Qosmio G30: DVGW/HD TS - L802A fails reading/burning DVD - CD seem to be ok

Similar Questions

• CD drive won't burn dvd or read burned dvd but will play store bought dvd

  TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

  Hello

  Have you tried to close all programs and then insert the disc in the drive?

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
  However, it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Re: Satellite P200 - TS - L802a Won't burn DVD on Windows 7

  I have a Satellite P200. Due to the original HDD becomes full, I installed a new drive hard more - and installed Windows 7 Ultimate on it. I can't get my DVD burner to work (TS-L802a). The DVD player is fine because if I put the old hard drive back (Vista) it works perfectly. I have the 6.1.7601.17514 (TF32) firmware installed. I tried to upgrade to the WinVup2_L802A_RATO35 however the installer does not recognize that there is a DVD player - even if it will read DVDs without problem. It says update is not available and the Start button is grayed out.

  I searched high and low for a solution and I'm out of ideas. Can anyone offer a solution please? Thanks in advance.

  NB: I have not upgraded from Vista - I bought Windows 7 to install on new hard drive.

  Hey,.

  > even if it will read DVDs without problem
  This means that DVD burning function is affected, but you can play DVDs without problem, right?

  Well, this could be also related to the brand of DVD. This DVD you use for burning discs?
  I m using the DVD - R Verbatim and TDK. The two brands works fine on my laptop.

  What burning software do you use? Have you tried with CD Burner XP?

• Inspiron E1505 - reads/Burns DVD but can't read or burn CDs

  In the last two months, (shortly after my warranty expired, ARGHH!), my Sony DW-Q58A ceased to read or burn or even recognizing CDs all together.  Is this a common problem?  It is simple to fix?  I'm not at all afraid to start opening that baby, not that it is more under warranty but it wouldn't hurt to have some guidance on what to do.  not reading CD not during boot or the other, is not associated with windows.

  
  

• DVD player will not read burned DVD again.

  I have Windows 8.1 and a his Ashley Soundblaster card.

  PrPro CC project: imported from motion picture film at home (DVD NTSC), edited, and soundtrack.

  Transcoded with Media Encoder.

  Imported as the timeline again: added, any chapter markers the PSD as Menu and related chapters (etc.) then engraved on DVD.

  DVD only plays in your computer (Windows and MAC), not in a DVD player.

  Because the help files are really not very useful (must be in business somehow with Lynda.com), I looked at various things. I do not know who exactly fixed the problem, but here are some of the things I've done:

  (1) in PrPro CC, chronology selected then file > export > Media. Is nothing new.

  (2) in Media Encoder, in export settings, I selected the tab changed and Audio Dolby Digital PCM. Must be a conflict with export of PrPro CC which had PCM audio.

  (3) in Media Encoder, changed the Source range to the entire sequence. This time, I got three output files (WAV, MPEG and XMP). Before you change the settings, I received only MPEG and XMP.

  (4) in the still, import as > timeline time MPEG and WAV.

  (5) in the still, import as > Menu for my PSD file and implement all actions.

  (6) in still, tab generate, in area Codes > activated Custom, then deselected all except 1 region.

  (7) in, tab generate, in Destination, permit Test before writing. On every other DVD - R failed as "already been written" (or something like that).

  (8) in again, burned ISO then DVD, both for the current project.

  (9) slapped DVD in all my DVD players.  SUCCESS!

  So much help does not have that kind of help!

• Qosmio G30-211-can save on an HD-DVD drive?

  Hello!

  Is it possible to save on clear HD-DVD-r disc?

  Hello

  AFAIK Qosmio G30 comes with the first generation of HD-DVD players. This means that these readers can read-only. Qosmio G40 has HD - DVD which can read and write on blank HD-DVD media.

• Qosmio G30 crashes when loading dvd blank media

  I have a fairly new Toshiba Qosmio G30 laptop. I recently discovered that the DVD-R or CD - R blank media insertion causes the system crash BSOD blue screen of death. At the moment I have not tried with other types of media. However, DVDs and pre-recorded CDs play perfectly well. After the BSOD re-boot system and sends an error report to Microsoft.

  Y at - it a good soul out there who can give me a suggestion as how to solve this problem, is this a known problem or common? I was not able to find anything on Google.

