Big problemm HP COMPAQ NX6125 ML-40 CPU

Similar Questions

• I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

  I need to reinstall xp on my nx6125

  I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

  Hello

  Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
   
  If you face any problem regarding the installation of Windows XP.
  You can contact our Windows activation service.
  Here is the link:
  http://support.Microsoft.com/kb/950929 

• BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  found in the security system] [, thanks]

• HP Compaq dx2300 format microtour CPU Upgrade requires the bios update

  Hey, my Hp compaq dx2300 format microtour came with a core2duo E4400 processor, I had an E8400 CPU because they share the same socket LGA compatible on the motherboard and it fits perfectly, only the pc does not start, then read around some sites say it is supported by my MSI motherboard A 0, 90, others only reported up to E6700 what I don't understand, is why it wouldn't work? I BIOS v1.14 (latest news on the list of dated drivers '2008'!) and can't seem to find a solution for this, please tell me what to do I don't want to be stuck with a CPU, I can't use cause it isn't a way to map mother read it, thanks in advance!

  Hello:

  Unfortunately, you're stuck with an E8400 which won't work in this PC.  See page 4.

  Here are links to the quickspecs for your model.

  http://h18000.www1.HP.com/products/QuickSpecs/12668_na/12668_na.PDF

  An E8400 processor will not work in any case with x chipset Intel 94 or 96 x chipset.

  In order to run an E8400 into a PC, there need an Intel 3 series chipset or 4 of the series.

  Of course a processor must adapt to an outlet, but is not the only criterion needed to make it work.

• Compaq Presario CQ60-210el: cpu compatibility

  Hello. I am looking for a new processor for my Compaq Presario CQ60-210el, but I'm totally confused. I'm looking for the best processor that my computer support, can you help me?

  (this is the report of cpu - z, maybe that this can help)

  Chipset
  -------------------------------------------------------------------------

  Northbridge Intel GL40 Rev 07
  Southbridge Intel 82801IM (ICH9-M) Rev. 03
  Memory type DDR2
  Memory size 4 GB
  Double channels (symmetrical)
  Frequency memory 332,5 MHz (3:5)
  Latency CASE # (CL) 5.0
  RAS # for CASE # delay (tRCD) 5
  RAS # Precharge (tRP) 5
  Cycle Time (tRAS) 15
  Host Bridge 0x2A40

  Memory SPD
  -------------------------------------------------------------------------

  DIMM # 1
  SMBus address 0 x 50
  Memory type DDR2
  Format of SO-DIMM
  Manufacturer (ID) A-Data Technology (7F7F7F7FCB0000000000)
  Size 2048 MB
  Bandwidth Max PC2-6400 (400 MHz)
  DOVF1B163BE part number
  Manufacturing date week 42/year 08
  Number of banks 2
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  AMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  DIMM # 2
  SMBus address 0 x 52
  Memory type DDR2
  Format of SO-DIMM
  Manufacturer (ID) A-Data Technology (7F7F7F7FCB0000000000)
  Size 2048 MB
  Bandwidth Max PC2-6400 (400 MHz)
  DOVF1B163BE part number
  Manufacturing date week 42/year 08
  Number of banks 2
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  AMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  Monitoring
  -------------------------------------------------------------------------

  Model of motherboard 3612 (0x000000CC - 0x000021F0)

  LPCIO
  -------------------------------------------------------------------------

  DMI BIOS
  vendor Hewlett-Packard
  version F.32
  day 11-20-2008
  ROM size 2048 KB

  System DMI information
  Manufacturer Hewlett-Packard
  PC product laptop Compaq Presario CQ60
  version F.32
  series 2CE850DYPD
  UUID {604396EE-DBD0-DD11-85F2-92ECD7B3AEFF}
  SKU NJ840EA #ABZ
  family 103C_5335KV

  DMI Baseboard
  seller Wistron
  model 3612
  revision 09.48
  series 2CE850DYPD

  DMI system box
  Manufacturer Wistron
  chassis type Notebook
  chassis serial number of chassis

  -hope this will be useful-

  There isn't any processor update for you that will be worth the effort. The one you have is 2 GHz and the T3400 2.16.

