Crash when moving from a structure in a call library function node

Similar Questions

• Windows Explorer crashes when moving from one network to the other card

  Hi people,

  Here's my problem: I suspect his cause and resolution will be very simple, but I can't find an answer until now.

  I use a laptop Windows XP SP3, joined to a domain in native mode Windows 2003.
  As is common these days, the portable computer is multihomed, with a card Intel Gigabit Ethernet and Intel combined 802.11n / Bluetooth adapter.

  My problem is this: I often need to take me off the cable to the office network and join a wireless network. This is how I can access our assets via public IP addresses to avoid NAT issues ' ing. In general, I do this simply by pulling the ethernet cable, then activation of the wireless adapter and join the required network. Note tehre is no firewall or filtering with the wireless network, and it uses NAT.

  In about 10 seconds, Windows Explorer will be locked up for about 15 seconds, then return to life. This behavior is repeated on what seems a fairly short cycle, perhaps every minute.

  While I think it could be linked to the machine looking for domain resources, the command binding adapter or similar, I was unable to make an impact on this behavior.

  If I return the config by disabling my adapter wireless and reconnect the wired adapter, everything returns to normal and performance is as expected.

  I have not tried to change binding adapter - my wireless adapter was higher than the wired NETWORK adapter already but seemed worth - no dice.
  I also tried releasing the config on the wired adapter, DNS and ARP cache flush, and then connect the wi - fi. See no difference.

  I'd love to hear any constructive suggestions how to solve this problem; attempts to use ProcMon and Wireshark for the cause were unsuccessful, but maybe I'm looking at the wrong data.

  Let me know what you might like information and I'll see if I can give him.

  Thank you

  Stevie

  Hi Stevie,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Memory from the Flushing call library function node

  I use the function call library (COLD LAKE) node to load some dll dynamically in a same vi.

  I use a loop for to send the DLL files or a table to COLD LAKE to load the different dll.

  For the first iteration, the COLD LAKE works very well, but for the second iteration and so on can not replace the output variable, and continue to repeat the result of the first iteration.

  Is there anyway to clear the memory of COLD LAKE, so that I will get the correct result for DLL 2nd and so on?

  I understand your message, you have different dll, which returns an array of LabVIEW.

  This table can be of different sizes according to the DLL you are calling.

  I think that you are having a general misunderstand about LV memory management. I think that your comments refer to the data space LV has allocated for the table, this has nothing to do with the DLL itself said!

  LV works memory about conservative. So if you allocated a data space, execution of a new of the same VI will try to reuse this dataspace. So the tables are not released if the VI will slow.

  That being said, the table itself will not reduce its size.

  The only question I have on this: you still have all the available values? If the new call returns the three values (out of 33), is the rest 30 items "the old value"?

  For ANSI C dll - it is common that the DLL also returns a scalar value "arraysize". If you got that, you can use the Array subset function to retrieve valid values.

  Norbert

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

• Win 7 freezes or crashes when moving or copying a file

  Original title: win 7 freezes or crashes when moving or copying from the inside on a file on the hard drive

  Win 7 freezes or crashes when you move or copy the hard drive of the Interior on a file

  Hey Carlos,.

  Check the logs in Event Viewer for any error message when the computer freezes or crashes followed.  See the option of application event (program) for any error message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

  A few things here, you can try and see if it makes a difference.

  1 increase the size of the virtual memory according to the steps in http://windows.microsoft.com/en-in/windows7/change-the-size-of-virtual-memory

  2. run the disk check to make sure that the readers have any errors.

  http://Windows.Microsoft.com/en-in/Windows7/check-a-drive-for-errors

  Note: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data could be lost

  3. run Disk Defragmenter.

  http://Windows.Microsoft.com/en-in/Windows7/improve-performance-by-defragmenting-your-hard-disk

  4 delete the temporary files on the computer.

  http://Windows.Microsoft.com/en-in/Windows7/delete-files-using-disk-cleanup

  5. start a virus on the computer scan to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss

  If none of the help above, then put the computer in a State of boot is a way to check if there is any third party service or program that is causing this issue.

