big blur on dvd still snapshots

Similar Questions

• DVD still image capture

  I want create snapshots of a DVD and save in JPG format or another file format.  I tried the command + shift + 3 and a utility called SnapNDrag.  I get a gray screen, if the DVD is paused or read.  I guess this is a sort of copyright protection.  I'm not ripped off the someone work, this is a DVD made by a friend of home movies.

  If I can't do this with the DVD player, can I somehow extract the contents into a movie file?  I think I might then use iMovie to capture still images, no?

  Need to rip the DVD to get the video files. Handbrake is a popular application to do this. It of a free download and works for unprotected DVDs.

• Too big for the standard of encoding DVD file size - please advise

  Hi - I turned a 6-hour training session that went well.  I turned it to 1280 x 720.  For the web version, it will be no problem, as I'll just export to F4V.

  But I'm having a hard time finding for the DVD export settings.  I know that the drive is limited to 4.6 GB.  I broke up the sequences PPro CS4 30 minutes or more (some are smaller or larger than others).

  I first exported to QT, but found only 30 minutes export way too big (8 GB) and still it brought down to 2 GB, but which will only allow me to put 60 minutes on a single DVD vs the almost 2 hours I want to get on 1 disk.

  AVI is even worse.

  I know that widescreen is a larger size, so I'm willing to make standard NTSC, but I can just know that export by establishing in PPro CS4 allows you to do this work.

  Can someone advise me on this?

  Thank you.

  > Again and export of first MPEG-DVD works great. I exported it and then still chewed down from 60 minutes of finished video

  This seems really odd... to me... as looks that you encode twice, once in the body, and again in yet... but, if you are happy with the DVD, that's all that matters

  I'm still working with an audio track, from my camera, so no comment on your 2nd question

• Satellite A135 - problem with the CD/DVD burner

  Hey guys,.
  A few days ago as nearly a week ago I had burned an audio CD for myself and it worked perfectly. Today when I tried to burn an image on my DVD, disaster. I use two software. IMGBURN & NERO. Unfortunately both failed me. What is happening is that the burning process starts normally, it shows that the buffering and burning taking place as well as caching of files. "Finally, it shows the burning process has been a success, but when it comes to verification, the drive appears saying: data verification failed - too many errors (Nero) and for IMGBURN it says ' they layouts do not match. When I reinsert the DVD, it shows that it is completely empty. Although both claim that the fire was successful. Later, I tried to burn a data dvd, still no luck, engraving, he shows successfully but verification fails and reinsert is empty.

  My laptop is: Satellite A135
  CD/DVDROM: TSST CORP TS-L632D ATA
  OS: Windows

  the default windows was vista when I bought it.

  Hello

  If you can't burn DVDs, then you should check first if it is a software problem based question or related equipment.

  I've been reading about the reader of CD/DVD burning questions and as many times the registry has been corrupted.
  Means that you was able to burn the DVD after you remove the upper and lower filters in the registry. Google for it and you'll find many pages.

  Is there a problem of CD/DVD drive, then you should find a good update on the page of European Toshiba driver in your laptop. If there is no update firmware, then it means that this firmware is ok and it s not necessary to date.

  Last but not Lea not all CD/DVD drive are compatible with all drives (CD and DVD).
  Why? Because the different CD and DVD manufacturers produce own using different standards. In this case, it may be possible that not all discs will be properly treated

  I had the same problem but might solve this problem by using TDK R CD or DVD

• Satellite A200-1js: I can burn DVDs only at 4 x

  Hello people.

  My of my Satellite A200-1js dvd rom is not working very well. When I try to burn, a dvd is only recording at 4 x.
  But I want more speed because the original dvd are 16 x and it can operate at this speed.

  A firmware update fix this?

  If yes how can I do this?

  Thnkx

  As far as I know burning and playback speed depends on the material (CD/DVD drive). Looks like your CD/DVD drive can burn to DVD at 4 X max.

  > A firmware update fix this?
  Don t think so; first an update is not available, and second, the material is not able to burn faster.

  By the way; I burn my DVD still at 1 x because the quality is much better and more DVD players can read burned environment!

