BI Publisher Format maximum number (xml tag)

Similar Questions

• Format mask number in the XML editor reports

  Hi all

  I have a requirement in the format mask in xml publisher reports.

  I have a field in my report that the quantity,

  1 > if the value is 1234 I need to show as 1 234

  2 > if the value 1234.56 I need to show 1,234.56

  so I tried with properties of form with number format mask ' #, # 0.00' decimal so that's good, but for like number for 1234 also he 1,234.00 impression so I need 1 234, how I can do this, please help me.

  Thank you

  Thank you Deb to clarify. Yes just check the decimal (.) will work.

  I tried with my example of xml data, and it worked.

  Try this now...

• Maximum number of errors to input registers, tried different settings to XML

  Hello
  
  I have a DYNAMIC pivot table where I am getting * "exceeded configured the maximum number of records of entry allowed.."
  
  My report is 20 columns * about 6000 lines so 120,0000. I tried to get both the parameters in bold below to 500,000 does not. I get the same error in the display of the table where the settings is always set to 64 000 lines.
  
  < Center >
  < MaxVisibleColumns > 5000 < / MaxVisibleColumns >
  < MaxVisiblePages > 2500 < / MaxVisiblePages >
  * < MaxVisibleRows > 500000 < / MaxVisibleRows > *.
  < MaxVisibleSections > 5000 < / MaxVisibleSections >
  * < DefaultRowsDisplayed > 500000 < / DefaultRowsDisplayed > *.
  < > 5000000 MaxCells < / MaxCells >
  < defaultRowsDisplayedInDownload > 15000 < / DefaultRowsDisplayedInDownload >
  < / Center >

  Here is my set of the section "views":

  
  
  
  75
  
  500000
  
  fake
  1920000
  5000
  2500
  500000
  5000
  
  

  
  
  75
  
  500000
  1920000
  2500
  500000
  5000
  
  
  140000
  
  
  1000000
  5000000
  
  

• Extract the value between the xml tags in the XML inside the BLOB field

  Hello

  I have a table that contains a BLOB column, this XML file to store column that received from an external source. Now for one of my needs. I need to read that value is the specific XML tag and create the entry in the database.

  Column name	DataType
  ID	Number
  Record	BLOB OBJECT

  This is the XML code that is stored in the file inside the BLOB field format. XML below, I need go get AMC1234 there is after < itemName > text < / itemName > I thought to use XMLTYPE, but unfortunately my DBA team does not XML database, I now use UTL_RAW. CAST_TO_VARCHAR2 and recovery entire string, but I am not able to read actual result it takes. Can someone help me remove AMC1234.

  <? XML version = "1.0"? >

  <! DOCTYPE importFile SYSTEM "xyz.dtd" >

  -< importFile >

  -< importResult >

  < mode status = "DΘFINIR" > general failure < / status >

  < statusCode > 1 < / statusCode >

  invalid < errorMsg > list and holiday component < / errorMsg >

  -< returnInfo >

  < itemName > PRQ < / itemName >

  < Valeurelement > CBA < / Valeurelement >

  < / returnInfo >

  -< returnInfo >

  < itemName > LMP < / itemName >

  < Valeurelement > CBA < / Valeurelement >

  < / returnInfo >

  -< returnInfo >

  < itemName > KEY < / itemName >

  < Valeurelement > 9999 < / Valeurelement >

  < / returnInfo >

  -< returnInfo >

  < itemName > text < / itemName >

  < Valeurelement > AMC1234, FIXED_ALL, RED < / Valeurelement >

  < / returnInfo >

  < / importResult >

  < / importFile >

  
  

  Thank you

  Without
  

  Without - try something like...

  with t as (select"

  -

  -

  General failure

  1

  component and invalid vacation list

  -

  PRQ

  ABC

  -

  LMP

  ABC

  -

  KEY

  9999

  -

  Text

  AMC1234, FIXED_ALL, RED

  "the double pass."

  )

  Select Replace (regexp_substr (col,'([^<>']) itemName))

  , replace (regexp_substr (col,'([^<>""]) Valeurelement))

  t

  connection of level <=> ');

• Date in BI Publisher format

  Hi, I'm new to BI Publisher. How to change the format of date in BI Publisher. I have already 1 format of database, but in the reports that we want to use a different format, how can we do?

  I have already 1 format of database, but in the reports that we want to use a different format.

  data relate to the model through representation of xml data (I omitted the case on the use of csv like data source etc)

  If you have two place for interaction date

  (1) the database in xml format

  (2) the model xml

  so you can form date of case 1 and only to tag for it in the model

  If you want to change the format of the xml representation data you can change in case 2 ( Mathieu Sundarasamy-Oracle (as I prefer) or very little 934101 of path) or in case 1 (change of format mask in the generation of xml)

  so, you have two ways to work with date

  and if you use the first case to dictate using the format mask appropriate for the needs of report production and no more

  but in the second case the new date format based on the representation of the date to xml format

  If you in case 1 and then change the format mask for your needs

  If you in case 2 then post sample xml or try yourself in order to adapt the example Mathon Sundarasamy-Oracle

• Extract the XML tags and insert into the table

  Description:

  XML is under inert atmosphere in the table containing the xmltype column. Need to extract value from xml tag and insert into the table.
  Once the XML record Treaty must update the status as 'Y' in the base table

  Problem:
  There are multiple occurrences of some tags that need to be combined and stored in a single column to delineate the '-'. No. area of occurrence can vary for each record.
  There are a few encrypted column that I managed to convert decoded value. But used select distinct... XMLTYPE...
  GTT table is used to store the intermediate result and decoding and the concatenation of several tags occurred using TWG.

  1.No. multiple tag will vary how to extract those and concatenate them into a single column. I assumed his occrrence in 3 for example: < student >
  2. how to set the value NULL if no tag is not present. Tag in XML record number can vary. I know that the complete list of xmltags.
  3 data not found error for some xml documents.

  Kindly Assits how to achieve this.

  version: 11.2.0.3.0

  Table Base: temp_XML

  XML_ID NOT NULL NUMBER (28) - auto-increment using the sequence
  PUBLIC EVENT. Stores the XMLTYPE STORAGE BINARY - XML file
  DATE OF EVTDATE
  STATUS VARCHAR2 (3) DEFAULT ' don't

  Sample XML: Includes all the brands mentioned in the common procedure below.

  <? XML version = "1.0" encoding = "US-ASCII"? >

  "< event xmlns ="http://xmlextrac.test.com/object">."

