Belkin USB Hub does not work with my Satellite A30

Similar Questions

• Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

  My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

  Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

  This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?

  Hello

  Please do as I suggested in the answer above is probably the solution.

  You can also do this after the above.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• USB loader does not work with the Defy

  Hey people,

  I myself built a USB socket for installation in my car (in a plug for one of the slots to spare for switches). Technically, it's really simple with a voltage of 5V regulator which limits the 12V battery voltage to 5V for USB. Because I want to only use the sockets to recharge USB devices

  (iPod, phone, GPS,...) in the car, I left the data open pins. Today, I hung my little gadget up to a power supply of 12V, measured at the exit of the catch USB for correct voltage and polarity and then hung my Defy. Unfortunately, it does not work. I was pretty well clueless, what could be the issue so I asked some of my colleagues to hang their phone (HTC Desire, HTC Hero and HTC Desire HD), and each of them has worked well.

  Someone has any idea of what I need to do to get this working? He wants to talk to the USB to determine what port it is connected to a Motorola phone (for some reason any)?

  Thank you very much!

  Jan

  For your application, simply short-circuit the data pins.

• WiMAX Motorola USB modem does not work with my laptop. Help, please.

  My clear USB modem worked for a year and a half and now it will not.  It does not work on my desktop PC.

  A clear employee told me that it is a problem with my laptop.

  Can someone help me?  I do a system restore?

  I have a wireless modum and my Presario CQ50-130US will not accept the connection.  I called the provider, and they say that all systems are a 'go' at their end.  The problem is with my laptop.  I didn't let any guarantee.  Any suggestions?

• An external mouse does not work with my Satellite P300

  Sorry, but I m not well speak English.
  I have installed alcohol on my Satellite P300-1FE but my computer restarted
  I did it again, but it is impossible for me to work with my external USB mouse optical mouse "Trust mi-2500 x.
  It s not recognized. Can I update the driver, Vista tells me it's good, but Vista also indicates that it cannot install it.
  Vista gives me the error code "39".

  "When I am looking for a solution, I see the warning: keyboard cherri evolution is not compatible.
  I don't understand. Can you help me?
  I do not work with the keyboard, so it is impossible to not have an external mouse
  Thank you very much.

  Hello

  Error code 39 always appears if the equipment has not been installed correctly.
  I think you should first try this:

  Remove the mouse driver installed and the software.
  Then remove the USB hubs and USB controllers in Device Manager list.
  Then restart the laptop and wait until the USB ports would be installed again.
  Install the mouse software, and then connect the mouse to the laptop.

  If this will not help, try to remove the installed application alcohol because that might be the reason for this compatibility issue.

• For Portege 3490 AC adapter does not work with the Satellite A100-159

  I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

  Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

  Thanks in advance!

  Hello

  I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
  I think that the card for Portege 3490 adapter is not compatible with Satellite A100

  That the two car/truck/Air 120W laptop charger must be compatible:
  PX1237E-1NPO
  PX1235E-1NPO

• Pavilion 17-g113dx: USB hub does not work on Pavilion 17-g113dx after intallation of win 7

  Hi, I have a 17-g113dx Pavilion, which was originally to gain 10 on it, but I'm frustrated with it and installed win 7.  After the driver installation failed for the USB hub.  Is there a driver that is compatible with this machine and the operating system that I can download?  The hardware ID are listed below.  I have several other questions, but it is the largest.  Thank you.

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  Hello:

  For the first unit, download and install the 2nd driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  For the 2nd device, install you the driver of USB3 has not ended.

  See if it works.  Download and unzip the driver Intel USB3 lasvegaswireman posted.  Do not run it.

  Go to Device Manager and click on the USB hub root of problem.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the Intel USB driver you have unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

  The third device... you run the patch from the link below to activate the TPM on W7 2.0 device.

  https://support.Microsoft.com/en-us/KB/2920188

• USB microphone does not work with Windows XP

  I have problems to make my USB Plantronics Gamecom headset mic works - be when the headset is plugged into USB port, or directly into the sound card. I think I checked all standard solutions: Windows OS updated, update driver for Plantronics, SB Audigy 2ZS Sound card driver updated, its mixer configured to capture a USB device to record the sound/voice and sound/voice playback (except when it is connected directly to the sound card, then I have this option is selected) , microphone not cut with setting the sound card and the "secret" on the micro iteself button is not on.

  Should there be an option to adjust microphone levels when I click "Open volume control" on the volume icon in the taskbar (lower right corner of the screen)? This option does not appear.

  Thanks for any advice you can give me!

