Big Fan - but Let Down by ACR update

Similar Questions

• I said that Windows update to download all updates, but let me choose when to install them.

  I asked the question "I said that Windows update to download all updates, but let me choose when to install them."
  I thought that my problem was resolved, but the problem is still ongoing.

  The link to my previous question and answers is http://social.answers.microsoft.com/Forums/en-US/user/threads?user=Stew1957

  Please help, what else can be tried.

  PS I have since uninstalled MSE and installed Norton Antivirus 2011

  1. my hard drive has been formatted and re loaded from scratch.

  2. my opperating sytem is 32 Bit Win 7.

  Thanks stew

  To avoid confusion, please report all further follow-up replies to your original thread, stew: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3aeb2786-6fee-46e8-9d30-f54e1143a9e1

  Thank you!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Procedure to let Windows Installer update updates automatically, but leaving out a specific update.

  Hello

  I have Windows 7 Ultimate SP1 x 64.

  My Windows Update settings were always Install updates automatically (recommended)

  Later, I decided to define as updates but let me choose whether to install them. It's because I uninstalled the KB971033 update since my Windows 7 is not genuine.

  Anyway, now I'm wondering how to let Windows Update to install updates but leaving out the installation of the update KB971033. How do I do that?

  See you soon,.

  Francis UK

  I guess it's this one detail that make my non-genuine Windows. Is that correct?

  A copy of Lenovo OEM of Windows 7 has been installed on a PC laptop HP Presario CQ61. The Microsoft license only allows a copy of Lenovo OEM Windows to install on a Lenovo computer. Your installation fails this test simple and very basic. You must purchase a new authentic copy of Windows or to return to the original HP OEM of window which has been installed on the computer when it is new. You may still be able to buy HP's HP recovery discs.

• Satellite R630-155 - fan is too loud and SSD update

  I am the owner of a Toshiba Satellite R630-155 (Core i5-480). My problems are:

  1. the fan is too loud and never stops. In normal operation (navigation and General Office work) there is a constant high pitch noise which is audible three to four meters in a desktop - high load environment, you just can't take it anymore! The fan never stops... even when you do nothing...

  2. the heat is a big problem. The bottom of the laptop is overheated constantly and I have to place on my desk so that the lower left corner is outside the table, so it can breathe fresh air from below - otherwise, the temperature rises and the (noisy) fan is unable to follow. When I work with the laptop sitting on a couch, I place a thick book between the laptop and my legs. The book must be thick (more than one inch) with hard covers, otherwise the heat going through the book!

  3. last (but not least, I will mention the biggest problems here) that's the problem with the installation of the SSD. I bought a used Corsair F80 (80 GB SSD) from a friend, but I was unable to use it with the Toshiba - BIOS not detect the disc. I tried to install all the latest updates for portable and SSDS but I had no success. Then I put the disc and I bought a brand new Zalman 128 GB SSD (SSD0128N1 Sandforce) but I had exactly the same problem. I contacted my local support Toshiba and after much conversation, the only answer I got is that the laptop is not compatible with these SSDS, and it is acceptable by Toshiba and not their problem. They told me that if I need an SSD upgrade I cannot go for the Toshiba SSD that is installed on the portege series, which is sold by Toshiba for a ridiculously expensive price - about $500 for 128 GB. I contacted the European support center and I got the same exact answer. I searched the Internet and found someone else with exactly the same problem with a Corsair 128 GB SSD - he concluded that the laptop detects the SSD after ten to twenty resets. I tried and it was true - after a lot of restarts the detected disk Zalman laptop and I was able to successfully install Windows 7, but the process is unacceptable. Also the drive is rated by the sites official at the speed of an OCZ Vertex 2 128 GB (and a little better), but when I ran a cue point in the Toshiba, the results I got were less than half of the advertised speed. Same reference in another machine of the same disc, resulted in the announced speeds.

  Shame for Toshiba...-beautiful design and portability, but all the rest is a big flaw. Their support in non-existent and they do not appreciate their customers. According to me, they stole my money and I will never buy a Toshiba laptop again.

  Sorry for the big message, but I need, I warn potential customers. Can anyone help me with any of these problems? You also have the same problems?

