# binary bit test

Hello

I need to test every binary bits using the following logical equation.

How can I do this?

((var & (1

For example

If var = 0111 and bits = 2 (starting at 0), so third bit of the var is 1 and shift by two

are equal, this equation will produce TRUE for third bit.

I need things to do

1. I need to compare each binary bit

2. the result should be in binary bit programming.

Can someone show me how?

Do

In the digital > pallet of data manipulation, ist here it logic shift function to move a little.  You can also do a Boolean logic on the integers.

Tags: NI Software

### Similar Questions

• operation binary bit

Hello

I met a problem with 9 digits in binary bit operation.

Long ago, I handled some binary and remind that the first digit could be considered significant or other meaning see.

Although I suppose the solution as the attachment, I want to know the proper technique in the binary operation.

(1) how can I replace the loop FOR with a simple bit operator?

(2) I am using U16 (16 bit) to adopt all of the nine figures but how to remove the first digit or some numbers in order as a final data? (In my code, I just subtract a number between the calculated number.)

for example, (1) 101000111-> 101000111 or (11)-> 01000111 01000111

(3) in the other curious question, three lower figures (111) is set at my request.

How can I separate or add the figure in calculations for simplicity?

for example, 110100 (high) +(or some operation) (low) 111 = 110100111

labmaster.

Code: LabVIEW 2014.

labmaster wrote:

(2) I am using U16 (16 bit) to adopt all of the nine figures but how to remove the first digit or some numbers in order as a final data? (In my code, I just subtract a number between the calculated number.)

for example, (1) 101000111-> 101000111 or (11)-> 01000111 01000111

I use in general AND to hide the bits that I don't care.

labmaster wrote:

(3) in the other curious question, three lower figures (111) is set at my request.

How can I separate or add the figure in calculations for simplicity?

for example, 110100 (high) +(or some operation) (low) 111 = 110100111

It is usually done with some interesting masking (with AND) or the definition of the bits (with the GOLD) and the logical shift.

• looking for integer binary bit element:

Hello

I'm looking for an item that convert singed intger 8-bit individual bit

I use lab view 2011

I try but the element that convert the miss minu my programming table

concerning

Magnin

Array index, just pull downwards until you have 8 items.

• Combine the 8 bits separated for one digital 1 byte

Hello..

Is it possible to concationate binary bits to have a full binary number 1 byte.

Example;

1. I have thease 8 bits--> 0,0,0,0,1,1,1,1--> then binary either 00001111

1. I have 4 groups of 2 bits--> 00,00,11,11--> then binary either 00001111

Is this possible?

There are Boolean function Array to Number in Boolean palette.

• Installation of 32-bit cc InDesign error

Hi all

I tried to install Adobe Creative Cloud - Indesign CC 32-bit on a 64-bit Windows computer. However, I get the below error:

I tried the following:

-Remove all the version of Microsoft Visual C++ and resettlement.

-Tested on 5 different machines (and a non-commercial machine.

-Installed on a clean OS build without Adobe products.

-Reconditioned Indesign CC 32 bit (tested version archive CC), same problem.

-Tried to copy missing packages in the installation folder under the convention of naming below.

-restart the computer after you disable all non-Windows services and startup programs.

Other packages install fine, but we do need indesign 32 bit in the production environment.

Any help would be great. Thank you

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. -------------------------------------- Summary --------------------------------------

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596.  -0 fatal Error (s), 3 (s)

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. Version of the OS Win: 6.1.1.0 64-bit Type: 1

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596.

