behavior strange battery hp probook 4520 s

Similar Questions

• Behavior strange battery on the iPhone 5 with iOS 9.2

  After installing iOS on iPhone 9.2 5 phone consumes my battery unusually quickly and in a very strange way.

  Specifically, after be recharged to 100%, it can go up to almost 60 to 50% within 1-2 hours of waiting use or with some very basic internet as e-mail, facebook, whats app etc. (not youtube or other battery consuming requests, no call phone and not a lot of applications running on the bottom). If I do 2-3 a few phone calls, the battery can easily go to 0. Another strange issue is that sometimes when the battery indication is around 60-65% the phone is suddenly switched off indicating low battery. I can't turn back on until I plug in power. Then my battery will immediately 0% back to 60-65% and charing. If I disconnect the cable again and wait a few minutes, it climbs from 60 percent to 15 percent. If I connect the cable again, as it did at 60%. A few more times, he spends 40 to 45% to 10% in both directions.

  My wife has an iPhone 5 with iOS installed 9.2 and has similar problems with the battery. On previous versions of the software that we have never had such problems, the battery is sufficient for use throughout the day with plenty of internet and other applications and a few phone calls. My phone is now almost useless, the only way to take the battery throughout the day is to have it on the stand mode with all applications closed and no phone call, and once again the battery remains close to 100% for a long time.

  Is a known, issue y at - it solution or something I can do like downgrade the SW, or should I wait for the next version of the software be released?

  Make an appointment at the genius bar and have checked phones.

  Some units of the iPhone 5 have been manufactured with a defective battery. Apple has a program in place to replace them for free. You can check here serial numbers if your phone is part of the program. https://www.Apple.com/support/iPhone5-battery/

• ProBook 4520 button woes right touchpad

  Hi all.

  Got a new HP's Probook 4520 using XP SP3. I noticed that the touchpad is not what it should be in some windows.

  For example. If I open an Excel spreadsheet and right-click on one of the tabs at the bottom nothing happens. That is to say I don't get the submenu where can I change the colors of the tab etc.  With IE8 if I right click on open tabs by using the touchpad I get nothing. With the help of a mouse, I get the normal submenu. However if I right click using the touch pad on the desktop I get the right menu so I know that the equipment works. Strange problem, but it's very irritating. I had a glance through the different touchpad options (there are a lot!) but I can't find anything in this regard.

  Any help would be appreciated.

  Thank you

  Sammy

  Hi again.

  Just to let you know that if I press "Alt" then the button right then disappeared, the menus appear normal.

  Hope that this 'correction' helps someone.

  Sammy

• HP Probook 4520 s memory 8 GB (2x4gb) Corsair pass without success and failure

  OK, here's the story

  My laptop is HP Probook 4520 s

  with Windows Windows 8.1 (6.3) 64-bit (Build 9600)

  Please see the end of this post for CPU - Z report of specs.

  Currently I have 3 GB of memory installed - had to install their return after failed upgrade.

  Please check back the CPU - Z report for the memory module specifications.

  I bought the memory pack 2 x 4 GB Corsair following

  Corsair CMSO8GX3M2A1333C9 8 GB (2x4gb) 1333 MHz DDR3 SODIMM

  http://www.scorptec.com.au/product/memory/SODIMM/43657-CMSO8GX3M2A1333C9

  Plug new modules:

  Lifetime warranty
  Size 8 GB (2 x 4 GB) Kit
  Performance profile none
  Fan included no.
  Heat spreader-
  Configuration memory dual channel
  Type of DDR3 memory
  Package - memory Pin 204
  Package - Format memory SODIMM
  Tested voltage 1.5
  SPD tension 1.5
  PC3-10600 (1333 MHz) memo speed
  SPD speed 1333 MHz
  Tested speed 1333 Mhz
  Tested latency 9-9-9-24
  SPD 9-9-9-24 latency

  When I installed the memory module on the laptop, I couldn't go essentially exceed the stage of the POST. Is the HP logo appears on the screen and what is it... That's all... nothing beyond this point.

  When I went to the BIOS settings, memory read 81xxMB successfully, it is essentially 8 GB of RAM.

  I tried to reset the BIOS settings, has not yet.

  I removed the 2 x 4 GB modules, put back the two original modules of 1 GB and 2 GB - those who came with the laptop-, everything worked again.

