bin file recovery

Similar Questions

• After the deletion of the Recycle bin file recovery

  If you accidentally deleted the trash files, you can recover?

  If it was recent, this can work.

  Recuva
  http://www.Piriform.com/Recuva

• Recovery of WAP54G - must .bin file in sync - or a .trx SEU command line method.

  Any chance that someone has an answer to this?

  I saw the same question and but never answered.

  I can't find all the "brick recovery methods require .bin files but not the .trx file.»

  What a great job if I get something like dd - wrt...

  However, in order to restore to a linksys firmware using a tftp Send WAP, I need the .bin file to sync I well... which seem to no longer exists.

  Quick, I found some old links that gave details on how to get it back (old linksys links) but the ftp server that hosted these files no longer exists.

  Any suggestions on where to find the .bin files or a recovery method using the new trx files?

  use the web interface, or replace the device is simply a lousy option.

  /Shrug everything ive tried does not work.  (including a version 1.0 and version 3.1) Yes 2 different routers.

  If it uses the bin files I can recover very well... including the warranty voind jtag method.

  Simply not an image provide Linksys (cisco), the TRX files.

  the Open source versions work fine...

  While WAP is not dead.   I can't use an official /shrug 'image '.

  What im reading there is a very very small differences in the .trx .bin files from...

  Think im stuck using dd - wrt for now.

  BAH - after a final test... rename the .trx file .bin for sync... Flash as usual.

  wait 3-5 minutes

  and then

  the IP address for the wireless est.245.1 not as I used too... the old version is still bounced a.1...

  So yes the .trx will work...

  /headsmack

  Thanks for the doublecheck... even when a person behaves like an A$ $

• Pavilion g6: I deleted files recovery on D drive

  I have a HP Pavilion with Windows installed 8.1 g6. I accidentally deleted my files recovery on D drive. How can I restore them. I have Windows 8 recovery disks.

  It is unlikely. You can try the Recycle Bin of Windows, but it is unclear if it will work.

  I could try removing just to see if it works on my HP spectrum 13 XT ultrabook product loan.

  Edit:

  Ok. I tried today. I have found that if you want to delete the file, it would require administrator privileges. A specific and very important file is too large for the tank and asked me if I was sure I want to delete it again.

  

  

  Recovery of files that are located in the partition cannot be retrieved from the trash.

  You need to perform a factory image recovery if you want to have a labour recovery partition.

• ORA-19809: limit exceeded for file recovery

  Hello

  Following maintenance on our server (battery replacement raid + restart) my database (Oracle 11 g) is no longer available. I m a newbie in Oracle and I've been through the forum and I can t find the solution to my pb, I can fix the error ORA-19809 t since I can t connect to the DB as sysdba, everything I found the solution needs to be connected in sysdba. Please help I have struggled on this for days and I seem to go in the circle at the moment. Here's what I have:

  C:\ > set oracle_sid = APPLICATION

  C:\ > sqlplus/nolog

  SQL > connect / as sysdba

  ERROR ORA-12560: TNS:protocol adapter error

  
  

  Here are the mistakes I have in my c:/oracle/diag/rdbms/mytikka/mytikka/trace/alert_mytikka.log:

  Errors in the c:\oracle\diag\rdbms\mytikka\mytikka\trace\mytikka_arc1_6420.trc file:

  ORA-19809: limit exceeded for file recovery

  ORA-19804: cannot recover 30839808 bytes of limit 10485760000 disk space

  Arc1: 19809 error creating archive log file to ' C:\ORACLE\FLASH_RECOVERY_AREA\MYTIKKA\ARCHIVELOG\2015_03_31\O1_MF_1_88141_%U_. ARC'

  Errors in the c:\oracle\diag\rdbms\mytikka\mytikka\trace\mytikka_ora_7524.trc file:

  ORA-19815: WARNING: 10485760000 bytes db_recovery_file_dest_size is 99.86% used and 14655488 remaining bytes available.

  ************************************************************************

  You have choice to free up space in the recovery area:

  1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

  then consider changing POLICY of DELETE ARCHIVELOG RMAN.

  2 back up files on a tertiary device such as a tape with RMAN

  SAFEGUARDING RECOVERY AREA command.

  3. Add space drive and increase the db_recovery_file_dest_size setting to

  reflect the new space.

  4 remove the unnecessary files using the RMAN DELETE command. If a service

  the system control has been used to remove the files, and then use the RMAN DUPLICATION and

  Commands DELETE has EXPIRED.