• Compaq presario cq62-219wm cpu update

  We have a laptop, compaq presario cq62-219wm. Intel celeron 900 to 2.2 ghz (800 mhz). Windows 7-64 bit o/s. y at - it a cpu I can go to for this laptop? the celeron is a w/single core wire I think. I would switch to a dual-core (at least) if possible. How can I find a list of processors that can I update? the model number is WQ778UA #ABA. the serial number is *. any help would be appreciated.

  davidljtn44

  You can virtually none of the PENRYN 45nm lithography processors put in it, the optimal processor, you can upgrade is the Intel core 2 duo t9500. I have the same laptop and I have the next step down from what is the Intel core 2 duo processor t9300. There is no complete list of the processors that it will support the lists that you will find are incomplete at best even Intel does not update their information. Go to intel.com and search PENRYN in a search more people you can use, you need to compare to ensure that.

• Compaq Presario C555NR Notebook CPU

  Hi all

  I have a laptop Compaq Presario C555NR. I think about upgrading the processor to something better. Right away

  It is a Celeron M 1.6 GHz clocked.

  This question, I asked Compaq and downright they told me that this laptop CPU cannot be upgraded. Until I give up,

  I would like to ask those of you who have this laptop, if you were able to upgrade the processor and what spend you

  TO? In addition, any idea that the best processor, it's that this laptop can support and instructions to upgrade?

  Thank you!

  I'm not quite as negative as infernoman but it is essentially correct. Portable versions of Celeron from HP computers generally have a different motherboard, and you cannot install a Core 2 Duo or Pentium because speedstepping function is not supported by the motherboard. Celeron not speedstep. You can install a faster Celeron, but why bother? It is not something for a novice to try to do. Just sell your laptop and buy a better one than you will always before an upgrade of the processor.

• Turn Compaq/HP CQ5102F: swapping CPU

  compaq cq5102F motherboard will support a chip intel pentium dual core e5200

  Jethro62, welcome to the forum.

  Here is the processor that have been tested by the motherboard support:

  • This motherboard supports only the AM3 processors

• Compaq Presario CQ57 - 411TU CPU processor or graphics card update

  I was wondering if I could upgrade graphics card or my CPU processor. It seems that a lot of games I play on this shift of mobile as hell, so I was wondering if I could spend an of these. Thank you. FYI its games as COD hanging like hell and some games that need changed mipmap settings the graphics card cannot change a few pieces of the game is fuzzy (not to die of hunger).
  
  CPU: Intel Celeron B815 clocked at 1.6 GHz

  Graphics card: GPU Intel(r) HD

  There is not really a valid upgrade for you option. Has a Celeron processor models also have a motherboard which do no accept a Core (i3, i5, etc.), so you are stuck with maybe a little faster but still lame processor but nothing that will get you where you want to be. The video is a complete non-starter. There is no way in the world to do something with it. Your laptop is to make the work of the office and internet and your best bet is to sell and get something with a graphic power and treatment.

• HP Compaq nx6125 frooze the HP logo with option F10 BIOS

  Help!

  My nx6125 loads in the Hp logo with the F10 option on the bottom left and does nothing else. Took everything except the keyboard and screen of a ram card (256 MB) and always made the same thing.

  F10 doesn't let me access BIOS setup. Laptop emits a noise while on this screen.

  The BIOS is damaged? How can I go about installing a new BIOS?

  I have a USB external floppy drive if that's any help.

  Thanks in advance.

  Hello

  orionburst wrote:
  

  Ok

  Vice versa, battery removed, reassembled and still the same results.

  The BIOS chip can be removed and work one installed?

  Steven

  Laptop/netbook/laptop PC have usually one welded in the BIOS chip is not as simple as with a desktop PC.

  It can be done in a place of repair BIOS if your laptop is out of warranty.

