Equium L100 - problems of product recovery

Similar Questions

• Problem of product recovery

  Hello

  My system: W500 with windows vista x 64 and history: in addition to windows, I tried to install linux ubuntu, before doing anything I did product recovery discs and a hot spare - as advised on the linux forum. Windows Disk Manager only allows me to shrink C: drive by more than 1 GB (from 221 GB), so I used GParted from ubuntu live cd. I was warned that he could make vista ubootable and he did, based on ThinkVantage button initially made in the windows error message "Windows couldn't boot...". ', so I started from product recovery to restore the State of vista running. Now the problem: after insert second dvd and, a moment comes when he unzips the contents of (I think) save files, to the primary partition, and then a message appears:

  Windows cannot verify the signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or may be malicious software from an unknown source.

  When processing file: sdrivebackup.swm. I booted the cd of relief but it only alow me to restore a predefined backup of the system - which I did not.

  It turned out to be a hardware problem - processor or motherboard are faulty (memtest86 showed no error, whereas prime95 can run for 10 seconds without error).

• Equium A100-027: need product recovery disc

  Good afternoon

  I was wondering if you could help me at all the

  My A100 became really slow and unstable. So decided to use the product recovery disc, but found to be scratched.
  I tried to use a disc repairman but have had no joy.

  I have the original product recovery cd and good purchase is anyway to get a new drive of toshiba.
  The laptop was purchased directly from curries and is one year old.

  Any help would be appreciated.

  Thank you very much

  Hello

  Have you seen another thread here in the forum about the purchase of restore CD?
  I m what you did!

  So the solution is very simple! You must contact the service provider allowed in your country and to order a new recovery CD Toshiba laptop you.

  All that s!

• Satellite A80 - problem of product recovery

  Hello world!

  I have my Satellite A80-144 for almost 4 years now, but now my baby seems to be not more happy and were on strike. I have used my product recovery DVD-rom in the hope of bringing back the good old days No go!

  What are the lost areas warning or error partitions defined and all that blah, blah, blah, which doesn't help me a lot without YOUR professional opinion.

  Following all the instructions on the screen during the recovery procedure did not help. What should do? The hard drive is formatted now, but it does not start. Always a mistake.

  Help, please! Thank you very much!

  Hello

  > What are the lost areas warning or error partitions defined and all that blah, blah, blah,.
  According to the statement, a HARD disk failure is possible.
  You receive a message about lost areas and damaged partitions and in my opinion, this is displayed because the HARD drive is not ok.
  If you can try to format the HARD drive, but that won't help I recommend to replace the HARD drive

  Welcome them

• Equium A60-173: need product Recovery DVD-Rom

  Hey guys, I was wondering where I can buy a product recovery dvd - rom for my laptop and if there is an online shop can you please provide a url?

  Thanks in advance.

  Hello

  The only place where you can order the original Toshiba Recovery DVD is authorized service partner. Please check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Equium L40 problems using the recovery disk

  Hello

  I wonder if anyone can help me?

  I want to restore my computer but when I put the recovery disk in I select the cd/dvd rom drive by pressing f12 at startup.
  I also maintained pressed C when I lit. I select the disc I want to start the computer, it goes to a black screen, then it loads just windows up as usual.

  I phoned with Toshiba for help and all they could tell me was that as another drive worked on my computer, it isn't a problem with the disk drive, but a problem with the disc and it will cost me 30 quid for a new!

  Is anyone able to give me any help

  Thank you

  Hello

  If I understand your message, you are not able to recover the laptop using the Toshiba disc. Is this good?

  Well, in your case I recommend to start from another original Windows XP CD bootable disc or Vista DVD or a Linux drive to test if the CD/DVD drive can handle this drive.

  In this case, you can test if your CD/DVD drive is faulty or if the problem is related to the Toshiba DVD recovery.

  Welcome them

• T60 problem of product recovery

  
  

  Maybe this would be the best option for you down to the depot of Lenovo and use their CDs get up your stuff and in the course of execution, then make a copy of their records.

• Problems with product for Satellite L450 recovery

  Hello

  I had a big problem with my L450 D and was advised by the provider of the guarantee to use the product recovery disc. I did it but I can't pass the following command:

  x:\Windows\System32 >

  Can someone tell me what this means and how I can get past to continue with the recovery of the product on my laptop please?

  Thank you very much

  Hello

  have you tried to restore from image of hard drive?

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• Recovery satellite L100 problem

  Hello

  My laptop model is Satellite L100 and I need to reformat average recovery there. I had a disc that when I bought came with laptop

  "Satellite L100/Satellite Pro L100.
  Set of recovery DVD-ROM
  Windows XP Home Edition SP2.

  I insert the recovery DVD and start it's work.

  The black background with the word

  "Loading RAMDISK image..."

  After that...

  "Please wait."

  At the moment, I saw my pointer and portable auto restart.

  I tried several times but still the same problem.

  Is any solution to this problem?

  Thank you very much
  Raymond

  To offer a solution, we need to know exactly what happens and on this path is not easy to say why the installation of recovery stops on this point.

  Is recovery DVD OK? I mean is clean and scratch free DVD?
  Enter the BIOS settings, set the default value and try again.
  If the same happen again try to get original Microsoft installation disc and check if the installation starts fine (HARD drive should be recognized).
  You can also try to get another HARD drive and check if the installation stops on the same point.