  What was not right here... ?

  PS please don't answer not with lame answers "it's weird", "that's strange", I know it's weird and strange. I want clear and specific suggestions.

  Report of CPU - Z below:

  TXT of CPU - Z report
  -------------------------------------------------------------------------

  Binary files
  -------------------------------------------------------------------------

  CPU - Z version 1.69.0.x64

  Processors
  -------------------------------------------------------------------------

  Number of processors 1
  Number of threads 4

  APICs
  -------------------------------------------------------------------------

  Processor 0
  -Core 0
  -Wire 0 0
  -Thread 1 1
  -Core 2
  -0-4 wire
  -Wire 5 1

  Timers
  -------------------------------------------------------------------------

  Timer ACPI 3,580 MHz
  Timer HPET 14,318 MHz
  Timer perf 2,208 MHz
  Sys 1,000 KHz timer
  Timer 133,02 MHz BCLK

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of cores 2 (max 8)
  Number of threads 4 (max. 16)
  Name Intel Core i5 430M
  Code-named Arrandale
  Specification Intel (r) Core i5 CPU M 430 2.27 GHz
  Package (platform ID) Socket 989 rPGA (0x4)
  CPUID 6.5.2
  CPUID long 6.25
  Core Stepping C2
  The 32nm process technology
  TDP limit 25 Watts
  Basic speed 2527,3 MHz
  Multiplier x Bus 19.0 x 133.0 MHz speed
  2394,3 MHz rated Bus speed
  Stock frequency 2266 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT - x
  Data L1 cache 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB, size 4-way set associative line, 64 bytes
  L2 cache 2 x 256 KB, size 8-way line set associative, 64 bytes
  Cache 3 MB L3, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Turbo Mode supported, enabled
  2533 MHz Max turbo frequency
  Max-non-Turbo report 17 x
  Max turbo report 19 x
  Rate of return max 9 x
  TDC limited 21 amps
  Basic NT 21 Watts
  Uncore PDT 4 Watts
  Power @ 9 x 7 Watts
  Power @ 10 x 8 Watts
  Power @ 11 x 9 Watts
  Power @ 12 x 11 Watts
  Power @ 13 x 13 Watts
  Power @ 14 x 15 Watts
  Power @ 15 x 18 Watts
  Power @ 16 x 21 Watts
  Power @ 17 x 25 Watts
  Number of bus max 255
  PCI peripheral device connected to the 255 bus, device 2, function 1

  Chipset
  -------------------------------------------------------------------------

  Northbridge Intel Havendale/Clarkdale Host Rev. Bridge. 12
  Southbridge Intel HM57 Rev. 06
  Graphics interface PCI-Express
  Width link PCI-E x 16
  PCI-E Max Link width x 16
  Type of DDR3 memory
  Memory size 3 GB
  Double channels (symmetrical)
  Frequency 532,1 MHz memory (04:16)
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Time to Row Refresh Cycle (tRFC) 60
  Control rate (CR) 1 t
  Base address e/s MCHBAR 0x0FED10000
  E/s MCHBAR size 4096
  MCHBAR records

  DMI
  -------------------------------------------------------------------------

  DMI BIOS
  vendor Hewlett-Packard
  version 68AZZ version F.0F
  Day 18/02/2011
  ROM size 2560 KB

  System DMI information
  Manufacturer Hewlett-Packard
  product HP ProBook 4520 s
  Unknown version
  series 2CE0211M4C
  UUID {1520830E-6A57-11DF-8C36-42C05900004D}
  SKU WS879EA #ABV
  family 103C_5336AN

  DMI Baseboard
  vendor Hewlett-Packard
  model 1411
  review of KBC Version 57,34
  series 2CE0211M4C

  DMI system box
  Manufacturer Hewlett-Packard
  chassis type Notebook
  2CE0211M4C series chassis

  DMI processor
  Manufacturer Intel(r) Corporation
  model Intel (r) Core i5 CPU M 430 2.27 GHz
  clock speed 2264,0 MHz
  The FSB 133.0 MHz speed
  multiplier x 17.0

  DMI Extension slot
  PCI SLOT1 designation
  type of PCI
  32-bit width
  No. populated

