Benefits for two hypervisor servers

Similar Questions

• PAT for two web servers

  Hi all.

  I want to change the MS ISA for Cisco ASA server, but I have problem with PAT.

  The two addresses are published under the same internet address 1.1.1.1 MS ISA server configured static PAT for two web servers, example.web1.com inside the address 192.168.1.10 and example.web2.com inside the address 192.168.1.11.

  When the user try to open the web page example.web1.com the internet ISA Server MS create translates an internal address 192.168.1.10

  When the user try to open the web page example.web2.com the internet ISA Server MS create translates an internal address 192.168.1.11.

  In the cisco example uses single address:

  static (inside, outside) tcp 1.1.1.1 192.168.1.10 www www netmask 255.255.255.25

  but I have two web servers uses the same port 80 and even outside of the address 1.1.1.1

  SAA can create translation URL? For example:

  static (inside, outside) tcp example.web1.com, www www 192.168.1.10 netmask 255.255.255.255

  static (inside, outside) tcp example.web2.com 192.168.1.11 www www netmask 255.255.255.255

  Hello

  To my knowledge, this type of NAT is not possible in the SAA.

  The ASA has nothing to differentiate the 2 translations to eachother other than the order of the NAT configurations. But I think that at the level of your software it doesn't accept even the second NAT configuration that it overlaps with the first. In the most recent software that it would accept the second configuration, but the traffic would still be hit only one of the NAT configurations.

  There must be something on the ISA MS who, in addition to NAT overlapping, knows that static PAT choose based on the requested web page?

  -Jouni

• Windows Server 2008 R2, with two Windows Storage Server 2003 Standard: How can I add the MAC authentication on top of Active Directory authentication for a storage servers?

  I have two running Windows Storage Server 2003 storage servers in a domain R2 Windows Server 2008 Standard.  On top of the Active Directory authentication, I want to add authentication of MAC address for the access to one of the storage servers.  In this scenario, an authenticated user is unable to log on to the target storage server unless the user is also on one of the computers MAC address accepted.  All domain users will have access to other folders and files as configuration storage server in Active Directory.  I already have a user access to installation by the permissions for folders on the storage server target, but I still want to restrict access to specific computers as well.  For what it's worth the server hardware is HP Proliant DL360 G5 for the Standard Server 2008 R2 and server HP Proliant DL185 G5 for two Storage Server 2003 computers.  I don't want to have MAC address authentication as the main means of access control to the network, only for the storage server a as an addition to control Active Directory.

  Hi Kerry,

  The question you posted would be better suited in the TechNet Server Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us informed on the status of the issue.

• Benefits for the ESXi4 on USB

  Trying to weigh the pros and cons for a server Dell with ESX already installed on a USB key.

  Is it faster? Is it less expensive? Less or more reliable than a raid?

  IF the whole system op is loaded on startup, and the USB is not yet accessible?  and neither would the disc, which explains why you say that it only affects boot... is that correct?

  Once the operating system has started, it turns into RAM and only accesses the USB key from time to time (I think it's once in an hour) to update its configuration.

  Right now I'm just a server with a raid configuration.  I was about to do two 70 GB for the op sys...

  I wouldn't do. Instead I would spend the money for either a good RAID controller with battey write cache supported (for a much better drive performance) or buy a 300 GB HARD drive, in case you plan a RAID5 (3 disks is the slowest configuration, due to operation RAID 5)

  Create a RAID with all disks and split them into two logical volumes. Volume 1 ~ 10GB (for the OS and a small store of data for example ISO images) and Volume2 for use as a VMFS data store.

  However, my ultimate goal is to have two separate servers, sharing a MSA (using SAS) or SAN, in a redundant configuration.  In this case, I think it would be wise to get the USB now, and then remove the 300 GB drives (and maybe even the raid card), then put the disks in the storage unit.  Any comment?

  This is a possible way to go. In this case you would save the time to reinstall the hypervisor, once you get the MSA. However, for the time until you get the MSA, I prefer the solution only disk and do a new installation later (it usually does not take very long).

