best way to digital audio output on 6400?

Similar Questions

• I want to find the digital audio output on my Pavilion vd6853ea notebook

  I spent far too long trying to find where this output.

  I have a very good stereo and at the moment am through a USB cable to connect to my DAC.

  It seems that there is an output digital realtec somewhere on the laptop as it appears not when I go to the playback devices and it tests ok visually.

  The 3.5 jack plug is just analog and hybrid not a spdif.

  Where is he?

  Please help as I am getting really fed up now!

  Hello

  macapaca666 wrote:

  I thank very you much for the quick response.

  I thought that might be the case.

  Can I ask you a few more questions please?

  If I want to get one don't output digital audio not using a HDMI (my DAC has not this entry), I can get a good result with something like a Musical Fidelity V USB converter S/Pdif link or a digital audio interface M2Tech Hiface? Sorry, I can't make a recommendation on one of these products as I am not familiar with them.

  Is it possible to change the soundcard with optical or coaxial output? The sound of your laptop is an integrated solution. It's a (built-in) welded chip on the system board. It cannot be updated.

  Thanks again for the kind help!

  John

  Best regards
  ERICO

• No Digital Audio output when Internet Streaming on STR-DA5700ES

  I have a STR-DA5700ES I bought precisely because it has a digital Toslink out.  I used to use this connection on old receivers to connect to my Sony MDR-DS6500 7.1 headphones.  The headset unit accepts a digital Toslink connection to listen to the audio Dolby Digital.

  I can listen to Dolby Digital happy when I watch TV, because it generates the audio of the Toslink out and my helmet.  However, when streaming a movie Internet through the STR-DA5700ES with audio 5.1, it comes out not audio for the Toslink on.

  Am I missing something here?

  Hello

  Unfortunately the receiver works as expected and will not digital audio (HDMI or optical) from all the internal dissemination services. The receiver expects that you will use it connected speakers to listen to surround audio, or the taking of headset available on the front. There is not a firmware update available or planned that the receiver has been designed to work this way and can be changed by modifying the software.  Keep in mind that it is impossible to get 5.1 surround sound 2 headphones to listen to the speakers, the surround effect is 'Virtual' or 'simulated '.  As a work around you can use a media player that allows an external output optical to your TV if it offers streaming services, or head Jack on the front of the receiver that was planned for this exact purpose. I'm sorry for the inconvenience that this has done and have relayed concerns to the right team

• Digital audio output F10-122

  can I use hearphone released as an audio output and connect it to an ampl home theater to hear 5.1 DVD? I received the logitech 5500 kit, that can accept a cable coaxial, optical and analog.

  Hello

  I found the information that your device output S/PDIF optical Audio line. In my opinion, it should be possible.

  Check this interesting subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229

  Good bye

• Best way to use audio

  I build a project where each slide features a single piece of audio. Audio / narration was imported as background music, and it seems to work very well even if I don't have the ability to pause/stop the audio timeline as background sound continuously.

  In general, it is better to have the audio 'attached' to a button than as background music?

  It is usually best to attach an audio clip of storytelling separate for each slide.  The background to the project (if any at all) audio is generally used for the background music playing or a loop behind the voice-over.

  Captivate has many options for adding audio.  But each of the different options are designed to meet a different design solution.

  Audio fixation to a button would be used when you want an audio clip to play when the button is clicked.  So in this case, you set the event on the success of the button to perform an action to play Audio.  (If you attach the audio object button itself then the audio would play as soon as the button has become visible on the timeline and not when it was activated.)

• No sound from Digital Audio output

  I have a HP Pavilion 1230n, which worked well for me.  Initially, I thought that I had plugged my Boston Acoustic to this computer speakers when I got it, but I am not sure.  in any case the sound works fine through the Green Plug little connects it to my stage monitors.  When I plug in my external speakers to the Digital socket Audio Out I get nothing, I tried to leave the monitor speaker plug and it out.  I get nothing in my external speakers.  I don't see anything in the system that helps me determine if I need to activate the audio digital or not, or how to turn it on.  I have Realtek AC97 Audio.  Please can someone help?  HP wanted $50 to diagnose and trouble shooting with me for once, because it's and the old system.  Thanks in advance to anyone who helps.