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. ERROR: DS011: installation package is possibly corrupt. Download the installer again and try again. (Microsoft Visual C++ 2008 Redistributable Package (x 64) 9.0.30729.5677 {512B6D21-18F9-11E2-93C1-00215AEA26C9}: payload not found in the payloads folder: E:\Indesign_CC_32\Build\Setup\IDSN10.0en_GB\payloads\Microsoft VC 2008 Redist (x 64) \vcredist_x64.exe)

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. ERROR: DS011: installation package is possibly corrupt. Download the installer again and try again. (Package redistributable Microsoft Visual C++ 2010 (x 64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9}: payload not found in the payloads folder: VC 2010 Redist (x 64) E:\Indesign_CC_32\Build\Setup\IDSN10.0en_GB\payloads\Microsoft \vcredist_x64.exe)

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596.

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. Please find the error string above to find when the error occurred.

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. These errors resulted in installer exit code mentioned below.

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. -------------------------------------------------------------------------------------

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596.

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. Exit code: 26 - some of the payloads is not found. Please check your Installer.

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. Please see specific errors for troubleshooting. For example, ERROR: DS011...

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. END - Installer Session

21/12/14 19:20:37:486 | [INFO] |  | OOBE. OF |  |  |  | 8596. *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

Not a problem of Jeff.

Yes, unfortunately with production systems existing need the 32-bit version to work on a 64 bit system.

Looks like a Photoshop 32 bit package has been created for an operating system 64-bit here work with:

Photoshop CC 2014 release: separate 32-bit/64-bit installation

Thanks for trying to help.

• Import from 64-bit to 32-bit

Hi all

I want to do an exp/imp comes from a basic oracle 11.2.0.2 64-bit to a database 11.2.0.2 oracle 32-bit. The two are on an OEL (64 5.6 and 5.7 32 bits)
I was examined in all support Oracle and read the following note:

How to use the export and import during the transfer of data across platforms or servers on 32-bit and 64-bit [277650.1 ID]

This, I understand that this is possible, but I don't know how. Can I do the exp with the binary 64 bit and then just import with the binary 32 bits on 32-bit server, or do we I have imp with a 64 binary bits in the 32-bit database?

Thanks for the tips!

solved!

Thank you!

• Impossible to install pieces of updates problem

Hi, I can't install updates. The problem is the background intelligent transfer service. It is not listed under services, but there are files in the system32 folder, after I enter a command window I get this:

Microsoft Windows [Version 6.0.6002]

BIT version installed on the system: 3.0

Version of the file binary BITS:

path of file version langId

C:\Windows\system32\qmgr.dll 7.5.6002.18111 1033

C:\Windows\system32\qmgrprxy.dll 7.5.6002.18111 1033

C:\Windows\system32\bitsprx2.dll 7.5.6002.18111 1033

C:\Windows\system32\bitsprx3.dll 7.5.6002.18111 1033

C:\Windows\system32\bitsprx4.dll 7.5.6002.18111 1033

C:\Windows\system32\bitsprx5.dll 7.5.6002.18111 1033

C:\Windows\system32\bitsigd.dll 7.5.6002.18111 1033

C:\Windows\system32\bitsperf.dll 7.5.6002.18111 1033

Is the secondary BIT DLL active service: No.

Path to DLL BITS secondary service: N/A

Pending file operations: None

Unable to connect to BITS - 0 x 80070424

The specified service does not exist as an installed service.

I am at a loss to know what to do. In addition, I am not savvy computer very, so any help would be appreciated.

Thank you.

Kara bear,
I suggest that run you the fix it tool of this article: reset Windows Update components
First run it in normal mode and test.  If the problem persists then run it in aggressive mode.

Mike - Engineer Support Microsoft Answers

• Is firefox are affected by the last update of windows 10 - since update firefox slow/no answering and asking to be closed - ARRGH microsoft

Why is it every time there is an upgrade microsift everything seems to get mucked up - you could almost imagine it is programmed in so regular is the problem - because the free upgrade windows 10 seems to be problems... Guard clamp upwards mozilla responds don't not etc - someone at - it ideas?

Support for Windows 10 of Firefox will be more fully realized version 40 this is the 39 version.

40 Firefox will not be finalised for a few weeks, but if you are already running Windows 10 maybe you're an 'early adopter' and he won't mind using a beta-test version.