  < data xmlns = "" >

  < object >

  <>units

  < unit > TLAS < / unit >

  < unit > ATLAS < / unit >

  < / units >

  < receiverNetworks >

  < receiverNetwork > ABSAZAJ0XXXX < / receiverNetwork >

  < / receiverNetworks >

  < correspondentIds >

  < correspondentId > #SWF - ABSAZAJ0XXX < / correspondentId >

  < / correspondentIds >

  < comment >

  < comment / >

  < comment / >

  < comment / >

  < comment / >

  < / comment >

  < memo >

  < memo > 28 < / memo >

  < / memos >

  < tuxedoPriority > 20 < / tuxedoPriority >

  sender <>Mike < / sender >

  < typeReseauId > Message < / typeReseauId >

  < maxRetry > 4 < / maxRetry >

  < msgSecuLevel > CBA < / msgSecuLevel >

  < quantity >

  < amount > 12 < / amount >

  < amount > 34 < / amount >

  < amount > 56 < / amount >

  < / amounts >

  < currencys >

  < currency > $ < / currency >

  < currency > EUR < / currency >

  INR < currency > < / currency >

  < / currencys >

  < msgDateVal > ARST123 < / msgDateVal >

  wder < direction > < / direction >

  < eventType > 113 < / eventType >

  < date > 1407431619 < / date >

  < eventDate > 1407431624 < / eventDate >

  < management > R < / direction >

  < msgRef > R950140807AB6CBE < / msgRef >

  < format > SWF < / size >

  < type > 950 < / type >

  R950140807AB6CBE < WALL > < / WALL >

  < bankingPriority / >

  FSDS < field.20 > < / field.20 >

  < texteType > FSS < / texteType >

  < applicationCode > OHS < / applicationCode >

  < company > KETH < / company >

  < endFct > MOE < / endFct >

  < rate > BAM < / flow >

  < subtype / >

  < text > DQo6MjA6R0wxNDA4MDcwMDA1MTMNCjoyNTo3M == < / text >

  < msgHeaders > ezE6RjAxTE9ZRE5MMjBCWFhYMDAzMjAw = < / msgHeaders >

  < msgTrailer > ezU6e0NISzpEOUFFRUNCN0NBQTl9e1RORzp9fQ == < / msgTrailer >

  < / object >

  < / data >

  Procedure: This works very well for a few xml record and fails for some.

  CREATE OR REPLACE PROCEDURE XML_EXTR
  AS
  CURSOR c1
  IS
  SELECT * FROM temp_XML;

  c1_cur c1% ROWTYPE;

  bamdata_sql VARCHAR2 (3000);
  d_text VARCHAR2 (3000);
  d_msgHeaders VARCHAR2 (3000);
  d_msgTrailer VARCHAR2 (3000);
  x_text VARCHAR2 (3000);
  x_msgHeaders VARCHAR2 (3000);
  x_msgTrailer VARCHAR2 (3000);
  x_eventType VARCHAR2 (3000);
  x_amount number (28.2).
  x_currency VARCHAR2 (3000);
  x_state VARCHAR2 (3000);
  x_units VARCHAR2 (3000);
  x_correspondentId VARCHAR2 (3000);
  X_TYPE VARCHAR2 (3000);
  x_receiverNetworks VARCHAR2 (3000);
  x_bankingPriority VARCHAR2 (3000);
  x_applicationCode VARCHAR2 (3000);
  x_processCounter VARCHAR2 (3000);
  x_obsolescence VARCHAR2 (3000);
  x_maxRetry VARCHAR2 (3000);
  x_retries VARCHAR2 (3000);
  x_fileSize VARCHAR2 (3000);
  x_endFct VARCHAR2 (3000);
  x_subType VARCHAR2 (3000);
  x_field20 VARCHAR2 (3000);
  x_sequenceNumber VARCHAR2 (3000);
  x_requestorDn VARCHAR2 (3000);
  x_responderDn VARCHAR2 (3000);
  x_SWIFTNetService VARCHAR2 (3000);
  x_transfertRef VARCHAR2 (3000);
  x_nonrepudiation VARCHAR2 (3000);
  x_transfertInfo VARCHAR2 (3000);
  x_fileDesc VARCHAR2 (3000);
  x_transfertDesc VARCHAR2 (3000);
  x_logicalName VARCHAR2 (3000);
  x_signIndicator VARCHAR2 (3000);
  x_critId VARCHAR2 (3000);
  x_inFapId VARCHAR2 (3000);
  x_deliveryNotif VARCHAR2 (3000);
  x_comment1 VARCHAR2 (3000);
  x_comment2 VARCHAR2 (3000);
  x_comment3 VARCHAR2 (3000);
  x_comment4 VARCHAR2 (3000);
  x_comments VARCHAR2 (3000);
  x_memo1 VARCHAR2 (3000);
  x_memo2 VARCHAR2 (3000);
  x_memo3 VARCHAR2 (3000);
  x_memo4 VARCHAR2 (3000);
  x_msgSecuLevel VARCHAR2 (3000);
  x_dates VARCHAR2 (3000);
  x_tuxedoPriority VARCHAR2 (3000);
  x_fileDest VARCHAR2 (3000);
  x_stkMsgPDEId VARCHAR2 (3000);
  x_EMTId VARCHAR2 (3000);
  x_LTRcptSyno VARCHAR2 (3000);
  x_LTRcpt VARCHAR2 (3000);
  x_LTEmis VARCHAR2 (3000);
  x_flow VARCHAR2 (3000);
  x_FINCopy VARCHAR2 (3000);
  x_msgDateVal VARCHAR2 (3000);
  x_eventDate VARCHAR2 (3000);
  x_typeReseauId VARCHAR2 (3000);
  x_inFapSeq1 VARCHAR2 (3000);
  x_inFapSeq2 VARCHAR2 (3000);
  x_direction VARCHAR2 (3000);
  x_priority VARCHAR2 (3000);
  x_ack VARCHAR2 (3000);
  x_format VARCHAR2 (3000);
  x_mur VARCHAR2 (3000);
  x_TexteType VARCHAR2 (3000);
  x_creatingUser VARCHAR2 (3000);
  x_fileinfo VARCHAR2 (3000);
  x_company VARCHAR2 (3000);
  x_language VARCHAR2 (3000);
  x_ackText VARCHAR2 (3000);
  x_jaxbRef VARCHAR2 (3000);
  x_jaxbElt VARCHAR2 (3000);
  x_memos VARCHAR2 (3000);
  xmlid number (28);
  x_msgRef1 VARCHAR2 (3000);
  x_msgRef2 VARCHAR2 (3000);
  x_msgRef3 VARCHAR2 (3000);
  x_msgRef4 VARCHAR2 (3000);
  x_sender VARCHAR2 (3000);
  x_amlBehavior VARCHAR2 (3000);
  x_ownerServiceId VARCHAR2 (3000);
  x_correspondentName VARCHAR2 (3000);
  x_correspondentAddress1 VARCHAR2 (3000);
  x_correspondentAddress2 VARCHAR2 (3000);
  x_correspondentAddress3 VARCHAR2 (3000);
  x_correspondentAddress4 VARCHAR2 (3000);
  x_correspondentCity VARCHAR2 (3000);
  x_correspondentCountry VARCHAR2 (3000);
  x_correspondentNetworkAddr VARCHAR2 (3000);
  x_tested VARCHAR2 (3000);
  x_correspondentNetwork VARCHAR2 (3000);
  x_validatedPercentage VARCHAR2 (3000);
  x_nbOfValid VARCHAR2 (3000);
  x_requestRef VARCHAR2 (3000);
  x_notifQueue VARCHAR2 (3000);
  x_requestType VARCHAR2 (3000);
  x_secBpid VARCHAR2 (3000);
  x_queue VARCHAR2 (3000);
  x_receiverCode VARCHAR2 (3000);
  x_receiverInd VARCHAR2 (3000);
  x_validFlag VARCHAR2 (3000);
  x_ownerId VARCHAR2 (3000);
  x_dn VARCHAR2 (3000);
  x_RMAOurBic VARCHAR2 (3000);
  x_RMACorrespondentBic VARCHAR2 (3000);
  x_RMAService VARCHAR2 (3000);
  x_fileMsgRef VARCHAR2 (3000);
  date of x_ext_date;
  x_correspondentAddress VARCHAR2 (3000);
  x_msgrefs varchar2 (3000);
  d_ackText varchar2 (3000);
  ackText varchar2 (3000);
  date of x_extdate;