  Go to control panel-> sounds and click the recording tab, then right click of the mouse to view devices disabled or disconnected. Do the same for the reading tab.

  If you are still having problems then go to www.realtek.com for the latest audio driver.

  The Realtek HD Audio Manager in the control panel should show a TAB digital output. But as mentioned above, non-digital speakers using SPDIF output is not going to work.

• Dolby Digital Audio output via HDMI on Satellite A200 cable?

  I don't see how to get a Dolby Digital signal on my laptop!

  I have a screen LCD HD 1080 p television. With the help of a cable HDMI from laptop to TV gives a beautiful image. I then use an optical link between TV and Surround amplifier... However the amp does not recognize the signal as a Dolby Digital signal.

  The record is not clear on issues of Audio. The Toshiba HD-DVD player shows Dolby Digital option and I guess that's out put down the HDMI cable? I hear through the TV speakers.

  Hints would be much appreciated.

  Concerning
  Paul

  Hello

  To be honest I didn t know that there is Satellite A200 laptops with HDMI output. Can you please tell me what A200 you have (A200-xxx)? Are you really sure have an A200?

  Back to your problem: as far as I know the Digital Dolby audio can be sent if the laptop has S/PDIF port. You must also use an optical cable and connect laptop to your amp directly.

  What you do now is send the signal to the TV only. I don't really know if you can browse the Dolby signal to the amp.

• Best way to record audio from my Mac?

  I want to record audio from YouTube on my Mac - what is the best method?

  I remember I used to connect my iPad to my Mac via a cable, play on my iPad and record audio on my Mac, but I don't remember the steps I took to make (it was perhaps with Audacity).

  Your method seems to require too much work.  I like this soft- http://www.mediahuman.com/youtube-to-mp3-converter/

• analog audio output and digital optical

  I just bought a 500-214 with IDT High Def Audio CODEC Pavilion / DTS Sound +.

  Is it possible to get opitcal of audio output digital and analog (speakers/headphones) at the same time?  Stereo amp needs access both to the multizone/source function.  I can manually choose one or the other before the reading - it is clumsy that when audio of of active switching devices will turn off, but a passage to not always light up.  But I really need both active simultaneously for amp work properly.  I also found jack rear speaker to be more stubborn while headphones jack front of switch.

  Hi zombi1,

  Welcome to the HP Forums!

  I did some research on whether or not we can use the analog or digital audio output at the same time, and it is unfortunately not possible.

  Thanks for posting and happy Earth Day!

• Toshiba digital audio out coaxial 48L5445DG - only 2 channels

  Hello!

  I use the coaxial digital audio output to connect with my Toshiba 48L5445DG receiver. I want a 5.1 sound, but all what I get TV is 2 channel, receiver shows just how many channels, even if the receiver could convert the sound into 5.1.

  I understand that TV should also show the program containing 5.1, I found some programs, as well as video files playing from the USB - only 2 channels.

  I tried to play the same video file to sony PS3 connected to the same receiver with optical cable and the Sony PS3 comes 5.1 signal.

  > I tried to play the same video file to sony PS3 connected to the same receiver with optical cable and the Sony PS3 comes 5.1 signal.

  Stand by. This sentence confused me. What video files? I thought you have the problem when you watch regular television program. Do you watch movies stored on USB?

  On my receiver, I have three different settings (DSP) sound mode:
  -stereo
  -Dolby surround
  Mode - SFC

  According to the mode chosen receiver will send sound to speakers on both of them or 5 + 1 only.

• Digital audio problems on Satellite A300 (PSAGCA-06M01N)

  Hey,.