First of all, I suggest you a backup of your file of main parameters (profile). This article has tips on it: back up and restore the information contained in the profiles of Firefox.

Then the beta version is available on the next page (scroll down to your preferred language): https://www.mozilla.org/firefox/beta/all/

In case you're wondering, the traditional criterion of the 32-bit version will take care of all of your regular plugins; the version 64-bit test barely has plug-ins available and perhaps a few other work through compatibility issues.

• Satellite C660-1F1 - Minecraft ha_err_pid error

Toshiba Satellite C660 1F1 my son with Windows 7 Home Preium will not run Minecraft and creates a dump of notification and error with Java runtime environment.

Yesterday, I wiped the laptop with the recovery disk and installed all the latest drivers etc for a clean system as it has been very slow. I was hoping that this may have erased the old problem.

I downloaded the latest version of Java, tried the 64-bit version as the Lpatop seems to be running a 64 bit OS, but I don't think that browsers are Java 64 bit test did not work and also some of the most common suggestions on the bulletin boards Minecraft. such as:--

+ "1) open Control Panel - > system and click on the tab of system properties." Under Performance click settings... button. Click the Advanced tab and under the virtual memory section, click on change the swap file a custom size, with a minimum size of 2048 and a maximum size of 2048. Click OK. (This may require a restart). ++
(+ 2) where your Minecraft.exe file (in Notepad) create a file called Minecraft.bat, paste the following in this file:++
++ java-Xms256M-Xmx768M-jar minecraft.exe "+

But all no no no avail.

Here is an excerpt of the file:-erreur

# A fatal error has been detected by Java runtime environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6fa65861, pid = 4472, tid = 1860
#
# Version JRE: 7.0_21 - b11
# Java VM: Java hotspot Client VM (23, 21 - b01 mixed mode windows - x 86)
# Problematic frame:
# C [aticfx32.dll + 0 x 25861] gslCfxExit + 0xe1
#
# Write core dump failed. Minidumps are not enabled by default on client versions of Windows
#
# If you want to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
# The accident happened outside the Virtual Machine Java to native code.
# See problematic frame for where report them the bug.
#

--------------- T H R E A D ---------------

Records:
EAX = 0 X 00000008, EBX = 0X4DDFEEEC ECX = 0X0000000A, EDX = 0 X 00000000
ESP = 0X4DDFE4F8 EBP = 0X4DDFE504 ESI = 0X4E9E2898 EDI = 0X4E9E07D0
EIP = 0X6FA65861, EFLAGS = 0 X 00010202

I think this thread has the solution. [http://www.minecraftforum.net/topic/1666540-ok-im-getting-really-annoyed-now/]

I searched "aticfx32.dll toshiba satellite c660 error" because the error is related to aticfx32.dll. It seems to be a problem with the video drivers and the C660

• Best practices for the handling of data for a large number of indicators

I'm looking for suggestions or recommendations for how to better manage a user interface with a 'large' number of indicators. By big I mean enough to make schema-block big enough and ugly after that the processing of data for each indicator is added. Data must be 'unpacked' and then decoded, for example, Boolean, binary bit shifting fields, etc. The indicators are updated once / sec. I'm leanding towards a method that worked well for me before, that is, binding network shared variable for each indicator, then using several sub-vis to treat the particular piece of data, and write in the appropriate variables.

I was curious what others have done in similar circumstances.

Bill

I highly recommend that you avoid references.  They are useful if you need to update the properties of an indicator (color, police visibility, etc.) or when you need to decide which indicator update when running, but are not a good general solution to write values of indicators.  Do the processing in a Subvi, but aggregate data in an output of cluster and then ungroup for display.  It is more efficient (writing references is slow) - and while that won't matter for a 1 Hz refresh rate, it is not always a good practice.  It takes about the same amount of space of block diagram to build an array of references as it does to ungroup data, so you're not saving space.  I know that I have the very categorical air about it; earlier in my career, I took over the maintenance of an application that makes excessive use of references, and it makes it very difficult to follow came data and how it got there.  (By the way, this application also maintained both a pile of references and a cluster of data, the idea being that you would update the front panel indicator through reference any time you changed the associated value in the data set, unfortunately often someone complete either one or another, leading to unexpected behavior.)