  It's really not easy to say what the problem is here.
  Do you use DVDs of recovery for the first time?

• Re: Satellite Pro L100 - where to get the product recovery DVD

  The DVD of my Toshiba Satellite Pro L 100 product recovery was lost. Can someone tell me how to get (or download) a new copy?
  Thank you very much.
  Bert van Herk

  You can not download the recovery DVDs. But you could ask local ASP or order directly from this place:

  http://backupmedia.Toshiba.EU/landing.aspx

  Have a try.

• Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

  Hello

  I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

  Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

  and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

  Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

  Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

  waiting for ODD vacancies...
  STRANGE drive f: loan.
  Look for support in the F: drive...
  Failed to initialize the raid class.
  No RAID - continue normally...

  X:\Windows\System32 >

  Now every time the laptop trying to restart it just comes up with the error message:

  CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
  CAUSE
  FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
  STATUS: 0XC000000E
  INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
  IS MISSING OR DAMAGED

  Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

  The recovery disc has no option of repair on this subject.

  need help please, I have no idea.

  Thank you

  Hello

  Looks like something was wrong during the recovery procedure.
  Have you tried to recover the laptop once more?
  If this isn't the case, you should definitely try this!

  You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

  So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

• Equium L100 - 186 (PSLA5) - need all drivers XP

  Hi all

  I really need help!

  I start formatting quick Windows and reinstalled using the standard recovery procedure and am now looking for the correct drivers. I understand that I should have the air for pilots before recovery, however...

  I visited the driver from Toshiba Web site page and chose the following options...

  PRODUCT - laptop... Family - Equium... Products - series Equium L... Model - Equium L100 (PSLA5... Operating system - XP

  Now on this research on the whole it appears 2 drivers... BIOS at day & Wireless Lan driver

  I am looking for a set of drivers for windows xp. There are plenty of vista drivers but I for that reason assume that they will not support my operating system (Windows XP Home)?

  I need help guys I need to get this laptop up and ongoing enforcement for my dad, I need help:
  (1) a list of all the drivers I need is for the sound card, display, paved touchscreen, WIFI and all the others I need her to the level of functioning and
  (2) sites to download these drivers for Windows XP Home edition.

  If someone can suggest where I can get a drivers disk and utilities who is another option.

  Help me please if you can

  Thank you

  Scott

  You are right. I found that two files XP on Toshiba's European site. BIOS and XP WLan driver.
  I imagine that several XP drivers are not available (released) for this satellite series.

  But wait the guy. Maybe there is a light at the end of the tunnel
  Satellite L100 series is very similar to the Equium L100 series.

  You may want to use some unique Sam series XP drivers? Check it out.

  Good luck

• Product recovery CD's install German WXP

  PRODUCT RECOVERY CD INSTALL GERMAN WINDOWS XP.
  I can't change Windows XP to British English.
  My Tecra 9100 was purchased from the United Kingdom and is the UK version PT910E-5XPZF-EN.
  I then installed XP from a different CD and it was evenly divided HD in C & D drives with the German version on C and D on UK version.

  H-E-L-P please!

  Hi Vic

  Just no panic please. I hope that we can find a solution to your problem. First of all, I want to know how you want to configure the laptop exactly.

  It will also be interesting to know if this different CD was German-speaking and if it is a full installation of Microsoft CD and NOT the restore CD.

• Tecra S1: Step by step how to reformat HARD drive by using the product recovery CD

  OK guys, I'm about to return my lease (Toshiba Tecra S1); because the video card is 'us' and I would like to reformat the drive and return the system to its original state by using the "product recovery cd-rom provided Toshiba."

  My problem is that the video card is on the right track and using windows is a challenge quite like its like watching a patchwork blanket. So, when you try to use the recovery of product cd-rom, I can just not read the screen "its comparable to the matrix.

  I really need a tutorial step by step with screenshots at each step 'a map of the fool '. Can anyone help.

  Thanks in advance,
  Robsta

  Hello Robsta

  Believe you did not need the step by step tutorials or shoots screen. The recovery procedure is very simply.

  Put the recovery CD in the CD/DVD drive
  Turn on the laptop and keep C button for a few seconds
  Follow the menu on the screen
  Choose option 1 for installation in Standard mode and just follow what is happening on the screen

  All that s!

• Satellite L30-PSL33E - product recovery fails

  Laptop Satellite / L30-psl33E

  This is what happens:...

  Product recovery disc boots, loading files, windows recovery watch utility box select English, then gives possibility of partition of drive or any use, I click to recommended any disc, then computer past the black screen, delete the partition 0, erasure of partition 1. * error...
  (error creating file\\./physical drive0, the system cannot find the file specified),
  hard drive # 0 is not accessible or bad raid configuration.
  * Then an administrator opens upward *:... part of disk failed, has not the raid class, press any key to continue, * I press a key, *, the computer hangs, press a button again, another box of Directors appears with the command line.
  x:\windows\system32\cmd.exe,

  Nice anyone got advice or tips, thanks

  It's very strange

  The error message says something about RAID but the L30 does not support the RAID and also the RAID drivers are not necessary.

  I m a bit confused and I think there could be something wrong with the HARD drive.
  Have you tried to reinstall the operating system from the original CD of Microsoft Windows?

  Try this format the disk using this CD, and then try again to reinstall the operating system.

  If this does not work then a HARD disk problem is possible