Similar Questions

• The embedded controller (EC) data returned when none was requested. (T420s)

  Everyone sees this warring newspaper system running Windows 8 or Windows Server 2012?

  : The embedded controller (EC) data returned when none was requested. The BIOS may try to access the European Community without synchronization with the operating system. These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

  Should I just ignore it?

  Concerning

  Anders Jensen

  This message normally appears permanently, if TPFanControl or PFControl is installed and the start-programs-TPFanControl-optional-acpiecnl was not used to disable logging these events...

• Why am I being denied access to Behance when I was a member since April 2013?

  I just tried to connect to Behance and he gave me the following message is displayed:

  Access denied

  You have more access to this service. Please contact Adobe Customer Service if you think that's a mistake.

  Please follow this link.

  According to "this" link just you goes back to the login page and you Gets the exact same access denied message. I am very confused because I have never had any problems to connect to my Behance account before.

  Hello - it was a temporary bug - if you sign now, you should be good to go. Sorry about that!

• Satellite A500-138 - battery gets smaller when it is off

  Hello!

  I recently bought the A500-138 and I noticed that if the computer turns off for more than half a day the battery power is lower.
  For example, after 2 days when the computer does not work at all the battery starts to 88%.

  It it normal or there is a problem with the battery?

  Thank you.

  Hello!

  I n t have any new Satellite A500, but on my Satellite A300, I got the same problem battery gets low when it was off.

  After searching a bit here in the forum, I founded that I disable the Wake-On-LAN feature in the BIOS. In addition, I recommend disabling the function USB Sleep & Charge you can find also in the BIOS.

  It works for you too?

  Good bye

• VM shows two warehouses of data being in use, but use only one?

  Hello

  I am trying to migrate from VMFS3 to VMFS5 and perform this moving VMs to save some data warehouses and then delete/recreate the data with VMFS5 store.

  So far so good, however, I have a VM that signals that it uses two data warehouses. The first is the datatore where it is in fact, the second is a data store where an ISO was mounted on the virtual machine. But even after deleting ISO the VM configuration and proceed to "client" the stills VM shows that store of data as being in use. Other virtual machines that I removed the ISOs don't exhibit this behavior later.

  When I browse the data store, I don't see any references to this particular virtual machine - there is just the folder that contains the ISO standard.

  Is it possible to enumerate what virtual machine actually uses the data store?

  Thank you

  Michael,

  I don't know if it's documented anywhere. I saw this problem a few times with network connections, where the port group was changed to a virtual machine with snapshots.

  André

• "Service location" uses data from my data plan when it is on?

  My iPhone 5 is my first smart phone.  Unlike most people, I rarely use it as a laptop.  I just use it as a phone.

  I'm confused about what "data" are and when I use 'data' of my package of data and when I'm not.  "Location services use data.

  my plan when I activated?  Or can I leave the location services on all the time without emptying my small data assignment?

  Thank you

  No, location-based services do not use data simply by being on. They will use more autonomy . An app of navigation such as the construction of maps use data because the application downloads maps on the fly.

  You can check what the things are using data by going to settings > cell and drag down. You will see a list of applications that can use data and a switch. In small print under the name of the application is the amount of data that the application operates since the last time you reset the stats. You can reset the data all the way down the screen on your billing date if you want to get an idea of what is using your data. Activate the switches or disable depending on whether you want to allow a particular application access to cell data.

• Message from blackBerry Smartphones: the page you requested was created using data from the form.

  While closing a link to expedia.ca a message come to say: the page you requested was created using data from the form. This page is no longer available.  If you resend the data, any action that has been specified by the form will be repeated.  You want to resubmit the data?  When I click Yes or no, nothing happens except that the message just reappears.  I can't get rid of it so I can't do anything else on my phone, except to answer a call if someone calls me.  How can I get rid of this message from my phone?  I tried to turn it works... even by leaving off the coast for 5 minutes before turning turn it back on.  I can't even check my OS because I do not what anyone on my phone.  I hope someone can help me with this.

  Have you tried a battery pull?  This should fix a problem as you described.

  With your phone, remove the battery, then replace a minute later.  This will do all sorts of wonderful things to your phone for free unclaimed memory, delete no cited source points and make your phone run smoothly.

  Try it and let us know if it does the trick.

• Why raw of Sony DSC-RX100M3 air files strange in PE9 when flash was used in the shot?

  I just bought a camera Sony DSC-RX100M3 and use in RAW + jpeg.  I want to use in my Photoshop Elements 9 raw files, having the Camera Raw plugin version 6.5.0.216 installed. I downloaded the Adobe's DNG Converter 8.7.1.311 version so I can import my Sony raw files into EP 9 because they cannot be used directly. Most of the time these files raw look OK, but when I use the flash on my camera and then look at the raw files in PE9 they seem much more pink than jpeg files. Jpeg files are more or less similar that I remember the scene when I took the picture.