  To follow...

  Hey Buddy,

  With regard to the issue of fan and the heat: you did it BIOS update? A friend told Satellite R630 too and he told me that the fan with the new BIOS version 2.10 activity is reduced. In addition, the laptop is colder than before so I recommend to install this update. You can download the update of the BIOS here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before you start the update of the BIOS, you should consider the following tips:
  -Run update as an administrator only
  -Unzip all files from zip archive before launching the update file
  -Close all running programs as the antivirus and firewall
  -Make sure the battery is fully charged

  With regard to the SSD it s still a little complicated to install 3rd party products and no one can guarantee that these parts would not work. You're always on the side safely with original spare parts from Toshiba.

  All you can do is to install the new firmware for SSDS and hope that it works, but who knows maybe the BIOS update will help you also in this case ;)

• The dc7600 fan not slowed down speed

  I'm new here but I have no news for the repair of computers, a problem which therefore left me speechless!

  A customer brought me a Hp DC7600 SFF desktop computer and said that the thing is so loud it doen't want to use it.

  Card"Pentium 4 3.00 Ghz

  2 GB DDR2 533 memory

  320 GB HD

  Win 7

  I lit and was swept away, this thing is so strong that you does not think!

  I disconnected the chassis fan that he calmed down some but the CPU fan turns at 5400 RPM all the time, I can't get the fans to slow down! I tried to use the program Speedfan, it was a joke.

  I am at a loss for what to do and wondering if something on the Board that controls the speed of the fan go haywire. I also upgraded to the latest BIOS and that did nothing.

  When the computer starts, it seems frankly a small liquidation aircraft prepares for take-off!

  What to do, what to do? ANY suggestions would be most appreciated.

  Thank you for your comments/ideas and suggestions. I would recommend he get a newer system because I think it's history! We have done everything that we can and it's time to throw in the towel! Thank you so much!

• kb2707511 shows that it is installed but appears always that the update is ready to be installed.

  kb2707511 shows that it is installed but appears always that the update is ready to be installed. I uninstalled it down loaded the file and reinstalled, still the same thing, Fix - it Ran no problem detected, a suggestion? Windows xp home Service pack 3

  I also ran my anti-virus (AVG) Spy bot S & D, Microsoft Safety Scanner program and no problem found in none of the scans.

  I just want to update my post, I installed the kb2707511 update in the safe mode and so far he has not yet presented. Keep your fingers crossed that it does not yet appear. Thanks to all the people on this site that help people.

• every time that the computer shuts down, (IE Automatic updates), recent documents is empty.

  original title: recent documents: every time that the computer shuts down, (IE Automatic updates), recent documents is empty. How do I prevent this? Very frustrated Ruth

  Recent documents: every time that the computer shuts down, (IE Automatic updates or I turn off during the night) recent documents is empty. How do I prevent this? Don't know if the following has nothing to do with it, but - about 6 months ago I reinstalled XP, since then I have no sound and comes to the foregoing. Oh and to add, at the same time, I've changed hard drives up and down, which means that I have and that he had 2 hard drives.

  Very frustrated Ruth

  Hello

  Try the steps below to solve the problem.

  Caution:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  (a) open the registry editor and navigate to:

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer-advanced

  (b) save the key in a file. See the article of support upward.

  (c) the value of Start_ShowRecentDocs as a result.

  (d) value of 0 - list of my documents most recently opened is disabled
  Value 2 - list my most recently open documents is enabled

  Note: set the value to 2.

• will not let me run the updates so I can't even install norton

  loaded the only windows service pack for xp one, I had. but now won't let me run the updates so I can't even install norton. He says I need service pack 2 at least, but can no longer update this do I?

  I could ask why you are not being updated at least SP3, but I guess that's another story.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Shut down and install updates

  I am running Vista 64 bit.

  I got a ToolTip hovering over my close icon that said Shut Down and install updates.  So I clicked it, noticed there are several updates to install and walked off to go do something else while it has been updated.  After it updated, it will turn off.  Now when I hit the power button to turn the PC on his saying to check my boot device or change my startup location and press a key to continue.  I tried to use my vista cd to retrieve and repair the safe mode, but it does not find my hard drive!

