upgrade to 8.1 fails 3 times to 83% 0xC1900101 0x2000A errors

Similar Questions

• Update of Photoshop CC 2015: I'm trying to upgrade to CC 2015.1.on my IMac, but I can't update it fails every time error: U44M1P7

  I try to update my IMac CC 2015.1.on but, I can't update it fails every time? Not on Mac Book Pro! I left creative cloud, open creative, disconect and re connect to the creative cloud but it's the same thing on I mac 10.10.5 version (error: U44M1P7) tanks

  In this case I would ask you to Contact Customer Services such as technical troubleshooting may be required.

• Pavilion g4-1117DX: fail to complete the restore of HP. Error mess - 'Error of CTO Flg' + ' [205] UIA writing failed 3 times!

  After failing to recover my system from hard on the D-disk partition recovery software, I bought HP Recovery disks from HP support turned on the PC and installed the first disk according to the instructions. I also pressed ESC on powerup and then selected F9 to boot from the DVD. After 5 minutes of access to records of HP recovery in the DVD player, an error message led indicating that "HP restore incomplete". I looked at the details of the error and showed an other error message stating "[205] UIA writing failed 3 times! In any case I try to do the PC recover either by the recovery using the HP Recovery Manager Software Manager & recovery on the drive partition hard D or using the HP Recovery DVD s I get two ways the same 'error CTO flg' + ' [205] UIA writing failed 3 times. Anything else that can be done, please?

  Thanks for the reply. Since I posted my problem on this Forum description, I worked directly with the HP Support and finally concluded that I have needed to push the F9 key button immediately that the PC has been poweringup. Do this correctly then leave the HP recovery disks provided (I bought them from HP) be read by the system and recovery properly executed.

  But it shows there is some question buggy with the test drive HP I ran several times and each time has shown an error message of hard drive with result [305] and also [303] - that led me to that almost an expensive for a 320 GB hard drive HP replacement purchase.

  Fortunately HP support people were so full with me and kep remember to follow-up with me to see how I was doing and then I got my laptop HP back from work. otherwise I would have made a mistake and installed the third disk, driver HP disk - and his great work now faster than ever.

  Thanks Hewlett Packard.

  Actually, I was aware of this type of support for HP since the 1970s, when I buy and install servers HP A2100, then servers HP 1000 HP 9000 server, and I have met and had presentations from the team of engineering and management in California from HP this for me and my boss the next type of systems that HP grew for the future and then the HP - DEC ALpha - all this for machinea the best range of computers with the best support for ground control systems (GE Americom in time) operating a critical General Electric fly over most of the commercial SATCOM satellites in the United States.  Even if I quit this job just now, HIS AMericom always uses HP to fly to the top of 20 + satellites over the United States and around the world.

  Shows just why HP is the longer computer company and will continue to be!

  My support case number was 3013351909 so that whoever the Lady of HP support could get credit for its excellence and how she persisted on its initiative of checkin continuously with me and guide me and helped to stop me from buying a disk hard when I didn't need to.

  Thanks HP and what concerns the life long realtionship with me!

• Three Windows Vista security updates continue to fail every time.

  Three Vista updates fail every time Windows Update tries to install.  They seem to settle in Windows Update and then require a reboot to complete.  During the restart of the system required, "Configuring updates 3/3 ' always shows 0% complete then finally said the ' configuration updates are not correctly installed and updates to return back and restart the system, then ends."

  These are the updates:

  Update security for WIndows Vista (KB2691442)

  Update security for WIndows Vista (KB2655992)

  A security update cumulative for Internet Explorer 9 for WIndows Vista (KB2719177)

  I tried several times with the same negative result of "failing".

  I got a Windows Defender Update yesterday and only one installed perfectly, but they are still pending.

  Suggestions?

  Thank you!

  The link below has options to solve your problem of loop.

  >>

  UTC/GMT is 19:41 Saturday, August 4, 2012

• Recovery system keeps failing (5th time trying)

  Hi, I decided to restore my laptop because he had a lot of junk on it, and there were also a few errors while I tried to download other software such as iTunes or the installation of my printer. I can't restore my laptop, however. My laptop is a Toshiba Satellite L300 series 64 x Vista and every time I insert my restore disk in my laptop and hold the C button, a screen appears saying which option I would choose after. I chose the option "Restore to unpacking", and it does not work. He makes me wait 40 minutes and then gives me an error: Error 10-FA12-045D. So I tried again and this time, I clicked on wipe hard drive. This does not work too, and he told me it was done course of recovery. Then he tells me to click 'OK' to restart the computer. I click OK, and then it loads to a page that says start Windows in safe mode, corrections out of fashion, etc. I click on safe mode, it loads after 15 minutes, and then there is a message saying that Windows cannot install something on safe mode. So I restart the laptop again, wait still 15 minutes and then run my laptop normally. Now Windows downloads a "sysprep" device, but then it fails to download and gives me an error. Here is the error:

  "C:\Windows\SysWOW64\sysprep\WBDEN44I. DLL is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of the software for your support. »

  How can I fix it? Please, Microsoft, I don't know who else to turn to...

