Benefits of SPONTANEOUS power

Similar Questions

• 6 nine DC7900 CMT spontaneously power down and restart

  We just bought 6 new DC7900 Convertible mini towers. I rode 5 so far, 4 with XP and one with Vista. XP boxes have been spontaneously restart. Hereby I don't mean a normal shutdown and restart but they all of a sudden hard powerdown and start to begin. The Vista box has frozen and hard reset necessary. all but one of the boxes has the latest version of the bios, in other words, they are on the last or the bios before that, but they have the symptoms. The XP boxes display a message to save the Dump in the eventvwr, all with exactly the same message;

  The computer was restarted after a bugcheck.  The bugcheck was: 0x100000d1 (0x00000002, 0x00000000, 0 x 00000006, 0xb9e367d4). A dump was saved in the: C:\WINDOWS\Minidump\Mini022309-02.dmp.

  The Vista box does not show a Mini Dump as fair, it froze.

  HP support wants go me through all the normal checks that I do. I just wanted to know if anyone of you have seen what these boxes have been purchased for a quick fix, but turn out to be anything but! I bought HP for reliability but next time, I think that it will be under construction in the House unless they sort this fast!

  Thanks for your help

  Personally, I do not believe that anyone should have to work on a new computer. HP would be on their way to take all of this if it was me. I better not make me started this topic.

  Here's someone with a loved one or maybe the same problem. I note that the error code resembles the same numbers.

  http://forums11.itrc.HP.com/service/forums/bizsupport/QuestionAnswer.do?ThreadId=1295068

  Message edited by dmhoo29 on 02/26/2009 10:48

• MSI - ms 7778 MB: update my system p7-1439

  I have a p7-1439 desktop computer and want to install an AMD radeon RX 480 graphics card is it possible with this system

  @PatrickHenry196, welcome to the forum.

  The video card is made for PCI Express 3.0 x 16.  The video slot on the motherboard is PCIe 2.0 x 16.  While the 3.0 is backward compatible with the 2.0, I am not sure that you will get all the benefits of the power of maps.  I suggest you contact the Technical Support of the manufacturer for this information.  I can recommend it, but I don't want you to spend money to be returned if it does not work.  In addition, you will need to determine if the card will fit in the space provided.  You can do as the back i/o ports to the front of the case.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Curious about the color of determination program and if it can deliver the best final product than the first.

  Looking to hear from form people who have used it. What are the benefits?

  Chalk and cheese... especially in the hands of the right.

  Resolve is a CC / Grade pro application exceeds the scope of the first or speed (as is the case).

  There are many benefits:

  Secondary power masks, mask Tracking, Keying, Nodal, ranking, stabilization,... and...

  Try it for your self.  Watch a video tutorial.

  It of free, but you need the system to operate it and time for a learning curve to use.

  Jerks. Requires a workflow profesional as DI and management of assets through a pipeline pro.

• multi channels data acquisition, a single frequency, counter a pulse, two voltage inputs, a power meter (by USB) and an analog output spontaneous and recording

  Hello

  I have a power meter which provide the USB driver and a Labview program to get the data and NI USB-6221. The project I am currently working on the needs of:

  1 acquire two signals (inputs of simple tension), pressure frequency KHz

  2. acquire a flow signal, the output signal is 0 to 5V pulse, each pulse means 0.4 ml volume. So I use a voltage inflows to count impulses in certain period of time (in this case, 1 S) for water flow. ; KHz sampling frequency and the 1 Hz update rate

  3. acquire a signal of engine speed. The output signal is pulse square wave whose frequency is related to the speed. I use a REIT port to measure the frequency. Sampling rate: Auto

  4 give output voltage sine or square wave, I use AO do that.output rate: Auto

  5 acquiring by VISA electricity meter data.  Data update rate: every 50ms

  Currently, all the 5 tasks work well separately. But when I put them together, some signals are beginning to hang, for example, pressure signals sometimes give nothing.

  Another problem is the data record. I programmed the VI in such a way that whenever I press the button 'save start', he begins to record data and save them in a .cvs file. For some reason, I always get only the data in the first table. Coult someone help me? I download my code as follows

  Hello

  What I meant by open, write, close.  For any type of file you are using.

  Open the file, which produces a reference, then put the mention in a registry to offset.

  Write data, using the function write (for this type of file) and the reference.

  When you are finished, close the file reference.

  Writing in the spreadsheet opens, written, close all at once.  It is very good for this type of application.

  ***

  The issue of the loop is more general.  I would like to say first of all, I want to say that since each loop works on its own, it is own VI, and that this program has put all this into a single VI, which has a method to solve the problem is to disable all the loops and allow them one at a time to see if there is a culprit responsible for.

