Similar Questions

• Problems with Premiere Pro CS4: first use/installation

  I am a photographer. I have a Canon 1 d Mark IV, which takes HD video. I bought the Premiere Pro to edit video. It is installed without complaint. When it is called, it is VERY slow.  The first splash panel shows (purkle with "Pr"), but the long rectangle at the bottom is white without content.  After more time, the main window opens and then the boy in the window (to open a project, new project, help), but it does not display this content but is rather transparent right away to my paper painted (photo of my daughter).  If I take the small window and drag off screen and return the appropriate content then I can click on an option. From there everything is very slow and after each click, I have to drag the entire window off the screen, tap the screen to see the updated content.  If I import a .mov file I can go to play in the top left panel (I'm totally familiar with Pr at this point and excuse me for my lack of knowledge of the nomenclature) including reset at the beginning, etc.  But if I try to import more content via the bottom left panel, after every click of a choice of repertoire, I drag the window off the screen and come back to see the expanded choices.  This applies also to choose the codecs, frame rate and almost anything else.  It is, of course, unusable.

  I suspect it is a video card issue.  I am running Windows XP Pro on a core of two DuoCore 3.33 mHz with 4 GB of RAM and two Gigabyte 8800 GT cards and a relatively recent driver from the nVidia website. I have a RAID 1, RAID 0 and RAID 5 works disk system disk scratch to perhaps of 750 GB of free space. I run against viruses and malware as a software system for the defrag and registry mainenance maintenance, etc.  Most of the other Adobe products perform well including PS, Illustrator, Dreamweaver, etc..

  I don't know how to determine the cause of my problems.  I tried the Ko, but other than a few simple things, it is not very useful.  I hope that it is a well known symptom of something so if I missed it please just point me to what is necessary.

  On a side note, I will build a new i7 Win7 64 bit box this summer and would appreciate a pointer to where I can find the component builds that work well with Adobe Web Premium CS4 and Premiere Pro.

  How are your double vid-cards configured, SLI, Crossfire?

  The first thing I would do would be to get the latest driver for the nVidias.

  You're not sure if the blinds is available for Win 7, but you have? Update of the blinds has corrected similar problems.

  Good luck

  Hunt

• Problems with Premiere Pro CS6 and Media Encoder

  I have been using Media Encoder for months with Premiere Pro, but he has recently stopped working. It gets stuck trying to connect to the dynamic link and then fails.

  I tried to solve this problem for a while following the instructions online and I could have screwed up things. Is there a way to uninstall Premiere Pro and Media Encoder completely so I can reinstall them?

  I have a creative cloud subscription.

  First, select help > deactivate...

  Then just uninstall as usual.  After that, run the Script of cleaning of Adobe.  Restart and reinstall.

  https://www.Adobe.com/support/contact/cscleanertool.html

• Import. AVI with Premiere Pro CS4

  Hello

  I am trying to edit a video that I got from my digital SLR. It is in. AVI format.

  When I import it into Premiere Pro CS4 and tried to play. I can hear the audio, but the video does not play.

  I tried to install K-Lite Codec Pack but still the same.

  I used Gspot and it is said that codecs are installed.

  

  Hope someone can help out me.

  Have an installed CODEC is no guarantee that it can use to change an NLE program. This ARTICLE goes into detail.

  As John T., two popular versions of the MJPEG CODEC are the Morgan, or the MainConcept, but your DSLR could have come up with exactly what you need - but you may need to look on the included DVD. Camera mfgrs. Tweak often their particular and especially with the MJPEG CODEC CODEC. Who should be included, but it could be a separate facility, it can install with the driver for the camera or it could install with editing/organizing software. See this ARTICLE for a little more detail.

  Good luck

  Hunt

• Problems with Premiere Pro CC 2014 H.264 encoding

  After update for first Pro CC 2014 yesterday, I see encoding artifacts on my H.264 exports.

  Same video source v7 and CC v2014 imported and exported using the parameters of the YouTube 1080 p 29.97 fps. Artifacts manifests itself in the form of softness/blur in some parts of the image every few seconds, particularly notice the area with a red circle below.

  

  Here's the source (GoPro HERO3 Black Edition), the rendering of the v2014 file and make it v7.

  Original: https://drive.google.com/file/d/0B2rJe0xgMTxFYXJiMjZpZ0stUzQ/edit?usp=sharing

  CC v2014 render: https://drive.google.com/file/d/0B2rJe0xgMTxFQ1B0Z09GS3I0a1E/edit?usp=sharing

  Get CC v7: Premiere Pro CC.mp4 - Google Drive

  [Version numbers fixed.]

