Best performance vs value of the processor?

Similar Questions

• C: transfer disc 500 GB external drive and re - install XP for best performance...

  Can I safely move my C: drive to my external 500 GB drive and re-install XP for best performance, and then replace the files & C: files transferred by car to ' puter?

  N ° it will not work. Copy your data to the external hard drive, and then make your own install if that's what you want. But take a look at the "slow computer" information below first. Certainly you should backup your data to the external hard drive regularly even when.

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows

  Some reasons for the slow pace of the computer:

  1. computer has not been maintained - http://www.elephantboycomputers.com/page2.html#Maintenance

  2. the computer is infected with the malware - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  3. the disk is too full. Remove useless stuff, uninstall unused programs. Do not forget to save!
  http://www.elephantboycomputers.com/page2.html#Backing_Up

  4. flaky third party software. Toolbars and modules are particularly guilty in this area. Uninstall toolbars (Google, Yahoo, ISP brand, etc) and look at what modules are in use in your browser (s).

  5. computer has too many unnecessary programs/processes running in the background. Manage your Startup:

  For XP - How to troubleshoot using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  For Vista/Windows7 - Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '. Autoruns is also very useful.

  6. the user runs an inflated/invasive such as Norton and McAfee antivirus program. Replace it with a better program. I recommend NOD32 (commercial) or Avast (free). Avira is also good, but the free version has an unpleasant reminder screen (Google for instructions on how to disable it). The user can also run several real-time antivirus/firewall/security programs.

  7. the user has installed new programs that are processor and/or memory-intensive (Photoshop, AutoCAD, Mathmatica or similar) and does not have the power of the equipment.

  8 drive fails and is in PIO Mode. It's very much slow (like being in 1985). See Hans-Georg Michna here information - http://winhlp.com/?q=node/10

  In addition to the above, see also http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html
  MS - MVP - Elephant Boy computers - don't panic!

• Guidelines for best performance MS SQL server on EQL

  Hello

  Currently, I have a VM that the C: drive of the system as a disk VMDK on a LUN in a table of PS6100XV (24x600GB 15 k SAS drives).
  This logic unit number is shared with other virtual machines.

  The data and logs is on the D: drive which is a MS iSCSI initiator attached volume on the same table of PS6100XV.

  I think to create two volumes on the Bay and move the data and logs to the respective volume. Will this increase performance or it won't make a difference because the table is a part of 24 disks with a pool. What about braces?

  Can I create different pools and put the different volumes on these pools so volumes using different storage arrays which gives best performance? What is the optimal configuration of the eql to host SQL volumes?

  Thank you

  You certainly want to separate EQL volumes for logs and data.   It was a best practice for a long time, with or without virtualization.   The operating system has a queue of SCSI for both of these "readers" since there is in fact only a single drive.

  If you have not already you must configure the EQL MPIO customer volumes and install HIT / ME software, available on the site Web of Equallogic.   That will optimize the I/O of these volumes.

  If you do that a single physical Bay, you can have only one tank.  If you have two arrays of members, you may have one in swimming and one in the other.  There is no way to split a single physical table on more than a pool.

  Kind regards

• ways to increase the performance of the processor

  It might be a silly thing to ask, but I can use a 4 GB USB key to increase the performance of the processor

  during execution of the movies netflix and Amazon to steam. I have 17.4 GB of free space, but then the streaming of the CPU usage is maxed out

  c increace disk space I made the following suggestions given by someone else in the community:

   You can create more free space in C by doing one of the following suggested measures.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  Operating system

  MS Windows XP Professional SP3 32-bit

  CENTRAL PROCESSING UNIT

  Intel Pentium III - M

  Tualatin 0.13 technology

  RAM

  1.00 GB OF SDRAM

  Motherboard

  IBM 2648AU0 (no) 52 ° c.

  Graphics

  ThinkPad TV (1024x768@60Hz)

  S3 Graphics SuperSavage/IXC 1014

  Hard drives

  29.3 GB IC25N030ATCS04-0 (PATA) 47 ° C

  Optical drives

  HITACHI DVD - ROM GD-S250

  Audio

  Intel (r) 82801 CA/CAM AC 97 Audio Controller

  Hello

  Right-click on any video 'flash' and select 'Settings' in the context menu, select the option "use hardware acceleration"...

  You have a graphics card installed... flash videos will / should use his memory for buffering streaming.

  go

  Start > Control Panel > drivers

  or look for updates of your display driver...

  or

  go

  Start > run > dxdiag > display tab, a diagnosis of your display drivers.

• What is the best keep the battery in the best performance?

  Is how better consider keeping batteries for laptops in the best performance: 1-supported always. 2 - Use batteries for laptops without plug in power when the battery is charging.

  Hello

  It makes no difference which way you use because if you keep the AC/DC adapter is plugged in and the battery is fully charged, the battery will not be used. It will only be used if you unplug the AC adapter.

