Compaq Presario S5010IL PC: CPU fan error

My CPU fan has failed. I replaced it with a new fan. Her works very well. However, I get the CPU fan on startup error message. After pressing the F2 key, the computer starts up and is great for the long hours of work. While trying to determine the cause of the error message from the BIOS, I found that there is nothing to select the advance tab. I want to know why this error message appears whenever I start the machine and how to solve it.

The new fan should equal the "rpm" of the old fan. If it's slower, you this warning. If its too slow, the computer will stop.

Tags: HP Desktops

Similar Questions

  • CPU fan error message and no response from F10

    Just upgraded to Phenom 11 4 810 processor in my desktop PC Presario CQ5320Y with Windows 8.1. Stop and Get CPU fan error message. Replaced the fan and still have the same problem. Read forum on this subject article, but can't get into the BIOS by pressing F10 to check the settings, etc., any suggestions?... Thanx.

    Thanks for the answer and I have solved the problem that has been in my stupidity had plugged the cpu fan into the chassis on the crowd fan after moving there that everything works correctly. Thanx.

  • Compaq Presario CQ60-210el: cpu compatibility

    Hello. I am looking for a new processor for my Compaq Presario CQ60-210el, but I'm totally confused. I'm looking for the best processor that my computer support, can you help me?

    (this is the report of cpu - z, maybe that this can help)

    Chipset
    -------------------------------------------------------------------------

    Northbridge Intel GL40 Rev 07
    Southbridge Intel 82801IM (ICH9-M) Rev. 03
    Memory type DDR2
    Memory size 4 GB
    Double channels (symmetrical)
    Frequency memory 332,5 MHz (3:5)
    Latency CASE # (CL) 5.0
    RAS # for CASE # delay (tRCD) 5
    RAS # Precharge (tRP) 5
    Cycle Time (tRAS) 15
    Host Bridge 0x2A40

    Memory SPD
    -------------------------------------------------------------------------

    DIMM # 1
    SMBus address 0 x 50
    Memory type DDR2
    Format of SO-DIMM
    Manufacturer (ID) A-Data Technology (7F7F7F7FCB0000000000)
    Size 2048 MB
    Bandwidth Max PC2-6400 (400 MHz)
    DOVF1B163BE part number
    Manufacturing date week 42/year 08
    Number of banks 2
    64-bit data width
    Correction no
    Nominal voltage 1.80 Volts
    EPP no
    XMP no
    AMP no
    Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
    JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
    JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
    JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

    DIMM # 2
    SMBus address 0 x 52
    Memory type DDR2
    Format of SO-DIMM
    Manufacturer (ID) A-Data Technology (7F7F7F7FCB0000000000)
    Size 2048 MB
    Bandwidth Max PC2-6400 (400 MHz)
    DOVF1B163BE part number
    Manufacturing date week 42/year 08
    Number of banks 2
    64-bit data width
    Correction no
    Nominal voltage 1.80 Volts
    EPP no
    XMP no
    AMP no
    Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
    JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
    JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
    JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

    Monitoring
    -------------------------------------------------------------------------

    Model of motherboard 3612 (0x000000CC - 0x000021F0)

    LPCIO
    -------------------------------------------------------------------------

    DMI BIOS
    vendor Hewlett-Packard
    version F.32
    day 11-20-2008
    ROM size 2048 KB

    System DMI information
    Manufacturer Hewlett-Packard
    PC product laptop Compaq Presario CQ60
    version F.32
    series 2CE850DYPD
    UUID {604396EE-DBD0-DD11-85F2-92ECD7B3AEFF}
    SKU NJ840EA #ABZ
    family 103C_5335KV

    DMI Baseboard
    seller Wistron
    model 3612
    revision 09.48
    series 2CE850DYPD

    DMI system box
    Manufacturer Wistron
    chassis type Notebook
    chassis serial number of chassis

    -hope this will be useful-

    There isn't any processor update for you that will be worth the effort. The one you have is 2 GHz and the T3400 2.16.

  • Compaq presario cq62-219wm cpu update

    We have a laptop, compaq presario cq62-219wm. Intel celeron 900 to 2.2 ghz (800 mhz). Windows 7-64 bit o/s. y at - it a cpu I can go to for this laptop? the celeron is a w/single core wire I think. I would switch to a dual-core (at least) if possible. How can I find a list of processors that can I update? the model number is WQ778UA #ABA. the serial number is *. any help would be appreciated.

    davidljtn44

    You can virtually none of the PENRYN 45nm lithography processors put in it, the optimal processor, you can upgrade is the Intel core 2 duo t9500. I have the same laptop and I have the next step down from what is the Intel core 2 duo processor t9300. There is no complete list of the processors that it will support the lists that you will find are incomplete at best even Intel does not update their information. Go to intel.com and search PENRYN in a search more people you can use, you need to compare to ensure that.