  Post edited by: Jim Simon

  This problem is resolved in the update that was released today (2014.0.1, aka 8.0.1).

• Picture-in-picture problem with Premiere Pro

  Hi - I am superimposing a number of clips on top of the other and using cultures, feather and opacity to mix them all together.  Everything looks and plays very well in Premiere Pro, but any export I try shows the edges of the full frame of each clip (where I reposition a clip) although I am strongly cropped in (and feathers) on each element.  Any suggestions on the way to the edge of the frame?

  Nick

  Yes, it's a bug - the cropping effect is broken if you apply transitions to the cropped clip. The nesting cropping effect is not aid, but you can fake the harvest by putting the images in a sequence with smaller dimensions, which will bypass the bug.

• Codecs to generate AVI with Premiere Pro CS4 files?

  I would like some feedback on which codecs you think are the best to generate AVI files. I tend to use Microsoft Video 9 or Indeo 5.10 for most exporters of my AVI, but I was wondering if there are traps with codecs that I don't know?

  My priority is the video quality, but I also care about how many compression, it is (IE, reduce to a minimum the amount of space is consumed on the hard drive), and I want to minimize the time required to export a media file to avi.  Are there other factors should I consider in deciding which codec to use?

  For what it's worth, I am running CS4 on a Windows XP computer.

  Here's what I observed in my tests...

  In the order of the smallest file avi (most compression) to the larger avi file (compression less):

  Microsoft Video 9

  Indeo 5.10

  Indeo 4.5

  Cinepak Codec (AVI is more than triple the size of the Indeo codec)

  Microsoft RLE (AVI is almost double the size of the one generated by the Cinepak)

  Microsoft video 1 (AVI is almost three times the size of that generated by the Cinepak)

  In order of time the shorter 'export' longer-term export times to a 13 second clip of test, with the codec on a maximum quality:

  Microsoft video 1

  Microsoft Video 9

  Microsoft RLE

  Indeo 5.10

  Cinepak

  Indeo 4.5

  As far as I can tell from the eye or video files, the quality that results is similar on all of them, but I'm missing something?  I must admit, I have not looked at the video and sound quality as carefully as I would like.

  Welcome to the forum,

  If the conversion program offers it (most do, but some do not), the DV - AVI (AVI specific flavor) w / PCM/WAV Audio to 48 kHz 16-bit, would be the best.

  Also, there may be something useful in this ARTICLE, even if it was written for PrElements and not PrPro.Still, perhaps a useful tip.

  I also recommend HD of Jeff Belluno to SD TUTORIAL.

  Good luck

  Hunt

• Problems with Premiere Pro download

  Hi, I just bought first Pro CC but I don't understand how I can download it to my computer. I have a mac book pro. When I download it, it only shows me video tutorials and cannot access the program. Anyone know what I am doing wrong?

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• problem with premiere pro trial cs6

  I downloaded everything, but when I launch an application in the adobe folder it asks me to sign in., and then he tells me there is no internet connection... but I don't have internet connection.

  someone please help. I have a lot of college work to do in the coming weeks with the first

  Hi scarlin123,

  Please visit: http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• No video in Premiere Pro CS4! Help!

  Hi, I had problems with Premiere Pro CS4. The imported video playback is completely black the moniter to source both the moniter of sequence. The audio plays perfectly fine, also when I change the display mode to one of the other modes they run also. It's just the composite video display is not working. I have the latest video drivers and first worked before. Y at - it something I am doing wrong is the first pro. I have only the 30 day trial and I reinstalled and updated. Please help before the 30 days has elapsed.

  Thank you

  Hello Vistafan01,

  I suggest you only to contact Adobe for problems with see video in Windows Vista on the first Pro.

  You can also watch the thses items fo rpremire Pro.
  http://PremierePro.Wikia.com/wiki/category:CS4

  If this does not help, I would say that you post in the Adobe Forums.
  Click here to post.

  It will be useful.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Premiere Pro CS4 hungs on importing or opening files

  Hello!

  I have a serious problem with Premiere Pro CS4. I have install on Windows 8, everything goes well. I create the first project and import mov files. First time I tried h284 Canon DSLR raw file. He played really bad. Secondly, I try AVID DNxHD mov, plays too slow, but everything is normal. But shortly after the first absolutely freezing. I restart, try to import the file or open the project with imported files (no matter what codec it is), it freezes again as before. And nothing helped. I tried to reinstall it about 5 times, it has no effect. What is c? Please, help me!