  In addition, a battery can be recharged up to 500 times so I always work with connected AC/DC adapter. But I would say to completely load and unload the battery from time to time. ;)

• Get the best out of Satellite 1900-803 processor / upgrade possible?

  Hi all

  Well, this forum has been great for me up to now, thanks JohnnyS!

  I was wondering if there might be someone out there who can help me with the following problem:

  When I right click on "My computer" (current running winXPpro) I can't see what follows.

  line 1 * Intel (r)
  line 2 * Pentium (r) 4 CPU 1.70 Ghz
  line 3 * 1.69 Ghz, 768 MB RAM

  I guess that the two readings of the CPU speed indicates the maximum speed of the processor (* line 2 *) followed by the actual speed (* line 3 *). If this is the case, can I shake the extra 0.1 Ghz out of it, it is better to it and if the answer to each of these questions is 'yes' then how do I do it?

  Secondly, if I wanted to update (/ replace with a slightly faster) processor would be possible?
  So how high I can go and where I could get such a thing? Should I be careful?

  A big thank you to you experts helping beginners all out.

  Pablo

  Hi friend

  How you´re? Good hope, today I give you another clue (which, I hope, could perhaps help you... or not ;)))

  Your CPU is already underway to * 1.70* Ghz but windows often displays with a few mhz more or less. If you want to know if your CPU is really clocked 1.70 Ghz then download 'CPU - Z', which is a good reliable tool measures on the CPU.

  There should also be a tool that shows the frequency of the processor in real time and you'll see that the frequency of the processor performs constantly at 1.70 Ghz, it s more like a clock generator (which is a CPU) who will * autour * 1.70 Ghz.

  Surely, you can try to upgrade, but here in this forum person won't give you instructions or advice. If you want to know what capabilities can check which chipset is installed, and with these specifications, you should be able to know what CPU probably would take it or not. Research a little bit is never bad ;)

  Here´s a useful link (I hope) for you: http://www.irisvista.com/tech/

  Otherwise, my advice is to 'never change a market system'

  Welcome them

• Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

  Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

  Thank you

  Tunis

  Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

• How to change Performance settings to get the best possible rendering for ArchiCAD12 time

  Custom Baisicaly builc omp, nvid gts250 core ESD 1gig video card, intell Core 2 quad 2.4 GHz, 4gig ram 800 MHz.

  Partner is sitting all night trying to get ArchiCAD12 to work on his laptop computer and a little bit on this computer, everything I want to do is allocate the processor to wor k as it can to make it as well as the power of the graphics card to work more quickly. IM asuming that the ram is used to make the project file, but why can't get to use instead of the processor and graphics card.

  Please help me someone. ID ratehr not spend hours of sevral trying to figure out how to reallocate ram to processor

  Hello Martoglio Mechatronics,

  This is normal and there is no way to reassign the processor to process as much results as the graphics card.

  Your option would be to buy a better graphics card with better performance.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• The speed of the processor 1 group 0 is restricted by the system firmware. The processor has been in this state of reduced performance for 4 seconds since the last report.

  The speed of the processor 1 group 0 is restricted by the system firmware. The processor has been in this state of reduced performance for 4 seconds since the last report.

  Event ID: 37
  Source: Kernel-processor-Power
  Task category: 7

  -What it means and how to fix this?

  : S

  Make sure that the system has sufficient cooling, and that you have upgraded the BIOS most recent.

• I have a HP computer and I try to get the best performance on it

  Dear community,

  I have a HP computer and I try to get the best performance on it, but it does not work. I try to update the drivers and use the memory of storge on USB keys and other stuff like using Microsoft Security Essenticals it is sort of: wered because there is no no way around my problem that way happens to you guys, please I want to just play and have the best performance that I can handle it.

  I think I'll put my memory to 8 GB of Ram or 16 GB of Ram.

  Thanks for your help.

  Original title: Windows 7 HP 2000-369WM

  Hello

  Before upgrade you your RAM, check at HP for the specifications of your computer to see what max amount and type of RAM your motherboard will / can use, or download and run the Crucial Scanner:

  http://www.crucial.com/USA/en/systemscanner

  Also, if you use Windows 7 32 bit, 4GBs is the maximum RAM that can be installed, with the exception of Starter which is 2GBs.

  If you are using Windows 7 64 bit, what are the limits of RAM max for each edition (there is no Starter 64 bit)

  http://Acer.custhelp.com/app/answers/detail/A_ID/2729/~/what-is-the-maximum-amount-of-RAM-memory-supported-by-Windows-7%3F

  Home Basic	8GB
  Home Premium	16GB
  Professional	192GO
  Enterprise	192GO
  Ultimate	192GO

  _________________________________

  And follow these steps to keep your device works properly:

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Best method of automation by adding a value in the comments advanced options

  I need to add a value in the advanced options in all my virtual machines, which means I have to turn them off, change the configuration and turn on again them.