  ************************************************************************

  Errors in the c:\oracle\diag\rdbms\mytikka\mytikka\trace\mytikka_ora_7524.trc file:

  ORA-19809: limit exceeded for file recovery

  ORA-19804: cannot recover 30839808 bytes of limit 10485760000 disk space

  ARCH: 19809 error creating archive log file to ' C:\ORACLE\FLASH_RECOVERY_AREA\MYTIKKA\ARCHIVELOG\2015_03_31\O1_MF_1_88141_%U_. ARC'

  Errors in the c:\oracle\diag\rdbms\mytikka\mytikka\trace\mytikka_ora_7524.trc file:

  ORA-16038: log 1 # 88141 sequence can be archived

  ORA-19809: limit exceeded for file recovery

  ORA-00312: thread 1 1 online journal: ' C:\ORACLE\ORADATA\MYTIKKA\REDO01. JOURNAL"

  USER (ospid: 7524): put an end to litigation because of the error 16038

  Kill Mar 31 16:08:06 2015

  ARC3 started with pid = 23, OS id = 8104

  Instance of stopped by USER, pid = 7524

  TNSPING seems to work
  

  C:\ > tnsping application
  

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 01-APR-2

  015 02:32:14

  Copyright (c) 1997, 2010, Oracle.  All rights reserved.

  Use settings files:

  C:\oracle\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 420025-w

  EB1) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = application)

  ))

  OK (0 msec)

  C:\ > lsnrctl status

  
  

  LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production April 1, 2015 02:35 :21

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 420025-web1)(PORT=1521))

  )

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  TNSLSNR for Windows 64-bit version: Version 11.2.0.1.0 - Prod

  ction

  Start date March 31, 2015 16:08:17

  Uptime 0 days 10 h 27 min 4 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File C:\oracle\product\11.2.0\dbhome_1\network\admin\listen

  ER.ora

  Listener c:\oracle\diag\tnslsnr\420025-web1\listener\alert\log log file.

  XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = 420025-web1)(PORT=1521)))

  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))

  The listener supports no services

  The command completed successfully

  Here are my tnsnames.ora:

  tnsnames.ora # Network Configuration file: C:\oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  APPLICATION =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 420025-web1)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = application)

  )

  )

  TSAPIDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 420025-web1)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = application)

  )

  )

  It can be a lot of problems (or pb)

  the server hosts multiple instances?

  of the right services.msc on that OracleService, properties and see what oracle_home it runs

  c:\oracle\product\... or that each path, it can

  computer management, make sure that the user logged in to the server, is also in the ora_dba group

  computer management / configuration / local users and groups / groups

  then from the cmd prompt:

  set oracle_home = whatever_path_you_found

  set path=%oracle_home%\bin;%path%

  Set oracle_sid = APPLICATION

  sqlplus / as sysdba

  REM > if you know the password for sys, try also

  sqlplus sys/password as sysdba

  check the value NTS sqlnet.ora

  http://docs.Oracle.com/CD/B28359_01/network.111/b28317/SQLNET.htm#NETRF198

  etc... etc

  Googling for ora-12514

• How can I replace the mime types of server, always get the mp3, rar, sid, bin files directly in the dialog box "where do you want to save this file?"

  I used to be able to click on MP3 files, the way back when, and Firefox asks where I wanted to save. Nowadays, it opens a new tab with a flash drive.
  By clicking on the "unknown" files, like .sid, .prg, .zip, .rar is ' this is a BIN file. [Cancel] [Save] ». It does not give me a check box for "always do this".
  I would like that option to edit so that certain types of files, such as PDF, regardless of mimetype, always get opened in a new tab if you click. Also some types of files, based on the extension, always go directly to the dialog box "Where you want to save the file?", without worrying if there is a viewer or a builtin player or not. In my Firefox (41.0.1 14.04LTS 32-bit Ubuntu) I have never the choice "do this for these files always" more.
  Googling led me to delete my file mimeTypes.rdf and since file extensions can even "well known", such as .zip, are treated as BIN files and I get the box Cancel-or-Save for those too - again without the choice of "always save the BIN files.

  These files are send as Content-Type: application/octet-stream and Content-Disposition: attachment;
  To send files in this way, you cannot save an automatic action.
  You can see that in network monitor.

