner looking for best practices to implement my first ESXi server.

  Hello, tomorrow I will start my first company ESXi.  I ordered a HP Proliant ML350 with e200i Raid 5 controller.  I bought 4 1 TB Sata disks and plan to put them all in Raid 5 for 3 TB of data storage.  I currently have a file Win2k3 server which has approximately1.5TB of files on several physical disks spread now.  My question is how these data should be moved to the new server?  Should I build a new machine virtual server OS 2003 or 2008 and then allocate all 1.5 + TB I this one VM?  How the data will look like ESXi?  Have I not separated or just 1 virtual players a large?  Or is there a better solution?  What should I do when I start running out of space and should allocate more space to the descent to a certain VM?  I apologize if this is a stupid question, but I'm just a little confused and trying to get all oriented upward when I started on this project in the future.

  Thank you very much!

  Dave

  You can build on Windows Server as shown above, and then create a virtual disk to host your data. You can then use something like copy robo to synchronize the data from your original data source, you could kick off for a weekend and then use robocopy to just capture changes before making your actual failover. Just be aware of the limits that the other person has remarked with the 2 TB. You can select the block maximum size when you create your VMFS datastore for your data drive, otherwise the VMDK max, you create will be a little less then you are looking for.

• Error - looking for help to recover or restore my data reading disk Windows 7

  My Windows 7 Pro machine restarts automatically while I had an open browser window (I didn't actually see it happen) but now I just see a message that says "a disk read error has occurred. Press Ctrl + Alt + Delete to restart» By pressing this key sequence does nothing. Just see a black screen with this message.

  I have booted from the CD of Installation Win 7 then went to repair. I tried to do a system restore, but no restore points could be found, so I chose the first option. No bones were listed in the list. A few diagnostic tests was performed and I looked at the details. The series of tests except the last System Volume has been altered. It says to reboot to see if that could fix the problem. Unfortunately, it does not and I still see the same black screen with the error message. BTW, as you know, I can't start in safe mode. Also restart on a Win 7 CD now is no longer gives me an option of just complete repair install. I tried to use this boot drive as one secondary drive on another machine to Win 7, but the OS tells me I need to format the disk before it can be used.

  I'm willing to put in the time to try to get the data restored on this boot drive, but don't know what I should try next. Reload the operating system completely wipe the file allocation table and make the data unrecoverable? Please notify.

  -darksquare

  Thanks for the help everyone. I was able to restore all my files to the best of my knowledge. Just a quick overview in case others are experiencing a similar problem:

  1 SSD with Win 7 wouldn't start. Message displayed "a disk read error has occurred. Press Ctrl + Alt + Delete to restart» I restarted the machine and went into the BIOS to check that the drive was detected, which it was.

  2. started to Win 7 install DVD and select the repair option. Ran chkdsk on the drive affected with FixMbr and FixBoot, BootRec. I tried to restart after each of these executables, but he led the original disc reads the message. Along the way, the error messages I received were that the System Volume was damaged and Windows cannot recover master file table.

  3 reinstalled Win 7 on a separate startup disk (HDD) and mounted the SSD corrupted as a slave drive. Win 7 brought a dialog box to reformat the SSD drive as the data seem to be unreadable. Has rejected the format option. At this point, I am unable to browse the files on the SSD via Explorer.

  4 pitted some tools part 3 the SSD which indicated that the partition table on the disk doesn't have the hexadecimal value of appropriate endpoint.

  5 Ran chkdsk /r. Finally, some luck. This process lasted several hours and repair the files of nearly 1 million. The reader become navigable via Explorer. The directory on the disk structure has been restored and files (so far I have not found the missing files).

  -darksquare

• Beginner looking for best practices in configuration in AE CS4 (MacPro 8core)

  Hello

  I am a video editor familiar with FCP and motion, moving in AE CS4 because it's more power in a 3D space. I installed the program and started my basic training of Lynda, but I want to make sure I got the installer so as not to cause problems on the road of.

  For example, in FCP, I use a second drive for makes etc., and a RAID array for FCP files and various media (both imported and exported) organized by project and by type. I intend to do the same for EI, but looking at the AE prefs, I see I can assign memory per CPU etc, and I just want to be sure that I use the Procs and RAM effectively. The machine is a machine of 8-Core MacPro with 12 GB of RAM. The program sees 16 processor cores, so I should split the 10 GB hosting AE to use during these carrots (using the pref multiprocessing tab), or simply let AE understand?

  In addition, I am confused about the overflow Volumes option. What gets put there, when and why?

  Finally, if there is a newsletter along the lines of the Larry Jordan FCP (larryjordan.biz) site I'd reference.

  Thanks for your help.

  -C

  Concerning the use of RAM and processor, see the following page:"Performance Tip: don't starve to death your software of RAM '. Following the guidelines there for 12 GB your computer, would you let 2 GB for other applications, perhaps a couple of GB for the trial leading to hold executives preview RAM - leaving you with 2 GB each of four background rendering process.

  Also, don't be fooled. 8-core computer is just an 8-core in After Effects is. The so-called doubling of processor cores created by hyperthreading is not relevant for simultaneous rendering of several images of multiprocessing.

  Regarding overflow volumes, see the following page: "of the volume of overflow and segment settings"

  If you are new, please start here. Pretty please?

• Looking for HELP online, HTML is broken

  Just noticed that the search for online help for the form is broken. Instead of keys/form fields, it displays an error message.

  Yes, just looked at him and his is fixed now!

• Looking for help on the restructuring after several virus attacks

  Hi all!

  I want to reformat my laptop (Compaq Persario CQ61).

  I caught a backdoor, Trojan a few months back and I can't keep my computer virus. It takes all the Anti Virus software that I install. I ordered and received Windows 7 operating and the CD of drivers a few days ago. But I'm not too computer savvy when it comes to something like this and everything I read about reformatting is scare the heck out of me--looks like a lot of problems trying to do this?

  Can someone give me an overview more and help me?

  Thank you

  Tammy

  Hi Tammy,

  I'm sure it will be fine, but you can always post if you meet problems.

  Kind regards

  DP - K

• Beginner looking for the best upgrade memory for Tecra 8000

  Hello - I am currently looking to upgrade the memory on my Tecra 8000 the current 96 of at least 256.

  Is it possible that I can't find info on 256 MB extensions that are compatible

  I also want to upgrade my hard drive of at least 20 Gb, but I think it will be easier

  Any advice would be much appreciated

  Hello

  In my opinion, you should contact the Service partner and ask them what a memory module is compatible with your laptop. I found that PC100 128 MB (PA3005U) is certainly usable for Tecra 8000.

  Please be careful because all modules may not be recognized by BIOS correctly.

  It is possible that 256 MB RAM PA3069U - 1 M 25 is compatible but I'm not sure about this. Pick up information by the Service partner before buy you one.

• Looking for help developing code labview [Urgent]

  Hello
  I need assistance in the development of labview code. I'm new to labview and will appreciate if someone can help me in this matter. I need to control the intensity of charge of ca (halogen with 2kW, 230V, 50 Hz) using Labview and Arduino. But my project with interruption in the Arduino, so it is not possible to use the Labview Interface for Arduino (LIFA).  I searched and it might be possible to use VISA series in this case. The circuit and the Arduino code is attached. Someone who is a subject matter expert can help me?

  The concept of my project is almost the same with https://www.youtube.com/watch?v=oeVJ5bs6E8M&feature=youtu.be

  Hello

  You will find all the information you need and examples of LabVIEW VI from LabVIEW Interface for Arduino

  Interface LabVIEW for Arduino

  Kind regards