  P.S. I don't know it worked on Windows 7 with MOV of the Canon camera, but I was working with other codecs.

  Update. I found this problem described appears only with files DNxHD. regular H.284 causes different problem - during the first window loses focus (when I go to explorer, for example) first crashes, it's the window disappears and only strange red line stays on the screen. WTF?...

  Post edited by: Anri Orlow

  Need someone to help... more information please click on these links and provide the requested information

  -Information FAQ http://forums.adobe.com/message/4200840

  -Issues effective http://forums.adobe.com/thread/416679

  -How to find http://forums.adobe.com/thread/419406 help

  In addition, you may need to run CS4 in Windows XP compatibility mode

  Search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US to get help from windows procedures

• Premiere Pro CS4 and Adobe CS5.0 compatibility with Windows 8.1

  Hello.

  I installed Adobe Suite CS5.0 and Premiere Pro CS4 on a PC with windows 8.0 and work well. If am I on Windows 8.1 I'll find some compatibility issues the with these software ?

  Thank you very much

  I use CS5 with Win8.1 and have no problem, but cannot comment on CS4 (you may need CS4 right click and select Windows XP mode in the options window)

  You probably want to run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions... said again, but sometimes necessary for all Adobe programs

• Slow rendering in Premiere Pro CS4 (with a fast computer?)

  Hello people on the Adobe Forums,.

  I hope someone can help me with this issue, it has been bothering me a very long time now and this week I have to make a decision, or solve the problem and keep this configuration, or spend the money for a new processor (i5 750) and a new motherboard. But I think that this computer must do better, then he doesn't. I have the following configuration:

  AMD Athlon X 2 4600 +

  NVIDIA GeForce 7800GTX

  2 x 1 GB memory OCZ (250 mhz, DDR, PC2400)

  Storage disks:

  Seagate 320 GB SATA (7200 RPM, I think)
  

  WD 74 GB SATA (10,000 RPM, OPERATING SYSTEM)

  Hitachi 500 GB SATA (7200 too, I think)

  WD 1 TB (SATA) USB (hdd extern)

  WD 250 GB SATA (7200 RPM, I think)

  So I don't understand the problem, first is very slow on my computer... Rendering of a piece of 5 min of just a film randomly takes like 3 hours! Just now, I found some things that I shot with my cell phone, it like 10 sec 1 frame! On most pc with this vice versa!

  So the cpu is not only the former and nor is the video card, meaby memory is a bit weak... Could it be the problem?

  Hope that people can you help me, I searched Google and all but impossible to find someone with this problem...

  Software list:

  
  -Windows 7 complete edition

  -Adobe Premiere Pro CS4

  Drivers are, as far as I know, to date, I've updated Adobe programs also...

  Describe the source material, Codec: XDCAM-EX (mp4) movie

  But as I said, it happens too avi too, he thinks it was DivX...

  I bought this used pc, so it could be that something in the processor is already broken and I don't notice all the... I searched like everywhere and also tried to reinstall the program, but that does not work either...

  Some info:

  http://www.creadion.nl/premiere/info.jpg

  http://www.creadion.nl/premiere/info.nfo

  http://www.creadion.nl/premiere/Dxdiag.txt

  Ohye and the PPBM: http://www.creadion.nl/premiere/Output_PPBM4.txt

  With friendships.

  Marinus

  Marinus,

  My compliments on the way in which you have documented your problem! Very, very good. I wish that more people would take your example.

  Unfortunately, as you can see from the results PPBM4, your PC is a serious lack power. About 80 times slower than the top ensuring an and more specifically on the MPEG encoding. This means that, with your XDCAM, your machine hardware fights like h * l to get anything it to be delivered. Even with SD AVI material, it would be a struggle with these specifications.

  The only solution I see is to get a new machine. To get a rough hint of what you face. Watch Adobe Forums: how to build PC? and realize that the version of the budget is the minimum for DV and HDV, possibly material from XDCAM-EX, but for AVCHD and DSLR equipment you would not drop below the economic model. In addition, if you go to the hyarware forum and press the "View" tab at the top of the page, there a dropdown menu with several items that might interest you. http://forums.Adobe.com/community/premiere/hardware_forum?view=discussions&start=0

  BTW, on your new system you want to clean. With all the running processes, it adds to the burden and you could do with much less overhead.