• displays 2 hearts not 3?

I do not understand why my computer shows that I have 2 cores and not 3?

I ran a test that tells me I have 2 CPU? (Tool of diagnosis DirectX 32 and 64-bit tests)

I have a HP Pavilion a6530f Desktop PC (Vista), features card mother M2N68-(Narra3)
http://support.HP.com/us-en/document/c01357135 Socket: AM2 +.
Compatible with the following processors
Phenom with Quad Core technology (AM2 +)
Athlon 64 X 2 with Dual Core technology
Athlon 64
Sempron, I have a "processor of AMD Phenom 3 X 8450 Triple-Core 2.1 GHz" (Socket: AM2 +)
http://Products.AMD.com/en-US/DesktopCPUDetail.aspx?ID=425&F1=&F2=&F3=&F4=&F5=&F6=&F7=&F8=&F9=&F10=

So I think I sold a computer on which the processor was did not supported by its motherboard?

and it will show only 2 hearts? When I really did 3?

Well, I almost forgot to ask you to try this.

1.run/msconfig (or type msconfig in the search and press on enter)

2. click on the Startup tab

4. check the number of processors, if it is enabled, the UN checkbox and restart

do the same thing again but check the box and select 3 and restart.

• Converts a string (float single precision) in decimal

Hello

I use reading series base and write vi to communicate with a device.  The answer I receive (shown in hexadecimal format) is 4606 8D3B, which from what I understand (this discussion: http://forums.ni.com/t5/LabVIEW/string-to-number-conversion-a-very-interesting-observation/m-p/32170... ) the data is not actually hexadecimal but rather binary and appears just hex for the user.

My camera manual says that this information is "Float - 4-byte ANSII standard simple precision, low to high" and I'm trying to convert this string to a decimal value.  (it should be 0.004 or e-3 xx 4)  So far I've written a program that separates the bytes in a table of 4 bytes, each binary converts and then separate all binary bits and try to group return the binary bits in the exponent and the mantissa to calculate the value, but it seems rather convoluted and I hope that there is a more simple function in that all this is done automatically.  Also, since the answer is low to high, I understand that I must first return the number of 3B8D 0646 make high to low, but I think I did that already, it's just the conversion that I do not know how.

Any help would be appreciated, thanks

Alex

Try this:

• Interpretation of data from stereo camera Bumblebee (PointGrey)?

Hi, first noted that I read the discussion at http://forums.ni.com/ni/board/message?board.id=200&message.id=11236

I am able to access the above stereo camera through my RESUME very well (using IMAQdx) and set it up through MAX. I am also able to access any of the cameras individually by using the option of Pan at MAX (I think I could set this on-the-fly by program, but I'll leave that for another time, less important now.

This is based on the information of PointGrey Research Inc. at http://www.ptgrey.com/support/kb/index.asp?a=4&q=312&ST=bumblebee

The same page also shows that if I place the stereo camera Bumblebee to use Format_7 Mode 3, the resulting 16 - bit image contains 8 bits of the camera on the left and 8 bits of the right camera. I checked (I think) that this is the case, since when I run a drain to the MAX with this mode, I am able to 'white-out' the display of the right camera covering the LEFT camera. And no, this camera no balancing light or such, as a confirmed it by covering the right camera.

So, my question is how can I retrieve this information? A simple matter of data manipulation, I think, but I'm stumped. For now I understand I probably can't do it using the screw IMAQ, would it be necessary to have a loop for, go through the binary bits and separate them? The info about what additional image, how do I know what it takes NOT to separate?