  BEGIN

  FOR C1_CUR IN C1

  LOOP

  INSERT INTO data_GTT_TEMP)
  eventType, amount, currency, State, units, correspondentId, sender, receiverNetworks, bankingPriority, applicationCode, processCounter.
  obsolescence, maxRetry, reminders, fileSize, endFct, xsubType, field.20, sequenceNumber, requestorDn, responderDn, SWIFTNetService, non-repudiation,
  transfertRef, transfertInfo, fileDesc, transfertDesc, logicalName, signIndicator, critId, inFapId, deliveryNotif, comment1, comment2, comment3, comment4,
  Memo1, memo2, memo3, memo4, msgSecuLevel, dates, tuxedoPriority, fileDest, stkMsgPDEId, EMTId, LTRcptSyno, LTRcpt, LTEmis, flow, FINCopy, msgDateVal,
  eventDate, typeReseauId, inFapSeq1, inFapSeq2, direction, priority, ack,
  msgRef1, msgRef2, msgRef3, msgRef4, amlbehavior, correspondentName, ownerServiceId,
  correspondentAddress1, correspondentAddress2, correspondentAddress3, correspondentAddress4,
  correspondentCity, correspondentCountry, correspondentNetworkAddr, tested,
  correspondentNetwork, validatedPercentage, nbOfValid, requestRef, notifQueue,
  requestType, secBpid, xqueue, receiverCode, receiverInd, validFlag, ownerId, dn, RMAOurBic, RMACorrespondentBic, RMAService,
  fileMsgRef, format, xtype, wall, TexteType, creatingUser, fileinfo,
  company, text, xlanguage, ackText, msgHeaders, msgTrailer, jaxbRef, jaxbElt)
  SELECT
  x.eventType, x.amount, x.currency, x.state, x.units, x.correspondentId, x.sender, x.receiverNetworks, x.bankingPriority, x.applicationCode, x.processCounter,
  x.obsolescence, x.maxRetry, x.Retries, x.FileSize, x.endFct, x.xsubType, x.Field20, x.SequenceNumber, x.requestorDn, x.responderDn, x.SWIFTNetService, x.nonRepudiation,
  x.transfertRef, x.transfertInfo, x.fileDesc, x.transfertDesc, x.logicalName, x.signIndicator, x.critId, x.inFapId, x.deliveryNotif, x.comment1, x.comment2,
  x.comment3, x.comment4, x.Memo1, x.memo2, x.memo3, x.MEMO4, x.msgSecuLevel, x.dates, x.tuxedoPriority, x.fileDest, x.stkMsgPDEId, x.EMTId, x.LTRcptSyno,
  x.LTRcpt, x.LTEmis, x.flow, x.FINCopy, x.msgDateVal, x.eventDate, x.typeReseauId, x.inFapSeq1, x.inFapSeq2, x.direction, x.priority, x.ack,
  x.msgRef1, x.msgRef2, x.msgRef3, x.msgRef4, x.amlbehavior, x.correspondentName, x.ownerServiceId,
  x.correspondentAddress1, x.correspondentAddress2, x.correspondentAddress3, x.correspondentAddress4,
  x.correspondentCity, x.correspondentCountry, x.correspondentNetworkAddr, x.tested,
  x.correspondentNetwork, x.validatedPercentage, x.nbOfValid, x.requestRef, x.notifQueue,
  x.requestType, x.secBpid, x.xqueue, x.receiverCode, x.receiverInd, x.validFlag, x.ownerId, x.dn, x.RMAOurBic, x.RMACorrespondentBic, x.RMAService,
  x.fileMsgRef, x.format, x.xtype, x.mur, x.TexteType, x.creatingUser, x.fileinfo,
  x.Company, x.Text, x.xLanguage, x.ackText, x.msgHeaders, x.msgTrailer, x.jaxbRef, x.jaxbElt