  André

• Can someone direct me to resources on how you get TWO esx servers to the same storage array?

  Hi all

  I use:

  2 x Compaq DL380 G2 with 5i

  cards controller 5300 AND attached to the base storage Bay

  STORAGEWORKS ENCLOSURE 4354R RM DOUBLE PORTS U3 (not yet pregnant

  compatibility list).

  The first server appears to see the good in the console of the virtual server storage Center.  The second server will see s for only its own storage room tho.  How do both to see and use the same storage.  The concept is new to me, but trying to learn.  Is there something I need to see the same storage in the virtual Center for TWO machines esx Server?  All IM just not in the right place?  Thank you.

  http://communities.VMware.com/thread/78873 was a previous thread on this can enlighten us. Looks like the 4354R has the bus is divided into 2 x 7 disks and each connector in the back can 'see' 1 of the two buses. The quickspecs (http://h18000.www1.hp.com/products/quickspecs/10624_div/10624_div.html) refer to "... allows access to two areas of storage separated from two different servers. So the first "thing" would be to get two buses attached together inside the unit so that the two connectors on the back see all readers, you must get the endpoint SCSI disabled on the device (you want termination on each 'end' of the cable that is two SCSI adapters in the servers).

  While you might be able to get the 4354R shared between the two ESX hosts, you can also get all the benefits of the shared disk + the possibility of vMotion, etc. by implementing the 4354R known as iSCSI or NFS storage. It also swings you back to something that is 'supported '. To do this, you have two approaches

  1. Fix 4354R on one of the ESX boxes, create a virtual machine that has access to the entire disk on the 4354R and run something like OpenFiler in the virtual machine to 'share' the disk via NFS or iSCSI

  2. Set up a 3rd server if you have one available and run the version of "bare metal" OpenFiler, or install Linux or OpenSolaris distribution and configure NFS and/or iSCSI target.

• I'm trying to set up Robin DNS for both terminal Servers Server on another site.

  Hello

  I'm trying to set up Robin DNS for both terminal Servers Server on another site.
  Our fields are not approved, but accessible through forwarders.
  I created two records as follows:
  xxx.x.XX.12 SRV
  xxx.x.XX.13 SRV
  When I perform an nslookup it lists two IP addresses
  E-mail address is removed from the privacy *.
  xxx.x.XX.12, xxx.x.xx.13
  When I ping srv it alternates between IP addresses
  Response of xxx.x.xx.12 bytes = 32 time = 10ms TTL = 126
  Did I miss something?
  Thanks in advance.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Is it possible to send Radius accounting packets with two different servers?

  Hello experts!

  I have dilemma I send info Radius accounting on two different servers for authentication of the dot1x. Here are the relevent config. However the switch just to send a copy on the first server in the server group...

  RADIUS AAA server Acct group
  ACCT-port of the server 172.17.1.1 auth-port 1812 1813
  ACCT-port of the server 172.17.1.2 auth-port 1812 1813

  accounting dot1x default start-stop broadcast group AAA Acct

  RADIUS-server host 172.17.1.1 auth-port 1812 acct-port 1813 key xxxxxx
  RADIUS-server host 172.17.1.2 auth-port 1812 acct-port 1813 key xxxxxx

  Is it possible to send two copies of two different servers? I tried the key word 'issue' in the aaa accounting command, but it does make a difference. What is doing? I can't find it in the manual...

  Thank you!

  Difan

  Difan,

  You must create two aaa server groups to operate. Allows the sending of accounting records to multiple AAA servers.  At the same time returns accounting records the first server in each group. If the first server is unavailable, the failover occurs using servers defined within this group.

