Best method to keep clients updated

Similar Questions

• Best method to update PowerEdge BIOS/firmware offline

  Hi all

  I read in this topic for a week or 2 and trying to figure out the best method to keep all [reasonably] updated, on an independent network. I was recently watching in Dell Repository Manager and it seems that this could be what I need, but I was wondering what other options I might have.

  It is for the most part on a stand-alone network and especially Linx or ESXi

  What are the best options to keep all components up-to-date?

  See you soon,.

  Tim

  Timbo475,

  Depends on the server you use, but you have a few options. If the server is located in a few years, it probably has the lifecycle controller (F10 at startup). If you access that you can go to the updated platform and use the ISO you create Repository Manager to update with.

  Let me know know the server models that you use, and I can clarify.

• Best method for updating CompactRIO data to Server "National Instruments.Variable Engine.1"

  Hi all, I have an OPC Client of third-party I want to use for testing with the CompactRIO. Can I specify 'National Instruments.Variable Engine.1' in the OPC server, create a new item of the mutual FUND, go to a variable and then see its value. I use a CompactRIO and I want to send the updated data that I am acquisitionning of for third-party Client OPC, then, what is the best method? Currently, what works, is that I created a shared variable published to network on the LabVIEW host that I dragged in the CompactRIO project. I've created a small loop increment value every 500ms. I then created on the host computer, a little VI, who issued this national value to "" Instruments.Variable Engine.1". Now, is there a better way to do his? Is it something that can automatically fill in manually the Variable of the CompactRIO motor without publishing the shared inside a LabVIEW application variables? Thank you for your time, best regards!

  Thanks a lot for your replies, Drew,.

  I downloaded the OPC UA API and it will next week.

  Thanks again!

• What is the best method to move from an iPhoto from one Mac to another library?

  What is the I best method for export/transfer my iPhoto on MBP to the iPhoto library library on my iMac? I prefer to keep my metadata intact; I guess that to do a package contents 'show' of my iPhoto and AirDropping the 'masters' library, I won't lose it? I'm under El Capitan 10.11.4 on Mac.

  I just want to explain my situation because maybe I'm missing something. I have SUMMER will use the photo library iCloud for synchronization on all my Apple devices and as a backup off-site. Fortunately, I realized soon as enough it would become a management NIGHTMARE. I downloaded everything from iCloud to my MBP and want to get it all on my iMac, so I can clean up the mess of duplicates and others.

  I couldn't synchronize with realism of the iCloud photo library to my iMac because I would have had to download about 150 + GB of data, so that I can download the 30 or GBs who were on my families iOS devices iCloud and the MBP. ICloud photo library interface is NOT well designed or easy to use - download directly from the cloud is heavy at best.

  All tips are appreciated, thanks.

  Simply connect the two Macs together and drag the library in the pictures of the new mac folder - or use an external hard drive to the Mac OS extended (journaled) format and drag through - then launch iPhoto on the new system

  Move the masters moves original photos and metadata exactly as they were imported without organization

  And iCloud library isn't an option for iPhoto - it requires OS X 10.10.1 and photos 1 or later version

  LN

• Satellite L655 - what is the best method to reisntall ati display driver?

  What is the best method to reisntall ati display drivers as the ati Control Center no longer works.
  It won't work anymore.

  I think that something is going wrong.
  So how to uninstall the entire package and install again.

  Thanks in advance

  Satellite L655 (PSK1JE)

  Go to the page of the Toshiba UE driver.
  Choose the display updated L655 driver
  Download the package, unpack it and run the setup.exe :)

• What is the best way to keep the block diagram / cleaning of façade?

  Hello

  I'm relatively new to Labview so I'm not able to say if I'm overloading my programs or make my too crowded block diagram. I was wondering if there was some ways to tell if I can simplify my programming just by looking (perhaps only experience contributes to these things)?

  I enclose my VI here. Currently, she is able to monitor the voltage and current of two engines. On the screen, you can see an indicator with the voltage and current values and there are cards that can display signals of different engines with a menu drop-down.