  of temp_XML t, XMLTABLE (XMLNAMESPACES ('http://xmlextrac.test.com/object' as "ns0"), ' / ns0:event' )
  PASSAGE t.BAM_EVENT COLUMNS
  eventType varchar2 (3000) PATH 'data, object, eventType' DEFAULT NULL,
  amount number (28.2) path data/object/amounts"."
  currency varchar2 (3000) PATH 'data, object, currencys, currency' DEFAULT NULL,
  VARCHAR2 (3000) path "data/object / / state of ' DEFAULT NULL, State
  units varchar2 (3000) PATH ' object/data/units' DEFAULT NULL,
  correspondentId varchar2 (3000) PATH "data/object/correspondentIds' DEFAULT NULL,
  sender varchar2 (3000) PATH 'data, object, sender' DEFAULT NULL,
  receiverNetworks varchar2 (3000) PATH "data/object/receiverNetworks' DEFAULT NULL,
  bankingPriority varchar2 (3000) PATH "data/object/bankingPriority' DEFAULT NULL,
  applicationCode varchar2 (3000) PATH ' object/data/applicationCode' DEFAULT NULL,
  processCounter varchar2 (3000) PATH "data/object/processCounter' DEFAULT NULL,
  obsolescence varchar2 (3000) PATH ' data/object/obsolescence' DEFAULT NULL,
  maxRetry varchar2 (3000) PATH ' data/object/maxRetry' DEFAULT NULL,
  attempts to varchar2 (3000) "data/object/attempts" DEFAULT NULL path,.
  size of the file varchar2 (3000) PATH ' data/object/fileSize' DEFAULT NULL,
  endFct varchar2 (3000) PATH "data/object/endFct' DEFAULT NULL,
  xsubType varchar2 (3000) PATH "data/object/subtype' DEFAULT NULL,
  field.20 varchar2 (3000) PATH ' object/data/field.20' DEFAULT NULL,
  sequenceNumber varchar2 (3000) PATH "data/object/sequenceNumber" DEFAULT NULL,
  requestorDn varchar2 (3000) PATH "data/object/requestorDn' DEFAULT NULL,
  responderDn varchar2 (3000) PATH "data/object/responderDn' DEFAULT NULL,
  SWIFTNetService varchar2 (3000) PATH "data/object/SWIFTNetService' DEFAULT NULL,
  non-repudiation varchar2 (3000) PATH ' object/data/repudiation' DEFAULT NULL,
  transfertRef varchar2 (3000) PATH "data/object/transfertRef' DEFAULT NULL,
  transfertInfo varchar2 (3000) PATH "data/object/transfertInfo' DEFAULT NULL,
  fileDesc varchar2 (3000) PATH "data/object/fileDesc' DEFAULT NULL,
  transfertDesc varchar2 (3000) PATH "data/object/transfertDesc' DEFAULT NULL,
  logicalName varchar2 (3000) PATH "data/object/logicalName" DEFAULT NULL,
  signIndicator varchar2 (3000) PATH "data/object/signIndicator' DEFAULT NULL,
  critId varchar2 (3000) PATH "data/object/critId' DEFAULT NULL,
  inFapId varchar2 (3000) PATH "data/object/inFapId' DEFAULT NULL,
  deliveryNotif varchar2 (3000) PATH "data/object/deliveryNotif' DEFAULT NULL,
  COMMENT1 varchar2 (3000) PATH ' data, subject, comments, comment [1] "DEFAULT NULL,
  comment2 varchar2 (3000) PATH 'data, subject, comments, how [2]' DEFAULT NULL,
  comment3 varchar2 (3000) PATH "data/object/observations/comments [3]" DEFAULT NULL,
  comment4, varchar2 (3000) PATH ' data, subject, comments, comment [4] "DEFAULT NULL,
  Memo1 varchar2 (3000) PATH "data/object/memos/memo [1]" DEFAULT NULL,
  Memo2 varchar2 (3000) PATH "data/object/notes/Notes [2]" DEFAULT NULL,
  memo3 varchar2 (3000) PATH "data/object/memos/memo [3]" DEFAULT NULL,
  MEMO4 varchar2 (3000) PATH "data/object/memos/memo [4]" DEFAULT NULL,
  msgSecuLevel varchar2 (3000) PATH "data/object/msgSecuLevel' DEFAULT NULL,
  Date varchar2 (3000) PATH ' object/data/date' DEFAULT NULL,
  tuxedoPriority varchar2 (3000) PATH "data/object/tuxedoPriority' DEFAULT NULL,
  fileDest varchar2 (3000) PATH "data/object/fileDest' DEFAULT NULL,
  stkMsgPDEId varchar2 (3000) PATH "data/object/stkMsgPDEId' DEFAULT NULL,
  EMTId varchar2 (3000) PATH "data/object/EMTId' DEFAULT NULL,
  LTRcptSyno varchar2 (3000) PATH "data/object/LTRcptSyno' DEFAULT NULL,
  LTRcpt varchar2 (3000) PATH "data/object/LTRcpt' DEFAULT NULL,
  LTEmis varchar2 (3000) PATH "data/object/LTEmis' DEFAULT NULL,
  flow varchar2 (3000) PATH "/ object/data flow ' DEFAULT NULL,
  FINCopy varchar2 (3000) PATH ' data/object/FINCopy' DEFAULT NULL,
  msgDateVal varchar2 (3000) PATH "data/object/msgDateVal' DEFAULT NULL,
  eventDate varchar2 (3000) PATH "data/object/eventDate" DEFAULT NULL,
  typeReseauId varchar2 (3000) PATH "data/object/typeReseauId' DEFAULT NULL,
  inFapSeq1 varchar2 (3000) PATH "data/object/inFapSeq1' DEFAULT NULL,
  inFapSeq2 varchar2 (3000) PATH "data/object/inFapSeq2' DEFAULT NULL,
  direction varchar2 (3000) PATH 'data, object, direction' DEFAULT NULL,
  priority varchar2 (3000) PATH ' data/object/priority' DEFAULT NULL,
  ACK varchar2 (3000) PATH ' object/data/ack' DEFAULT NULL,
  msgRef1 varchar2 (3000) PATH ' data, object, msgRefs, msgRef [1] "DEFAULT NULL,
  msgRef2 varchar2 (3000) PATH ' data, object, msgRefs, msgRef [2] "DEFAULT NULL,
  msgRef3 varchar2 (3000) PATH ' data, object, msgRefs, msgRef [3] "DEFAULT NULL,
  msgRef4 varchar2 (3000) PATH ' data, object, msgRefs, msgRef [4] "DEFAULT NULL,
  amlBehavior varchar2 (3000) PATH "data/object/amlBehavior' DEFAULT NULL,
  ownerServiceId varchar2 (3000) PATH "data/object/ownerServiceId' DEFAULT NULL,
  correspondentName varchar2 (3000) PATH ' data/object/correspondentName' DEFAULT NULL,
  PATH of VARCHAR2 (3000) of correspondentAddress1 ' object/data/correspondentLine1Addresse' DEFAULT NULL,
  PATH of VARCHAR2 (3000) of correspondentAddress2 ' object/data/correspondentLine2Addresse' DEFAULT NULL,
  PATH of VARCHAR2 (3000) of correspondentAddress3 ' object/data/correspondentLine3Addresse' DEFAULT NULL,
  PATH of VARCHAR2 (3000) of correspondentAddress4 ' object/data/correspondentLine4Addresse' DEFAULT NULL,
  correspondentCity PATH VARCHAR2 (3000) ' object/data/correspondentCity' DEFAULT NULL,
  correspondentCountry PATH VARCHAR2 (3000) ' object/data/correspondentCountry' DEFAULT NULL,
  correspondentNetworkAddr PATH VARCHAR2 (3000) ' object/data/correspondentNetworkAddr' DEFAULT NULL,
  tested VARCHAR2 (3000) PATH ' data/object/tested' DEFAULT NULL,
  correspondentNetwork PATH VARCHAR2 (3000) ' object/data/correspondentNetwork' DEFAULT NULL,
  validatedPercentage PATH VARCHAR2 (3000) ' object/data/validatedPercentage' DEFAULT NULL,
  nbOfValid PATH VARCHAR2 (3000) ' object/data/nbOfValid' DEFAULT NULL,
  requestRef VARCHAR2 (3000) PATH ' data/object/requestRef' DEFAULT NULL,
  notifQueue PATH VARCHAR2 (3000) ' object/data/notifQueue' DEFAULT NULL,
  requestType PATH VARCHAR2 (3000) ' data/object/requestType' DEFAULT NULL,
  secBpid PATH VARCHAR2 (3000) ' object/data/secBpid' DEFAULT NULL,
  xqueue PATH VARCHAR2 (3000) ' data/object/tail' DEFAULT NULL,
  receiverCode PATH VARCHAR2 (3000) ' object/data/receiverCode' DEFAULT NULL,
  receiverInd PATH VARCHAR2 (3000) ' object/data/receiverInd' DEFAULT NULL,
  validFlag PATH VARCHAR2 (3000) ' object/data/validFlag' DEFAULT NULL,
  ownerId PATH VARCHAR2 (3000) ' data/object/ownerId' DEFAULT NULL,
  DN VARCHAR2 (3000) PATH ' data/object/dn' DEFAULT NULL,
  PATH of VARCHAR2 (3000) of RMAOurBic ' object/data/RMAOurBic' DEFAULT NULL,
  PATH of VARCHAR2 (3000) of RMACorrespondentBic ' object/data/RMACorrespondentBic' DEFAULT NULL,
  PATH of VARCHAR2 (3000) of RMAService ' object/data/RMAService' DEFAULT NULL,
  fileMsgRef PATH VARCHAR2 (3000) ' object/data/fileMsgRef' DEFAULT NULL,
  ackText varchar2 (3000) PATH "data/object/ackText' DEFAULT NULL,
  format varchar2 (3000) PATH "data/object / ' DEFAULT NULL,
  xType varchar2 (3000) PATH ' data/object/type' DEFAULT NULL,
  Wall varchar2 (3000) PATH ' data/object/wall' DEFAULT NULL,
  texteType varchar2 (3000) PATH "data/object/texteType' DEFAULT NULL,
  creatingUser varchar2 (3000) PATH ' data/object/creatingUser' DEFAULT NULL,
  fileInfo varchar2 (3000) PATH ' data/object/fileInfo' DEFAULT NULL,
  VARCHAR2 (3000) path ' data/object/society' DEFAULT NULL, the company
  VARCHAR2 (3000) text ' data/object/text' DEFAULT NULL path.
  xLanguage varchar2 (3000) PATH ' data/object/language' DEFAULT NULL,
  msgHeaders varchar2 (3000) PATH "data/object/msgHeaders' DEFAULT NULL,
  msgTrailer varchar2 (3000) PATH "data/object/msgTrailer' DEFAULT NULL,
  jaxbRef varchar2 (3000) PATH ' info/jaxbRef' DEFAULT NULL,
  jaxbElt varchar2 (3000) PATH "jaxbElt/info") x
  where t.XML_ID = c1_cur. XML_ID and t.status =' no;

