Bij laatste W7 works AVIA tv kaart niet meer meeting W Media Center update

Similar Questions

• Remote control of my cell phone will not work after the upgrade to Windows Vista in Media Center window.

  I have a Toshiba Qosmio G35-AV600 originally shipped with Windows XP.  I did a clean install of Vista, which resulted in my remote no longer works.  It runs on my laptop. But the contoller stopped working in Media Center window.  And it does not turn off the computer.  So basically so that Vista runs the remote is useless.  I hope that someone a lot smarter than me can help you.  I looked on the forums of computer manufacturers and known issues advice with no luck. I have visited many sites looking for a solution.  Someone has an idea?  This problem is fixable?

  Check again - Device Manager this time select the option for "Show hidden devices'in view in the menu bar."

  It can show the unit.

  Other than that, you might be better off trying forums for Toshiba http://forums.computers.toshiba-europe.com/forums/index.jspa

• hij vind mijn mijn geluids kaart niet van drivers

  IK heb nu winows 7 er op Haag nu vind mijn geluids kaart niet meer hij

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Failed to read DivX AVI on Windows Media Center

  I recently set up Windows Media Center on my Vista Home Premium SP1 Dell inspiron 1720 to try to distribute multimedia content for my new Xbox 360 Elite.

  He agreed with success the extender of the Xbox, but on the Xbox video files and photo show as empty althouough, it can stream music from the laptop with no problems.

  When I returned to my dell, I saw that my AVI DivX files do not appear in the Media Center or locally, and no more my photos! The only items that he picks up are subfolders in the folders that I added. If I run a DivX AVI movie through a Windows Explorer shell, Media Center will play that music, as if missing the codec - even if Media Player 11.0.6001.7004 has no problem with the even if I close Media Center and then open the file again.

  SO why don't media library on Vista SP1 manage photos jpeg from Sony and Canon caeras, and why he can't play back AVI DivX in? Any help gratefully accepted! :)

  Thank you!
  Mike

  Chris I am playing my AVI videos by Media Center windows (using vista ultimate 32 bit) via my xbox 360, does not.  I have Xbox Live but Media Center is still telling me that it does not recognize the codec.  If my AVi files playback is possible-how?  Is - not more easy if I just update for windows media center in Windows 7?

  ==============================================
  If you haven't seen the article following... it may be worth a visit:

  FAQ: Using Xbox 360 as an Extender
  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/help/Extenders-Xbox-FAQ.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Na heropladen van WIN 7 kan ik mijn DreamweaverMX 2004 niet meer activeren - mijn license is vervallen zogezegd?

  Na heropladen van WIN 7 kan ik mijn DreamweaverMX 2004 niet meer activeren - mijn license is zogezegd vervallen? IK says use programma sedert 2004, ken het goed om een site bij you houden. Ben 79 en niet meer van plan om nog een nieuw aan progamma you leren.

  Impossible to activate | Macromedia products - http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html

• Windows Media Center has stopped working

  I get a message saying windows media center has stopped working, I also have one indicating Manager windows media center has stopped working, I think that there is also a manager of STF Windows as well. It's just so a new computer should have no probs. There is also something strange happens with my internet connection. I have all the bars of signal strength, but keep dropping out. Telstra have been of no help!

  I tried the SCF/scannow but I received a message "windows resource protection cannot perform the requested operation" achieved 63% then stopped.
  It was moved by John of microsoft, but the place where? still no answers.

  Hello Emma Howard.

  Thank you for your message.  Please follow the steps below to see if re-register components of the media centre will help to resolve the problem.
  Click on the 'Start' button > in the search box, type "Command" > right click on command prompt and select "run as Administrator".
  Once the prompt command opened in a high State, type the following shots entered after each line.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  Please let us know if it did or did not help to solve the problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I changed my antenna to Time Warner Cable and Media Center has stopped working

  I have Windows Vista Home Premiun

  Multimedia card Hauppauge 1250

  I know that the card does not work because I hace Hauppauge WinTV and it works fine

  I can not configure Windows Media Center (Windows Medis Center has stopped working)

  I support this recommendation.
  The drivers for your tuner can be found here:
  http://www.Hauppauge.com/site/support/support_hvr1250.html
  On this page, click on the tab "Install Windows Media Center" and download the driver MC package (it is not the same thing as the 'regular' drivers in the (first) tab by default.)