  DMI OEM channels
  String [0] 70/71 79 7 ABS has 7 b 7 c
  v01.4A CSM chain [1]
  chain [2] www.hp.com

  DMI physical memory matrix
  location motherboard
  use system memory
  correction no
  Max 8192 MB capacity
  Max # of devices 2

  DMI memory device
  name high-Slot 1 (top)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  Size 2048 MB

  DMI memory device
  name high-Slot 2 (under)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  size 1024 MB

  Storage
  -------------------------------------------------------------------------

  Drive 0
  Device path \\?\scsi#disk&ven_&prod_st9320423as#4&1f4bc32b&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
  Type set
  Name ST9320423AS
  Capacity GB 298,1
  SMART Support Yes

  USB devices
  -------------------------------------------------------------------------

  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB device USB Composite class = '0xEF' subclass = 0 x 02, seller = 0 x 0461, product = 0x4DB6
  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB Microsoft mouse and detection (USB) keyboard driver, class = "0x00" subclass = 0 x 00, vendor = 0x045E, product = 0 x 0745

  Graphics
  -------------------------------------------------------------------------

  Number of cards 1

  API chart
  -------------------------------------------------------------------------

  ATI I/O API

  Graphics cards
  -------------------------------------------------------------------------

  Display adapter 0
  Name ATI Mobility Radeon HD 4500 Series (Microsoft Corporation - WDDM v1.1)
  Manufacturer 0x103C (0 x 1411)
  512 MB memory size
  Bus device PCI 1 (0x1), device 0 (0x0), function 0 (0x0)
  Vendor ID 0 x 1002 (0x103C)
  The model 0 ID 9555 x (0 x 1411)
  Performance level 0

  Win32_VideoController AdapterRAM = 0x20000000 (536870912)
  Win32_VideoController DriverVersion = 8.97.10.6
  Win32_VideoController DriverDate = 20/06/2012

  Software
  -------------------------------------------------------------------------

  Windows Version Microsoft Windows 8.1 (6.3) 64-bit (Build 9600)
  Version of DirectX 11.0

  Clear and precise. Your laptop uses the memory of 1.35 volts and that you have installed 1.5 volt.

  This is the crucial page for memory you need:

  http://www.crucial.com/store/listparts.aspx?model=ProBook%204520s

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Will be my laptop from inside my warranty boid clening? (hp probook 4520)

  Hi all

  I have a hp probook 4520 for a year and a half now. Where I live there is dust everywhere make my laptop sale. I regularly clean my laptop but I'm afraid to clean it from the inside because of the warranty. The laptop could even reach 90 degrees then in the hot summer days while playing heavy games. The guarantee expires next February, but will open my laptop and my fan cleaning void my warranty?

  Thanks for your time

  Hello:

  Yes, if you go too far in dismantling, will void you the warranty.

  As a general rule, any screw Philips removed do not void the warranty.

  The fact of any removed Torx screws.

  Remove the battery and the power of a/c.

  Put a toothpick in the scale of the fan and slide it between two of the fan blades, so they do not rotate. In spinning the fan will be destroy bearings.

  Then just use a can of compressed air and blow into the fan making to erase what you can.  You can even kick in the exhaust vents too and then again through the consumption of the fan until you see no more than dust blow.

  That should improve the cooling a bit.

  Paul

• HP Probook 4520 s screen does not do anything...

  Hi everyone...

  I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

  It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

  I chat with HP support team, they suggested

  
  

  Please perform a dry boot on the laptop by following the steps below:
  1. disconnect all external devices and adapter unit
  2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
  3. restart the computer by using only the AC adapter.

  But no luck.

  Please provide a suggestion/solution.

  Thank you.

  Fassi wrote:

  Hi everyone...

  I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

  It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

  I chat with HP support team, they suggested

  
  

  Please perform a dry boot on the laptop by following the steps below:
  1. disconnect all external devices and adapter unit
  2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
  3. restart the computer by using only the AC adapter.

  But no luck.

  Please provide a suggestion/solution.

  Thank you.

  In a dark room, boot up your laptop and shine a flashlight on the LCD screen.

  If you see a very dark Windows desktop, then you have the chance.

  The backlight inverter has failed and must be replaced. If you are a kind of DIY user, then this is a repair at low cost. If this is not the case, have done so in a store could cost @ $75.00.

  If you still don't see anything then the LCD failed. It is a more expensive repair.

