best settings for wireless network

Similar Questions

• Best settings for a wireless home network?

  I want to get help on a somewhat complicated setup: my connection in optical fiber gets into my house to a room in the basement. I have a last generation Asus router, which spreads the signal through various Ethernet cables. Wi - fi is disabled, because it wouldn't reach anywhere. Upstairs, I have a new airport time capsule, which creates the main WiFi network for the home. However, it dose not brought into the world. In the box where I want to extend the signal, I have a 5th generation AirPort Extreme (it does not support the alternative signal) connected to an Ethernet jack.

  Now my questions:

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  I hope that I have explained clearly, I'm only half of technology warned, and I am a bit lost...

  1. my Time Capsule should be set to bridge mode, because it is connected to a router? Do not forget that I can't exclude this router because it brings the signal via a cable to other places.

  Own configuration of Apple software, AirPort utility you should implement in Bridge Mode time Capsule to avoid a network error called Double NAT. But, ironically, if you call Apple support, they will tell you 'ignore' the Double NAT error and run time Capsule as another router on the network.

  Normally, you can avoid having a Double NAT error on the network, because that might lead to other problems, Apple boards so... If you call them... is controversial. Basically, it seems that Apple wants a router from Apple in charge of both the network possible... not another router.

  So, you will need to decide what advice to Apple you want to try.

  2. If the answer to the above is Yes, is there a way to establish a network of wi - fi comments?

  The feedback network option will not work correctly if the Capsule is configured in Bridge Mode.

  3. What are the best settings for the Airport Extreme, which is supposed to extend the signal? It is better to create a new wifi network, as it is connected via Ethernet, or should I put it to extend an existing wifi network?

  "Extend a wireless network" is used only when the airport connects to another router from Apple using a Wi - Fi connection. Since you will use Ethernet to connect, you would use "create a wireless network" setting.

  But, you won't have to worry about this if you are using Apple Configuration "Wizard" to set up the AirPort Extreme... it automatically applies the correct settings.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• DHCP is not enabled for wireless network

  Hi all

  I have problems with internet connection and a large part of the time, that Network Diagnostics says Windows "DHCP is not enabled for wireless network", then it solves a problem, but I lose the connection several times a day, and each time that do the same fix again.

  I checked the Device Manager settings and DHCP is started and set to automatic, I also ran CMD > ipconfig/all and can paste the results if need be.

  I use a VPN and never had any prior issued connection with it and it seems to be just as hard to connect if the VPN is enabled or disabled.

  Also recently I got the "security defender" virus which has been deleted successfully, the next day of the day it has been deleted, all network cards have messed up, I uninstalled and reinstalled them but that didn't work so I restored my system and that seems to fix the problem, my computer does not seem to run as fast after the virus as before so I wonder if it has an impact on my current problem.

  I use a Toshiba Satellite Pro 660D and Windows 7.

  Hello

   

  Thanks for choosing Microsoft Community. However the question you posted should be better on the TechNet forums. Please post the question here:

   

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

   

  Don't answer if you need assistance, we will be happy to help you.

• Satellite Pro L450-13 q (PSLY1E) - XP driver for wireless network card

  The system has Windows 7 pre-installed and has Windows 7 recovery DVD.
  I searched online and found that some packages also include Windows XP Professional as a downgrade.

  This was not included in my package, I received.

  I managed to get most of the drivers for XP, including graphics and sound card.
  But at the present time, I have not been able to locate the driver for the wireless card.

  Can anyone help?

  Thank you very much... Mark

  Hi mate,

  I think that you should look for the Toshiba WLAN drivers WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Normally you will find all the drivers for wireless network cards in all laptops Toshiba so it s worth a try! ;)
  Moreover, what WLAN card you have exactly?

• Best settings for the analysis of revenues

  I just bought a HP Officejet 6600 A-I-O. I was looking for a device scan my boxes of documents, so I can unclutter my home office. I would also like to analyze the revenue. I considered the famous 'neat Scanner", but I hesitated to the price tag of $400.

  My question: what are the best settings for the HP scanning application when I'm scanning received? What is the difference between PDF and PDF searchable? IsTIFF a better choice than PDF? Use "Generalist" or something else? Recipes do not need large files high resolution, of course.

  Can someone point me to a guide that explains the different parameters available with the HP Scan application, please. Thank you!

  Hi Caesar3,

  In a regular PDF document, the text looks more like a picture of the text.  We can see it, but the file does not contain the words.

  In an indexed PDF, text is stored as text, so it can be searched.

  http://acrobatusers.com/tutorials/how-to-create-a-searchable-PDF-file

  When you scan receipts, 200 or 300 dpi should be fine.  If you plan to print the stored version receive 300 dpi would work well.

  I recommend PDF more TIFF.  TIFF files can store pages or multiple images in a single file, but access to additional pages is a bit awkward.  Generally, the file size is much smaller with PDF or TIFF.

  The site http://www.scantips.com/ is a good resource.  This is a Web site not HP, but it does not scan HP.

• best settings for kdl-46ve5 briteness, color etc level thank you tv

  What is the best settings for kdl-46ve5 Briteness, color etc level thank you tv

  Hello Tom,

  The default settings in the TV are usually the best settings for the normal display. However, the settings such as brightness, color etc. level must be adjusted based on the comfort of the user. It depends on the user and also the environment watch one. There is no basic rules for the parameters. The settings can be done on a basis of trial and error.