  Select x.text, x.msgHeaders, x.msgTrailer in x_msgTrailer, x_msgHeaders, x_text of
  temp_XML t, XMLTABLE (XMLNAMESPACES ('http://xmlextrac.test.com/object' as "ns0"), ' / ns0:event' )
  PASSAGE t.BAM_EVENT COLUMNS
  text varchar2 (3000) PATH data/object/text"."
  msgHeaders varchar2 (3000) PATH "data/object/msgHeaders,"
  msgTrailer varchar2 (3000) PATH "object/data/msgTrailer.
  ) x
  where t.XML_ID = c1_cur. XML_ID;
  Select sysdate in double x_extdate;

  
  d_text: = utl_raw.cast_to_varchar2 (utl_encode.base64_decode (utl_raw.cast_to_RAW (x_text)));
  d_msgHeaders: = utl_raw.cast_to_varchar2 (utl_encode.base64_decode (utl_raw.cast_to_RAW (x_msgHeaders)));
  d_msgTrailer: = utl_raw.cast_to_varchar2 (utl_encode.base64_decode (utl_raw.cast_to_RAW (x_msgTrailer)));
  -d_ackText: = utl_raw.cast_to_varchar2 (utl_encode.base64_decode (utl_raw.cast_to_RAW (ackText)));

  Select
  EventType, amount, currency, State, units, correspondentid, sender, receivernetworks, bankingpriority,
  applicationcode, processcounter, obsolescence, maxretry, reminders, filesize, endfct, xsubtype, field.20, sequencenumber, requestordn,
  responderdn, swiftnetservice, non repudiation, transfertref, transfertinfo, filedesc, transfertdesc, logicalname, signindicator,
  critid, infapid, deliverynotif, comment1, comment2, comment3, comment4, memo1, memo2, memo3, memo4, msgseculevel, dates, tuxedopriority, filedest,
  stkmsgpdeid, emtid, ltrcptsyno, ltrcpt, ltemis, flow, fincopy, msgdateval, eventdate, typereseauid, infapseq1,
  infapseq2, direction, priority, ack, msgref1, msgref2, msgref3, msgref4, amlbehavior, ownerserviceid, correspondentname, correspondentaddress1, correspondentaddress2, correspondentaddress3, correspondentaddress4,
  correspondentcity, correspondentcountry, correspondentnetworkaddr, test, correspondentnetwork, validatedpercentage, nbofvalid,.
  requestref, notifqueue, requesttype, secbpid, xqueue, receivercode, receiverind, validflag, ownerid, dn, rmaourbic, rmacorrespondentbic, rmaservice, filemsgref,
  acktext, format, xtype, wall, textetype, creatinguser, fileinfo, society, text, xlanguage, msgheaders, msgtrailer, jaxbref, jaxbelt
  in
  x_eventtype, x_amount, x_currency, x_state, x_units, x_correspondentid, x_sender, x_receivernetworks, x_bankingpriority, x_applicationcode, x_processcounter,
  x_obsolescence, x_maxretry, x_retries, x_filesize, x_endfct, x_subtype, x_field20, x_sequencenumber, x_requestordn, x_responderdn, x_swiftnetservice, x_nonrepudiation,
  x_transfertref, x_transfertinfo, x_filedesc, x_transfertdesc, x_logicalname, x_signindicator, x_critid, x_infapid, x_deliverynotif, x_comment1, x_comment2, x_comment3,
  x_comment4, x_memo1, x_memo2, x_memo3, x_memo4, x_msgseculevel, x_dates, x_tuxedopriority, x_filedest, x_stkmsgpdeid, x_emtid, x_ltrcptsyno, x_ltrcpt,
  x_ltemis, x_flow, x_fincopy, x_msgdateval, x_eventdate, x_typereseauid, x_infapseq1, x_infapseq2, x_direction, x_priority, x_ack, x_msgref1, x_msgref2,
  x_msgref3, x_msgref4, x_amlbehavior, x_ownerserviceid, x_correspondentname, x_correspondentaddress1, x_correspondentaddress2, x_correspondentaddress3,
  x_correspondentaddress4, x_correspondentcity, x_correspondentcountry, x_correspondentnetworkaddr, x_tested, x_correspondentnetwork, x_validatedpercentage,
  x_nbofvalid, x_requestref, x_notifqueue, x_requesttype, x_secbpid, x_queue, x_receivercode, x_receiverind, x_validflag, x_ownerid, x_dn, x_rmaourbic,
  x_rmacorrespondentbic, x_rmaservice, x_filemsgref, x_acktext, x_format, x_type, x_mur, x_textetype, x_creatinguser, x_fileinfo, x_company, x_text,
  x_language, x_msgheaders, x_msgtrailer, x_jaxbref, data_GTT_TEMP x_jaxbelt;

  x_memos: = x_memo1 | » -'|| x_memo2 | » -'|| x_memo3 | » -'|| x_memo4;
  x_comments: = x_comment1 | » -'|| x_comment2 | » -'|| x_comment3 | » -'|| x_comment4;
  x_correspondentAddress: = x_correspondentAddress1 | » -'|| x_correspondentAddress2 | » -'|| x_correspondentAddress3 | » -'|| x_correspondentAddress4;
  x_msgrefs: = x_msgRef1 | » -'|| x_msgRef2 | » -'|| x_msgRef3 | » -'|| x_msgRef4;