  I guess what I need to know is, in fact the process of update killed my hard drive?  I can get it back without cracking open the case and replace my hard drive?  And if I need to replace my HARD drive how can I recover my data?

  Hello

  1 did you receive an error message?

  2 are you able to start your computer in normal mode?

  3. are you able to boot in safe mode?

  4. the repairs were finished with success?

  Method 1:

  I suggest you get into the BIOS and check if the drive is detected

  Enter the bios and check the first boot device and make sure that the hard drive is set as the first boot device

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  I also suggest you to communicate with the computer manufacturing and check

  Method 2:

  I also suggest you to follow the link and check.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  
   http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Could not load down the windows update - 8007371b error code

  original title: can't down load windows update

  LM updating my windows but get a failure code which is 8007371 b can all help me to solve this problem for my windows vista thanks

  What virus protection software is installed?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/update-for-Windows-Vista-kb2505189-platform-update/04987dc4-8081-E011-9b4b-68b599b31bf5

• ENVY 100 printer D410 - screen says "Do not, power down during the update" permanently.

  I'm a Mac user Mavericks 10.9.1 running on a Mac Book Pro.

  I have a HP ENVY 100 D410 printer that works your for a few years.

  Recently, the LCD screen of the display on the printer offered, "there is a new driver. You want to update? "(Yes/no)

  (Or something close to that.)

  Unfortunately, I chose 'yes '.

  The printer then tried to update, but eventaully the LCD screen on the printer displays a flashing message:

  "Do not feed, down during the update"

  The printer now flashes just this screen continuously. The LCD screen will not display anything other than this message.

  The printer works when connected by cable and wireless. (Airprint works very well).

  I can scan documents, I can print pages, I can even access printers "Web page.

  But the LCD touch screen control panel is 'stuck' in flashing update message.

  I can't find any way to clear this error and allow the printer to complete the update.

  Help. Please, I beg you.

  Hello

  There is a fix to resolve the specific problem, but I'm afraid it is only available for earlier operating systems under OS X 10.5 and 10.6, Windows XP, Vista or 7.

  I you suggest to get a computer with any operating system supported, install the latest version of the software on the HP site using a USB and then follow the steps.

  The latest version of the software can be found below (the basic software should be sufficient):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4062&product=4073738&softwareitem=MP-92513-1&sw_lang=&

  Make sure that you carefully go through the procedure to the installation section in the patch download page.

  Hope that helps,

  Shlomi

• Message "do not power down during the update"control panel screen not fade.

  Product name: HP ENVY 100 e - All - in - One Printer D410a

  Product no.: CN517A

  The message "Do not power down during the update" on the control panel of the printer refused to erase and remained perpetually disaloowing acess the Menu home for other actions as photocopies etc.

  I see.  I found this utility that will help you to solve the problem.  It seems the printer lost connectivity during an update firmware and glitch out.  The utility should take care of it.  Let me know what happens.

• I have connected, but when I need to update apps, again request the password, but it does not work?

  I have connected, but when I need to update apps, again request the password, but it does not work?

  Birgitte salvation,

  Have you tried to enter your system password.

  Please let know if it still does not.

  Concerning

  Megha Rawat

• I have to stay with OS10.7.5 due to software compatibility, but is it possible to update Safari to latest version during your stay on OS10.7.5

  I have to stay with OS10.7.5 due to software compatibility, but is it possible to update Safari to latest version during your stay on OS10.7.5. How this is done. Thank you very much.

  It is not possible to update Safari past 6.1.6 on Lion.

  (144969)

• says I have emails, but not down load them - used to work properly

  says I have emails, but not down load them - used to work properly.

  For an example says that there download 1 / 6 after awhile, he says no new messages. I can check my email from another source and see that I have 6 messages and am able to read them. I ran scan programs and malware and clear up all the problems, they found that Thunderbird is not download again. I'm on the latest version 31.6.0

  This is probably one of these programs of malware or anti virus which is at the origin of the problem. Disable the e-mail in your anti virus and restart your computer. Best? What anti virus is it anyway?