  Gareth has soon

  Accident analysis of Microsoft:
  http://oca.Microsoft.com/en/response.aspx?SGD=d7398fe5-a09f-4446-A827-3c762777fe89&SID=10

  Hello

  According to the Microsoft Online Crash Analysis, the BSOD was caused by the unknown device driver.
  But it's very strange because the device uses a common MS Windows driver for a CD/DVD drive.

  A question: have you used the OS from the Toshiba restore CD or you made some changes to the operating system?

  However, to my knowledge, not all media are compatible and taken in charge. So eventually the error message because of the use of any compatible CD or DVD.
  You will find the information on compatible media user manual.

  -------------
  Update:
  -------------

  Please also check this:

  -Right-click on the DVD drive-> properties
  -Go to the menu point record
  -Enable recording for the DVD player

  Maybe it's now possible to enter a blank CD or DVD

• Satellite L500D - can't read/write DVD

  Hello

  About a fortnight ago my DVD drive stopped reading/burning DVD and now only times/burns CD I followed the guides to remove the upper and lower filters and reformatted my laptop to factory State and the DVD player does not work.

  I bought a new replacement drive, and is not reading the DVD either so im assuming that my original DVD player worked but there is something wrong with the hardware of the laptop itself?

  I bought the laptop in November ' 09 so it is still under warranty or is there anything else I can try?

  See you soon

  Hi mitchello,.

  > and reformatted my laptop to the factory of the State and the DVD drive has failed.
  If you have tested with factory settings and it still doesn t work it s hardware malfunction but it strange why s it doesn t work with a new disk

  What program you use to read or write DVDs? I can recommend the VLC to play all the multimedia content and CD Burner XP Media Player like burning program. Both programs are freeware and works perfectly. Never had a problem with these tools.

  Have you bought a new drive to an authorized service? I ask this question because not all readers are compatible with all mobile phones due to the assignment of the different pins. If the new drive does not work you can return it for a replacement.

• Qosmio G30 - can't read HD-DVD

  Had this laptop for a while, but decided to try and find a HD DVD for the first time. Computer does not recognize the HDDVD.

  Play normal DVD OK but will not play the HDDVD?

  Anyone out there can help. I have very limited technical knowledge simple instructions would be appreciated.

  Hello

  Your Qosmio G30 is equipped with an HD-DVD player?
  First check because it sounds like this your drive is just a DVD player.

  For more information, see the user's manual.

  Welcome them

• Qosmio G30 - E10: no reading DVD with "Toshiba HD DVD Player.

  Hi all

  If I try to play a normal DVD (not a HD-DVD) with the Toshiba HD-DVD player software, I get the message next to the HD-DVD player:

  "This player has no DVD Playbackfunction. Please try an appropriate for the DVD playback application.

  HD-DVD drive's current firmware. HD-DVD's on current patchlevel 4.20.16.
  DVD with InterVideo WinDVD playback works fine!

  Laptop is a Qosmio G30 - E10, with Vista Ultimate (factory standard).
  Any ideas?

  Thanks in advance.

  Sincerely
  Uwe

  Hello

  Did you ever ask yourself why Toshiba install two players on this laptop HD-DVD? Probably not.
  With short words: HD-DVD player is designed for playback of HD-DVD only movies. To watch regular DVD movies with a DVD player. For this application use WinDVD player.

  Goodbye and enjoy your great laptop Qosmio.

• TOSHIBA DVGW/HD TS-L802A-ATA do not work after the update to Vista SP2

  Hello

  My devices Toshiba P200 DVD/CDROM has stopped working (code 39) since I've updated with Vista SP2.

  TOSHIBA DVGW/HD TS-L802A-ATA
  RSFOBUJ XEBG5QVCPQ7C SCSI

  I run Microsoft Fix It (http://support.microsoft.com/gp/mats/?ln=en) + "your CD or DVD drive cannot read or write media.
  But it has not solved the problem.

  I download and run the Microsoft devcon command-line utility.

  > devcon stack gencdrom

  IDE\CDROMTOSHIBA_DVDW/HD_TS-L802A___TO35___\5&31E4E654&0&0.0.0
  Name: TOSHIBA DVGW/HD TS-L802A ATA Device
  Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
  Controlling service:
  CDROM
  Lower filters:
  tdcmdpst
  5 SCSI\CDROM&VEN_RSFOBUJ&PROD_XEBG5QVCPQ7C&REV_1.03\ & 36E5972 & 0 & 000000
  Name: RSFOBUJ XEBG5QVCPQ7C SCSI CdRom Device
  Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
  Controlling service:
  CDROM
  Lower filters:
  tdcmdpst

  I guess that this lower filter of "tdcmdpst" (the writing of TOSHIBA motor filter driver) is the issue.
  But I can't remove the filter 'tdcmdpst' even with admin rights.