  • Compaq Presario C555NR Notebook CPU

    Hi all

    I have a laptop Compaq Presario C555NR. I think about upgrading the processor to something better. Right away

    It is a Celeron M 1.6 GHz clocked.

    This question, I asked Compaq and downright they told me that this laptop CPU cannot be upgraded. Until I give up,

    I would like to ask those of you who have this laptop, if you were able to upgrade the processor and what spend you

    TO? In addition, any idea that the best processor, it's that this laptop can support and instructions to upgrade?

    Thank you!

    I'm not quite as negative as infernoman but it is essentially correct. Portable versions of Celeron from HP computers generally have a different motherboard, and you cannot install a Core 2 Duo or Pentium because speedstepping function is not supported by the motherboard. Celeron not speedstep. You can install a faster Celeron, but why bother? It is not something for a novice to try to do. Just sell your laptop and buy a better one than you will always before an upgrade of the processor.

  • Compaq Presario CQ61: BSOD - memory management error

    Hello

    So, I have my other laptop, Compaq Presario CQ61. For like 5 or 6 months I had a lot of problems with it, like freezes, BSOD-s and not to forget that convenience store was down. I transferred all personal files on the external HARD disk and decided to reinstall Windows (7 - legal copy), hoping that the problem will be solved, but in vain. Finally, I installed Windows 8 Pro, because as said in the forums, people, it may be a problem with the installation disc. For like 4-5 days my HP laptop was running well, all the updates that are installed (haven't seen it lately), I just thought it was a miracle and my problem is solved. Today, he appeared. BSOD. After reinstall or to install both versions of Windows, I had, it is my belief that it is a hardware problem. I tried the memory management test and the result was something like "problems were found, contact your manufacturer. So my question is, is it a problem of RAM or a HARD drive? I've heard both versions, and if someone had in the past has the same symptoms as my laptop and he managed to cope, please enlighten me as well. Thanks in advance.

    Hi @Calin1 ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your Compaq Presario CQ61 and works very well, and then get the BSOD and stop. I recommend to restore the default BIOS settings if you can get it to go to the screen. You could restore the BIOS with this document by selecting the reload the default BIOS settings. No restoration. Restore default BIOS is necessary because I think that this will solve the BSOD.

    Here is a link to solve the BSOD if the restoration of the BIOS does not help.

    If this does not help at the end of the document it tells you to do a test equipment.

    The hardware test indicates if any parts are missing or have problems.

    I hope this helps.

    Thank you.

  • Compaq Presario CQ57 - 411TU CPU processor or graphics card update

    I was wondering if I could upgrade graphics card or my CPU processor. It seems that a lot of games I play on this shift of mobile as hell, so I was wondering if I could spend an of these. Thank you. FYI its games as COD hanging like hell and some games that need changed mipmap settings the graphics card cannot change a few pieces of the game is fuzzy (not to die of hunger).

    CPU: Intel Celeron B815 clocked at 1.6 GHz

    Graphics card: GPU Intel(r) HD

    There is not really a valid upgrade for you option. Has a Celeron processor models also have a motherboard which do no accept a Core (i3, i5, etc.), so you are stuck with maybe a little faster but still lame processor but nothing that will get you where you want to be. The video is a complete non-starter. There is no way in the world to do something with it. Your laptop is to make the work of the office and internet and your best bet is to sell and get something with a graphic power and treatment.

  • Compaq Presario CQ61-313US: laptop fan

    Hi, my laptop fan is not working properly, everything first, he constantly made a lot of noise, but could be reduced to silence with a soft bump, then, he kept just make noise at all, then, all of a sudden, it didn't work at all and kept the laptop overheating and stop, but when I reinstalled windows, it worked normally for a day , then only, he started making noises again. I know it's something in the software, is there a program that is the cause?