  The façade is pretty clean, in my opinion of novice, but the block schema seems messy to me, just at the first glance. I foresee a problem occurring in the future however. In the future, I will have the VI to monitor 50 engines globally. All of the programming will be the same as the one I have now, but it will have 50 indicators and unfortunately 50 times just about everything. I would like to avoid this, but I don't know how I did.

  I use a USB-6009. I use its four differential inputs to monitor the voltage and current of the two engines. In the future, I will get more units DAQ (25 in total because 2 motors can be monitored for each data acquisition). The new Renault will help will help with more resource space, but I think things complicate with the added option of 24 more Assistants of data acquisition (as used in my code).

  Thanks for any help you might be able to provide!

  Usually, it is above all the experience that will teach you the best methods for making your code to do pretty. I don't know anyone who is proud of his first application of claws. There are some resources out there to help with best practices, as that group on ni.com, but you will learn most of your own development.

  Your façade is superb. FPs in general really are to you. You can do it as ugly or pretty as you want. When you have a few controls in duplicate and the Group of indicators, you should use clusters and berries to simplify. You can use a bit of cleanup in this regard, but not much. In addition, I personally hate read red text unless it is a warning any.

  Your block diagram could use a little cleaning in a sense of modularity. You have a lot of repeated code, which you might consolidate in to a Subvi, which is used in multiple locations, or in a loop For. A general rule is to keep your block diagram within a single monitor. You should not scroll. Your application is quite simple, so it is difficult to BUMBLE

  Here are a few details on your block diagram:

  • Click with the right button on your devices on the block diagram and uncheck the "display as icon". You are welcome.
  • Operations on each waveform "(x*2-4)" / 16 in double ": create a Subvi and/or run the waveforms through a loop."
  • You do a lot of 2-element arrays and then indexing. Just replace the ones that have a Select node based on digital.
  • All your code runs every time, including the knots of your property at the bottom, which is not necessary. As you learn LabVIEW architectures, you will learn how to get around this with the initialization and the output of code, but for now, you should put a case around those structure for only when the engine numbers change.
  • I don't know how you're timing your main loop, but you should put a delay in there because you don't need the DAQmx node shoot as fast as your CPU will allow.

  There are videos of intro free that you can watch to learn what OR think in terms of coding and teach you some of the basic features and such. Here's a three-hour course, and here's a six-hour course.

• CRIO best method of logging

  I have an app cRIO to keep track of a timer in hours reboots. The application will almost never stop gracefully (which means that the power of the cRIO will be just unplugged). What is the best method of logging that can be used to keep the last value in a file on the cRIO without corrupting him or lose value.

  I could simply write this value in an INI file every 30 seconds or so, but I don't want to take the risk of someone unplug the cRIO at the precise moment when the file was written to (I know that the chances are slim, but I've seen it happen).

  Any help is appreciated,

  Thank you

  -ACC

  I see two options:

  1 (easy) open a new file every hour. Time stamp of the file name so that you know same between reboots when go to the next file. At least, this limits the damage caused if the system reboots during a file operation. You may even consider to always start a new file after a reboot, even if the last file has been open just a few minutes ago. This would further limit the amount of data lost or corrupted if a file is incorrect. Also, if you use the LabVIEW file IO primtives, consider using the flush after every write to ensure that all data is written to the disk.

  2 (hard) have you heard of SQLite? It is a cross-platform compatible SQL embedded database. It is quite light enough to operate comfortably on your cRIO. The main reason that I bring it to the top is that their transactions are secure and won't corrupt the database (which is really just a file) even in the case of a loss of power in the middle of the transaction.

• Best way to use Windows Update - Primo

  Hello world

  I just did a complete reset of my computer Windows 8.  I want to upgrade to 8.1 Windows since everything is wiped clean.  But first, I have apparently 165 important Windows updates installed.

  The last time I tried to do a reset before Windows Update, it kept "ghost" return.  So I gave up and never tried.