  Using multiple loops executes the code at the same time, and some loops would be cycle faster than others, especially if some of them are loops just as they are.

  Communication between the loops is a test to the address if necessary.

  Running all these signals through different loops DAQ must also be examined.  Don't know what questions are for read and write somewhat randomly in the channels.

• Satellite P750-R10 - immediate stop - Kernel Power event 41

  Hello

  My son has a Toshiba Satellite R10 P750 and problems of spontaneous closures.
  Looking at the system log, it is a 'kernel Power Event 41"for each occurrence.

  It happened several times today so now it's a major issue, but it's happened for the last 6 months (a total of 21 entries) but spread over time.

  Any ideas on what is wrong or how to fix this?

  Here are the details of the journal:

  + System
  -Supplier
  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41
  Version 2
  Level 1
  Task 63
  Opcode 0
  Keywords 0 x 8000000000000002

  -TimeCreated
  [SystemTime] 2013-01 - 01 T 14: 18:59.960009600Z
  114234 EventRecordID
  Correlation
  -Execution
  [ProcessID] 4
  [ThreadID] 8
  Channel system
  Computer Allansdator
  -Security
  [User name] S-1-5-18

  + EventData
  BugcheckCode 0
  BugcheckParameter1 0x0
  BugcheckParameter2 0x0
  BugcheckParameter3 0x0
  BugcheckParameter4 0x0
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Especially peter

  Hello

  I n t have experience with this but plase check Microsoft document http://support.microsoft.com/kb/2028504

  My personal opinion is that you should back up all important data and reinstall the OS. It is certainly more radical method but also the most effective to solve these problems. After doing this you will own preinstalled OS and everything will be OK again.

• TECRA 8100 stops spontaneously

  I have a 8100 Tecra with Windows XP SP2. The laptop stops spontaneously. Without warning, the screen goes black and flashes green battery LED. The battery is in poor condition (max. power for 5 minutes, then it beeps low battery). Therefore, I have the laptop still plugged into the mains.

  Does anyone have a suggestion how I can solve this problem?

  Greetings, Ben

  Hi Ben

  For the solution, you need to know why this happen. After reading the description of your problem, it is not easy to say why this is happening and we can only speculate what may be the problem.

  The question of a beginning: is this laptop cleaned in the past? I guess this may be full of dust and cooling system and cooling rack may be blocked by dust.
  Without appropriate computer hardware laptop cooling temperature critical and the result is suddenly turned off.

• Satellite M645 - stops down, spontaneously and without provocation

  I bought a Toshiba Satellite M645 running Windows 7

  When I received it I pressed the power button and light, fan would go, the screen would remain offshore, for about 5 seconds, then the light would be off, a click sound and the fan turns off.

  I sent it to the filing of Toshiba and they fixed.

  I came back and it stand up all together cool.

  Then it starts turning off in the middle of using it. Totally spontaneous and not associated with a particular program I use. First, the screen goes black and then one of the few things that happens.

  1. the power light lights up and if I move the mouse quite the screen could return and I will be recorded through the window.

  2. the power indicator turns off and the fan turns off but the computer attempts to turn around. This rarely succeeds and can hear a click after each attempt. I am not anything touching.

  3. the power led turns off and the computer shuts down completely. When can I get back my icons are always rearranged.

  When it closes completely I am greeted by screen "windows off not correctly" or "there was a problem launching windows" repair screen options if I can get a reboot to work. Often after the problem occurs, and I turn the computer back on it will take several times before it seems to 'catch' and load Windows but often I'll push the button, the system begins to start but it won't load that front Windows of the screen and the light turns his back on the wide.

  I've only used this computer on a desk without blockages, so I don't think overheating is likely.

  I sent Toshiba new deposit as this issue did not go far with everything I tried, including antivirus ESET scan. I have only possession for 3 months at this point. I sent and 2 weeks later I come back it with a note "could not reproduce the problem."

  So my last resort and the only thing that has not been tried even from Toshiba is to completely reload windows and factory but I don't know much about computers then before as I do I want to ask.

  Don't you think he has a chance to solve the problem? Ideas to solve this would be great. I'm desperate and do not feel comfortable sending again to "fix".

  Hello

  I recommend to retrieve the laptop using the Toshiba recovery disc.
  To do this, and check if it happens again.
  Theoretically, this could be only a software problem and could be solved by the new installation of the OS.
  But in the worst case, it could be hardware related. which means that you need to get in touch with the ASP guy again you know :(

• Satellite P100-347 - AC power does not

  I thought I'd let everyone know a solution to a problem.