  Accounting AAA broadcast configuration
  The following example shows the turn on broadcast accounting using the aaa accounting global command:

  RADIUS AAA server group isp
  Server 1.0.0.1
  Server 1.0.0.2

  AAA isp_customer radius server group
  Server 3.0.0.1

  AAA accounting network default start-stop broadcast group isp group isp_customer

  host server RADIUS 1.0.0.1
  host server RADIUS 1.0.0.2
  Server RADIUS key key1
  RADIUS-server host 3.0.0.1 key2 keys

  The broadcast keyword causes the start and stop accounting for dot1x connections to be sent simultaneously to the 1.0.0.1 group isp server and Server 3.0.0.1 in the isp_customer group. If 1.0.0.1 is unavailable, Server failover 1.0.0.2 occurs. If the 3.0.0.1 server is unavailable, no failover occurs because backup servers are not configured for the isp_customer group.

  Kind regards

  ~ JG

  Note the useful messages

• Can I set up custody of data between databases already available on two different servers?

  Hi, people

  Can I set up custody of data between databases already available on two different servers? If Yes please can you share the links.

  Host operating system: business Red hat Linux 6.5, 64-bit

  The two DB: Oracle 11.2.0.1

  Thank you

  But my question is that I have already two databases running on two different servers that have different data as well.

  In this case we can able to configuration data guard on these two databases.

  The answer may well be yes or no depending on what exactly you mean. Let me explain... Suppose that my Setup matches your description. I have two database servers, we will call them HOST01 and HOST02. HOST01, I have a database named ORCL1 and HOST02 I have a totally different database named ORCL2. Two databases... two hosts.

  Can I do ORCL2 a physical database ensures for ORCL1? The answer is no, I can't. I can't use another existing database to be one physical standby of another. ORCL2 must be destroyed and ORCL1 copied to HOST02 so that I have a database of duplicate.

  Can I use ORCL2 logical waiting for ORCL1? Yes. However, it would be a rare configuration.

  Can I copy ORCL1 to HOST02 and create a physical standby of ORCL1 on HOST02? And then can copy ORCL2 to HOST01 and HOST01 to provide a physical standby for ORCL2? The answer to both is Yes. You can have the other provide a standby for the guests of the database have sufficient resources to support the primary one and the expectation of the other.

  HTH,

  Brian

• A webgate11g can be used for multiple web servers (ESS)?

  We have a webgate was used for a server of OSH. We need the application on a server of OSH dffierent to protect both by OAM SSO.

  Do we not have to install a new webgate as SST or we can use one of two web servers.

  TIA

  Or treat the app on the second server as a target application that is reverse Proxy through OHS1.

• Synchronize with two remote servers

  Is it possible to use the file manager of Dreamweaver to synchronize a local site with TWO remote servers? I want to be able to synchronize everything on my test server for the client to approve and then synchronize with the server. Only way I can do it is by changing the server in the management of sites window, thought it might be a way to do this in the File Manager window.

  You can switch between the test server and the remote server in the window files expanded with the keys on top. Click the (square icon 2) expand button at the far right of the files tab, and then select the test or the remote server it...

  

• Network for the hypervisor setting option?

  I need some documents, videos, forums, etc...  This explains the features of networking & routing for vSphere 4.1 hypervisor.

  I'm not sure it will work for my configuration.

  I have 1 hypervisor behind 1 router with 1 static IP address and I need to know if I can run several servers that have the same port as my hypervisor requirements.

  How does with some type of NAT or virtual networks?

  Thanks in advance.

  You have all you need to deploy such an environment:

  -Connect your physical host (ESX(I)) to your network/s switch.

  -Your default ESX installation should create a switch virtual vSwitch0

  -Create virtual machines and install / configure the guest operating system. (it will be connected to your vswitch)

  Thus, each virtual machine will have his IP address and your hypervisor will also have another IP.

  Port forwarding/filtering is done as for the physical servers, simply enter the IP VMs (local) and the port that you want to allow/filter.

• How to create ESXi cluster or team two ESXi servers to avoid VMHA of HA?