  I have some free time and would really like to do this work.

  Right now, I'm just let do it's thing by downloading everything in bulk and for the best and the worst with the exception of hope so.

  What is the best way to get all the updates to cross?

  NOTE for Windows Customer Service to transmit to one who can do something about it - Windows Update is one of the most AGGRAVATING on Windows things.  I have never run on any computer or OS, I had, but keep the faith that one day that will change.

  Hello Jenna.

  Please keep us updated on the status of the issue.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Have a great day!

• I can't open file of police control Victoria, it keeps saying updating Adobe reader but I have already the latest version. How can I fix it?

  I can't open file of police control Victoria, it keeps saying updating Adobe reader but I have already the latest version. How can I fix it?

  Some PDFs (dynamic XFA forms) created in Adobe LiveCycle can be opened in Adobe Reader and Adobe Acrobat. When you try to open these files in an alternative PDF reader, then you will see this error message.

  Unfortunately, it is not easy to remove this message and change the PDF file so that it can be opened in the alternative PDF viewers. The person who created the original form must recreate the shape using the options that do not restrict viewers PDF can open and view the file.

  Adobe has made the decision that since very few non-Adobe products are supported on these PDF files special, it is best to show this message - and require the user to download Adobe Reader or Adobe Acrobat - that is to let the PDF Viewer try to view the document. You can ask the user to drive - extend documents so that you can view it with Adobe Reader.

  To ensure that the browser is configured to use the software Acrobat Reader plugin, please see KB: configuration of browser using Adobe Acrobat PDF plugin

  Kind regards

  Rave

• Best method of automation by adding a value in the comments advanced options

  I need to add a value in the advanced options in all my virtual machines, which means I have to turn them off, change the configuration and turn on again them.

  I was wondering what is the best method if automate this since I did not intend to do it manually (if this is a bit special virtual machine).

  The environment is vSphere with vCenter 4.1 4.1 and VMs are Windows Server and Linux SLES.

  Somebody had to do something similar?

  Hello, caddo-

  A way to add a setting to a virtual machine is to use a VirtualMachineConfigSpec and the ReconfigVM() of a VirtualMachine object method.  So, for the advanced option that you mentioned, you can use something like:

  ## the name of the VM to reconfig$strMyVMName = "someVM0"$vmMyVM = Get-VM $strMyVMName
  
  ## create a new ConfigSpec to configure the VM$spec = New-Object VMware.Vim.VirtualMachineConfigSpec -Property @{    extraConfig = New-Object VMware.Vim.OptionValue -Property @{        Key = "monitor_control.disable_mmu_largepages"        Value = "TRUE"    } ## end new-object OptionValue} ## end new-object ConfigSpec
  
  ## reconfig the VM with the given ConfigSpec$vmMyVM.ExtensionData.ReconfigVM($spec)
  
  ## update the VM's View data$vmMyVM.ExtensionData.UpdateViewData("Config.ExtraConfig")
  
  ## check the advanced option setting (ExtraConfig item)$vmMyVM.ExtensionData.Config.ExtraConfig | ?{$_.Key -eq "monitor_control.disable_mmu_largepages"}
  

  This establishes the additional configuration for a virtual machine.  You can adjust easily to many/all virtual machines (date you probably pass by using the ReconfigVM_Task() method, which runs asynchronously).  Enjoy.

• Best method to upgrade/migrate vCenter 4.0 to 4.1?

  Hello

  
  I thought a lot about the best method for my server vCenter 4.0 to 4.1 upgrade/migration. I currently have vCenter 4.0 on a * virtual machine * which was a PITA when it comes to maintenance, so I would just stand up a new * physical Machine * and install vCenter 4.1 on it. I want to downgrade the existing vCenter of VM 4.0 altogether and just use this new physical server to manage my host ESX to vCenter 4.1.