So conclusion, I have a thread of data type Image that contains a 16-bit image, and I would only split into 2 images to 8-bit based on the above.

Based on the advice of the manufacturer of the camera, I have extracted the appropriate data successfully, but now have a new problem, which I will present as a new thread.

For the record, I've used the IMAQdx get Image data VI to extract the raw (16 bit uint) image data and the split table with Decimate 1 d Array to two tables, their resize to the size of array appropriate 2D (640 x 480 for my case).

• Error 1953 VCRedist 2008 X 64 installation on windows Vista [SP1]

The application event log:

Product: Microsoft Visual C++ 2008 Redistributable - x 64 9.0.21022 - Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version = "9.0.21022.8", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "amd64", type is "win32" '. " See Help and Support for more information. HRESULT: 0X8007054F. assembly interface: returned IAssemblyCacheItem, function: commit, component: {2A030FEB-29B5-314B-97B5-ED38673CC885}

View XML details:

BODY {font: x-small "Verdana"; margin-right: 1.5em} .b .c {cursor: hand} {color: red; do-family: "Courier New"; make-weight: bold; text-decoration: No} .e {margin-left: 1em; text-indent:-1em; margin-right: 1em} Laurette {margin-left: 1em; text-indent:-1em; margin-right: 1em} .t {color: #990000} .xt {color: #990099} weather {color: red} .dt {color: green} ".m" {color: blue} .tx {police-weight: "BOLD"} .db{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left : .3em; border-left: 1px solid #CCCCCC; {font: small mail} .di {make: small Courier} .d {color: blue} .and {color: blue}.cb{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;font:small Courier; color: #888888} .ci {font: small mail; color: #888888} PRE {margin: 0px; display: inline}

-< event="" xmlns=" http://schemas.microsoft.com/win/2004/08/events/event ">
-< system="">
< provider="" name=" MsiInstaller ">
< eventid="" qualifiers=" 0 ">11935
< level="">2
< keywords="">0 x 80000000000000
< timecreated="" systemtime=" 2010-05-01T23:58:53.000Z ">
< eventrecordid="">28171
< channel="">Application
< computer="">Kyle-PC
< security="" userid=" S-1-5-21-1767246751-1364921899-3885179243-1000 ">

-< eventdata="">
< data="">Product: Microsoft Visual C++ 2008 Redistributable - x 64 9.0.21022 - Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version = "9.0.21022.8", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "amd64", type is "win32" '. " See Help and Support for more information. HRESULT: 0X8007054F. assembly interface: returned IAssemblyCacheItem, function: commit, component: {2A030FEB-29B5-314B-97B5-ED38673CC885}
< data="">(NULL)
< data="">(NULL)
< data="">(NULL)
< data="">(NULL)
< data="">
< data="">
< binary="">7B33353041413335312D323146412D333237302D384237412D3833353433344537363641447D