  If your laptop is still within its warranty period, it's time to Contact HP warranty repair service.

  Best regards
  ERICO

• ProBook 4520 s: BIOS LOCKED 4520 s

  Hi, I have a Probook 4520 s and I want to get into the bios, but it says administrator was locked with a password, I see in the forum, I know that you can provide me the Adminisitrator password unlock code for my laptop, I'll give you all the data you need , Thanks for your time and your patience, cordially Juan Pablo

  ProBook 4520 s

  SERIES: (deleted content)

  Product: XR178LT #AC8

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• ProBook 4520 s - exchange of the wireless network card

  Hello everyone.

  I think the exchange of the wireless network card in my Probook 4520 s, due to the low flow.
  So I searched for a while a 5 Ghz supporting the card and found out that I am only able to get in the "white" cards list working. Then I looked at this page:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c02487851 & jumpi...

  These cards can be any, that have been used in 4520 s. Mine (according to the Device Manager) is the Broadcom 4313 802.11b/g/n. This thing only supports 2.4 Ghz. Now, I looked at the list for a 5 Ghz supporting the card. I think that the 802.11A/B/G/N WLAN Intel HMC 572520-001 minicards can operate on 5 Ghz, because I read, that A appears only with maps of 2.4/5 Ghz. I read too, that maps of 2.4 / 5 GHz have 3 antennas, but on this card I only the slots for 2. Is this good? And this card would go into my 4520 s?

  Greetings,

  Colony

  Hi, colony:

  You are right about your statement about the cards being described as A/B/G/N dual-band.

  The best thing to do is look at Chapter 3 of your service manual.

  You can only order one of the cards listed as supported and it MUST have the HP reference on it or it won't work.

  I see only two possibilities for you...

  The 6200 Intel and Broadcom 4322.  Make sure you also get the part # that corresponds to what country you live.

  If your current Broadcom card has integrated Bluetooth, you will lose your Bluetooth capability if you order an integrated HP bluetooth module and probably the cable too.

  None of the dual-band cards have embedded bluetooth.

  Link to the service manual.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02439213/c02439213.PDF

  Then, you can order a card on the link below.

  If you do not live in the United States, you can change your country at the top of the page to yours.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6857BCBBC4CD4470B9282F130A563697

  Paul

• ProBook 4520 s: lack of features on a ProBook 4520 s after upgrade Windows 10

  Hello dear community

  Long story short: I have a HP ProBook 4520 s and yesterday I upgraded manually (with the tool provided by MS) Windows 7 Pro to Windows 10 Pro. Everything went very well and smooth and it works perfectly well until now.

  The problem is that some of the features of the laptop no longer work. Here are some examples:

  -Highlight the option on touchpad

  -built-in camera

  -Some FN buttons like the one for the brightness of the screen while others (for example, the volume and email) working

  My reasoning is that it lacks certain drivers or these functions are somehwat is not compatible with the new OS (it's a 5 + year old PC after all), but I could be wrong. I'd like to hear some suggestions and opinions on this.

  If someone needs to my specifications complete, there are:

  Operating system: Windows Pro 64-bit 10
  CPU: Intel Core i3 330M @ 2.13 GHz 61 ° C Arrandale 32nm technology
  RAM: 4.00 GB Dual - Channel DDR3 @ 532 MHz (7-7-7-20)
  Motherboard: Hewlett-Packard 1411 (CPU 1)
  Graphics card: monitor generic PnP (1366x768@60Hz)
  512MB ATI Mobility Radeon HD 4500 Series (HP)
  Storage: 1043GB Western Digital WDC WD1001X06X-00SJVT0 (SSD) 42 ° C Black2
  Optical drives: DTSOFT device CdRom virtual hp DVDRAM GT30L
  Audio: AMD High Definition Audio Device

  Thank you for reading. All the tips and comments are appreciated.

  Cap.

  Hello

• HP ProBook 4520 s Notebook PC - CPU upgrade

  Product: HP ProBook 4520 s Notebook PC
  OS: Windows 7 64-bit
  
  HELO,
  
  I want to upgrade the CPU on my laptop. It comes with "Intel i5 m460" - 2 carrots. Is it possible to replace it with a 4 core CPU for example "processor Intel Core i7-720QM Mobile" or "Intel Core i7-740QM Mobile processor"? Is there a rule of thumb to check what CPU can be updated and with which we? What would be the best equipped (to the family of the i7 - 4 cores) CPU update for my situation?
  