• Effects of lightsaber using the dynamic link with Premiere pro and After Effects CS4

  Hi all

  I'm working on a video project and that you want to add a lightsaber effect, but a layer which is suppose to be transparent isn't using dynamic links.

  I shot the video in my head, and everything else hidden.  I made a flash body to put my head on.  Now I know how to make a lightsaber in After Effects CS4. (starting with comp 1 with videos making a white solid layer, and then using the tool pen to make the sword.  Then copy the sequences video and place it in comp 2.  Then to return to comp 1 and remove the video sequences. then on comp 1 making a SOLID BLACK LAYER {that's the problem} and place it under the layer of white.  Then duplicate the white layer 3 times.  Changing each feather white layer mask to make the glow.  so going to comp 2 and take the 1 model and her nest to model 2...  Then change the blending mode of the model nested 1 to the screen.

  The main timeline in Premiere Pro CS4 and I have the video layer 1 to Photoshop file which is pink and the background of this project.  I made a dynamic link to After Effects and copied and pasted the video images and flash to the comp.  Here, I made the lightsaber.

  That is the problem.  The model of dynamic links with video, flash and the lightsaber will not show my pink background in Premiere Pro shows him my video, flash and lightsaber but the background is black.  In case of problems, I noticed if I turn off the LAYER BLACK for the lightsaber effect, I see my pink background with video and flash sequences and the glow of sabre, but my blue lightsaber color will not appear.

  Do more problems I set photoshop to lightsaber model file and I see the video, the flash, the lightsaber but I think because the background is pink I don't get a color glow to the sword (vilot color)

  If the layer of black is supposed to be transparent, so why can't see my background in Premiere Pro using dynamic links?

  appreciate any help I can get,

  Thanks in advance.

  Mr. PETER K

  P. S. - one-way I kinda had this work was I took one of the masks of white and copied and pasted layers in nested layer comp 1.  Adjusted to the width of the mask and the pen and I got a glow of blue ok.  You just can't mask width too because it shows a lot of black.  It is not as good as I want and I hope someone can help...

  Thank you again...

  Well, blend modes don't create transparency, so the behavior is correct - because technically, the background of the model is ignored for the mix of operations, in areas where there are no content below for the mix, only the layer of black color is used. You create transparency good, real luminance based on unmultiplying, that can be done with the Knoll Unmult plugin Red Giant Software (free) or the effect of changing the channel of the AE monitoring bey a color delete effect.

  Mylenium

• Export of parameters (Premiere Pro CS4 with Matrox)

  Premiere Pro CS4

  Canon XHG1 camera (HDV/Mini-DV/NTSC)

  Card Matrox RT. X 2

  HP's Z800 with Intel Xeon 2.4 GHz, 12 GB of RAM and running Windows 7

  I have experience with digital video editing in first, export up to 40 minutes the videos (which took maybe 2 hours for export), but the last version I used was perhaps first 7 and I didn't have the Matrox card (and used a much less powerful than this computer). I used as just a level of consumption, not the big Canon camera. Now, I try to export the video and there are more choices that I had before, and it seems that the time estimated to export is quite high, despite a good machine and the Matrox card.

  So my question is, is there anywhere a chart that shows what settings to use for the particular output you are looking for? For example, what should I choose for the web that's enough quality but not a giant file? What should I choose if I want to make a DVD? Is it possible to export directly to a DVD, if you do not manipulate the video at all? I said, I should be able to use the Matrox card to reduce the time to export, but it seems that at least 5 times the length of the video export anything.

  I guess a question important here is: what is the normal amount of time I should expect something to take to the export? I have a 2 hour video that just needs to be transferred from mini DV tapes and engraved on a DVD - no necessary effect. Time to export the lowest estimate I can get is about 10 hours, and I don't know what that looks like in terms of quality when finished.

  In the future I'll do more often in short (2 minutes or less) video for the web, so time for export should be short, but I would still like to know what are the best settings and how much time it should take.

  I hope this makes sense - thanks for your help!

  Geneviève

  The major bottleneck appears indeed disk I/O.Even if you have two physical disks in the system, Win7 consider them as a single disc, because they are attacked as a raid1. For performance optimal disc I suggest you to add at least two physical disks + 7200 RPM (so SAS or SATA, the latter cheaper, the first with a best performance), move the pagefile and projects and the cache of media in one of the discs and the other disk media. Which will improve your results significantly in my opinion.

  Then have a look at the two latest guides here, storage and tuning: How to get the best from a PC? Some guides...

  The setting guide was written for Vista, but the Blackviper site now also has a guide for Win7 services.

  I hope this helps.