best case for ASUS P6T7

Similar Questions

• Best case for Macbook Pro 13 inch with Retina display

  I was wondering what the best case was for my purchase of a Macbook Pro 13 inch with the retina display. I am a student of the school and will walk to school with her in a compartment of my bag. It might be high everywhere, but he must be not so bulky that I also have school books. Any suggestion?

  If you are specifically looking for a shell, then I recommend the INCASE ones, just go to the apple store and get my things for Mac they have a feeling of fluidity buttered and are pleasant to the touch - as the Apple trackpad - it simply snaps on and snaps off when you want off the coast.  If you are looking for a Holster, I recommend the slim sleeve incase.  It has a soft interior for your mac are not destroyed (its aluminium-what worries you - you did you buy Care, haven't you?) and has a spot for the port of loading.

  I hope this helps!

• Best case for the Droid

  Looking for advice on the case for the Droid.   Bought BodyGlove and quite easily broken top.  Now the lower lid did the same thing.  The ideas people?  Want you are looking for something good, but the study and functional is more important.

  + 1 on the otterbox, big deal that prevent the lint from your ports, back is easy to remove and install, saved my droid several times already.

  skinome is a protective film wrap that fits in the docs and car mount.  Best screen guard, I used but wrap does not give me the need to shock to labour protection.

  Currently using skinome protection screen and OtterBox, removing when mount dock or car.

  Kind regards

  CaptainKGB

• Best disk for my nice new laptop Asus ROG Configuration

  Hey everybody!

  I just bought an ASUS ROG G752VT-GC046D (German Web site link), which has a 1 to 7200 RPM HARD drive. The computer has two empty 2280 m2 slots for disks SSD NVMe. I wonder what is the best configuration of disk while keeping my low costs? I do 1080 p video editing in Premiere Pro (30 FPS and 60 fps) and do a job after effects. I hope that the 4K video editing will be possible on this machine. But 4K is not a must, I would like to keep in mind when selecting disks.

  
  

  Data sheet:

  I7-6700HQ

  GTX 970M 3 GB GDDR

  16 GB DDR4 (2 of 4)

  FHD LED 17.3 "display

  Maniboard: Intel CM236 (Skylake PCH - H) (im not sure at 100%, I found this on another website for G752VT)
  

  3 x USB 3

  1 x USB 3.1 / Thunderbolt
  

  1000 GB 7200 RPM HARD drive

  2 empty slots for disks SSD NVMe M.2

  Discs cannot be configured in RAID
  

  I have a 250 GB SSD 850 EVO in my old computer I can use (currently I use only this disk to edit). Speed reading and writing od 540 MB/s and 520 MB/s, respectively

  Configuration 1

  1 drive: operating system, programs, Pagefile - 128 GB SSD PM951 NVMe M.2 2280 = €65

  2 disc: media, projects - 1 TB 7200 RPM 2.5 "HARD disc

  3 disc: overview, media Cache, exports: 256 GB SSD PM951 NVMe M.2 2280 = €145

  250 GB SSD 2.5 "or sold laying around EVO 850

  Investment = €210

  Configuration 2

  1 drive: operating system, programs, Pagefile - 128 GB SSD PM951 NVMe M.2 2280 = €65

  2 disc: media, projects - 250 GB EVO 850 SSD 2.5 "(slower than PM951) SATA connectors"

  3 disc: overview, media Cache, exports: 256 GB SSD PM951 NVMe M.2 2280 = €145

  4 disc: backups & old projects - 1 TB 7200 RPM 2.5 "HARD disc

  Investment = 210€

  I read the Page Tweakers on the configuration of the hard drive, but I don't know how to apply the knowledge practically while keeping in mind that I am not a super pro user with a huge budget but rather someone who wants to get better, but has a limited budget.
  

  What are your thoughts on my Configurations, do you recommend improvements? Is the Configuration 2 the best bang for the buck (or euro)?

  Looking forward to your answers.

  Best,

  Gorazd

  If you already have the evo 250 GB and you want to use into the laptop

  Disc 1-250 GB samsung 850 evo = os/apps/pagefile/db cache

  Disc 2-512 GB samsung 950 pro = project/media/previews

  Disc 3-1 TB 7200 RPM hard drive = enclosure external usb for backups

  So just buy a disc, the samsung 950 pro and a box external usb 3 for the 1 TB hard drive.

  If you want to keep the internal 1 TB drive, then I think you have to go with two readers of m2. a pm951 of 128 GB or a little better sm951 for os/apps can work.

  Skylake was almost a flop for the gain in performance over the last generation cpu. If new portable computers skylake are good for features such as Thunderbolt, which is good for the expansion or upgrades, including egpu.

• Best material for editing?

  I want to upgrade my computer to edit it. I have an iMac 2011: 2,5 GHz, memory 4 GB, AMD Radeon HD 6750 M 512 MB. I plan to buy another iMac. with a budget of $2500, what would you recommend for best performance for editing? I would emphasise quality video card, memory RAM, or disk (4 cores, 7 carrots, fusion, etc...)?

