HP Compaq dx2300 format microtour CPU Upgrade requires the bios update

Similar Questions

• HP Compaq dx2300 format microtour missing PCI Simple Communications Controller Driver (Modem?). WinXP

  Hello

  I had to restore a HP Compaq dx2300 format microtour Win XP system from the recovery partition.

  Everything seemed to work fine except no driver found for PCI Simple communication controller.

  There was no modem in Device Manager.

  I downloaded the driver for the modem on the HP website, but it will not identify / install the driver.

  Remains of the error. (no driver found for PCI Simple communication controller.)

  Any Suggestions?

  Thanks in advance.

  My apologies to Paul.

  Your label says HP Expert 2014. I made a mistaken assumption that you were part of HP.

  I agree that it probably isn't a standard part of HP. I also looked at their specs and the database driver.
  I tried to use never version on the HP web site for their standard model for Agere 56 K PCI Modem driver. He did not consider it as one appropriate driver.

  However, I could only identify a compatible driver using a new pilot identifier utility (new to me at least).

  It seems to work.

  I think I'll keep it in my toolbox in the future.

  http://www.driveridentifier.com/

  My apolgoies once again and thank you for your efforts.

• HP Compaq dx2300 format microtour

  I have a HP Compaq dx2300 microtour with the following BIOS:
  Phoenix Technologies, LTD MS7336 1.08, 25/05/2007

  I want to upgrade BIOS, but apparently there are no BIOS version unless
  you are running Windows 2000, XP and Vista.
  Since I have Windows 7 installed and working, can someone point me to an update of the BIOS
  It works on my computer?

  Thank you.

  Xlator1, welcome to the forum.

  The only way that you can update the BIOS is to return the computer to its original configuration. including the operating system.  I don't think that HP will be an update of the BIOS for Windows 7, if there is not a list currently.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP compaq 6510 b does not start after the BIOS update

  Hello

  When I turn on my laptop HP compaq 6510 b it DISPLAYS this message: your bios has not finished updating 6510b.after flashing the bios of the laptop does not start .it displays the same message (your bios did not complete the 6510 b update) and turns off. I cannot access the bios by pressing F10.the bios version was F16 and flash by F20 .will help thank you very much.

  I'll have to return a verdict of laptop motherboard bricked due to a failure of the BIOS upgrade. Sorry, but it happens.

  This means that this would require the replacement of the BIOS chip to make it work again.

• HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

  Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=support...

  I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?

  Thank you very much!

  Paul

  Hello:

  If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.

  http://www.eBay.com/ITM/PNY-nvidia-fx5200-Dual-VGA-DDR-256MB-video-card-PCI-/160704820819?PT=PCC_Video_TV_Cards&hash=item256ac0f653

  You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.

  Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.

  Paul

• I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  T

  I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  Thank you

  Yes.

  (137273)

• The Centro requires the DST update?

  The Centro requires the DST update?

  http://www.Palm.com/us/support/downloads/dst_palmos.html#downloadinstall

  Yes or no, the technical document would be better if he the Centro to mention specifically.

  Without this update is not necessary for the Centro.

  Message relates to: Centro (Sprint)

• Compaq dc5800 format microtour: Compaq dc5800 format microtour - 4 TB hard

  I bought a 4 TB harddrive and installed in a HP Compaq dc5800 microtour.

  The drive is recognized by the computer, but in the BIOS indicates that the capacity of the disk is just 1.8 to.

  I checked all BIOS storage options and doesn't see any clear way to solve this problem.

  Is it possible to do?

  Hello:

  If you use it as a main drive, it won't work because your PC lacks a UEFI BIOS.

  The maximum size of hard drive, you can install a HARD primary as 2 TB in your model drive.

  If you use it as a secondary disk (storage), you should be able to format in GPT to use all 4 to.

  Read this white paper from HP on TPG...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3658081&docid=emr_na-c02826744&docLocale=en_US

• HP DX2450 format microtour slow start on the POST screen.

  Hi all

  The product name and number: HP DX2450 format microtour

  Operating system: Windows 7 Pro 64-bit

  When I turn on the PC, it takes the computer about 20-30 seconds to access the menu of POST/HP screen.  After that, it starts in Windows 7 pretty quickly and is normal.

  Then, when I hit the power button the screen is black with "no signal" displayed for about 20-30 seconds, then upward appears HP POST screen and it starts fine.

  I tried everything under the Sun for this remove:

  1 pulled all the system RAM and started with inserted individual sticks.

  2 MemTest not ran - no error

  3 HDD Regenerator only ran - no error

  4. the disk check is ran - no error

  5 disabled floppy, USB, LAN boot, groups of CD-ROM, diskettes groups, internal speaker audio in the BIOS - do luck

  6 reset CMOS - cannot set date/time - no luck

  7 Ran HP Diagnostics to start - CPU, RAM and disk hard everything is OK

  8 Ran SMART test on hard drive - everything is OK

  9. disconnect all USB devices at startup - no luck

  10 reinstalled Win 7 on another hard drive plugged into PC - no luck.

  11 upgrade BIOS to the latest worm (5.63) - no luck.

  I'm out of ideas.  I'm starting to convince myself that works it's just the way the PC and its normal for it to take 20 to 30 seconds of kick.

  The only other thing I did is upgrade RAM to 4 GB, but memTest doesn't show any errors.

  Any ideas, guys?

  Kind regards

  Jonathan.

  Hi Danjen,

  I finally discovered what the problem was.  It was the dedicated AMD Radeon 5450 graphics card I have installed!