  It would be possible to disregard of any * update procedures * and just set up a new vCenter 4.1 from scratch on the new server, or are there no warnings special I should be informed when turning off my server vCenter 4.0 service existing to make appear a new vCenter 4.1 online?

  Any techies VM colleagues help or advice may provide for my scenario will be greatly appreciated.

  Thanks in advance.

  I need to get up my new physical server w / SQL Server 2008;

  Yes

  I need to save my existing vCenter 4.0 DB;

  Yes

  I need to restore my vCenter 4.0 DB from the existing to the new server server then;

  Yes

  Then I need to install vCenter 4.1;

  Yes

  I then copy the directory SSL from 4.0 to 4.1 existing new

  None... You will need to create the directory structure, before installing vCenter.  \ProgramData\VMware\VMware then copy of VirtualCenter to the SSL Directory and then start installing vCenter.

• Best method to make mini spreadsheet

  For my business, I am currently using a spreadsheet to calculate a quote for my clients, but I would change that to an application flex for my Web site.

  I was wondering what would be the best method to achieve this.

  Using a DataGrid with editable columns and a total field similar to my spreadsheet, or text boxes and labels for data (prices) that do not change.

  All welcome ideas, maybe I'm missing an obvious method. Thank you.

  Not difficult, but it takes a while to get there. Here you have some links with examples of what you want to do. I used the same links and I got exactly what I wanted. The key is the property of the AdvancedDataGridColumn labelFunction.

  http://cookbooks.Adobe.com/post_Formatting_summary_data_in_an_Advanced_Datagrid-11471.html

  http://code.seanhess.NET/?p=17

  I hope this will help you!

• What is the best method to do a clean install of El Capitan (currently using Mavericks).

  I want to do a clean install of El Capitan. I am currently using Mavs 10.9.5 and my time machine goes back to 2010. I don't want to migrate everything. I want to start cleaning up. I read a few methods, but I'm curious to know if there is some consensus as to the best method.

  Make sure that you have a Time Machine backup.

  Download El Capitan and do an install from USB.

  Start the installer from USB and install it.

  (Ref - this :)

  http://osxdaily.com/2015/10/01/clean-install-OS-x-El-Capitan-Mac/

• First HP: Best method to solve equations very slightly advanced...

  I always seem to struggle with trying to find a correct and reliable way to do different things with this calculator.  I've stuck with him since they were released at the beginning and I intend to continue to wear for everyday use when I finished my degree.  The problem I encounter is that there are two fairly detailed instructions published or find methods that I do not work for slightly more advanced problems than those in the manuals, etc. of the user.

  Then, I manipulated an equation until the following and I need to solve for alpha without random speculation and 40 different attempts, which is the best method to achieve this?  I tried to plug in this whole equation in the 'Solve' application in different formats, but the number it solves for is always about 0.5 to low or high, in this case I probably have a bad setting somewhere.  I also tried to solve, csolve and orders fsolve in AR but I always get some [[]] as a result.  I guess it's either a mistake or is it which indicates that there are several answers, but where do I go from here?  I was not able to find that [[]] actually means.

  Here's my equation: (sin(2*a)/(2*pi))-(a/pi)+0.75=0, where a = letter Greek alpha.)  The correct answer is 1,986 rad = 113.8 degrees.

  Please help, thanks!

  Sorry Tim, after little sleep and fees starting this morning, I realized that 1) I did not use the appropriate syntax to solve/csolve/fsolve, i.e.: I was not finishing the statement of education and that's why I was getting the [[]].  (2) I realized that when I received a response that was in degrees because I had not turned on my way to radians.  I am all set now and can find the right answer through a number of ways.  Thanks for the reply and my apologies for taking your time.

• Tecra M4 - best method of printing of documents

  that would you suggest the best method of printing of documents etc. would be, when you use the TECRA M4, because there is no printer port.

  Hello

  Many printers or the most recent printer supports only USB port interface.
  But if your printer supports only the parallel port, so you can use cable adapters.
  Check this box:
  http://www.ramelectronics.NET/HTML/usb_printer_cable.htm