• Qosmio G30: DVGW/HD TS - L802A fails reading/burning DVD - CD seem to be ok

  I recently had a big problem of dvd burning. I checked that disk with burning a CD and he had NO problem at all.
  It's completely random what position it fails burning... it could be is the buffer runs out of data but this disc supported burnproof, so this shouldn't be wrong in case of buffer against the rough work when beautiful burn a CD?

  Then I tried yesterday put in a COMPLETE DVD and copy all that simply training hard and he doesn't have a copy. This means what the DVD section of this car has some defect and needs to be fixed/replaced? This unit is less than one year...

  Or maybe a software which can cause these problems?

  Stenvik

  Hello

  Have what burning software you used?
  Burning software Nero supports different options to configure the best burning speed and burning performance to avoid problems of buffer.

  But this looks a bit like a problem with the lens of the drive. It looks like a problem of lens calibration is it possible s DVD or watch DVD movies?

• A DVD player is not detected (for Windows)

  Windows repeat me that "a DVD player is not detected," even if there is a DVD player installed in my computer by the manufacturer.  I pushed it completely with my thumb to make sure that it is not disconnected from its moorings of connection.  The little green light on the door of the reader flashes once every second about. It did not used to do this when the DVD used to work perfectly. The driver up to date.  But my DVD still does NOT appear on my device manager page. What could be the problem? How should I do?

  Done anything here helps,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/why-CDDVD-drive-is-not-detected-by-Vista-OS-HP/aaf8191e-e16e-E011-8dfc-68b599b31bf5

  It is always possible that there is a hardware problem but disappears under Vista disks were a 'common' problem

  Have you made any changes or installed new programs?

  Have you tried a system restore?

• DVD drive not seen by Windows 8

  I have a Dell Inspiron with Windows 7 537 originally. The installed and functional DVD drive is a TSST DVD +-RW TS-H653G ATA drive.

  I have recently installed WIndows 8 in dual boot. When I boot with Windows 8, the DVD drive is not seen. When I go to the Device Manager and I look at the properties of the DVD player, I have the following message appears in the device status area (here I give a translation of the message in french)

  This device is not actually connected to the computer (Code = 45).

  To correct this problem, reconnect the device to the computer.

  The fact is that the DVD still works fine when starting with Windows 7.

  Do I need a new driver or a new device or what else?

  Marcel Painchaud

  (mpainchaud67)

  
  

  Hi Marcel Painchaud,.

  I appreciate the time and effort you took to resolve the problem. Please do the following:

  1. run the command as administrator prompt. Type cmd in Windows 8 modern user interface and press HUMINT + shift + enter

  2 type following and say enter

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  3. reboot the system

  Once the system is restarted check if the DVD player works fine.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• Coding Windows DVD Maker error

  Hi all
  I am trying to burn files, but the encoding always stops at 0.6% before generating the following error.

  [Window title]
  Creating Windows DVD

  [Main instruction]
  Cannot create the DVD

  [Content]
  An error has occurred when burning the DVD.

  [OK]

  A little more background information:

  -I am running Windows 7 Pro
  -I don't have any other burning (like Nero) software installed
  -There are 11 .vob files to burn
  -C' is 150 minutes 106
  -There aren't any effects or a menu custom

  Someone at - it suggestions? Internet research shows that there are people who have the same problems, but I don't know yet what are codecs and how to check if I have the vouchers.

  Thanks in advance!

  Hello southcecile,

  Thank you for visiting the Microsoft answers Site.

  The .vob file format is not a supported format file Windows DVD maker. You can try to convert the video files to a supported file format and then try to burn the DVD still. Windows DVD Maker supports digital video files in WMV or AVI container format.

  For more information about creating a project using Windows DVD Maker, you can also view the link below:

  Work with projects in Windows DVD

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD RW is no longer available in Windows 8

  1. I have a dual boot Linux and Windows 8 both on a separate HARD disk.

  2. when I installed first Win8 my Optiarc DVD +/-RW ND-3570 worked perfectly on an operating system.

  3. after a recent upgrade of the DVD Win8 no longer appears on this PC.