  Hello

  As you are not able to retrieve using the disk recovery thus, it is best to contact the system manufacturer for assistance.
  It looks like a hardware problem.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SDK software update a few IDE - fails - every time

  When you try to update the SDK of the IDE from the inside, all files seem to get, but immediately after unpacking/installation starts (after about 22% of the process)-it fails - every time - saying:

  Updated SDK has encountered a problem"... and the show of"details ":

  There was an error in updating software development kit. Press the Details button to review the error.
  Operation operation to install SDK failed: an error occurred during the installation elements
  An error occurred during the installation elements
  session context has beenprofile = DefaultProfile, phase is org.eclipse.equinox.internal.p2.engine.phases.Install, operand = null--> [R] bb10_0_09_native_sdk_684.10.0.10.684.group 1.0.0 action = com.qnx.tools.ide.sdk.manager.core.actions.SdkManagerPostInstallAction).
  Can not save the xml qconfig file.
  An error occurred during the installation elements
  session context has beenprofile = DefaultProfile, phase is org.eclipse.equinox.internal.p2.engine.phases.Install, operand = null--> [R] bb10_0_09_native_sdk_684.10.0.10.684.group 1.0.0 action = com.qnx.tools.ide.sdk.manager.core.actions.SdkManagerPostInstallAction).
  Can not save the xml qconfig file.

  All our 8 x 64 Windows installations gives the same error.

  and local users have all the rights administrator - BBNDK installed on the non-system drive

  Any ideas what's wrong?

  I don't know too much about this, but looking at the QNX_CONFIGURATION in the BBNDK-ENV. BEATS you posted here, it seems that may have installed the SDK as a Windows user "bb10.

  So try checking if user "bb10" exists and has access to the folder where qconfig.xml is supposed to be saved.

  Otherwise, you can try the manual process described here: http://supportforums.blackberry.com/t5/Cascades-Development/Cascades-SDK-update-fails-An-error-occur...

• I want to stop windows automatic download of files upgrade. It eats my internet time and money

  I want to stop windows automatic download of files upgrade. It eats my internet time and money. It serves much purpose in home edition when working on simple office work. According to me, that it is only required when the server is used and a lot of office are carried out. Help, please

  Click Start / Control Panel / Windows Updates / corn on the left, click on 'change settings '. In the drop-down list, select never "Find updates".

  This will stop the automatic download and installation of updates, but still allow you to manually run Windows Update.

  J W Stuart: http://www.pagestart.com

• Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there an access

  Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there access to the 4.1 just uninstall and fresh install 4.4 from the site?  Is the problem 4.1 and 4.4 no longer supported?

  You can download LR 4.4.1 including the latest update here:

  https://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Uninstall the current version of LR, you have it installed, download LR 4.4.1 installer and install it. I don't know what causes your problem with the update, but that a full installer for 4.4.1 can operate without any problems.

• What to do if the Photoshop Lightroom update fails several times? I use windows. update of creative works cloud, but Photoshop doesn't.

  Several times on a line, I want to update Photoshop CC and it fails every time. I get the message that he had failed. Update creative cloud and Lightroom CC works well. Only does'nt of Photoshop.

  Welcome,

  Danielle Nys

  Try direct updates

  CC updates to 2015:
  http://prodesigntools.com/Adobe-CC-2015-updates-links-Windows.html
  http://prodesigntools.com/Adobe-CC-2015-updates-links-Mac.html

• I can not download an update for Photoshop CC. The update of Lightroom downloads Ok but the Photoshop one fails each time

  I can not download an update for Photoshop CC. The update of Lightroom downloads Ok but the Photoshop one fails each time

  Despite several reties and reboot y computer rem issue, NSAID

  I use a MAC with OS X 10.10.5

  or update by downloading the files directly and then to apply them.  Here are the updates of windows, but the mac updates are also prodesigntools.com

  CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

  updates CC 2015: http://prodesigntools.com/adobe-cc-2015-updates-links-windows.html

• Adding RAM on S6300NX, keeps restarting. Windows XP SP3 Upgrade Utility driver update fails

  I have a Compaq Presario S6300NX works on XP Home and has the AMD Athlon XP processor.  The vehicle currently has a 512 MB PC2700 DDR SDRAM Memory Module installed.  I bought a 512 MB 333 MHZ DDR PC2700 184 pin Dimm 2.5V module install alongside the original.  I did my best to check that it is compatible through the HP site but it was purchased by an outside vendor.

