Guidelines for best performance MS SQL server on EQL

Similar Questions

• Drive options T110 II for better performance of SQL Server.

  I am building a development machine that will run Win Server 2008 and MS SQL 2008. About 10 developers use it. functions of database pretty standard with each DB about 20 GB in size. I'm going to spec an E3-1230 and max the RAM to 32 GB but not sure that the best option for disk.

  As this is a dev machine I don't need her to be elastic, no need to mirror, but I have speed and space for a budget.

  I need at least 2 TB of space but the better and happy to put in 2 or even 4 discs, I understand chassis will have 4.

  I'm not sure I know is if I should the modern fast SATA drives and connect 4 of them to the motherboard?

  I was not able to discover what is the chipset of the motherboard and if it supports 3 Gbps or 6 GB/s speeds.

  I know there is a map available H200 and would that be born if necessary, but I think that does support only 2 discs and not sure so if it will coexist with 2 connected directly to the motherboard. Also, I found in the past, these cards controller Dell add resilience but are sometimes older slower technology so may be slower than 6 GB/s, or even plugged directly 3gbps.

  Our DBA SQL like as many spindles as possible, but which reduces flexibility and even if it was appropriate, when the disks were the bottleneck, I think they are faster now then perhaps it is useless if the controller/bus now is the bottleneck?

  Advice please it who's boss?

  Waterman,

  The T110 II uses the latest Intel C202 chipset and supports the Xeon processor E3-1200 product family.  You can use the H200 or S300 controller for this server limitations to the S300 is that its Windows only.

  The server can support 4 hard drives cabled them, either to the Council or to the controller. Onboard SATA ports are valued at 6 GB/s: http://www.intel.com/content/www/xa/en/chipsets/6-chipset-c200-chipset-datasheet.html page 200.  You won't win any show using a controller. Internal memory is limited to 12 TB.

  Hope that answers your basic questions.

  Kind regards

• C: transfer disc 500 GB external drive and re - install XP for best performance...

  Can I safely move my C: drive to my external 500 GB drive and re-install XP for best performance, and then replace the files & C: files transferred by car to ' puter?

  N ° it will not work. Copy your data to the external hard drive, and then make your own install if that's what you want. But take a look at the "slow computer" information below first. Certainly you should backup your data to the external hard drive regularly even when.

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows

  Some reasons for the slow pace of the computer:

  1. computer has not been maintained - http://www.elephantboycomputers.com/page2.html#Maintenance

  2. the computer is infected with the malware - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  3. the disk is too full. Remove useless stuff, uninstall unused programs. Do not forget to save!
  http://www.elephantboycomputers.com/page2.html#Backing_Up

  4. flaky third party software. Toolbars and modules are particularly guilty in this area. Uninstall toolbars (Google, Yahoo, ISP brand, etc) and look at what modules are in use in your browser (s).

  5. computer has too many unnecessary programs/processes running in the background. Manage your Startup:

  For XP - How to troubleshoot using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  For Vista/Windows7 - Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '. Autoruns is also very useful.

  6. the user runs an inflated/invasive such as Norton and McAfee antivirus program. Replace it with a better program. I recommend NOD32 (commercial) or Avast (free). Avira is also good, but the free version has an unpleasant reminder screen (Google for instructions on how to disable it). The user can also run several real-time antivirus/firewall/security programs.

  7. the user has installed new programs that are processor and/or memory-intensive (Photoshop, AutoCAD, Mathmatica or similar) and does not have the power of the equipment.

  8 drive fails and is in PIO Mode. It's very much slow (like being in 1985). See Hans-Georg Michna here information - http://winhlp.com/?q=node/10

  In addition to the above, see also http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html
  MS - MVP - Elephant Boy computers - don't panic!

• Activate connections encrypted for the database engine (SQL Server Configuration Manager)

  Hi team,

  I have a quick question, on the protocols for properties of SQL. Option:

  SQL Server Configuration Manager > SQL Server Network Configuration > Protocol for SQL_xxx (right click) > properties, we can see two tabs:

  Tab 1: flags

  Tab 2: certificate

  If I put the value of Instance of hide = Yes, 'Force Enctyption', the fact must be set to YES as well?

  Or Enctyption of the Force must be activated in order to hide the instance?

  What is recommend settings?

  I can see there are good article, but would appreciate if a response.

  https://msdn.Microsoft.com/en-us/library/ms191192.aspx

  Thank you

  + Moin

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Change monitor VM CPU / MMU for best performance?