    According to the message that you have recently published, I want to confirm that this could be a hardware problem, we know never, so I highly recommend you Contact HP support by phone to get help to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

    You can also check your warranty here to check the status of the guarantee

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • Compaq Presario CQ62-219wm: CPU Upgrade - Presario CQ62-219WM

    I'm looking to upgrade the processor in this laptop as the base processor (the processor Intel Celeron 900 2.2GHz) is simply not enough for my needs.  I did my own research and I found (to be confirmed) this list of compatible processors purportedly in the service manual for my laptop. However, I have some questions and concerns.  Here are few of those who are supposed to be compatible with my specific system:

    Processor Intel Core i7 - 620 M (4 MB cache, 2.66 GHz, turbo SC up to 3.33 GHz frequency) 587259-001

    Processor Intel Core i5 - 540 M (3 m cache, 2.53 GHz, turbo up to 3.06 GHz SC) 594188-001

    Processor Intel Core i5 - 520 M (3 m cache, 2.4 GHz, turbo up to 2.93 GHz SC) 594187-001

    Processor Intel Core i5 - 430 M (3 m cache, 2.26 GHz, turbo up to 2.53 GHz SC) 597624-001

    Processor Intel Core i3 - 350 M (2.26 GHz, 3 m cache) 597623-001

    Processor Intel Core i3 - 330 M (2.13 GHz, 3 m cache) 597622-001

    Processor T4300 Intel Penryn (3 m cache, 2.1 GHz) (only for model 1.1) 572929-001

    Intel Penryn T3100 processor (3 m cache, 1.9 GHz) (only for model 1.1) 572925-001

    Processor T4400 Intel Penryn (3 m cache, 2.2 GHz) (for models 1.1 and 1.2 only) 584296-001

    Intel Penryn T3300 processor (3 m cache, 2.0 GHz) (for models 1.1 and 1.2 only) 592399-001

    Arrandale Pentium P6000 processor (3 m cache, 1.86 GHz) (for models 1.1 and 1.2 only) 613586-001

    Processor Pentium P6100 Arrandale (3 m cache, 2.0 GHz) (only for model 1.2) 613587-001

    Processor T4500 Intel Penryn (3 m cache, 2, 3 GHz) (only for model 1.1) 591880-001

    Processor Intel Core i5 - 450 M (3 m cache, 2.4 GHz, turbo up to 2.53 GHz SC) (for models 1.1 and 1.2
    only) 613585-001

    Processor Intel Core i3 - 370 M (3 m cache, 2.4 GHz, turbo up to 2.53 GHz SC) (for models 1.1 and 1.2
    only) 613584-001

    Processor Intel Core i5 - 560 M (3 m cache, 2, 66-3, 2 GHz, SC) (for version 1.2 turbo up to 2.53 GHz
    only) 625824-001

    Processor Intel Core i5 - 460 M (3 m cache, 2.53 GHz, turbo up to 2.53 GHz SC) (only for model 1.2) 626039-001

    Processor Intel Core i3 - 380 M (3 m cache, 2.53 GHz, turbo up to 2.53 GHz SC) (only for model 1.2) 625823-001

    Intel Pentium P6200 processor (3 m cache, 2.13) (only for model 1.2) 625831-001

    Intel Core processor i5 - 580 M (3 m cache, 2, 66-3, 33 GHz, SC) (for version 1.2 turbo up to 2.53 GHz
    only) 625825-001

    Intel Penryn T3500 processor (3 m cache, 2.1 GHz) (only for model 1.2)

    ______________________________________________________________________

    Apparently, all of the aforementioned processors are compatible with my system, but some are only compatible with some models (model i.e. 1.1 and 1.2).  How can I determine which model I have and what processor will give me the best output for my money?

    As always, any help would be greatly appreciated!

    It may "work", but as I said the GL40 simply has no circuits to take full advantage of the advanced features of the high range processors. Also no he don't mention not all i-series processors in the list. They are all Core 2 Duo T4200 except. Your Celeron 900 is one heart. Even a Pentium dual as say the T4200 will be much better and will be fully compatible with the GL40 chipset and very cheap to start.

  • Fan CPU in Compaq Presario SG3450IL failure

    Hello

    I use a Compaq SG3450IL with Windows-7(32-bit) OS desktop pc. You need the card mother ms-7525 v1.0 is installed in it. The question is that whenever I turnon or restart my pc it displays "error: CPU fan failure, shutdown of PC will immediately in a few seconds.» PC service immediately. ». But, when I open the Cabinet cpu one comes to know that all the fans inside the CPU properly. I use to press F2 and ignore this issue. But, after a few months, pc allows to recover for several times. I had formatted my OS together for this issue, but no use. I contacted the service of hp on this issue and they suggested me to change the cpu fan. I want to know if these two problems can be solved by replacing the cpu fan with a new one. Please guide me on this issue. I'm waiting for your valuable suggestion that there expert day.

    Concerning
    Rachid

    Hello

    normally, while the CPU fan error comes, it appears on the screen with a red font and pc stops immediately.