  Oh, and: I also recommend uninstalling WinTV.  After you have installed can kill access to the Media Center to the tuner.

  HTH,
  Chris

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• Windows Media Center online media NOT WORKING Please HELP!

  I like to use Windows Media Center online media, but it has stopped working.  When I click on a video of MSNBC all this is idle as if his will load but the video never starts.  In January I had to install a new anti-virus program. Could he be playing with my media center?  Also would it be my wireless connection? I live in a dorm, and everyone here has said that the connection was slow.  HELP Please!

  Hi liis177,

  Follow the instructions in the link below that may help you resolve the issue:

  Windows Media Center stops responding when you open an online service in Windows Media Center on a Windows Vista-based computer
  http://support.Microsoft.com/kb/954588

  Check whether the problem is resolved.

  This problem may occur if Windows Media Center update process (Mcupdate.exe) cannot access the data store, or if it is damaged. Try to rebuild the Media Center data store that could help you solve the issue. To do this, follow these steps:

  1. Click Start, type run in the start search box, then click on run in the list programs.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
  3. in the details pane, right-click right mediacenterdatastore.db and then click Rename.
  4 rename the file in mediacenterdatastore.old
  5. run the file, %systemdrive%\Windows\eHome/mcUpdate.exe
  6 start Windows Media Center.
  Check whether the problem is resolved.

  If this does not work, try to update the latest service pack that might help you resolve the issue.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Windows mediaplayer works niet meer bij windows 7

  Windows mediaplayer works niet meer bij windows 7

  Look in the upper right of this window.

  

  Where we see English, click on it and select your language from the list.

  

• Na flash van 06/12/2012 updated flashplayer niet meer in firefox, iemand een Holland works?

  Na works van 06/12/2012 of flash update of flash player niet meer in firefox, bij het merk said dat een veel voorkomend clean ik googlen is vandaag, maar nog geen Holland France. Kan iemand mij helpen?

  Try this:

  • https://support.Mozilla.org/KB/keep-Flash-up-to-date-and-troubleshoot-problems
  • http://forums.Adobe.com/thread/1018071?TSTART=0

• Adobe indesign cc 2015 works niet meer

  Sinds vandaag kan ik Adobe InDesgin niet meer opstarten ik deze merger squeeze:

  Adobe indesign cc 2015 works niet meer.

  ER is een clean opgetreden Kon het programma niet goed works.

  H and programma wordt er en er wordt een fusion: als een solution available that is

  IK las dat ik mijn grafische kaart zou al like. Dan zou hij wel like openen.

  IK heb said Molfetta maar ik blijf nog steeds including merging will

  Idea of enig iemand hoe ik has said clean zou Hotel oplossen?

  OK, rename the two folders of InDesign that you found in the AppData sections and restart. If ID still does not start, make sure that the new folders have been created not (remove them if they were) then copy the two files again account and paste them into the original.

• iPad 2 link works niet meer in Safari update na 9.3. Wie has Holland?

  iPad 2 link works niet meer in Safari update na 9.3. Wie has Holland?

  The Update 9.3 has been removed - you may want to wait until it is released as

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• controldeck works niet meer

  ALS ik op controldeck klik ik foutmelding dat het niet meer works treat.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Select uw taal ITU keuzelijst om your question above you plaatsen in Taal van uw keuze. Post on the forum without jij het is alleen in het Engels. Als u niet vinden baking taal, support van jullie voor aanvullende van boven international Geraardsbergen Hotel worden door het volgen van steeds link service:

  http://support.Microsoft.com/common/international.aspx

  Dank u.

• Although kan ik niet meer inloggen bij Messenger?

  IK kan niet meer inloggen bij messenger via een foutcode

  This forum is English only. For the forum of Messenger, please click the link Hotmail, Messenger, and Skydrive in the banner at the top of this forum page.

  Said forum is certainly Engels. Voor het forum van Messenger you will please Hotmail, Messenger & Skydrive in banner bovenkant van deze forumpagina bij.