  People,

  I'm about to deploy new features of Windows Server 2008 R2 (Remote Desktop Session Host / RDSH) virtual machines to support 50 + a simultaneous RDP access.

  To control the virtual machine CPU / MMU may be a good idea to boost performance?

  Here is the setting that I mention that I left by default, but don't know which option to click to enable console vSphere:

  

  do I need to restart the virtual machine to change the option greater than the background value or something else?

  and also, it's the model of VMhost CPU type:

  

  any kind of comments would be greatly appreciated.

  Thank you.

  Assuming that AMD - V is enabled in the BIOS of your host, the automatic setting for Windows Server 2008 R2 on your CPU will be AMD - V with IVR.  In most cases, this will give you the best performance.  However, for young LBR is much more expensive with IVR with shadow paging.  If your workload is a TLB buster, you might want to switch to AMD - V with shadow paging.  On the other hand, the page table updates are much more expensive with pagination shadow with IVR.  Thus, even if your workload is a TLB buster, it might be better to use IVR if your workload also has a high frequency of updates of page table.

  Binary translation is rarely a victory.  However, there are rare cases, such as the work of Windows XP 32-bit workloads that rub on the TPR, where the binary translation surpasses hardware-assisted virtualization.

  The only way to be sure that you have selected the best mode is all benchmarks.

  Yes, you don't have to restart the virtual machine to change the execution mode.

• 84 40007 error code update could not be installed for the service of SQL Server 2008 (KB2285068) Park

  I'm at my wits end trying to install it, I even downloaded a program called RUN mircosoft told me (via their help center) to find & fix problems with updates, I noticed some stuff on other accounts on my laptop to tell me to this day, the Comet 12mth service has been paid for , but they help her, please help, I'm pulling my hair out, thanks to all those who can, I'd be so grateful, also thanks to those who helped me with my last problem (you know who you are) you helped me a lot of time

  Try posting in the SQL Server Setup & Upgrade forum for assistance:http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads/>

• How to solve problems online datamove for 1 of 3 SQL Server 2008 migration.

  I have 3 databases SQL Server 2008 I need to migrate to Oracle 11 g 2 with data only. For all the databases that I can capture, convert and deploy the database target. I can also do this with success a data movement for 2 databases online. The third database runs for about 2 hours and gives a message that the migration completed with success, but not a single line of any of the tables invades. How to understand what failed. I see nothing in the reports with SQL Developer (3.2.20.09). To save time and since I'm only interested in the tables, indexes, and data, after capturing the model, I remove developer QL, views, procedures, functions, sequences and triggers before disguised step.

  Hello

  did you remove the views, procedures, functions, etc. of the model only convert to the database where you have the problem or did you do the same for all three database?

  Did you look at the MIGRLOG table in your repository of migration? It contain useful information?

  Concerning
  Wolfgang

• Upgrading RAM for best performance with an Intel Celeron 2.20 GHz Core good option?

  Hello
  I have an old laptop with Intel Celeron 2.20 GHz (1 Core only), 2 GB of DDR2 RAM.
  I want to install Windows 7 / 8 with no problems (bad perf, etc.);
  -> with programming compilers, editor of photo/video/audio or other
  related applications to be run (maybe multitasking).

  is it a good idea to update my RAM to a superior?
  I have 2 ram slots, 1 one slot is used (2 GB).

  If it's good, what can recommend you?
  If not, are there other solutions? or just buy a new one?

  for now, I have less budget...
  pls help.

  Thank you

  The better question is whether or not your computer accepts more than 2 GB of memory, and if so, what memory support or accept.  Once you have an answer to this question then you need determine if the additional memory will help.  Which would be determined by looking at the performance of the system in system monitoring tools and watching low available memory and/or high swap file usage.

• VMware Clod Migration boot cd for the database Migration SQL Server

  Hi techies,.

  I have a requirement to migrate one of our physical DB server to the virtual machine, it is very important to business so I thought to go with cold cloning with boot cd, but I could not get this cd bootable anywhere... ! can someone help me on this? and also please suggest me there at - it another way, I can do this task successfully with some fails?

  VMware Converter 5.x has the ability work synchronize to power use this run a p2v migration

  (1) perform a P2v full and when its done and you're ready to cut more

  (2) stop the database service and do a synchronizaion and put the virtual machine online

• For best performance, I use tweak 'DISABLE PAGING EXECUTIVE'?

  Hello

  make the final installation of my new office station

  with cs5 production premium and victory 7professional

  I7 - 930, 24 GB of ram ddr3 mushkin, 12 hdd (all raptors of k 10)

  (at this point, I'd rather not RAID)

  Basically, everything has its own drive: os, final render, effects, media cache, previews, "scratch disks", etc.