  Download video card with MOST of the vRAM.  That means generally that you will also get the quad core i7 with Turbo Boost technology (acts like one 8 cores when you need it - and presents itself as 8 cores with MenuMeters.) The 2013 iMac had a 'backdoor' easily add RAM, and if this is always the case - buy an extra set of 16G of Crucial or some other 3rd party and add it yourself - you will make savings (if I remember) about $200.  If I had to start everything, I would have also obtained the reader of the merger, but the internal (regular) hard drive in the iMac Gets a pretty decent read/write speed (about 130 MB/s) but not what you really want with video editing. The proposed internal SSD is fairly low, so, I generally recommend external SSD drives and their construction schedules. USB3 is fast. Love at first sight would be better, but it's still expensive. An SSD in USB3 is quite impressive (I get about 300-400 MB/s R/W for one and 370-435 on the other). You can get a USB3 box for $10-$40 (Amazon has a housing Kdlinks now, limited time, for only $9.95!) and you can find a 500 GB SSD for under $ 200 these days. I bought Crucial SSD (I have a little bit o 'too o' Scottish blood in me), but what I've read, the Samsung EVOs are among the fastest (~500MB/s).

  -VRAM so Max it is possible! (- what it takes to get this top of the line card... graphics you have it.) - and lotsa RAM (you can buy 8 with mac + 16 crucial for 24 which will give respectable service) - fast external drives are a nice addition.

• What are the best deals for an iPad?

  What are the best deals for an iPad?

  That best meets your needs. We do not know what those needs are, it is really not possible to say which cases would be best for you.  I would recommend that search you Amazon for the type of case (business keyboard, leather case, etc.) in which your interests and then read the comments for those who is very much appreciated.

• Best settings for a wireless home network?

  I want to get help on a somewhat complicated setup: my connection in optical fiber gets into my house to a room in the basement. I have a last generation Asus router, which spreads the signal through various Ethernet cables. Wi - fi is disabled, because it wouldn't reach anywhere. Upstairs, I have a new airport time capsule, which creates the main WiFi network for the home. However, it dose not brought into the world. In the box where I want to extend the signal, I have a 5th generation AirPort Extreme (it does not support the alternative signal) connected to an Ethernet jack.

  Now my questions:

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  I hope that I have explained clearly, I'm only half of technology warned, and I am a bit lost...

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  Own configuration of Apple software, AirPort utility you should implement in Bridge Mode time Capsule to avoid a network error called Double NAT. But, ironically, if you call Apple support, they will tell you 'ignore' the Double NAT error and run time Capsule as another router on the network.

  Normally, you can avoid having a Double NAT error on the network, because that might lead to other problems, Apple boards so... If you call them... is controversial. Basically, it seems that Apple wants a router from Apple in charge of both the network possible... not another router.

  So, you will need to decide what advice to Apple you want to try.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  The feedback network option will not work correctly if the Capsule is configured in Bridge Mode.

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  "Extend a wireless network" is used only when the airport connects to another router from Apple using a Wi - Fi connection. Since you will use Ethernet to connect, you would use "create a wireless network" setting.

  But, you won't have to worry about this if you are using Apple Configuration "Wizard" to set up the AirPort Extreme... it automatically applies the correct settings.

• Is CompactRio best solution for me?

  I develop the couple-tour and need to control, hydraulic test machine in addition to saving the graphics of each couple. Control Panel will use the industrial Joystick (to control 5 proportional valves for directional hydraulic) and also requires the adjustment mechanism of pressure/flow (at pressure solenoid control and flow regulators type). Another part is the record - I need to record and report the graphics of each couple, but torque for each individual test values are running user-defined and system should "fire" dump valve very precisely (real time) to the preset torque value (the system will read input load cell) and stop the system once the desired torque is reached. I'll also have in turn against the sensor, sensors etc. of pressure in the system.

  I will definitely use LabView, but I'm not sure whether CompactRIO is the best device for the control and data acquisition in my case or I need something else. I don't know how CompactRIO manages changes to execution and PWM (for the proportional valve controls). Any help will be much appreciated.

  Nash

  
  

• "Structure of case: no case for some values of selector" error

  Hi all

  I'm new to LabVIEW and get an error that I can't get rid of. My code is made up of a state machine with 5 different States. I don't know if this is a common mistake or if I need to provide more information. Please let me know and please help.

  Best regards

  L.E.

  This is explained in the help of LabVIEW: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/specify_default_case/

  You drive the structure of the case of an enum. If you connect an enum, you must provide a case for each enum value or specify a case as in the case of failure to perform if no case matches the value of the enumeration.

  -Or-

  You drive the structure in the event of a string or numeric and do not have a case specified as the default case if no case matches the value in the alphanumeric string.

• What are the best practices for creating only time data types, and not the Date

  Hi gurus,

  We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.

  I would strongly appreciate ideas and suggestions.

  Kind regards
  Ranjan

  Hello

  How do you intend to use the time?

  If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.

  Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average?   If so, the NUMBER would be preferable.

  You are just going to display it?  In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.

  As Blushadow said, it depends.

• DPS: Judge to use the parameter Raster or vector in the States of the objects when the majority of the page is a photo. What is the best setting for the overall performance?