  I took the card and returned to the integrated graphics card and it starts instantly.

  I should have known, really.  I just forgot the graphics card.

  Thanks for your help.

• CS3 upgrade to CS6, upgrade requires the serial number CS5.

  I bought the CS6 of CS3 upgrade on the offer expiration date 12/31/12.  I got the upgrade box, and it says that I must have a valid serial number for the CS5 verision.  I can't install this upgrade?

  Check if you qualify for the upgrade of the program, regardless of cs3 you have: http://www.adobe.com/products/creativesuite/upgradeinfo.edu.html

• HP Compaq DC7700 CMT Desktop - latest version of the BIOS

  Hello

  (1) I know the latest version of BIOS for HP Compaq DC7700 Convertible Minitowers desktop PC?

  The current system of Information is given below:

  Name of the operating system: Microsoft Windows 7 Professional
  Version: 6.1.7600 Build 7600
  Model: HP Compaq dc7700 Convertible Minitowers
  System type: X 86-based PC
  Processor: Intel (r) Core (TM) 2 CPU 6400 2.13 GHz, 2133 Mhz, 2 Lossnay, 2 logical processors
  The version of the BIOS/Date: Hewlett-Packard 786E1 v01.10, 13/04/2007
  SMBIOS Version: 2.4
  Physical memory (RAM): 4.00 GB

  Kind regards

  SV

  Hello:

  When you download the BIOS file that is run, and the first thing that will pop up is a set of web page - and the instructions for all the BIOS flash methods.

  I like the easy way to format a USB drive in the file system FAT 32, copy the contents of the flash BACK to the usb flash drive folder, plug the flash drive on the PC, start PC, tapping on F10 key to access the BIOS at the beginning of the HP welcome screen and using the 'Flash ROM system' menu in the BIOS.

• Update satellite A200 - 14F CPU T7400/T7600 and BIOS update

  Hello

  I want to upgrade my current Core Duo T2450 CPU to something faster or T7400, T7600.

  I know that PM945 will manage it but what about the BIOS? I have 1.80 which is the last for my model.

  Where can I find that some BIOS change log to see if the newer processors are supported?

  Are you sure that you want to upgrade the processor?
  An upgrade of the CPU will not bring much more performance but mobile CPU's are fairly expensive and maybe they are not supported in the BIOS or motherboard.

  Moreover, Toshiba doesn't support a CPU Exchange. You can do this, but at your own risk.

  Normally a BIOS change log you can find on the driver of Toshiba download page, but if you can find t we Web does not exist on the site.
  But I'm pretty sure that Toshiba doesn't add new taken processors supported by a new BIOS because it s not supported.

• No sound in Satellite P105-S6024 - upgrade of the BIOS, Windows XP SP3

  I changed the BIOS - 20090304153829.zip BIOS and put the new processor T7400 and I don't have a present, I have Windows XP SP3.
  You are welcome to this question, it depends on my sound

  Help me.

  Hello

  According to http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm CPU upgrade is not supported, and what you have done is at your own risk.

  Anyway, is sound the only problem, you have now?
  What is with the Device Manager, have you tried to install the audio driver?
  Some unknown device appears there?
  Can test you the functionality of hardware using the recovery image?

• Re: Upgrade of the BIOS in a Toshiba Satellite L640

  Hi all, how is life. I have a Toshiba Satellite L640 with LUbuntu 12.10. My BIOS is v 1.70. I think I should update, because the latest version is 2.70 and he could solve some battery problems.

  The problem is that the bios upgrade software for the toshiba site is only for Windows. He is not yet back, in this case I could start from a USB Pendrive with FREEDos installed and do the upgrade.

  Then, someone knows some way? I read you try to run the upgrade through wine application is not recommended. Also, I guess that it is not advisable to pass by VMWare, but I don't know about it.

  Of course, I have no system to dual-boot, just Lubuntu Qantal.

  Thanks in advance

  You are right. Toshiba offers WIN version only, so it cannot be used with Linux or by using the external device as BACK up to date.

  What problems do you have with the battery?

• Satellite A65 - Crash during the upgrade of the BIOS. Not now boot.

  I have a satellite A65 s-1064, and I was upgrading the BIOS from windows. Suddenly, the computer turns off, and I thought that it meant that the update was made. I pressed the power button, and booted the laptop, but remained at a black screen. I thought maybe the BIOS was always something, so I left for a while. After an hour, I returned to find even on the black screen.

  I pressed the power button to restart, but nothing happened. I finally had to pull on the power cord and the battery. Once I did, I plugged it back in and put the battery in, but nothing happened. No battery charging lights. No power lights at all. Nothing happens when I press the power button. My question is, could do a BIOS upgrade failure, and could I somehow reflash the BIOS without power?

  Hi Brandon,.

  It is very unusual for an upgrade of the Windows BIOS cause this kind of problem. Normally, the power subsystem is quite independent of the BIOS.

  Is there a reset button that you can use to reset the system your A65? (Sorry, but I'm not familiar with the A65). If so try to press it to see if this will allow you to restore the power of your laptop.

  If you get no power at all (try removing the battery and then connect to the AC adapter), then it is possible that the power supply or the motherboard did not in this case, you will need to contact an approved Service Agent for the laptop repaired.

  As for your question about flashing the BIOS without power, I'm afraid that this is not possible. You will certainly seized the restoreds power to your laptop you can proceed with your upgrade of BIOS.

  HTH