    However, if the system fan fails, pc gives message with white font and generally wllows to start Windows after you press the F2 or F1.

    If you are facing the second situation then a way to disable the message of would be - to go BIOS by pressing Ctrl + F10 when booting. Then go to advance the menu and then scroll down to hardware monitor. and you can now turn off the system from the BIOS fan control.

    I hope this will help.

  • Compaq Presario model SR5710F hangs / freezes when cpu cooling fan goes into high gear

    Compaq Presario SR5710F with CPU-AMD Athlon X 2 4450e dual core micro - after the Bureau served for a little while, I hear the cpu cooling fan switch into a higher gear. As soon as the fan changes speed, the PC crashes. Power/turn off is only an option to recover. A preliminary inspection did not reveal any significant accumulation of dust or debris around fan or cpu fan. Any suggestions?

    DTCothren,

    Well, I wanted to make sure that leave us nothing out. I think that it is the motherboard.

    Please answer as soon as possible.

    Thank you

  • The fan on a Compaq Presario CQ57 Windows laptop settings

    Hello, I have a Compaq Presario CQ57 and the fan runs all the time at full speed. I opened the laptop and did a fan and cleaning of the motherboard, I applied thermal paste, I changed in the bios the option #Fan always on # Enable to disable, I updated the Bios but still nothing... it sounds like a jet of fighter.should I change my fan? someone who has a Council?

    I already ordered the fan and I will keep you posted as soon as I get it and install it.
    Thank you very much

  • Disabling the cpu fan on HP p6210f

    I recently installed a Cooler Master Hyper 212 plus, which uses a power connector 4-pin CPU fan. The HP p6210f has a Pegatron M2N78 - THE motherboard, which has a 3 - pin CPU fan power connector. The fan turns on fine, but then stops and I get a message before Windows 7 Professional can load the CPU fan has failed and the computer turns off.

    Everything I've read suggests that the new fan does not spin fast enough for the taste of the motherboard and that, given that the fan works properly, I can safely disable the CPU fan error in the system BIOS. Yet, I don't see an option for this disable in the BIOS. How can I turn off the error on a HP p6210f CPU fan?

    RoJCor wrote... "I would still be able to access my full BIOS."

    What you have is the complete HP BIOS. HP and many other features of locking of the OEM in the BIOS to prevent users from accidentally and unintentionally change the settings which becomes a service call. The only way to restore the features which have been locked, is to ask a hack or modification of one of the sites that do this kind of thing. Don't forget that the desired function may not be in the BIOS first, the BIOS can be difficult to hack or modify, or that you end up with a virus or other.

  • Error Cpu fan failure cannot Acess Bios Compaq Presario SR1315CL Help!

    I wanted to upgrade the processor. I have 2 extra cpu a Sempron 2500 + and an Athlon 64 3200 +.

    I asked for advice on the card of another (wrong place, laptops), but got some good advice.

    I decided to try the Athlon 64. After having removed the radiator and the fan and replace the cpu,

    I get the ERROR: CPU Fan has failed! PC will turn off automatically in a few seconds.

    PC service immediately to avoid damage to the PC.

    I tried the Sempron, same thing.

    I made sure that all the connections are good. The fan turned by the way... Works very well.

    I studied the error and and found advice to enter the bios by pressing F1 and adjustment

    the bios with the default settings. I can't get into the bios. I pressed on, F1, Del, and F10. F2 will enable

    to continue to start. The processor is listed as unknown to the station.

    So how can I access the Bios? I kill the PC?

    N ° you should have cleared CMOS before installing the CPU. The voltage and FSB settings are different on the Athlon 64.

    Remove CMOS battery and set the clear CMOS in position 2-3 then press and hold the power button to @15 seconds or more.

    Reinstall the original CPU back in to check that all is well.

    If all is well then update your BIOS to the most recent available such that he would have supported for processors more. The link is to the latest BIOS for your motherboard from the PC.

    Clear CMOS again, and then reinstall the Athlon64

  • Compaq Presario CQ5110Y: Compatibility of CPU fan

    After doing a little research, I have another question regarding the change of my CPU fan.

    An article I read said that I need to check the compatibility of the new fan that I use as a replacement for my fan CPU 7 year and liked because he must blow at the same speed as the original fan; otherwise, the BIOS may not recognize the fan.

    How can I find out if the new fan specifications are the same as the old one? I already bought a 80 mm fan, but I don't know if it's the right to be placed on the radiator.

    Thank you.

    Thanks for asking this question.  The simple answer is a program called CPUIDHWMonitor.

Maybe you are looking for