  I used the laptop for long hours and I found it out the next immediately at startup.
  The power supply was not working and prevented from leaving.

  What I did for the solution...

  1. no AC power on, remove the battery.
  2. wait 30 minutes
  3. connect the power cable. (AC power indicator should now light)
  4. start the PC. (it starts!)
  5. turn off the PC.
  6. reconnect the battery.
  7 reconnect the power cable. (AC power indicator should now light)
  8. wait battery light to show his load again. (light blue instead of orange)
  8. start the PC. (it should work now!)

  I really hope that someone benefits from this because I felt with the laptop went I had lost a member.
  I am now happy. I still have that gives more time. But I'm a happy Bunny at OM.

  Price for the repair looked nasty and we talk on the motherboards web gone. Yuukie.

  Looks full of supply circuits switches do not properly with battery and AC. As he would not spend
  Using the battery to use AC the AC was plugged after starting on batteries.

  Carlin

  Yes, that sounds like a motherboard problem. I would like to send the laptop to an ASP for a quote. It could be something as simple as a bad connection.

• Portege R500 spontaneously disconnects without user input

  My Toshiba Portege R500 has a strange problem where it switches off spontaneously without any intervention from the user. This has happened for about 2 weeks in the property and occurs one or two times a day.

  There is no consistency when no why it happens. The machine can be slowed down, or I can run a variety of software. There is no consistency in the software that I have running when this happens. Suddenly, the machine will display dialog box of "logging off" of Windows XP, then start disconnecting. It happens to 'Save settings' scene and then crashes. I then have to force power off and restart the machine. This occurs regardless whether the machine is running off the battery or sector power.

  Appears not to heat related, as I expect heat related problems to simply turn the machine off, not actually go through the procedure of disconnecting. There is nothing in Event Viewer, and it seems not related to a particular software. I tried to recreate my local profile and the problem persists.

  My technical department said that Toshiba support will not resemble this problem unless we try a complete regeneration of the machine first. I think it's a little extreme and would they looked like rather to solve the problem instead of just wipe everything and re - install Windows XP.

  If anyone has experienced this? Any ideas of what could be the cause?

  Thank you
  Derek

  Hello Derek

  Windows XP Home edition is your own installation or you got the Windows XP Home edition recovery media?

  To be honest for this kind of problems is really not easy to find an answer and find no logical explanation can take hours of the investigation. If your case is an isolated case, I don't see any sense to spend so much time and because of that, I can understand the support guys.

  The fact is that Toshiba has to ensure that this recovery image works well. And because of this, they say: do the new installation of Windows XP Home edition and see if the problem persists. At this time where you make the changes on the preinstalled operating system and install a software not supported there is a new situation and it is not easy to simply provide a response to each strange question.

  I'm really interested if someone else will report on the same problem.

  Good bye

• Lenovo G470 keeps stopping during playback of videos for internet spontaneously

  Hello

  I have a Lenovo older G470 of 1 week I've discovered recently guard spontaneously stopping during playback of the facebook/youtube videos. This occurs regardless if I'm on battery or connected to AC power.

  My G470 has an i5 - 2410M with 8 GB memory, ATI Radeon 6370 M and runs Windows 7 Home Premium 64-bit.

  Someone has similar problems? If so is there a fix?

  try the bios flash update and/or to update the drivers for graphics cards.

  http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_list.aspx?CategoryID=792128

• Why does my Net connection disappear spontaneously?

  Recently, I had a problem where very well work my connection to the Internet, then all of a sudden he disappeared. The browser (any browser) gives me messages about being unable to find the server. Remedies, I tried:

  1. by using the option "Repair" of the system tray icon that accesses my Internet connection. Repair always freezes during the disconnection. Furthermore, the option 'Status' says my connection is excellent, but it's probably just between my wireless adapter and the AT & T wi - fi antenna.
  2. unplug the AT & T wi - fi antenna power, wait 30 seconds and in him plugging back in. This is one of the AT & T recommended methods of troubleshooting. Does not work for me.

  Here's what works, and the reason I think that the problem is in my PC and not with AT & T DSL service. If I use the power button before on my tower to completely power off, wait a few seconds, then starts upward, the problem is solved. What hassle.  Oh, the reason why I do not use start > Shutdown is that it has also stopped working. He goes as far as a blue screen and just hangs there.

  For reference, I try to keep my tidy HD. Enough free space, regular defrag, all Microsoft updates, run the tool to check disk with the fix option activated, etc..

  Here are the 12 entries of observer of events leading up to the last spontaneous disconnect from the Internet. I doubt it is useful, because the disconnection occurred at about 09:30, much later than the last recorded event.