  You can replace the motherboard yourself.  There are replacement MB available at lower cost than their purchase of HP.  Down the number of the MB if you want to open again. Do a google/bing search to find a source of reasonably priced.

  Kind regards

  ERICO

• Compaq EVO D510 SFF: Compaq EVO D510 SFF CPU Upgrade

  I'd like to update this pc cp and would like to know if it is compatible

  Intel Pentium 4 3.06GHz 512 KB 533 MHz SL6PG/SL6NN Socket 478 CPU processor

  Hello:

  You should be able to switch to this processor, but if you have older motherboard review, hyperthreading will be not supported in BIOS.

  Apparently there were two revisions of the motherboard used in the d510 and the other older does not support hyperthreading, and later review.

  All posts related to this topic on the forum of HP enterprise business community support have been removed.

• Compaq Pavillion 2190us: have CPU, but it won't work...

  I spotted for a long time and eventually find a processor upgrade. It matches all the details required for my motherboard, but it does not start. I need to upgrade the BIOS to include the NX/XD switch if I finally get upgraded to win 8.1, but the news is a processor intel core Duo 2.6 and I will be replacing is a Celeron 2.4 burned. The fsb, watts, etc. are compatible for the Council, but I can't installed in front of a flash start upward after the installation of the mobo. Yes, I used the Device Manager and not the Itel driver tool does not work because it throws a 0 x 800 - code ec-Asia and rejects .net 4.5. I already have a CD upgrade available, but it is Windows 8 before they stopped selling it, and the upgrade to 8.1 comes french store.

  Hello

  What is your new CPU? Your machine doesn't support:

  Intel Pentium 4-M (1.8, 1.9, 2.0 - and 2,2 GHz)
  Intel Pentium 4-D (2.53 GHz)
  Intel Celeron (1.6, 1.7, 1.8-, 2.0 - and 2.4 GHz)

  More information: http://h10032.www1.hp.com/ctg/Manual/c00246219.pdf

  Kind regards.

• Compaq Presario S5010IL PC: CPU fan error

  My CPU fan has failed. I replaced it with a new fan. Her works very well. However, I get the CPU fan on startup error message. After pressing the F2 key, the computer starts up and is great for the long hours of work. While trying to determine the cause of the error message from the BIOS, I found that there is nothing to select the advance tab. I want to know why this error message appears whenever I start the machine and how to solve it.

  The new fan should equal the "rpm" of the old fan. If it's slower, you this warning. If its too slow, the computer will stop.

• HP Compaq dc7800 Convertible M: CPU update for HP Compaq dc7800 Minitour Convertible

  I have a hp dc7800 cmt computer intel core 2 duo e6550
  
  I bought Brosissour e8500
  The installation seems to me that the problem
  "microcode update error".

  Hello:

  The E8500 must have worked.

  I suggest that you update the BIOS to the latest version.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3459248 & swItemId = vc_97114_1 & swEnvOid = 4059

  Since you are using W8.1, you will have to flash the BIOS using the method based on the BACK.

  Not only run Windows based BIOS flash.

  Before update you the BIOS, remove all that that can be connected to the PC, except the keyboard, mouse and monitor.

  There is a flash ROM control system contained in the file menu in the BIOS.

  You will need to format a Flash DRIVE with the FAT32 file system.

  Download and run the BIOS to support dc7800 page was last updated.

  An information page will open and show you the different methods to Flash the BIOS.

  What you want to do is to use the instructions F10 Setup of the BIOS flashing .

  This article, you click on the blue link BACK Flash directory and this will bring you to the bottom of the page to another blue link that is labeled View of BACK Flash content folder.

  Copy the contents (files) in the folder flash BACK to your USB.

  Plug the USB key into one of the front USB ports.

  Restart the computer and press the F10 key to enter the BIOS.

  Select the file Menu.  Then in this menu, there is a Flash ROM of system command.

  What to choose, and then select USB and PC should see the files on your USB flash BIOS.

  Follow the instructions to update the BIOS.