  BEGIN

  
  insert into donnees_xml
  (xml_id, x_ext_date, eventtype, amount, currency, State, unit, correspondentid, sender, receivernetworks, bankingpriority, applicationcode,
  ProcessCounter, obsolescence, maxretry, reminders, filesize, endfct, xsubtype, field.20, sequencenumber, requestordn, responderdn,
  swiftnetservice, non repudiation, transfertref, transfertinfo, filedesc, transfertdesc, logicalname, signindicator, critid, infapid,
  deliverynotif, comments, notes, msgseculevel, dates, tuxedopriority, filedest, stkmsgpdeid, emtid, ltrcptsyno, ltrcpt, ltemis, flow,
  FINCopy, msgdateval, eventdate, typereseauid, infapseq1, infapseq2, direction, priority, ack, msgrefs, amlbehavior, ownerserviceid,
  correspondentName correspondentaddress, correspondentcity, correspondentcountry, correspondentnetworkaddr, tested,
  correspondentnetwork, validatedpercentage, nbofvalid, requestref, notifqueue, requesttype, secbpid, xqueue, receivercode,
  receiverind, validflag, ownerid, dn, rmaourbic, rmacorrespondentbic, rmaservice, filemsgref, acktext, format, xtype, wall,
  textetype, creatinguser, fileinfo, society, text, xlanguage, msgheaders, msgtrailer, jaxbref, jaxbelt)
  values
  (xmlid, x_extdate, x_eventType, x_amount, x_currency, x_state, x_units, x_correspondentId, x_sender, x_receiverNetworks, x_bankingPriority, x_applicationCode,
  x_processCounter, x_obsolescence, x_maxRetry, x_retries, x_fileSize, x_endFct, x_subType, x_field20, x_sequenceNumber, x_requestorDn, x_responderDn,
  x_SWIFTNetService, x_nonRepudiation, x_transfertRef, x_transfertInfo, x_fileDesc, x_transfertDesc, x_logicalName, x_signIndicator, x_critId, x_inFapId,
  x_deliveryNotif, x_comments, x_memos, x_msgSecuLevel, x_dates, x_tuxedoPriority, x_fileDest, x_stkMsgPDEId, x_EMTId, x_LTRcptSyno, x_LTRcpt, x_LTEmis, x_flow,
  x_FINCopy, x_msgDateVal, x_eventDate, x_typeReseauId, x_inFapSeq1, x_inFapSeq2, x_direction, x_priority, x_ack, x_msgrefs, x_amlbehavior, x_ownerServiceId,
  x_correspondentName, x_correspondentAddress, x_correspondentCity, x_correspondentCountry, x_correspondentnetworkaddr, x_tested,
  x_correspondentNetwork, x_validatedPercentage, x_nbOfValid, x_requestRef, x_notifQueue, x_requestType, x_secBpid, x_queue, x_receiverCode,
  x_receiverInd, x_validFlag, x_ownerId, x_dn, x_RMAOurBic, x_RMACorrespondentBic, x_RMAService, x_fileMsgRef, ackText, x_format, x_type, x_mur,
  x_TexteType, x_creatingUser, x_fileinfo, x_company d_text, x_language, d_msgHeaders, d_msgTrailer, x_jaxbRef, x_jaxbElt);

  Update temp_XML set status = 'Y' where XML_ID = xmlid;

  END;
  COMMIT;
  END LOOP;
  END;
  /

  1.No. multiple tag will vary how to extract those and concatenate them into a single column. I assumed that his occrrence in 3 for example:

  Use the fn:string-join() function:

  path varchar2 (4000) of comments 'string-join(comments/comment, "-").

  2. how to set the value NULL if no tag is not present. Tag in XML record number can vary.

  You don't have anything specific to do in this case.

  Missing tags with a projection in the COLUMNS clause will produce a column NULL by default.

• OBIEE 11 g: error - exceeded configured the maximum number of authorized release

  Hi guys,.
  
  We are implementing the OOTB repository, after some reports of loading data show the following error msg. Can someone tell me where to change the limits?
  
  «Error loading of list "«display error»»»
  «"Exceeded the configured maximum number of allowed output prompts, sections, the lines or columns»» It must be because of the restriction on the number of records in a report"
  
  Thanks in advance

  Hello user,.

  Even I faced the same error and solved in the way below: -.

  Error: Exceeded the configured maximum number of guests allowed output, the sections, the lines of OBIEE 11 g.

  So to solve this problem, add the below tags mentioned in the instanceconfig.xml file that is located under

  \Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1

  http://bidevata.WordPress.com/2012/04/27/exceeded-configured-maximum-number-of-allowed-output-prompts-in-OBIEE-11g/

  Mark useful/correct.

  Thank you
  OBIEELearner.

• Assign paragraph styles to xml tags correctly. How?

  Hello

  
  

  I want to assign xml tags to paragraph styles in InDesign CS6 on a Mac 10.6.8. The XML itself is organized as follows:

  
  

  <? XML version = "1.0" encoding = "UTF-8" standalone = "yes"? >

  < catalog >

  < article id '32434' = >

  "< img href="/bilder/32434.tiff "/ >

  < artikeltextgruppe >

  < artikelmarke > DieselGabana < / artikelmarke >

  < artikelheadline > super Jeans ist < / artikelheadline >

  < artikeltext > Superjeans knallt kidney. < / artikeltext > < number > 70238 < / weight >

  < artikelmaterial > 100% Jeans < / artikelmaterial >

  < artikelgroesse > UK < / artikelgroesse >

  < artikelfarbe > UK < / artikelfarbe >

  < / artikeltextgruppe >

  < / product >

  < / katalog >

  
  

  By selecting the option "Assign formats by name to the tags' (translated from the German), I wanted to create the desired look. But if I start all I get is the entire < artikeltextgruppe > textblock assigned to 1 formatstyle. And not to mention that the whole content of < artikeltextgruppe > resembles a single paragraph without any structure (no line breaks) the content is properly structured, because I can highlight the value of e.g. < artikelmarke > separately by doubleclicking the tag in the structure view.

  
  

  (a) what can I do to assign formats correctly AND to have correct line breaks?

  "(b) if I drag my node < img href="/bilder/32434.tiff "/ > iin the layout, I get a message posted to search again for the location of the correct reference. And this happens independently on the use of the relative or absolute references (even if I need to use those on) what can I do here?