  A few weeks ago I noticed that my laptop is announced with the audio digital. I looked through the sound options of Windows, he told me it is in the front. After a lil' googleing I found out mini-Toslink (optical 3.5 mm).
  I bought a cable, it is plugged in, does not work.
  Made sure the drivers have been installed, everything seems to go well here.
  Tested cable in my computer friends, cablings.

  So now I don't know where to go from here?
  For me, it seems that the socket or the plug inside is broken, because when I plug a normal headphone jack into the port, it pops up a message saying something just got plugged, however is not with the optical cable.

  Someone at - it there HD Audio works on any similar Toshiba? Or does anyone have any ideas as to why it may not work?

  Thanks for any help!

  Hello

  Not all A300 are equipped with a digital audio output
  However, if you are sure that your laptop supports this feature then it should be possible to operate

  You must make sure the digital output was chosen as default in Control Panel-> sound-> the Read tab.

  If the digital audio output will not appear in the sound options then you must right-click and must check if both options are enabled; Show hidden devices and show disabled devices.

• What is the best way to Sync Output (TTL) digital with analog output?

  I'm trying to generate analog signals that synchronize the rising edge of a digital signal (TTL). The ttl will be the trigger for the camera. The advice I have is USB-6343 X. In my project, I used a clock as a ttl so I can give frequency easily. Could someone tell me what is the best way to accomplish this task? My project seems to work, but I hope it has more neat way. Thanks in advance for any help!

  Kind regards

  Eric

  Hi Econg,

  They should be nanoseconds, if any, there is a trigger of material goes with a hardware clock.

• Satellite Pro P300 best exit way to get audio for blu - ray player or projector

  Hello

  Would be great if someone has experience on the following points.

  I have a Satellite Pro P300 - PSPCDA 03 P00D: I would like to know the best option for high-quality audio from this unit to a blu - ray player or an optoma projector. (Or a good way to find the answer)

  The blu - ray player has hdmi (the satellite does not work) and the optoma projector has a 3.5 mm mini-plug.

  The satellite has a sound piece dolby - is it possible to get a feed for audio output dolby?

  Any thought / experience welcome.

  Thanks in advance!

  Hello

  Not sure but I think that the headphone socket supports S/PDIF
  I think you should check the user manual for more information on S/PDIF
  If his support, then you can use it to get the best audio quality

  Also found this doc in the knowledge base of Toshiba
  http://APS2.toshiba-tro.de/KB0/TSB5400YZ0005R01.htm

• Is there a way to have Firefox respects the audio output device by default when it has been modified while Firefox is open?

  I've been a Firefox user for many years and I still use it as my main browser. A problem that has bothered me for years lies in the fact that when Firefox is open and I change my audio output device by default, Firefox does not respect this change and continues to play audio through the device that was used to originally. Even if you stop the audio and keep playing, does not change the output device.

  Is there a way that this can be configured in Firefox? Now, if I listen to music online (e.g. Soundcloud) I always use Chrome because it is respect changing the default audio output even in the middle of audio playback device.

  Reproduce:

  1. start audio playback (for example a YouTube video; HTML5 and Flash are affected)
  2. change your audio output device by default
  3. audio will continue to play the original output device

  Thank you!

  Hello there is a bug open for that you can vote for: https://bugzilla.mozilla.org/show_bug.cgi?id=698079

• Digital input to Toshiba 46TL-> no analog audio output to amplifier

  Hi all

  When I connect a video source (e.g. computer laptop via DLNA) to my 46TL, output TV audio analog (red/white taken connected to an amplifier) does not work.

  It does, however, watching television.

  Is it possible to configure the TV to read the audio data from digital input (HDMI/DLNA) to the analog output?

  Thank you for the help

  Not quite what series of TLxxx you have, but for example the TL938 supports a digital (optical) audio output port that provides a digital audio signal.
  Why n t connect the amplifier to the TV using this Jack?

  Connectors for component video / audio to the rear of the TV are the ports of ENTRY and not the OUTPUT ports. So, you can send an audio signal to the TV and not the amplifier output.