  Event type: WARNING
  Event source: disk
  Event category: no
  Event ID: 51
  Date: 04/10/2011
  Duration: 03:10:59
  User: n/a
  Computer: PC
  Description:
  An error was detected on device \Device\Harddisk3\D during a paging operation. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 03 00 68 00 01 00 00 b6... h...¶.
  0008: 00 00 00 00 33 00 04 80... 3.. ?
  0010: 2d 01 00 00 00 00 00 00-...
  etc.

  Event type: WARNING
  Event source: disk
  Event category: no
  Event ID: 51
  Date: 04/10/2011
  Duration: 02:21:52
  User: n/a
  Computer: PC
  Description:
  An error was detected on device \Device\Harddisk3\D during a paging operation. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 04 00 68 00 01 00 00 b6... h...¶.
  0008: 00 00 00 00 33 00 04 80... 3.. ?
  0010: 2d 01 00 00 00 00 00 00-...
  etc.

  Event type: WARNING
  Event source: disk
  Event category: no
  Event ID: 51
  Date: 03/10/2011
  Time: 23:55:45
  User: n/a
  Computer: PC
  Description:
  An error was detected on device \Device\Harddisk3\D during a paging operation. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 04 00 68 00 01 00 00 b6... h...¶.
  0008: 00 00 00 00 33 00 04 80... 3.. ?
  0010: 2d 01 00 00 00 00 00 00-...
  etc.

  Event type: WARNING
  Event source: disk
  Event category: no
  Event ID: 51
  Date: 03/10/2011
  Time: 23:55:43
  User: n/a
  Computer: PC
  Description:
  An error was detected on device \Device\Harddisk3\D during a paging operation. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 03 00 68 00 01 00 00 b6... h...¶.
  0008: 00 00 00 00 33 00 04 80... 3.. ?
  0010: 2d 01 00 00 00 00 00 00-...
  etc.

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Date: 03/10/2011
  Time: 22:02:55
  User: n/a
  Computer: PC
  Description:
  FLEXnet Licensing Service service entered the running state. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Date: 03/10/2011
  Time: 22:02:55
  User: n/a
  Computer: PC
  Description:
  FLEXnet Licensing Service service entered the running state. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 03/10/2011
  Time: 22:02:55
  User: PC\Administrator
  Computer: PC
  Description:
  FLEXnet Licensing Service service was sent successfully a starting control. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: Information
  Event source: Tcpip
  Event category: no
  Event ID: 4201
  Date: 03/10/2011
  Time: 21:26:11
  User: n/a
  Computer: PC
  Description:
  {The system detected that network card \DEVICE\TCPIP_{F92491AD-0D9F-40D0-91DC-38AEFC36B609} was connected to the network and launched a normal operation via the network card.
  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 00 00 00 00 02 00 50 00... P.
  0008: 00 00 00 00 69 10 00 40... I have... @
  0010: 02 00 00 00 00 00 00 00...
  etc.

  Event type: error
  Event source: Dhcp
  Event category: no
  Event ID: 1001
  Date: 03/10/2011
  Time: 21:25:29
  User: n/a
  Computer: PC
  Description:
  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network address 0026F2B066BE.  The following error occurred:
  The operation was cancelled by the user. . Your computer will continue to try and obtain an address on its own from the server network address (DHCP). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 04 00 00 c7

  Event type: Information
  Event source: Tcpip
  Event category: no
  Event ID: 4201
  Date: 03/10/2011
  Time: 21:25:29
  User: n/a
  Computer: PC
  Description:
  {The system detected that network card \DEVICE\TCPIP_{F92491AD-0D9F-40D0-91DC-38AEFC36B609} was connected to the network and launched a normal operation via the network card.
  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 00 00 00 00 02 00 50 00... P.
  0008: 00 00 00 00 69 10 00 40... I have... @
  0010: 02 00 00 00 00 00 00 00...
  etc.

  Event type: Information
  Event source: BROWSER
  Event category: no
  Event ID: 8033
  Date: 03/10/2011
  Time: 21:25:29
  User: n/a
  Computer: PC
  Description:
  The browser has forced an election on network \Device\NetBT_Tcpip_{F92491AD-0D9F-40D0-91DC-38AEFC36B609} because a master browser was stopped. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Date: 03/10/2011
  Time: 21:22:06
  User: n/a
  Computer: PC
  Description:
  The Windows Installer service entered the stopped state. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Date: 03/10/2011
  Time: 21:12:37
  User: n/a
  Computer: PC
  Description:
  The iPod service Service entered the running state. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  As far as I know, there are two problems:

  1 then we need to fix all the errors on the hard drive, and...