  4. the DVD still works when a cock inserted but then stops without disk access.

  5. I studied a lot of previous similar problems on this forum and tried without success.

  6. I went to regedit.exe and the following key is the one that is selected. I think it's relevant?

  Key name: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e965-e325-11ce-bfc1-08002be10318}
  Name of the class:
  Last write time: 2015-01-26 - 12:38
  A value of 0
  Name: class
  Type: REG_SZ
  Data: CDROM

  Value 1
  Name: ClassDesc
  Type: REG_SZ
  Data: @%SystemRoot%\System32\StorProp.dll,-17001

  Value 2
  Name: EnumPropPages32
  Type: REG_SZ
  Data: c:\windows\system32\storprop.dll, DvdPropPageProvider

  Value 3
  Name: NoInstallClass
  Type: REG_SZ
  Data: 1

  Value 4
  Name: silent installation
  Type: REG_SZ
  Data: 1

  Value 5
  Name: IconPath
  Type: REG_MULTI_SZ
  Data: %SystemRoot%\System32\imageres.dll,-30

  Value 6
  Name: LastDeleteDate
  Type: REG_BINARY
  Data:
  00000000 3f ca da 50 f7 05 01 d0 -? EUP÷. D.

  7. when I try to access the properties access is denied.

  8. it MUST be a simple answer to this - can any MVP give me a solution please?

  Hello

  Try this... You are missing a file... There should be a "0000" folder, '"0001" or even "0002" listed above properties... ".

  1. run cmd as administrator (right click left lower corner when Start appears)

  2. type: or copy / paste

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  3. press enter

• First 14 will burn DVD but won't burn Blu Ray. On the same computer 11 first has no problem burning DVD or Blu Ray. Issue. Why dooes 14 does not. What can I do

  Can anyone help on why my first charge up to 14 will not burn Blu Ray but will burn DVD still 11 first on the same computer has no problems burning Blu Ray or DVD. ? Thank you. RB

  What operating system do you use?

  What brand of computer are you using (HP, Dell, etc.)? Have you spent at the web site of the manufacturer and installed the drivers from HP, Dell, support of any web site page? Sometimes drivers that Windows installs are not as effective - especially if you have recently upgraded to Windows 10.

  There may be other factors, but we will need a lot more information in order to solve the deeper problems.

• Get the "layer break" error message when you try to preview a DVD single sided, or build a disk folder or ISO image

  Hello!  Hoping someone may be able to help with a strange problem.  I have not found anything in the forums or on the web that match my symptoms.

  I use Encore CS6 (v6.0.1.013) on a MacBook to the retina year last to create successfully a number of single-sided DVD with menus, chapters and all that.  I usually make a copy of a previous project to DVD, then replace the video media with the new files and transcodes them, move and rename chapter markers and rework the menus in Photoshop.  I will then build the ISO images to DVD and Blu - Ray (both single-sided) and use them to burn multiple copies of each DVD for customers.

  This week, all by developing one of these projects, trying to create an ISO from DVD image that looked like it would take on a 4.7 GB DVD, I received the message "layer break" ("the chosen layer break does not double layer requirements.  To resolve this problem, set a new layer break manually or choose to automatically set the layer break. ") because (I guess) the material was too long for the 4.7 GB DVD (generation screen now shows approximately 5 GB of material are in the project).  This is the first time I've seen this message - usually just tells me that the material is too big for the DVD.

  I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), returned and replaced the files transcoded, and now the generation of DVD screen shows that there are approximately 700 MB of free space on a 4.7 GB DVD.  But I have not yet able to build any version of the DVD (image, folder, drive), without the message 'layer break '.  I also now get this message of breaking down even trying any menu, killing my ability to get a preview of the DVD menus in Encore to "Preview from Here".

  Just to see what would happen, I chose a 8.4 GB double layer DVD and selected 'manual' instead of 'auto' for the selection of layer break, but never had the Selection dialog box of a break layer, just the error message "layer break".

  Usually, I build images DVD and Blu - Ray with the same material in the same project.  I use different transcoding settings for each, and I was able to build an ISO from Blu - Ray without this "layer break" error on the Blu - Ray version (which is about 24.5 GB when built).  And as I mentioned earlier, this is the first project where I saw this message of layer break.