  Thank you very much
  

  First of all, I have probably do a search and replace to remove the group element with a text editor ( and elements). They aren't really necessary.

  Secondly, I usually create my styles with the same names as the items themselves. Then, after the XML is imported, I use the command "map tags to styles" in the Structure pane.

  I copied and pasted the single article element to create 4 folders, added a change to an image for each record of the item. Once the paragraph styles have been mapped, your XML looked like this in form of two columns (to get all 4 records on a page)...

  

  By default, ID creates a single line to a single line in the XML file. So if you want to be on their own line of the elements, the XML must be formatted like this. If you need a different style within a paragraph, you create character styles and edit the items in a group of XML and or paragraph and add the code in the XML file accordingly or post-processing once inside the code.

  I still need to take the XML I gives me and reformat, moves with the tree items, change the links to the images, delete tabs and or spaces where I do not want, tag character styles, etc., to be closer to how I want the original format to be.

  Mike

• How can I increase the number of tags shown down to the bottom of the list?

  When I go to bookmarks/Tags, there are only 10 tags displayed. I have created at least 15 tags.

  Is it possible to increase the number of Tags displayed in the drop-down list?

  Thank you

  Do you mean "Recent Tags", which has an icon a folder of blue color with a magnifying glass looking for primitive on the record?

  This folder has a limit of 10 results. If you want to create a "All the Tags" item in the Menu Boomarks, you can do this by creating your own "smart folder. The process I use is a little involved, if patient with me (also see the screenshots).

  The query used by the recent Tags is:

  place:type=6&sort=14&maxResults=10
  

  So, for all of the tags, we will fall on the maximum number of results:

  place:type=6&sort=14
  

  If you prefer your tags in alphabetical order instead of having most recently used in the upper part, use it instead:

  place:type=6&sort=1
  

  Go ahead and select the line you want and right-click > copy.

  Then, click the drop-down bookmarks menu, expand the toolbar bookmarks, right click on any existing element and choose new bookmark.

  In location, paste the query and in name, type all tags (or description of your favorite). When you click on Add bookmark, Firefox to add it, but it does not show the blue search folder icon. Drag the bookmark in the menu, and it will turn into a search folder works.

  Success?

• maximum number of entries in "characteristics of writing."

  What is the maximum number of channels in the "write data"? It seems that it is only 16 entries. I have more than 16 parameters in my application. What do you suggest me? I would like to have all of the data collected in a single file.

  The Multiplex module allows to combine several strings into one. In general, use the parameter "by block. The output will be a single thread with all multiplex channels in the block. You can have a maximum of 16:1 multiplexed. Use several Multiplex modules. They do not have to be symmetrical, but do not keep track of how many channels is multiplexed on a single thread.

  In the writing module, click the box to the format Options file (ASCII or DASYLab) - at the bottom of the dialog box, you configure so that it matches how you multiplexes - by block or by value (for example). And then, on the right, set the number of channels is multiplexed in each of the input channels.

  Do this way said DASYLab disabling multiplex the data in the file. You will lose the channel names. You can configure the names of channel for multiplexed channels using the chains. At the bottom of the dialog box, you can assign a global chain for each channel. Tedious, but it can be done.

• maximum number of tabs in a tab control

  Hello

  anyone knows which is the maximum number of tabs, which can have a tab control?

  Thank you very much!

  Thanks to you all.

  Finally, I will use an XML file to store the spikes and a Boolean value in the registry to record the tips at startup.

• regular expression for the xml tags

  Dear smart people of the labview world.

  I have a question about how to match the names of xml text elements.

  The image that I have some xml, for example:

  Peter

  13

  and I want to match all of the names of elements, that is to say: no, son, grandson, age, regardless of any attribute have these items. There is a regular expression, I can loop, that can do this? (Something like "\<.+\> ". "") It is no good because it matches the entire xml string.) I'd really only two different expressions, one for the match start elements, e.g. and one for the correspondence of the elements, for example.

  Thanks for your help in advance!

  Paul.

  The site Of regular Expressions will be very convenient.

  They have some good tutorials on regexp with a demo of the XML tags:

  Here is a small excerpt:

  The regular expression <\i\c*\s*>matches an opening of the XML without the attributes tag corresponds to a closing tag. <\i\c*(\s+\i\c*\s*=\s*("[^"]*"|'[^']*'))*\s*>corresponds to an opening with a number any attributes. Put all together, <(\i\c*(\s+\i\c*\s*=\s*("[^"]*"|'[^']*'))*| i\c*)\s*="">corresponds to an opening with attributes or a closing tag.  (source)

  If you want advanced XML analysis I suggest JKI XML toolkit.

  Tone

• Maximum number of columns in model RTF Pivot

  HI -.

  For the model previously mentioned here matrix report problem with template RTF - text columns

  I want to restrict the maximum number of columns per page, and the table should be repeated for the rest of the columns in another page.

  For example, if there are 5 columns must be returned, I want the first 3 columns in the first page and the 2 others in a second page (with the hole repeating frame).

  It's for keeping data legible printing of the pdf format, otherwise the data seems damaged and unreadable.

  Y at - it ideas to achieve this requirement?

  Best regards

  Rupture of the horizontal column works fine in the attached version of the RTF model.

• Concatenate the nested XML tags

  Hello

  I am looking for a solution concatenate duplicate in an xml tags.

  I need only the tags 'tag' 'type = keyword' in a field in a table.

  The sql statement that I use, I get six records and I just need a registration.

  Hope that my written English is not hard to understand what I mean.

  It is a part of the XML data.

  <? XML version = "1.0" encoding = "UTF - 8"? >

  < list >

  < article id = "25230245" title = "st" publish = "true" sender =">

  < categories >

  < naam category = "Staking" externalid = "Economy/staking" / >

  < / categories >

  < geoinfo latitude =' 52,3936' longitude' 6,142065 =' zoom = "15" / >

  < tags >

  < tag name = 'Overijssel, Raalte, Raalte' type = 'rental' / >

  < tag name = 'Overijssel, Deventer, Deventer' type = 'rental' / >

  < tag name = 'Overijssel Olst-Wijhe Wijhe' type = 'rental' / >

  < tag name = "CAD" type = "keyword" / >

  < name of tag = "vleeswarensector" type = "keyword" / >

  < name of tag = "seniorenregeling" type = "keyword" / >

  < tag name = "fnv bondgenoten" type = "Keyword" / >

  < name of tag = "werkonderbreking" type = "keyword" / >

  < tag name = 'Zwanenburg' type = "Keyword" / >

  < tag name = "staking" type = "Keyword" / >

  < tag name = "Scott" type = "Keyword" / >

  < name of tag = "La¼pack" type = "keyword" / >

  < tag name = "cnv vakmensen" type = "Keyword" / >

  < / tags >

  < publicatiedatum datum = '1400663902374' datumstr ='2014 - 05-21T 11: 18:00 + 0200 "/ >"

  < wijzigingsdatum datum = '1400663902374' datumstr ='2014 - 05-21T 11: 18:00 + 0200 "/ >"

  < printdatum datumstr = May 22, 2014 "/ >"

  < bestemming >

  < bestemming channel = 'web' site = 'ST' page =' Regio/Deventer /' primary = "false" / >

  < bestemming channel = 'web' site = 'ST' page =' Regio/Olst-Wijhe /' primary = "false" / >

  < bestemming channel = 'web' site = 'ST' page =' Regio/Raalte /' primary = "true" / >

  < / bestemming >

  < bron naam = "Benny Koerhuis" / >

  < figurines / >

  < / product >

  < / list >

  And it's my sql (part of a plsql procedure) statement.