  6 put the computer in a clean boot

  http://support.Microsoft.com/kb/331796

  "Note: when finished troubleshooting, turn the computer back to the normal state by following the steps described in" how to regain a normal Windows startup mode.

  Browse http://windows.microsoft.com/en-in/windows7/optimize-windows-7-for-better-performance to optimize Windows 7 for better performance.

  Let us know if the troubleshooting steps to help you.

• Media Encoder crashes when exporting from Premiere Pro

  Media Encoder crashes when exporting from Premiere Pro. I am the queue several files to export and Media Encoder will crash. The computer system has 32 GB of RAM and videos of export fine in first, but which requires export each individually. Each video file turned down and some can be quite long (more than 3-5 hours). Nothing else is running on the computer that take over memory.

  No idea why Media Encoder will crash?

  Try turning off the GPU acceleration.

• crash when moving objects

  Hey there,

  illustrator, After effects and indesign started crashing when I move objects. After that I restarted it's OK for a while, and then it starts crashing again. I read all the previous threads on this crash when moving issue, but none of the solutions seem to work.

  Using indesign and illustrator CC 2014 on Mac os x 10.10.1.

  any suggestions?

  Thank you!

  Shai

  I found a solution that works, at least for me. I stopped using Chrome and since the problem disappeared. Something about her was causing programs to crash.

• How do Camera Raw to open in PS, when moving from a BRUTE from LR image?

  How do Camera Raw to open in PS, when moving from a BRUTE from LR image?

  I know there must be an easier way.  I can not open no matter what I do.

  Hi RusticDiva,

  Silkrooster is correct on Lightroom. However, if you have Photoshop CC you can use Camera Raw as a filter to make additional changes to Camera RAW:

• Cs6 Dreamweaver crashes when switching from design to live view

  Cs6 Dreamweaver crashes when switching from design to live view

  I'll try later, but I think I may have found the problem. It seems that the cs6 dreamweaver made two files confquration on the same day, but only about 4 hours out. This does not seem normal to me.  Does anyone know why an expensive program like this would do that? Was it a mistake of the operator? I asked the woman who runs this program and she doesn't know anything about the configuration files. Here's what show folders > C:\Users\cyn\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\confiquration, configuration-1

  Post edited by: justbobm202

  Can I please have an answer to the question first, config please

  Post edited by: justbobm202

• Lightroom 2015 5.5 lose selection field legend when moving from image to image

  The latest version 2015 5.5 on mac, broke the ability for lightroom to have the field legend selected when moving the image to the image, to use the mouse to select again the caption field whenever I have switch from one image to another, this is not a major problem but does not slow down subtitle when have to write captions for a large number of images.

  Can it be returned to the next version?

  Please add your vote and detailed opinion to this bug report: 2015.5 Lightroom: don't keep the focus in Keywording boxes or title. Community customer Photoshop family. Even though Adobe has acknowledged the bug, which does not necessarily that it will be fixed in the next version.  Your vote and opinion makes it (slightly) more likely Adobe will give priority to a solution, and you will be immediately notified of updates to the question.

• Pavilion 15-p077TX: my HP Pavilion p077TX 15 notebook freezes when moved from its position

  Whenever I move my laptop from its position, it freezes. As I kept my phone on my bed and I pick it up and place it on my lap then it crashes / freezes. So every time I have to remove the battery and put it again whenever this happens. Sometimes twice a day. It gets really frustrating whenever you do something important. So what I can make of this is that whenever I move the laptop to a certain speed, it freezes, it means that something inside it moves from its ideal location (doesn't happen when I move it very slowly).

  Any cause of definte and the solution?

  Thank you

  Jousset

  Hi @krum02,
   
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15 - p077tx and concerns with closing while moving Notepad. I recommend that you only take the laptop to a repair center to find the part that is loose. You can check your warranty here.