  If my post answered your question, please mark it as "acceptable Solution".

  Thank you for your message.

• Best settings for alpha 58

  Hey I'm new user of digital SLR. I have alpha 58 with 18-55 lens, can someone please tell me what are the best settings for taking good photos outdoors

  Relating to the opening
  Use a mode and put the number of f to a larger number.

  http://d3studio.com.au/

  There are a few fundamental articles explaining the shutter, the opening and ISO what and how they work.

• dv6810us don't Scan for wireless networks

  I have a Pavilion dv6810us notebook running Vista Home Premium. It has the Atheros AR5007 wireless card. There are ten days, he stopped searching for wireless networks. I can only connect to a wireless so I manually enter the SSID and password in manage wireless networks. The connection to a network screen displays the message, "Windows cannot find any additional network." The box at the top right of the screen does not work. The last day, I was able to find wireless networks was at a Starbucks in New York on 29 October. Help, please. Thank you.

  Please do not hold account that last response. I did a Google search and found at www.wefi.com. It works! Thanks a lot for your help. I like the fact that the software gives you a list with icons that tell you if a hot spot is protected or not, so you can see at a glance. Nice work and 1 million thanks!

• Best settings for i7 desktop?

  I installed after effects CC 2014 on a computer with i74790k, Radeon 6850 and 8 GB of RAM.

  The program works well, but it's a little insensitive Windows 8.1, for example, opening and closing files take longer, also browsing the files, open the start menu, etc.

  What are the best settings for the decent edition and stability of office?

  Check your memory and multiprocessing settings. The RAM memory that is reserved for other applications should probably be higher.

  Lönnrot wrote:

  Strict minimum that?

  Minimum requirements according to Adobe:

  • 4 GB of RAM (8 GB recommended)

  According to almost everyone who uses it. The 4 GB is the minimum for it to run. However, you need more than 8 for this to work well. I would consider 16 to a minimum so that it works well, but considering how cheap and it is easy to upgrade RAM, I put more than that in your system if possible.

• Best settings for the export of EI

  Hello

  I wonder what that the best settings for export to EI for installation in first CS5.5. Previously I would scan from a band and would export .avi without loss of EI, but now I use the XDCAM EX 1080 50i on first sequence presets and I wonder if I need to change the parameters of the AE or just keep them as lossless?

  As always, thanks in advance!

  Keep it without loss.

• Best settings for the encoder to 720p@30fps (may - Ann or Jeff B.?)

  I have recommendations for use of Ann and b. Jeff for several months now using cs 4 encoding that can help get the high quality HD on a DVD-video.  Thank you!

  Now, I have a project using 720 p at 30 fps... Jeff online tutorial does not cover 720 p @ 30 fps.

  What are the best settings for my coding export?

  Thank you, Tom B.

  Process the images 720p30 in the same way that you process images 1080 p 30.  The difference with images of 60 p is because the size of the frame * and * the rate had to be adjusted.

  -Jeff

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.

• HP G72: connect my computer hp laptop for wireless network printer (4620 series all-in-one hp)

  I tried several times to connect to my printer wireless in the House and I always feel bogged down in technical language that is foreign to me. Questions asked, like URL, addresses and others and I don't have any idea where to find this info.

  I intend to try and install this printer one more time so mget the specific questions I need answers to, so bear with me please. Will be later.

  delnann

  While we're waiting to hear from you @7delnann7; Although I'm not sure of the question, you are experiencing or questions you have, I suggest running printing HP and Scan Doctor because this may require a very easy to use and useful.  HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source: try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find the key and the box are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message.

• Automatically get new IP settings for the network adapter

  I have a home network with two computers Vista and I have a Vista laptop for work.  Where my work laptop is home it does not automatically connect to the internet, similarly if I want it.  When I go to network and sharing on laptop computer center it displays icons for the laptop, my home and internet network.  Threre is a X red between the network icon and the internet.  If I click on the red X a pop-up window indicates that Windows checks the problem.  Then a box will appear with several options, one if which is automatically "get new IP settings for the NIC 'Wireless Network Connection'.  When I click on a window pops up that says repair, and after a brief interval, she announced that the problem has been fixed, and it was fixed.

  How can I configure things so that she will do it automatically without this manual intervention.  There must be some way because I have never asked a password or permission to continue.

  If I turn off the laptop and then turn it back on a few moments later, the network connection is still there.  The problem occurs when I try again a few days later.

  Thank you.

  P.S. I tried to submit this a couple of days, but it does not appear under my son, so I don't know what happened.  If the previous post is without me being able to find I apologize.  I don't like having to type things, that's for sure. Jim

  Thanks for the reply.  I did it.

  I'm not sure it would fix the problem however, because the problem occurs after a day power off and power back up a few days later.  So presumably the power to the network adapter has been disable for power off intervals.

  Something happened tonight when I put under tension.  Asked me to confirm something on the network (unfortunately I can't remember what) and after that, I was connected to the internet - without having to go through the manual process described with my problem.  So maybe something has been reconfigured will correct the problem. Jim