at the end of the HTML body. bodyNode.appendChild (document.createElement ("hr")); This paragraph (p element) is the "binary data:"literal string. " var p = document.createElement ("p"); p.style.fontFamily = normalFont; var b = document.createElement ('b'); b.appendChild (document.createTextNode (binaryDataCaption)); p.appendChild (b); p.appendChild (document.createElement ("br")); bodyNode.appendChild (p); / / Display the binary data in the format of words. p = document.createElement ("p"); p.style.fontFamily = normalFont; p.appendChild (document.createTextNode (wordsFormatString)); bodyNode.appendChild (p); Need to use the font to fixed width for binary data. p = document.createElement ("p"); p.style.fontFamily = fixedWidthFont; var i = 0; var j = 0; var s, time; var translatedString; var charCode; var octet1, octet2; Each character of binaryString is a representation of (base 16) hexagonal a / / 4 binary bits. So it takes 2 characters in binaryString to form a / / complete bytes. 4 characters for a Word. While (i< binarystring.length)="" {="" s="(i" 4).tostring(16);="" to="" hex="" representation.="" while="" (s.length="">< 4)="" {="" s="0" +="" s;="" }="" s="" +=": " ;="" dwords="" representation="" is="" simply="" a="" rearrangement="" of="" the="" original="" binarystring="" for="" example,="" from:="" 0000000002005600000000000f000540="" (which="" is="" 00="" 00="" 00="" 00="" 02="" 00="" 56="" 00="" 00="" 00="" 00="" 00="" 0f="" 00="" 05="" 40).="" to:="" 0000:="" 00000000="" 00560002="" 00000000="" 4005000f="" 8="" words="" per="" line,="" 4="" dwords="" per="" line.="" for="" (j="0;" j="">< 4;="" j++)="" {="" s="" +="binaryString.substring(i" +="" 6,="" i="" +="" 8);="" s="" +="binaryString.substring(i" +="" 4,="" i="" +="" 6);="" s="" +="binaryString.substring(i" +="" 2,="" i="" +="" 4);="" s="" +="binaryString.substring(i," i="" +="" 2)="" +="" "="" ";="" i="" +="8;" }="" p.appendchild(document.createtextnode(s));="" p.appendchild(document.createelement("br"));="" }="" bodynode.appendchild(p);="" show="" binary="" data="" in="" bytes="" format.="" p="document.createElement(" p");"="" p.style.fontfamily="normalFont;" p.appendchild(document.createtextnode(bytesformatstring));="" bodynode.appendchild(p);="" must="" use="" fixed-width="" font="" for="" binary="" data.="" p="document.createElement(" p");"="" p.style.fontfamily="fixedWidthFont;" i="0;" j="0;" each="" character="" in="" binarystring="" is="" a="" hex="" (16-based)="" representation="" of="" 4="" binary="" bits.="" so="" it="" takes="" 2="" characters="" in="" binarystring="" to="" form="" a="" complete="" byte.="" while="" (i="">< binarystring.length)="" {="" translatedstring="" ;="" 2="" characters="" in="" binarystring="" to="" form="" a="" byte="" s="(i" 2).tostring(16);="" to="" hex="" representation.="" prefix="" with="" '0'="" until="" its="" length="" is="" 4.="" while="" (s.length="">< 4)="" {="" s="0" +="" s;="" }="" s="" +=": " ;="" show="" 8="" bytes="" per="" line="" for="" (j="0;" j="">< 8;="" j++)="" {="" temps="binaryString.substring(i," i="" +="" 2);="" 2="" for="" 1="" byte="" i="" +="2;" s="" +="tempS" +="" "="" ";="" treat="" temps="" as="" hex="" integer="" charcode="parseInt(tempS," 16);="" if="" (charcode="">< 32)="" {="" translatedstring="" +="." ;="" }="" else="" {="" translatedstring="" +="String.fromCharCode(charCode);" }="" }="" while="" (s.length="">< 32)="" {="" s="" +=" " ;="" }="" s="" +="translatedString;" p.appendchild(document.createtextnode(s));="" p.appendchild(document.createelement("br"));="" }="" bodynode.appendchild(p);="" }="">

 Product: Microsoft Visual C++ 2008 Redistributable - x 64 9.0.21022 - Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version = "9.0.21022.8", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "amd64", type is "win32" '. " See Help and Support for more information. HRESULT: 0X8007054F. assembly interface: returned IAssemblyCacheItem, function: commit, component: {2A030FEB-29B5-314B-97B5-ED38673CC885}
 (NULL)
 (NULL)
 (NULL)
 (NULL)
 7B33353041413335312D323146412D333237302D384237412D3833353433344537363641447D

Binary data:

In the words

0000: 3035337B 35334141 31322D 31 332D 4146
0008: 2 303732 41374238 45343334 3533382D
0010: 41363637 7 44

In bytes

0000: 7 B 33 35 30 41 41 33 35 {350AA35
0008: 31 2D 2D 32 31 46 41 33 1-21FA-3
0010: 32 37 30 2D 38 42 37 41 270 - 8B7A
0018: 2D 38 33 35 34 33 34 45 - 835434E
{0020: 37 36 36 41 44 7 766AD}

Made it several scans using the dependency walker (64 and 86)

Clean orphaned registry files, restarted

I have ' good enough at my wits end, any help would be greatly appreciated

• Can I dig deeper for info OS?