  Please let me know how it goes.

  You can say thanks for trying to help, by clicking on the Thumbs Up below! .

  Thank you.

• Yoga Pro 3 with 10 Windows crashes when moved

  A couple of weeks ago, I did a clean install of Windows 10, and it has worked smoothly since then.

  The last day, Windows 10 has been freezing constantly. After som dig, I realized Windows froze when I moved the laptop (not to shut down or anything like that, just pick up my knees was enough). I tested my theory several times, and whenever I get the laptop to the surface it freezes.

  It only happens in Windows, tried to launch the application of recovery (outside), and I can move the laptop freely without him never freeze.

  Clues?

  Edit: oddly enough, this behavior occurs when the wireless card is enabled in the Device Manager. I can add that yesterday, after the system froze, the wifi adapter missing from Device Manager all together. Had to enable/disable in the BIOS to get it back.

  Not sure if you are happy to hear my answer, but I'm done then try to restore the computer to its factory with Windows 8.1 configuration. Surprisingly, after restoring Windows 8.1, everything worked fine again. No gel, WiFi works fine, everything back to normal.

  After that, I did a clean install of Windows 10, and it now works fine with Windows 10.

  I guess a clean install of Windows 10 would do the trick as well, but I too far on the road that I considered as returned it for repairs. As it's a PC that I use for work, I had to wipe everything before sending it anyway, so I thought that the factory reset could do this job.

• CC of Dreamweaver crashes when switching from mode code in design mode

  I am a recent problem with a file that I am currently working. When I switch from code in the Dreamweaver design view crashes and requires a stop down. Other files seem to work without problem. That particular file has 3 files EdgeAnimation CC cascading which are selected by questions from the media. I can test the page online, but not in design or mode live view.

  As your new page did not plant, which leads me to believe that you have critical errors or conflicts in your other pages.

  Try to run your code through the W3C validation tools.

  • CSS - http://jigsaw.w3.org/css-validator/
  • HTML - http://validator.w3.org/

  Also debug JavaScript.

  JavaScript - http://www.jslint.com/

  Nancy O.

• Emails disappear when moved from junk Inbox, why?

  When I get an email, usually from a friend or someone in my address book, and he's going to the junk e-mail folder, when I try to move it to the Inbox, it disappears. I learned to make a copy of the Inbox, but it is yet to appear. If I move it to another folder, there is no problem, it presents itself. I mark the email as being not junk until I try to move it. I noticed that when I highlight the folders to move, there is no Inbox on the list.

  Ask yourself why he's going to the junk e-mail folder. I think this happens because Thunderbird made a mistake and you have to teach it what is and is not junk to help stop repeating this mistake.

  Mark the message as not junk and this will help reduce the frequency of these evil categorizations and it will result in the message being delivered where it belongs.

  How to mark as legitimate?

  1. You right-click, select Mark as and then not smut.
  2. You can press J (note that tiny j brands like spam, capital J as legitimate brands).
  3. The add-on JunQuilla presents two buttons to your toolbar.

  In theory, Thunderbird not Junk messages from people who appear in your address book. Can you confirm that the senders of these messages appear in your address book?

• I have a popup at the top of the screen when moving from one page to another in some sites that Firefox prevented me from getting to this page, so I have to keep hitting the button "allow." How to prevent this?

  See above

  -> Tap ALT key or press F10 to display the Menu bar

  -> go to the Tools Menu-> Options-> content-> remove the check mark from block pop-up Windows

  -> go to the Tools Menu-> Options-> Security-> place the check on:

  1 warn me when sites try to install 2 modules) block reported attack sites 3) all declared fake web

  -> go to the Tools Menu-> Options-> advanced-> general-> remove the check mark from the warn me when sites Web try to redirect or reload the page

  -> Click OK in the Options window

  Check and tell if its working.