• Compaq Presario CQ62-219wm: CPU Upgrade - Presario CQ62-219WM

  I'm looking to upgrade the processor in this laptop as the base processor (the processor Intel Celeron 900 2.2GHz) is simply not enough for my needs.  I did my own research and I found (to be confirmed) this list of compatible processors purportedly in the service manual for my laptop. However, I have some questions and concerns.  Here are few of those who are supposed to be compatible with my specific system:

  Processor Intel Core i7 - 620 M (4 MB cache, 2.66 GHz, turbo SC up to 3.33 GHz frequency) 587259-001
  
  Processor Intel Core i5 - 540 M (3 m cache, 2.53 GHz, turbo up to 3.06 GHz SC) 594188-001
  
  Processor Intel Core i5 - 520 M (3 m cache, 2.4 GHz, turbo up to 2.93 GHz SC) 594187-001
  
  Processor Intel Core i5 - 430 M (3 m cache, 2.26 GHz, turbo up to 2.53 GHz SC) 597624-001
  
  Processor Intel Core i3 - 350 M (2.26 GHz, 3 m cache) 597623-001
  
  Processor Intel Core i3 - 330 M (2.13 GHz, 3 m cache) 597622-001
  
  Processor T4300 Intel Penryn (3 m cache, 2.1 GHz) (only for model 1.1) 572929-001
  
  Intel Penryn T3100 processor (3 m cache, 1.9 GHz) (only for model 1.1) 572925-001
  
  Processor T4400 Intel Penryn (3 m cache, 2.2 GHz) (for models 1.1 and 1.2 only) 584296-001
  
  Intel Penryn T3300 processor (3 m cache, 2.0 GHz) (for models 1.1 and 1.2 only) 592399-001
  
  Arrandale Pentium P6000 processor (3 m cache, 1.86 GHz) (for models 1.1 and 1.2 only) 613586-001
  
  Processor Pentium P6100 Arrandale (3 m cache, 2.0 GHz) (only for model 1.2) 613587-001
  
  Processor T4500 Intel Penryn (3 m cache, 2, 3 GHz) (only for model 1.1) 591880-001
  
  Processor Intel Core i5 - 450 M (3 m cache, 2.4 GHz, turbo up to 2.53 GHz SC) (for models 1.1 and 1.2
  only) 613585-001
  
  Processor Intel Core i3 - 370 M (3 m cache, 2.4 GHz, turbo up to 2.53 GHz SC) (for models 1.1 and 1.2
  only) 613584-001
  
  Processor Intel Core i5 - 560 M (3 m cache, 2, 66-3, 2 GHz, SC) (for version 1.2 turbo up to 2.53 GHz
  only) 625824-001
  
  Processor Intel Core i5 - 460 M (3 m cache, 2.53 GHz, turbo up to 2.53 GHz SC) (only for model 1.2) 626039-001
  
  Processor Intel Core i3 - 380 M (3 m cache, 2.53 GHz, turbo up to 2.53 GHz SC) (only for model 1.2) 625823-001
  
  Intel Pentium P6200 processor (3 m cache, 2.13) (only for model 1.2) 625831-001
  
  Intel Core processor i5 - 580 M (3 m cache, 2, 66-3, 33 GHz, SC) (for version 1.2 turbo up to 2.53 GHz
  only) 625825-001
  
  Intel Penryn T3500 processor (3 m cache, 2.1 GHz) (only for model 1.2)

  ______________________________________________________________________

  Apparently, all of the aforementioned processors are compatible with my system, but some are only compatible with some models (model i.e. 1.1 and 1.2).  How can I determine which model I have and what processor will give me the best output for my money?

  As always, any help would be greatly appreciated!

  It may "work", but as I said the GL40 simply has no circuits to take full advantage of the advanced features of the high range processors. Also no he don't mention not all i-series processors in the list. They are all Core 2 Duo T4200 except. Your Celeron 900 is one heart. Even a Pentium dual as say the T4200 will be much better and will be fully compatible with the GL40 chipset and very cheap to start.