  The new module fits perfectly into its housing.  However when I turn the computer back on, it will just through this continuous reboot.  He could do it on the desk, but within seconds, it restarts.  Once, I got a message saying 'ended unexpectedly DCOM Server process Launcher service '.  I took the new module back out and rebooted - the computer then worked fine.  He told me that the system has recovered from a fatal (x 4) error.  But work just fine without the memory upgrade module.  Tried to reinstall, maybe user error (?), but once again, the system went into a continuous reboot cycle.

  I googled the message an error I copied (on the DCOM model) and found here in the support area and HP drivers, there was an updated driver that I could do that specifically mentioned my error message "Microsoft Windows® XP SP3 upgrade utility for systems equipped with AMD processors.  I followed the instructions and downloaded the file to my desktop.  I then tried to launch the installation of many times each time to get the same error message after extraction of the files and the yes button to install.  "Your system does not meet the minimum requirements for this update.  The update was cancelled (9998)"

  These are the prereqs in the instructions: "you must be logged in as an administrator to install this update.

  I went to Best Buy and bought a new module of memory.  Accompanies the PNY optima.  Worked perfectly.  After all that.  So I guess that it was probably a bad memory stick.  Thanks to all who helped!  Problem solved!

• I am trying to download acrobat pro dc creative use of clouds packer. It fails every time. It seems like PAC and do the package, but then when I try to install (acrobat pro dc) nothing happens. Installation starts but there is no dc pro acrobat installs

  I am trying to download acrobat pro dc creative use of clouds packer. It fails every time. It seems like PAC and do the package, but then when I try to install (acrobat pro dc) nothing happens. Installation starts but there no acrobat pro CD is installed.

  Hi Pavle,

  The installer for Acrobat is different from the rest Cloud Creative applications that is why when you create a package by using Creative Cloud Packager, there are two folders created:-

  (1) build-->> all upward for all Applications of Cloud Creative except Acrobat.

  (2) exceptions-->> Contains for Acrobat and the Muse.

  You will need to install Acrobat first through the Exceptions folder. Select the option to install as a trial or a subscription.

  Then install the creative rest of Cloud applications through generation file, it will install the applications and your copy of Acrobat license also.

  I hope this helps!

  Thank you

  Tanvi

• I try to install Photoshop for a free trial and it fails every time. I installed creative cloud with no problems. Help?

  I try to install Photoshop for a free trial and it fails every time. I installed creative cloud with no problems. Help?

  What is the error message?

  If there is none and the problem occurs during the installation, errors in the Installation and launch journal | CS5.5, CS5, CS6, CC

• Installation of creative cloud on Mac fails every time. Fine downloads, install resignations after 3/4 full.

  Installation of creative cloud on Mac fails every time. Fine downloads, install resignations after 3/4 full.

  Downloaded cloud creative I got a reminder to downloads, fine, click on install, gets near the end of the installation and then the box disappears and nothing happens. I have a message in the corner of my Mac asking me to re-download creative cloud. No matter how many times I download and try to install it, it never works.

  

  

  Please follow the steps in the link below: L

  Of nowhere, cloud Creative works not

  For that matter, the very very important steps he trash Adobe Creative Cloud and Adobe Application Manager of public services.

  File damaged Adobe Application Manager or Adobe Creative Cloud will conflict installation, make sure those trashy and run the cleanup tool and remove Adobe Application Manager, and then try to install the creative cloud, it should work.

• Billing has failed three times, account cancelled

  I had a problem with my CC that took a week to resolve, in this time the automatic billing has failed three times and I got e-mail telling me that my account was automatically cancelled.

  The problem has been resolved and I cound't find how to reactivate my account, so I ordered again.

  Now I have plans in my account, the old, where billing is supposed to be the 20th and the new, the 1st of each month. The thing is, when I click on the option my account, both open the same window, with the date of the new plan.

  Will I be charged twice for the same account? Or even have problems with the cancellation of the old regime?

  Hi vfv,.

  Welcome to the Adobe Forums!

  I checked your account, and I can confirm, you won't double charge.

  The first subscription has been cancelled and you will not be charged for this subscription.

  Please let us know if you have any questions.

  Thank you.

  Arnaud.