  I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)

  Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?

  I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.

  All tips go ahead?

  Brian

  Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/

• Best Option for 4.1U1 to 4.1U3 upgrade

  I have ESXi 4.1 update 1 currently installed (vSphere Hypervisor). We do not vCenter.

  I'm trying to find the best option for the upgrade of the hypervisor, ESXi 4.1 U1 to ESXi 4.1 U3. I must:

  1 using the Installable version, and once installation is complete, restore the configuration settings using a configuration file saved with PowerCLI?

  2. use a version upgrade from 4.1 U3 with vihostupdate?

  If I go with #2, which download do I need? Thanks for your help. I'm reading the tutorials, but some of it is particularly unclear, in particular upgrade options (rather than clean install) I like to do it if possible.

  Welcome on it community.

  There are a couple of documentation on foot and hollows that explain how patch a single host (for example http://www.vladan.fr/how-to-update-the-esxi-4-1-free-version-to-esxi-4-1-update-1/) in your case just replace the patch bundle with Update--esxi4.1 - 4.1_update03

  Ensure that all virtual machines are (non-suspended) turned off before applying the batch of patches.

  André

• Best practices for SQL

  I started a discussion a few weeks there is movement .vmdks from the supplier of storage to another in regard to and got some great answers.  What I didn't ask was if the hard contain databases SQL is there special considerations when you cut storage EMC VNX (pools versus grpoups raid) or when the data store is created in vCenter.  I know that this may be more an EMC forum question but maybe someone in the world of VMware has a recommendation or can provide a link to best practices for the VNX.  Thank you.

  Post edited by: vmroyale to change the case of SQL

  Have you seen the document "using EMC VNX with VMware vSphere storage solutions"?

• What is the best practice for a 'regular' Server VMware and VDI environment?

  What is the best practice for a "regular" VMware Server and VDI environment?   A single environment (ESXi and SAN) can accommodate two if it is a whole new configuration?  Or even better to keep separate?

  Enjoying inputs.

  Quick and dirty answer is that "it depends."

  serioulsy, it depends really two things budget and IO.  If you had the money for two without then buy two and don't have to host your server environment and the other for VDI desktop, their IO profiles are completely different.

  If this is not the case, try to keep each type of use for their own dedicated LUN.

• What is the best solution for this idea...

  I have a task I'm trying to test and understand what would be the best solution for this, any recommendations would be appreciated.

  Devices at your fingertips:

  -2 ESXi hosts

  -1 iSCSI SAN OpenFiler (new just installed the app)

  2 ESXi hosts run a small amount of virtual machines that are all in the same domain.  I want to have a file server (or a repository somewhere) that houses a folder with easily accessible software (OS, Office, etc.) on the field.

  According to me, that if I made a virtual machine with a large hard drive and share the software, this would not be the best way because it would be dependent on the OS.  Someone has talked about doing a separte VMDK for it and then install it on the operating system on the virtual machine. This way I could always remove the and mount it somewhere else.

  It seems a bit weird to me that the software within this "shared folder" will also be sitting on the data store (if I create a virtual machine and need to use the OS/etc).  Not that doubles the space for the same software (in the comments, then the data store)?

  What is the best approach to make this action which can be accessed at the prompt (mostly windows) in the field?

  What is the best way to stay away the software doubles in action and on the data store?

  Please forgive me if I put interpereted your question.

  The problem you seem to face is that you must mount the ISOs of VMS software and physical systems that are on the field.

  (please, correct me if I'm wrong on this)

  If this is the case, then the best way to do would be to create sharing NFS on the openfiler, if you use openfiler to main databases also then he would be better for sharing this was separated to prevent the other help to be able to tamper with the VMDK and VMX files for your virtual machines.

  This could then be mounted in ESX to access the ISOs. While being easy to install on Linux and Windows machines to access the ISOs.

  If you have questions about NFS mounting in windows, so, this link may help

  http://sagehacks.WordPress.com/2009/01/21/HOWTO-mount-NFS-shares-under-Windows-7

  If you are needing to access the VMs software and it is mainly the downloading ISOs then th ISO directly to the data store is possible.

  This allows you to use ESX to mount the ISO on the virtual machine.

  On the point that the software will use double disk space when you install the software on a machine virtual car will be on the network share and the VMDK virtual machines in the data store. That's right, and that's by design.

  Each virtual machine under ESXI is 'independent' (http://www.vmware.com/virtualization/virtual-machine.html)

  This means that each virtual computer must have its own copy of the application.

  This perspective reflection of each virtual machine as a separate system of 'physical '. They interact with each other as if they were physical systems.

  Each VMDK resembles a physical hard disk. Being accessible (in most configurations) 1 VM at a time.

  So if you had a set of physical systems connected to a domain and I wanted to install an application on each one, then each would have its own local copy of the application. It's the same thing with virtual machines.

  However

  If you configure a set of physical machines so that you run the software from a network share. It is possible to do the same thing using virtual machines using the exactly the same configuration. However, the chiefs more associated to this are important in both cases.

  Concerning

  Cyclooctane