  2. for some reason any when I restart or start the PC, it linked to low of a non-secure neighbor connection wi - fi rather than I have here my apt. I reorganized the order of precedence by which Windows searches for a network to connect to, and it works perfectly!

• Lose of power supply for HP Photosmart 4640

  The power cable to the back of my printer HP Photosmart 4640 is loose and wiggles.  The display on the front will blink on and out.  My computer says the device disconnects more often than otherwise and I can't print or frequently scan.  There is now a chronic problem. Do I need to obtain a new power cable and where can I get one? How will I know that it is the connection of the power cable and not the Jack on the back of the printer? Or is it time to invest in a new printer?

  Thank you

  I'll just be completely honest @_Brady_ . I think you hit the nail on the head! Upgrade to a newer model would probably be more worth it.

  Determine if the problem you are experiencing is the cable or the plug may be a bet. You could buy a cable and find you wasted your money, or you could buy the cable and voila! problem solved. BUT, when I look at the printer you have, even if it was great in his time, and that the question of food, it is probably still a good printer, I think you might find yourself a printer of efficiency cost more.

  The newer printers have a better system of ink (my opinion), and they have more ability. They have the ability to print from the mobile device and so on.

  Anyway, I'm certainly not trying to sell you something (I help with technical support, not sale), but I just wanted to be honest. You can go to the user part of HP priced at the cost of a power cable, and you can call HP and see if they can offer you a discount on a newer model. Then, evaluate the benefits of each, and make your own decision!

  http://PartSurfer.HP.com/

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  I hope this helps.

• Can I use a power adapter that provides the samilar voltage but a different amperage?

  Hi all

  The specs for my original AC of a dv6-1355dx adator are:

  Input: 100 ~ 240 V, 1.6 has, 50 - 60 Hz

  Output: 18.5 3. 5 a, V

  756

  The plug of the adapter nearest you, that I could find online of dv6 is:

  Input: 100 ~ 240 V, 1.5 has, 50 - 60 Hz

  Output: 19 V 4.74

  90W

  Can I use it to replace the original one?

  Thank you so much and have a nice weekend!

  Yes, the HP Pavilion dv6-1355dx Entertainment Notebook PC comes with power adapter 65W.

  http://support.HP.com/us-en/document/c01893242

  The 90W AC adapter / you provided has no problem as long as the part fits, there are only two sizes (4,5 and 7. 4 mm).

  To ensure that you get the compatible adapter, take a look at the

  HP 65 w Smart AC adapter

  
  For HP laptops with connectors 4.5 mm or 7. 4 mm

  http://www.shopping.HP.com/en_US/Home-Office/-/products/Accessories/AC-adapters/G6H42AA?HP-65W-smart-AC-adapter

  Here are the following features and benefits to get the Smart AC adapter.

  Smart cards can improve your productivity by feeding your computer laptop while that plugged in, as well as the charge of your battery so that you can take your laptop with you when you disconnect. HP Smart adapters also have built-in overvoltage protection to protect against current fluctuations that can damage your laptop. Help HP Smart adapters you can save on materials, energy consumption costs and travel.

• After the death of firewall router in an outtage power yesterday I replaced my router have restored internet access, but none of my corporate office offices can access our network printer/scanner.

  yerterday morning, that we had a power outage at my place of business. When power has been restored we can't access internet from any one of our desktop computers. After working with a material MFG co troubleshotter. our firewall router NETGEAR, it has been determined that the equipment was defective. They offered to replace the camera for only the shipping charges, I felt an acceptable solution. Then I was told that with bureaucracy, it would take two weeks to get the new unit. Well, my choice was then to set for two weeks and slowly go out of business or buying a new router. I have relpaced the unit with another mod. Netgear router and this quickly got back up again, at least if we could access our system of internal accounting and the internet. My problem is as it is now that I can't access our office network printer.scanner (kyoceraMita) of any one of my desktops. At this point, I'd appreciate any help. I own my business, but am not a computer guy of any measurment known to man. I have this idea, maybe it's a simple software for all fit everyone access to what they need, but I don't know what it is maybe. If sufficient information, in my view, that I could probably fix the problem myself without providing any benefits of outdoor programming.

  The problem now is that the router has changed, the addresses IP, subnet mask, default gateway address, network security wireless network wireless security password and other settings no longer correspond to the original router.  As you said that the SCP can all see each other, you need to see Kyocera and network user's guide 'unit' in order to find the IP address, subnet mask and other network setting the configuration parameters 'method '.