  When I look at the same raw and jpeg in Sony files have (version 4.2.04.17270) software Image Data Converter the raw and jpeg files are similar to one another and there is no colour pink cast in the raw file.

  What I am doing wrong in Photoshop Elements? I have the DNG Converter retains all the information from the original raw file and makes no changes, so why not the raw file look so different when flash was used?

  Thanks for any help you can give!

  AVM

  I interpret the differences that you see the difference between the Adobe Standard camera profile and that Sony made with the colors.

  I can get things to look more like what you see in-camera jpg by simply changing the Adobe Standard camera to camera neutral profile on the camera Calibration tab.  I don't remember if PSE9/ACR6 has these available camera simulation profiles or if you has that Adobe Standard.  If you have the other, then switch to the use of one of them.

  Here's what the image looks like in the last Camera Raw plugin 8.7.1 to PSE13 after having chosen the camera neutral profile that looks less magenta and more green as the JPG:

  

  I think that part of your question is that you have mixed lighting where the light blue flash is mixing with some slightly more hot (incandescent) or (fluorescent) green color to the right side is hotter than the left side.  Apart from the differences in color, there is also a shadow in the foreground, perhaps caused by your sun visor that should be eliminated or your goal is too long to use a flash that relatives or something.

• My browser suddenly always opens on the page it is on when it was last closed and use the tabs even if I turned them off. I tried to reinstall.

  I have my browser open comcast.net Web page and never use tabs. I use firefox for years and am very familiar with it. He suddenly started opening on the last page, he was away when closed and began to use tabs. When I remove Firefox from my computer, he still all my settings. I had this problem once before years and finishes having to delete my entire drive to fix. I would avoid a wipe away this time. I need to know how to get ALL of the browsers install deleted registry information, so I can get a really fresh. And Yes, I have tried all the normal channels and I'm pretty computer savvy. Please help before I go nuts. I use the version the most recent, but that goes back to the old versions didn't help either. Thank you.

  Bob Smith

  Software sometimes external will create or update an optional parameters file named user.js. For some reason, one of the things that often turns in there is a preference to restore your previous session at once. However, because Firefox uses user.js to override your normal parameters, whenever it starts, which then turns into a permanent change.

  More contact information system (next to your message) shows that you have a user.js file. To check what are the benefits and/or remove, try this technical support article: How to fix preferences that will not save.

  Note that by default, Windows hides your search Firefox profile folder and facilitate navigation in Windows Explorer. You can access the folder from inside using Firefox

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should start the folder in Windows Explorer.

  A little luck?

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, plea

  I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, please.

  Safari maxes in a version of Mac OS x.  New version of Mac OS x would be needed for the new version of Safari.

  Firefox is not limited within an OSX and probably has a version that works.  Chrome may as well but is a Devourer of resources.  Opera is a third option.

• When I was able to remove the preinstalled Apple apps I have no use for and take my storage?

  When I was able to remove the preinstalled Apple apps I have no use for and take my storage?

  When Apple decides to make that an option.

  In total, I'd be surprised if apps take up more of one to two hundred megabytes.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• BlackBerry smartphones which connection is the default value? Network or a Wi - Fi connection? And that they will go out when not to use data applications?

  BlackBerry 9810

  Smartphone (3G / H +, Wi - Fi)

  7.0 bundle 1355 (v7.0.0.261) platform 5.0.0.469

  AT & T

  BlackBerry 9810

  Smartphone (3G / H +, Wi - Fi)

  7.0 bundle 1355 (v7.0.0.261) platform 5.0.0.469

  AT & T

  How do I set up my default BlackBerry for Wi - Fi connections, rather than the AT & T network, where a Wi - Fi connection is available?

  Use of data stops when I move to another application?  In other words, if the web page loads always when I move check text messages, or if the web page refreshes periodically.  How does the data usage stops?

  Your default BlackBerry automatically a Wi - Fi connection if such a connection is present and is strong enough.  As long as your Wi - Fi connection is enabled, data will travel through it.  The only way to ensure that no data continues to use the Wi - Fi is turn off once you have finished with it.

  I hope this helps you.

• OK, Adobe, why am I constantly being logged onto my CC account? I can't use the software when it maintains the bombing. The problemhas who spends all day and he killed my workfow - HELP

  OK, Adobe, why am I constantly being logged onto my CC account? I can't use the software when it maintains the bombing. The problemhas who spends all day and he killed my workfow - HELP

  Wish I had read this post before posting. Or ran the spellchecker...

  Anyway, people treated at Adobe callcentre solved the problem. Make sure you connect to the CC of the desktop application. So, good job Adobe...