Hello

Part 1

Using the Get - VM and Get-VMGuest, I can get a range of elements. However what I can't do are things like:

-Service Pack installed

-The person who created the virtual machine?

-Last connection to the machine (person id)

Are these pieces of information available IF the virtual machine runs via a feature of vmware tools in the guest OS? (i.e. to assume vmware tools is installed and the virtual machine is running)

Part 2

Some of our ESX are old, i, e, 3.5 rather than 4.0, I guess that means I don't think OS Info? or there is another way?

CH BAT SCADA DataSource:Microsoft Win... PoweredOff v4 Machines 1324 1 Microsoft Windows XP Professional (32 bit) test; OSName = syd - xxxxxx.ci...

Morse of CSR to Build: Build TempScadaVMs 2 1024 Citect historian v4 PoweredOff machine (Morse) Extra Info not available; h/s OLD;

Code snippet

\$comment = @{};

\$a = @{Expression={\$_.Guest};Label="VM Name";width=40},`
@{Expression={\$_.PowerState};Label="State";width=10},`
@{Expression={\$_.Version};Label="Version";width=8},`
@{Expression={\$_.ResourcePool};Label="Pool Name";width=20},`
@{Expression={\$_.NumCpu};Label="CPUs";width=4},`
@{Expression={\$_.MemoryMB};Label="MemMB";width=6},`
@{Expression={\$_.Description};Label="Description";width=40},`
@{Expression={\$comment[\$_.Name]};Label="Notes";width=80}
\$info = Get-VM -Location \$MyDataCenter

ForEach(\$vm in \$info)
{
\$extra = Get-VMGuest -VM \$vm

if (\$extra.OSFullName.Length -eq 0)
{
\$comment[\$vm.Name] = 'Extra Info not available; '
}
else
{
\$comment[\$vm.Name] = \$extra.OSFullName + '; OSName=' + \$extra.HostName + '; '
}

if ((\$vm.Version -eq 'v4') -or (\$vm.Version -eq 'v5') -or (\$vm.Version -eq 'v6'))
{
\$comment[\$vm.Name] += 'h/w OLD; ';
}
}

\$info | Format-Table \$a

### Maybe you are looking for

• While you try to use Windows Update Standalone Installer due to failed update, Setup independent of itself will not work.

OK so I was installing an update marked as important (update for Windows 7 and Windows Server 2008 R2 Dynamic Installer for x 64 systems (KB974332)) and for some reason any as he tried to install this error message update (updates some were not insta

• Can't tell if my WIFI works?

I had to reinstall Vista (no surprise), but now I can't tell if my WIFI works.  The light on my laptop doesn't work anymore.  My daughter has a laptop and that she can get on her own and connect using the network I created previously, but I can't see

• Products of disk cleanup does not not to remove older restore points

Hi, I use Vista Home Premium sp2, and although I had this problem for a long time, I barely had time to ask about it. I have a separate drive (physically) for my backup/restore points, whenever it fills the only way I can do anything or is to format

• (Redirected) dell xps 9530

Help, please I have a problem with my new xps laptop 9530 in the view of every thing is small with the resolution of 3200 and impossible to find a key to enable or disable the mouse button Please answer

• Mac address of the block

Hello I use a router cisco 1841, I need to block the MAC address I applied the access-list command 1102 deny 0000.0000.0000.0000 mac address... but it does not work Can anyone suggest... Thank you Jeevan.