  Many thanks in advance,
  Tom

  Unfortunately, the answer to this question is no.
  
  The best compatible optional processor is the Intel Core i7-640 M and has two physical cores can run four threads.

  Best regards
  ERICO

• ProBook 4520 s: recovery disks

  Why my HP Pavilion Elite used recovery disks work in my Probook 4520 s computer laptop?

  Recovery discs are specific to each model. You cannot use a different model PC recovery discs.

• Kingston ValueRAM 8 GB 1600 MHz: ram HP ProBook 4520 s compatibility

  My computer specs are as follows:

  HP ProBook 4520 s

  Intel core i3 M380 @2. 53 Ghz

  RAM: 4 GB

  OS: 10 64-bit Windows

  I want to buy

  Kingston ValueRAM 8 GB 1600 MHz DDR3 CL11 USBavec 1.5V

  https://www.microsoftstore.com/store/MSCA/en_CA/PDP/Kingston-ValueRAM-8gb-1600MHz-DDR3-CL11-portable...

  This will be compatible with my laptop?

  Thank you

  Hello

  Have you tried an essential tool? It supports only 8GB maximum which means 4 GB x 2. The Kington 8 GB will not work. You can also buy

  https://www.Amazon.com/599092-001-Hewlett-Packard-1333mhz-Pc3-10600-SODIMM/DP/B00DUGHZ3G

  Kind regards.

• HP Probook 4520 s: HP Probook 4520 s and Windows 10 > Bluetooth

  Dear jury,

  has obtained a ProBook 4520 s with a Wifi/Bluetooth Combo of Ralink.

  Updgraded to W10 64bits.

  Everything works fine, exceppt Bluetooth,

  be struggling for 2 weeks and about to give up :-(

  any suggestions, the steps, the pilots could work?

  Thanks in advance

  Christoph, Philippines

  Hi, Christoph:

  Unfortunately the Ralink BT 3.0 or earlier version of hardware does not work in 8.1, W8 and W10.

  Ralink cards with hardware version 4.0 BT have supported for these operating systems.

  If you want internal bluetooth, you will need to replace the Board with one of those enrolled in the service manual wireless.

  The only other wlan supported with BT that I see listed is this one...

  WiFi 802.11b/g/n 1 x 1 Broadcom 2070 Bluetooth 2.1 + EDR Combo adapter and 4313 - reference HP 600370-00.

  I believe that the bluetooth radio and model wireless card will work on W10, but I can't say 100% for sure.

• ProBook 4520 s camera issues after upgrade from Windows 7 to Windows 10

  ProBook 4520 s has problem with webcam after upgrade to Windows 10.

  Skype and other software do not have access to the camera.

  Drivers installed after the upgrade - universal HP (Realtek driver) looks OK in Device Manager.

  FIX:

  -Deletion of Arcsoft Camera sharing (installed on Windows 7 at first) in the Device Manager.

  -Download and install PC Camera Driver from Realtek Realtek support on site area:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=30&PFID=43&level=4&Conn=3&DownType...

  NB needs to restart.

  Skype now see camera and works OK.

  Solved.

• HP ProBook 4520 s problems

  Hello

  I recently installed windows XP on my ProBook 4520 s, and I have a problem with my network controller. I can't find the driver for it, even you I've tried a few, but they did not work and I can't connect to the internet.

  Can you please give me a list of software that I install on my laptop? I know that they are in the tab support & driver but I don't really know which is useful or not for my windows XP.

  My product and serial number are: WK511EA #ABB (the product) and {removed privacy} (series)

  Thank you very much

  D. Sorin

  Hello:

  The device that you posted is your HP Bluetooth module:

  This driver and software should take care of this.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145198&prodNameId=4145326&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-80152-1

  What is the string of letters and numbers of your wired network card device ID?  It appears in Device Manager?  If this isn't the case, you must go into your BIOS and in device configuration menu, make sure that your LAN controller is enabled. If this is the case, then set the LAN/WLAN switching for people with reduced mobility if it is set to active.

  You must save the settings, where you changed by pressing the F10 key and exit the BIOS.

  Paul