  I was wondering what is the best method if automate this since I did not intend to do it manually (if this is a bit special virtual machine).

  The environment is vSphere with vCenter 4.1 4.1 and VMs are Windows Server and Linux SLES.

  Somebody had to do something similar?

  Hello, caddo-

  A way to add a setting to a virtual machine is to use a VirtualMachineConfigSpec and the ReconfigVM() of a VirtualMachine object method.  So, for the advanced option that you mentioned, you can use something like:

  ## the name of the VM to reconfig$strMyVMName = "someVM0"$vmMyVM = Get-VM $strMyVMName
  
  ## create a new ConfigSpec to configure the VM$spec = New-Object VMware.Vim.VirtualMachineConfigSpec -Property @{    extraConfig = New-Object VMware.Vim.OptionValue -Property @{        Key = "monitor_control.disable_mmu_largepages"        Value = "TRUE"    } ## end new-object OptionValue} ## end new-object ConfigSpec
  
  ## reconfig the VM with the given ConfigSpec$vmMyVM.ExtensionData.ReconfigVM($spec)
  
  ## update the VM's View data$vmMyVM.ExtensionData.UpdateViewData("Config.ExtraConfig")
  
  ## check the advanced option setting (ExtraConfig item)$vmMyVM.ExtensionData.Config.ExtraConfig | ?{$_.Key -eq "monitor_control.disable_mmu_largepages"}
  

  This establishes the additional configuration for a virtual machine.  You can adjust easily to many/all virtual machines (date you probably pass by using the ReconfigVM_Task() method, which runs asynchronously).  Enjoy.

• How to get the value of the textInput component to perform the calculation?

  

  I need some help here... I'm trying to get the value from the user input to the TextInput component that is the age, size and weight to calculate the bmr and display the result in member("result").text.

  How am I suppose to pass the integer in order for me to perform the calculation? If you'd be grateful if someone can help me with this, thanks!

  Here's the formula:

  The equation of Harris Benedict BMR estimates:

  For women: (9.56 x w) + (1.85 x h) - (4.68 x a) + 655

  For men: (13.75 x w) + (5 x h) - (6.76 x a) + 66

  My mistake. You can only re-branded a string to the text property of a text member. Just need to convert the value to a string using the string function.  Use this

  Member ("result"). Text = string ((13.75 * value (member("weightText").text)) + (5 * value (member("heightText").text))-(6.76 * value (member("ageText").text)) + 66)

• Performance issue due to the high utilization of the processor

  I thought that 100% load on the processor maximum fq. So how/why my maximum frequency of i5 is high at 106%?

  Original title: maximum frequency of the processor 106% of reading

  Because your CPU is a feature called turbo boost, which temporarily increases the frequency.

  This is nothing to worry.

• CPU Ready, the processor affinity, and why I don't seem to get the expected performance

  I have a host that is a physical 2 Quad core 2.66 Ghz socket with 10 GB of RAM.  3i ESX 3.5 is installed.  I have only 2 virtual machines on this computer.  Everyone has 4vCPU and 4 GB of RAM.

  When virtual machines are idle and the app is works not only I see low CPU utilization and CPU Ready is a modest 100-200 on each processor.  When the application is not running, the CPU usage rises to about 10,000 MHz as expected.   However, CPU Ready also climbs to 6000-9000ms, which is by FAR more than I expect.

  I have set the processor affinity for one of the virtual machines gets 0-3 and the other 4-7.

  Why CPU ready would be mounted so high?  With only these 2 VM I would expect ready to be almost 0 CPU.

  Remember however each VM has 4 vCPUs with your two virtual machines that you will use all 8 cores as well as the service (which is still running on cpu0) console and vmkernel so there will certainly be contention climb CPU ready time - first question do you really need quad vcpu? You can try a simple vcpu - if you need to start vSMP with dual vcpu virtual - also do NOT set affinity let the vmkernel annex vms approriately

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Best way to set the default values for the form elements

  Hello
  
  I have a form with a lot of defaults that is mentioned below...
  

    Field                      value  
    created by             :APPL_USER
    creation_date         SYSDATE
    last_updated_by     :APPL_USER
    last_update_date    SYSDATE
    item1                     value1
    item2                     value2

  I am currently using calculation-> after presents... then when we create/update a record... these computaion takes place and the default value for the inserted values get... THIS WORKS PERFECTLY WELL.
  
  I want to know... If this approach is fine OR we can have a better approach to achieve...?
  
  Thank you
  Deepak

  Hello

  I think it's good if it fits your need.

  But why you have these fields in the form?
  created by: APPL_USER
  CREATION_DATE SYSDATE
  last_updated_by: APPL_USER
  last_update_date SYSDATE

  The user can enter the ones?
  I thought that those who are to audit and I would fill those drop with trigger in the database.
  So that you get the same "correct" values if you need to manipulate the data with example of sql client

  BR, Jari