  • https://developer.Mozilla.org/Tools/Network_Monitor

  Content-Disposition: attachment; filename="TURRICAN_AMIGA_PORT.sid";
  Content-Type: application/octet-stream
  

• FF reads JPG files without. JPG ext as BIN files

  Hello
  Why the IMG in the http://oiswww.eumetsat.org/IPPS/html/MSG/RGB/AIRMASS/FULLRESOLUTION/index.htm and other satellite service are read as BIN files? Is - Why FF compels me to SAVE their rather than show them (after application of picture) just like the Opera browser? Good God! MDE is jpg, then they must be binary. But the msg window informs me that "I chose to open a... file which is a BIN file...". "etc. I send the letter similar to FF Feedback a year without tangible result. Is there a setting 'secret' to change the behavior?
  Concerning

  Thank you very much, it works.

• Re: I need file recovery for Satellite C660-2FF

  I need file Recovery HDD how obtained

  Post edited by: Rozeno

  All you can do is drive recovery of the new order.

  You can do it on https://backupmedia.toshiba.eu/landing.aspx

• File recovery HARD drive missing

  I downloaded Win8 and installed, thinking that I would be able to run both I expected to install on drive d (Yes). It was late to do anything about it either once it all started, but he wiped the drive C. I decided to return to the factory settings.

  This is what is happening.

  After pressing F8, everything is OK up to choose recovery tool.

  No "HDD RECOVERY BUTTON_ _TOSHIBA." Is displayed at the bottom.

  Recovery disc and this is the message I received.

  "System restore failed.

  File recovery HARD drive on the second disc of the first hard drive not found.

  There is no valid disk HARD recovery environment on this computer. »

  I ran a program of partition and the result is that I have a partition 400meg on the front of the C drive and all files are intact.

  Can you help me?

  Hello

  Saved on the HARD drive recovery image can be used if the laptop has only factory settings. After installing Win8 you have changed everything and factory settings have been deleted. If use of F8 are unable to work.

  This 400MB you see have nothing to do with the Toshiba recovery image. This small partition is owned by the operating system.

  One thing confuses me in the history. It is the use of recovery disks.
  You have created recovery discs using the preinstalled Toshiba recovery disc creator?

  Generally the recovery disk contains all the important data for the installation of the OS, so I put t understand how you can get this message.

• Unarchiver and StuffIt do not open the bin file

  I have the OS x 10.9.5 and installed Unarchiver or Stuffit to open bin files and they do not work. Can help you him?

  Thank you

  IRIS

  the .bin files are executable. There is nothing to check them.

• I have the virus of file recovery, now I have a black screen with cursor blinking in the upper left corner.

  I have a Pavilion Notebook and recently caught the virus from file recovery.  I bought and ran the disc of Trend Micro Titanium Maximum Security.  Now, I get a black screen with a flashing cursor in the upper left corner of the screen.  All tests ran for memory, hard disk, etc. are OK.  Now I have a recovery disk, but have not backed up my files.  Any suggestions?

  Download your backed up files, then you can boot from your recovery disks to reinstall Windows.Several options to do so.

  Remove the hard drive and attach it to one > USB adapter . Plug it into another computer via usb port and copy files off the power.

  You can use > Ubuntu Live CD to boot from and backup files.

  OR ->Kaspersky CD has the ability to back up files.

• Try to install the driver, get error "no program associated to open. BIN file"XP

  Trying to download and install a driver and a version update system for my Zoom H4n recorder, I get an error message that says something like "no program associated to open. BIN files. How can I fix this so I can manage my music. Thank you!

  This is how you do it .

• a program has taken over my .bin files. How can I restore them

  a program (VLC media player) took over my .bin files, to be able to open them only with her, how to restore the .bin files to open the original windows program

  Hi rowdydave,

  Try these steps and check the result.
  Step 1: Associate a program
  see How to change or choose the program that starts when you double-click a file in Windows XP .
  b. try the steps in the article and check the result.

  Step 2: If the problem persists, uninstall VLC media player
  see How to change or remove a program in Windows XP .
  b. Once you have deleted the program, restart the computer and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• file associations for .bin files

  It seems that the *.bin files have been associated with a video player program. How do I tell - associate these files and how the *.bin files are used by windows and other programs?

  There is no standard definition for the *.bin files and no program specific to open. Boulder computer Maven
  Most Microsoft Valuable Professional

• Looking for a Firmware bin file?

  I was installing rockbox, and asked that the original file, firmware or something, like a bin file? Where can I find it?

  As I said, it's a different material. The downgrade would only take the courage of your v2 and replace them with the innards of a v1.

  I don't know Rockbox is working on it among their many other projects - which they are out of the goodness of their heart, geek, with little or no help from SanDisk, so you'll need to be patient.

  You can see how they're going to www.rockbox.org.