  Any suggestions would be greatly appreciated!  I would rather not to recreate the project from scratch, but I'm worried that I might have to.

  Thank you

  Jon

  Thanks for the quick response!  My problem is that I don't want to make a record double layer - it's a single layer 4.7 GB max project (currently at about 3.5 GB, after removing the extras timeline and asset to see what it might do).  And even when creating a file, I get the error message "layer break", so I couldn't use ImgBurn if I wanted to.

  Thanks for the links - I had seen a lot of them before, but missed a comment from someone, which means that once a layer break set in yet, it cannot be changed.  It makes me wonder if, once again goes in the way of thinking that a rupture of the layer is required, there is no way to disable this behavior.  Has anyone seen this behavior?

  I think my only option at this point is to rebuild the project from scratch, following Neil Wilkes strategy for the command to add assets (I had not paid much attention information previously).  Suggestions are always welcome, however!

• Windows Vista hangs at the Welcome screen. Can anyone help?

  From early December 2009, my Dell Inspiron E1505 said hung up on the 'Welcome' screen, leaving me stuck and cannot use the computer. It would do this every time I tried to start it. Since that time I switch Safe Mode and using the restore system to get it going again. Sometimes, I have to use restore the system several times to allow to start correctly. More recently, I learned that when it hangs at the Welcome screen, I can press "Ctrl-alt-del" and then my computer will load up the icons after about 10 seconds and then it is ready to go.

  I finally started to 'Sleep' mode, and then it starts right up when I want to use it. The problem is that he sometimes stops for updates, or crash if I overload it somehow, and then it's a big problem, it'll still do. ... Well, now I can turn it on by pressing the "Ctrl-alt-del' when it clings to the host, but I don't feel comfortable making. I'm afraid that it will eventually mess worse.

  I have not installed any new software or downloaded anything by email, with the exception, so I don't know what caused this problem. I have the feeling that something has been altered during the automatic update of windows.

  Can someone please help me understand what caused this problem and what to do to fix? I need a walkthrough very detailed, as I am not a computer technician. My experience with computers is very limited, but I do not know a few basics such as obtaining safe mode, etc. My warranty with Dell has long expired. My computer is 3 years old. With the exception of this problem Windows Vista worked great shape. I liked Windows XP much better, but Vista was 'correct' that day until this problem came.

  Thank you: Jean

  Hello

  Given that the system restore works sort the problem is likely corruption at a certain level.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  If necessary try a stronger set of controls:

  From the COMMAND prompt from a floppy boot or the Recovery Console/environment (if you have) run these:

  Chkdsk /f /r

  RESET

  sfc/scannow

  RESET

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  And if necessary check here:

  Manufacturer diagnostic utilities - run for the manufacturer of your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  Trial versions of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Rules for the button highlights.  It's a universal thing?

  So I learned recently that highlights made button (or buttons in their "selected" State) in still cannot have a gradient or blur and will still not recognize some blending modes such as "screen" from a PSD file.

  Is this just a thing still, or is this the case with any DVD authoring software?

  All this occurred when I was trying to give my buttons a glowing overlay blurred effect when selected.

  Thanks, yet the community!

  It's the DVD specification. Not just yet.

  For Blu - Ray, there is more capacity, which still has not fully utilized.

• Songs missing in iCloud

  I bought an album containing 20 songs from back in 2012.  The reception in iTunes confirms 20 songs.   However, when I look under "purchased" in iTunes, I don't see that 14 songs.  Also, I can only download 14 songs on the new features.  I remember very well being able to play all 20 songs for a while.  So either my list of "bought" in the cloud has been corrupted at some point or Apple no longer has the missing songs (in which case I'm afraid there is not much I can do).  The album is no longer in the iTunes store.

  Fortunately, I still snapshots and backups of the album original 20-song, but I still want to solve this problem.

  Thanks in advance.

  You have checked to see if you have hidden tracks of the Cloud: hide and expose the purchases made on the iBooks Store - Apple Support, App Store or iTunes Store ?