  Hello world

  The scene is, I have two machines Dell 2950 and want to install ESXi U4 or ESXi 4 on both machines.  The requirement is that I have to install Windows 2 K 8 Server as guest and installing MS SQL Server inside on HOST1 (for example). This will be a production server.  Now I want the APP or database on this to be highly available.  I can mirror whatever say who's here to HOST1 on another machine HOST2 and keep it to fail the course in time REAL.  OR can I team or bonds or group these two hosts using local storage (data warehouses) and without the use of third-party storage (I can't afford VMHA, because it involves SAN and SAN or NAS in turn need fail on).

  In simple terms, the creation of ESXi cluster or team two ESXi servers to avoid VMHA of HA?

  TIA for all your contributions.

  -Nadine

  VnonCP

  Try Openfiler or FreeNas?

  Both will allow you to use the local storage on your ESX as an NFS share.

  Problem is that if your ESX host plant... you have a data store that is dead.

• Management node for two areas located on the same server

  I need help to understand how to set up management node for two areas on the same servers. My configuration is:
  
  Server A:
  AdminServer to area D1
  ManagedServer1 area D1
  ManagedServer2 domain D2
  ServerB:
  AdminServer for domain D2
  ManagedServer1 domain D2
  ManagedServer2 area D1
  
  Just to clarify, D1 and D2 are dev and qa environment. WebLogic configurations and domain are all in different and completely separate folders.
  
  I started a manager based on java node on each server. Managers node configs are in different folders as well. Something is messed up, because it does not work properly. For example when I start nodes on server B Manager, he kills AdminServer for D2.
  
  Can I have that one manager of the nodes in this configuration, and the problem is in the config somewhere?
  I should have a management node on each server for each domain (two per server node managers?)
  
  Sorry if this is a basic trick, I am newbie in the weblogic configurations.
  
  Thank you
  Oleg

  Not sure why you have several domains. A server administrator can manage multiple clusters in a single domain. A domain is just a group admin servers and clusters. You could do something like:

  Server A:
  AdminServer domain D1 with 2 groups C1, C2
  ManagedServer1 cluster C1
  ManagedServer2 cluster C2
  ServerB:
  ManagedServer1 cluster C2
  ManagedServer2 cluster C1

  that would allow you to use only 1 nodemanager by server

  With your current setup, make sure that each of your domains using a Nodemanager port separate from each other. The default value is 5556, so if two of your domains use the same port NM, there will be a problem.

  For example, with your domain name:

  Server A:
  AdminServer to area D1
  ManagedServer1 domain D1 - use port 5556 NM
  ManagedServer2 domain D2 - use NM port 5557
  ServerB:
  AdminServer for domain D2
  ManagedServer1 domain D2 - use NM port 5557
  ManagedServer2 domain D1 - use port 5556 NM

  You will need set the nodemanager.properties and the configuration of the Machine in BOTH appropriate for each administration console. You should be able to run multiple nodemanagers on different ports.

• Utility FNDLOAD between two different servers

  Hi friends,
  For the phase of the UAT of our project, we have a new server (server with RedHat Linux ES4 HP).
  We need to migrate reports form the unfounded (IBM - AIX 5.3 p) server to the new.
  FNDLOAD works between two different servers?
  If not, please tell me the reason why it doesnot work between servers.
  I would also like to know if there is a way to migrate data between two servers.

  As indicated in the documentation, it does not work between servers. You export the metadata and get an output file. Then, you take the output file and transfer it to the new source. Complete with examples, including the necessary part of XDOLoader.

• I bought the app bundle and charged separately for two apps

  Hello.

  This was my first purchase. I bought the boundle app on App Store, ('The Go Collection' for 1 euro) and charged for two applications 2 euros on my bank account. What should I do? And also I have received everything or anything.

  How does show on the purchase of your account history: view your purchase history in iTunes on Mac or PC - Support Apple store or http://reportaproblem.apple.com on your phone? If you have been overcharged (by example part of the load is not a temporary store holding the load, which should be automatically reimbursed by the card issuer in a few days or more: on the payment card's authorization in the iTunes Store - Apple Support) and then contact iTunes support via the site 'report a problem' above