  > devcon classfilter lower tdcmdpst

  DevCon has failed.

  How can I remove this filter to upgrade Vista SP2?

  Kind regards

  Nicolas

  Can roll you back OS to an earlier time before installation of SP2?
  Drive works properly again?

• Qosmio G30 - fan was blasting and evil

  Yesterday when I got home I started my Qosmio G30 and I think that the fan was blasting and struggling to be honest, although I only realize that afrer do some reading this morning. In any case, I have used the PC for about an hour and then left running with 1 application running while I went out.

  Back a few hours later, the laptop didn't stop it yourself, but there are two generic boxes that had arisen indicating to stop the laptop and return it for service.

  By the sounds of it the fan had stopped working together and the computer has been deadly quiet. I restarted and still once the fan wasn't working at all, and even if the laptop loaded in windows, I immediately stopped him again.

  I am afraid that the laptop has not closed itself down when the fan is not, and if she has not done this, any damage likely to be caused, even if he did load in windows?

  Looks like fans have a great generation to the top of the dust or the fan has failed.

  Send the laptop to an ASP, they can check the fans and remove dust for you.

• HD-DVD on Qosmio G30-126 player no longer works

  Hi my Qosmio G30 - 126 seems to have a corrupt DVGW HD TS-L802 ATA Device has...
  No CD is recognized in my HD player DVGW. I use Vista.

  What should I do to get the driver?
  When he checks my computer since internet is eeems to say that the reader is up-to-date. However when I try to use the reader, it is said that my driver is corrupted.

  Help

  Ayman Albritton

  E-mail [email protected]

  Thank you

  Hello

  If all goes well there s nothing serious, but according to your message, we should not exclude the HD DVD drive fault.
  Have you tried to update the firmware on the disks?
  Usually these packages, you should find on the European driver Toshiba page.

  But look, man. If the firmware update is not possible or doesn't help then the chances are that the HD DVD player is really defective and must be replaced.

  To do this you must contact the ASP in your country. Probably, the guarantee is valid and this procedure can be done for free.

  Best regards

• Qosmio G30 (PQG31) - problem with cloned hard drives

  Hi all!

  * Qosmio G30-154 * (* PQG31 *).

  Demo of the Qosmio has 2 hard drives with XP MCE (32 bit) installed on the primary.
  The RAID parameters are JBOD.
  BIOS is "newer" 3.90

  I would try to upgrade the drives (without installing any OS) and... have a problem!
  BSOD "Stop 0x0000007B" after 'clone with resizing' for the main HARD disk.

  I read on [drivers Toshiba RAID | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48489] also [how to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm] and (or)
  [SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations | http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm], but I don't want to install OS, I want to keep intact my OS work.
  F6 (for all usb drivers) is not available to boot OS, sorry.

  "cloned" drive is in line with the correct name of made in the BIOS. "Cloned" secondary drive works (with old primary school). How to get access to the new primary OS and loading cloned? Please, any ideas?

  Thank you.

  Hello

  I think that the system cannot boot to the new HARD disk as the partition where the system is installed, was not marked as bootable system partition.

  I recommend to insert the previous HARD drive and to start the laptop.
  HARD drive new, cloned could be connected as an external HARD drive to a USB port.

  Then you should go to disk management (right click my computer - manage-> management-> disk management computer)
  Here you can see the HARD internal disk and the 2nd HARD drive connected to the USB port
  Right-click on the partition (2nd HARD drive) where the Win XP has been installed and choose the partition as the system partition and mark it as active.

  Then you could change the HARD drive again and could power the device in place. Usually, the system should boot to the top of the new marked system partition.

• Qosmio G30-154 and 155 - image Enhancement Utility does not work

  I read the

  wire https://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=21006
  as I have such a problem.

  I installed Picture Enhancement Utility and when I started the application I got an error

  * This application does not work on the current version of BIOS system * and stored program settings are not saved.

  My BIOS version is 3, 90 - WIN
  Y at - it the new vesion of work of image Enhancement Utility?

  Image Enhancement Utility came out for the Qosmio G20 series.
  For Qosmio G30 such utility is not out!

  I guess this is the reason why you get the error message: + "this application does not work on the current version of the system BIOS +.