  SELECT decode (upper (t1.publish), 'TRUE', 'Y', 'n')

  , trunc (to_date (substr (replace (t1.pdate, 't',' '), 1, 19), "YYYY-MM-DD HH24:MI:SS")) update

  , to_date (substr (replace (t1.flitstijd, 't',' '), 1, 19), "YYYY-MM-DD HH24:MI:SS") flitstijd

  t1.naam_flitser

  t1.sectie

  t1.titel

  t1.soort

  t2.trefwoorden

  OF flits_berichten_clob t1

  , XMLTABLE ("' / / test/artikel")

  By the WAY of XMLTYPE (t1.xml_file)

  COLUMNS publish VARCHAR2 (10) path '@publish '.

  update the PATH in VARCHAR2 (25) "publicatiedatum/@datumstr".

  , flitstijd PATH VARCHAR2 (25) "wijzigingsdatum/@datumstr".

  , naam_flitser PATH VARCHAR2 (25) "bron/@naam".

  , books VARCHAR2 (255) PATH 'bestemmingen/bestemming[@primary="true"]/@page '.

  , titel VARCHAR2 (10) path 'bestemmingen/bestemming[@primary="true"]/@site '.

  , soort PATH VARCHAR2 (10) 'bestemmingen/bestemming[@primary="true"]/@channel '.

  tags XMLTYPE PATH 'tags') t1

  , XMLTABLE ('/ tags/tag [@type = "keyword"] ")

  PASSAGE t1.tags

  T2 of COLUMNS trefwoorden VARCHAR2 (255) PATH "@name")

  ID WHERE = 15;

  This is the result.

  THERE	21/05/2014	21/05/2014-11:18	Benny Koerhuis	Regio/Raalte.	ST	Web	werkonderbreking
  THERE	21/05/2014	21/05/2014-11:18	Benny Koerhuis	Regio/Raalte.	ST	Web	Zwanenburg
  THERE	21/05/2014	21/05/2014-11:18	Benny Koerhuis	Regio/Raalte.	ST	Web	staking
  THERE	21/05/2014	21/05/2014-11:18	Benny Koerhuis	Regio/Raalte.	ST	Web	Stegeman
  THERE	21/05/2014	21/05/2014-11:18	Benny Koerhuis	Regio/Raalte.	ST	Web	La¼Pack
  THERE	21/05/2014	21/05/2014-11:18	Benny Koerhuis	Regio/Raalte.	ST	Web	CNV vakmensen

  Is it possible to concatenate the results of the last column?

  It should be "werkonderbreking, Zwanenburg, staking, Stegeman, la¼pack, cnv vakmensen" so, I get a recording instead of six.

  Thanks in advance.

  Is it possible to concatenate the results of the last column?

  Yes, use string-join function:

  ...

  titel	PATH of VARCHAR2 (10) 'bestemmingen/bestemming[@primary="true"]/@site '.
  soort	PATH of VARCHAR2 (10) 'bestemmingen/bestemming[@primary="true"]/@channel '.
  trefwoorden	PATH of VARCHAR2 (4000) 'string-join(tags/tag[@type="keyword"]/@name, ",").

  ) t1

  In this way, that you need more of the second XMLTABLE.

• How can I replace a range / the text in an XML tag

  I want to replace a piece of text in an XML tag in a text frame.

  In my input parameters, I have the In-design page number, UID text frame in this page and the name of the XML tag within this block of text

  that surrounds my old text.

  which interface/function/command can I use who can help me to replace the existing text with the input text?

  for example:

  [old text] --> [new text]

  where [] is the XML tag with the name tag1.

  After a few trails and POC, I was able to write the piece of code below.

  It detects the start and end position of the marker and based on that we can replace the text inside. It will be useful.

  InterfacePtr data (signalMgr, UseDefaultIID());

  If (data == nil)

  {

  break;

  }

  UIDRef docRef = data-> GetDocument();

  InterfacePtr doc (docRef, IID_IDOCUMENT);

  IDataBase * db = docRef.GetDataBase ();

  Get the spread

  InterfacePtr spreadList (doc, UseDefaultIID());

  Int32 spreadCount is spreadList-> GetSpreadCount();.

  for (int32 spreadIndex = 0; spreadIndex)< spreadcount;="" spreadindex++="">

  {

  Get the reference to the spread

  UIDRef spreadUIDRef (db, spreadList-> GetNthSpreadUID (spreadIndex));

  Get the object of dissemination

  InterfacePtr spread (spreadUIDRef, UseDefaultIID());

  Int32 numberOfPages = spread-> GetNumPages();

  for (int32 nPage = 0; nPage)< numberofpages;="" npage++="">

  {

  UIDList pageItemList (db);

  spread-> GetItemsOnPage (nPage, & pageItemList, kFalse, kFalse);

  Browse page items and save on the UID of executives.

  Int32 pageItemListLength = pageItemList.Length ();

  for (int32 j = 0; j)< pageitemlistlength;="" j++="">

  {

  UIDRef pageItemRef = pageItemList.GetRef (j);

  InterfacePtr frame (pageItemRef, UseDefaultIID());

  If (frame-> IsTextFrame())

  {

  Now try to get the position of the Guide to the XML tag

  TextIndex 0 = startPos, endPos = 0;

  IXMLReferenceData * xmlReferenceData = Utils()-> QueryXMLReferenceData (pageItemRef);

  REF XMLReference = xmlReferenceData-> GetReference();

  IIDXMLElement * element = REF. Instantiate();

  InterfacePtr (REF.). Instantiate());

  TagUID UID = element-> GetTagUID();

  WideString elementName = element-> GetTagString();

  for (int32 i = 0; i < element-=""> GetChildCount(); i ++)

  {

  ChildRef = element XMLReference-> GetNthChild (i);

  InterfacePtr child_element (childRef.Instantiate ());

  tagUID = child_element-> GetTagUID();

  elementName = child_element-> GetTagString();

  Int32 index = 0;

  Utils()-> GetElementMarkerPositions (child_element, & startPos and endPos);

  startPos += 1; to proceed exclude the starting tag

  }

  }

  }

  } / / Browse pages spread

  }