  2 questions:

  (1) with 24 GB of ram can I still a pagefile?

  (currently I have 1 hdd configuration in the SWAP file)

  (2) using the tweak "disable paging Executive" would help performance?

  again, I have more confidence users adobe Googling for answers...

  Thank you

  j

  1. Yes.  ALWAYS have a pagefile.  It may not be necessary a lot with 24 GB of RAM, but your system may crash hard without her, if it is never actually needed.

  2. I wouldn't worry on this subject.  With that much memory, you're not likely to see much difference.  And Win 7 64 manages memory did MUCH better than XP.  So better to let her do a job without being bothered by the user.

• C 64 Vista 64/security update for SQL server 2005 Service Pack 3 (KB970892) problem code

  I get a request for update update of SQL server 2005, (not even sure if I need the SQL code on my laptop) and it never ends. It errors. It seems to open a box to find a file called (sqlrun_sql.msi) this file does not exist on my system. Unable to reinstall SQL server 2005, it is impossible to uninstall.

  When I try yo install service pack manually the x 86 worm say to use the x 64, x 64 say to use the X 86 worm. ???

  If I do not need SQL server, I would really like to remove it. But how.

  Thanks for any help

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• SQL Server 2008 R2 CPU and RAM requirement for HFM/FDM

  Summary of the problem

  ---------------------------------------------------

  Requirement of SQL Server 2008 R2 for HFM/FDM

  Description of the problem

  ---------------------------------------------------

  We install a new EPM 11.1.2.3 - HFM and FDM on one server that hosts the services of the Foundation and FR. Our question is on the CPU and Ram needed on the SQL Server. We have 2 users with 4 GB of data, but we have to get the good performance of SQL server.

  Please provide me with a white paper link or just tell me what it takes.

  Thanks in advance.

  4 CPUS and 16 GB of RAM should be more than enough to support your needs

• Migration SQL server 2008 SQL server standard, what is the best?

  Good evening

  I need help for a migration to sql server.

  We already have a vcenter 5.1 production installed in Windows 2008 R2 x 64 with SQL Server 2008 express. Our data increase and ourODBC cannot answer for our use. We need to migrate to SQL server 2008 Express in SQ server 2008 standard.

  I have a problem with the software installed Vmware (SSO, Update Manager).

  I have two choices:

  • Install a new Server 2008 R2 with SQL Server 2008 Standard and import datas beetwen current server to our new.
  • Migration on our current server SQL Server Express to the standard.

  What is the best solution?

  Kind regards

  You must check odbc 32-bit and 64-bit. If not mistaken only um uses 64-bit

  Sent from my BlackBerry® smartphone Maxis

• 64C__Vista 64/security update for SQL server 2005 Service Pack 3 (KB970892) problem code

  I get a request for update update of SQL server 2005, (not even sure if I need the SQL code on my laptop) and it never ends. It errors. It seems to open a box to find a file called (sqlrun_sql.msi) this file does not exist on my system. Unable to reinstall SQL server 2005, it is impossible to uninstall.

  When I try yo install service pack manually the x 86 worm say to use the x 64, x 64 say to use the X 86 worm. ???

  If I do not need SQL server, I would really like to remove it. But how.

  Thanks for any help

  You may find the answer on this forum:

  The SQL Server installation & set program at level
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/ TaurArian [MVP] 2005-2010 - Update Services

• support for SQL server

  I have Developer 4.1.1.Does SQL, this access SQL server version support?

  I followed the instructions to download jtds - 1.2.jar. However, I can only see tab for the connection, not SQL server or other Oracle. See the link below
  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/thirdparty-095608.html

  Connect to the SQL Server

  Even I tried to update that recommended in the link above. The deveoper SQL tool crashed. I have to re - install.

  Someone help please?

  Thank you

  The link to the documentation provided is very old, for SQL Developer 1.5.x.  The problem is that the versions jtds - 1.2.x.jar are for use with applications that require older versions of Java to Java 7.  Developer SQL 4.0.x supports Java 7 and 8, while 4.1.x requires Java 8.  Please use jtds - 1.3.1.jar.

  The notification of which versions of Java, the jTDS driver various builds support is... jTDS - SQL Server and Sybase JDBC driver / News

  In this forum, a discussion earlier touch on what versions of SQL Server that we support, and how to use jTDS is... What versions of SQL Server are supported by SQL Developer 4?