  Norm

  Hello Norm58,

  I suggest that you install the drivers for the Plantronics device and check if it is enabled in the playback devices.

  a. Click Start, type Sound in the box to start the search.

  b. click sound in the results of search at the top of the start menu.

  c. click the Read tab.

  d. on the tab 'Read' it has listed the sound options at your disposal. It should read "The plantronics device" click on it.

  e. There should now be a checkmark on this option.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• U2415, USB HUB does not work as usual?

  Hi all

  Today afternoon I noticed my printer disappeared from my operating system... After some tests, I realized that the question at issue also all other devices that I use to keep connected to the monitor usb hub.

  This morning, I left the PC after turning off the screen by pressing the power button, I use to do when I go for dinner... But usually when I come back in the afternoon and I turn on the monitor, all connected devices are displayed correctly and work as expected (printer included).

  This time, something went wrong. I also suspect that maybe I hit a place hurt when I press the button works stop because I was in a hurry...

  Could I have disabled somehow the hub... What do I do or where I could check it?

  Hope that it is not broken.

  Thanks in advance!

  "turn off the monitor.

  Who did the trick!

  When I restarted my PC after you unplug all devices, I have not turned off the monitor.

  Now, I'm just trying to turn the monitor off and then back on. Finally, I inserted the usbkey and check out of "lsusb".

  Look at!

  # lsusb
  Bus 001 Device 006: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102/2.0 / Flash Drive 2 GB PNY HEMA attached 4 GB Stick
  Bus 001 Device 005: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
  Bus 004 Device 001: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  OK, the monitor hub seems to be indicated as "Texas Instruments, Inc. TUSB8041 4 - Port Hub. And you can also see the USB "datatraveler".

  Seems everything is for the best... In any case, very strange question...

  Thanks a lot for your support!

  Sometimes the solutions are the simplest... :)

• Lenovo G505 3.0 usb ports does not work with Win7

  Hello.

  I bought Lenovo g505 and installed Win7 Ultimate SP1.

  The left, two USB 3.0 ports do not work.

  I could not find the drivers for it.

  Help, please.

  
  

• Mouse - touchpad and USB - HID - does not work properely on Satellite L40-139

  The mouse is very unstable. Mouse touchpad both usb do not work properely, but the touchpad a little better. It happens that, even if the mouse using USB to the point does not move, while the left and right button are always react.

  It is brand new computer (L40-139) with initially installed Windows Vista. How can I solve the problem?

  It is very disturbing. Thank you.

  Hello

  have you ever tried to recover your machine, which means a complete reinstallation of your system? First: to exclude the material errors, you must perform this step, and if the error persists, then I suggest you to contact a service partner chartered for a checkup of material and a repair action.

  If the problem occurs after reinstalling windows, visit the following link to find the closest to the ASP available in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Greetings

• External microphone does not work with my Satellite A200-196

  I have the Satellite A200-196 and have connected an external microphone on the front mic port, the laptop recognizes as being there and working, but I can't work. I tried to configure through speech recognition, but it does not.

  I tried to configure it through live messenger, but there is no sound there. I use windows Vista and am totally stuck what to do, please help, I would be very grateful.

  Thank you

  Hell's

  Hello

  Please open the control panel and sound properties there. Click the recording tab and that there should be shown Microphone as it is activated. There, click with the right button of the mouse and choose the option configure speech recognition.

  You will find the Set up microphone option. Start Microphone Setup Wizzard and check the functionality of the mic it.

• 2 GB of RAM does not work with my Satellite A100-528

  Hello

  I bought 2 x 1 GB RAM (667 Mhz). When I insert it inside, my computer does not start. Computer a newer BIOS. With 1 GB (667 MHz) & 256 MB (553 MHz), we do work perfectly.
  Can you help me?

  Michal

  PS Sorry for my bad English.

  Who is the manufacturer of this RAM module?
  Do you use compatible Toshiba or Kingston RAM modules?

• peripheral USB audio does not work with Firefox. works fine with IE. Anyway I can get it to work with Firefox?

  Its a Dell usb sound bar. When streaming video through firefox, no noise. I don't hear the sounds of the general system. The usb sound bar works very well when streaming video through IE. Any advice would be helpful. I'm pretty computer illiterate, so the simple, better!
  Thank you.

  This may happen for security. try to download https everywhere and add in fire Fox. can solve the problem.

• 104Key of Microsoft Wireless Desktop 3000 USB keyboard does not work with a KVM

  I just bought v2.0 of 3000 Microsoft Wireless Desktop combo. I have a KVM switch for two rounds. My problem is the new keyboard switch, in general you simply press the [scroll off] button twice and it doesn't work. I tried to fix this by what I can find, but without success. I need help.

  http://www.TomsHardware.com/Forum/264853-28-some-keys-work-keyboard

  http://forums.AnandTech.com/archive/index.php/t-159825.html