BIOS does not stop


Hi again once I have set myself. the F11 key was jammed, I had to pull it up. Save and exit the bios and everything work well. Thank you

Tags: HP Desktops

Similar Questions

  • Satellite A500D - fan does not stop

    Hello

    Two days ago I updated the Bios to version 1.20 win, and since then, the fan is constantly at 72% and the temperature of the CPU at 36 º.

    At Toshiba, I say it is normal, but the fan does not stop at any time and the noise is annoying.

    Anteriormento updated the BIOS, the fan stopped and started and never surpassed 54%.

    Looks like a vergueza by the care service, they have given me, I tried to deceive, as is normal for a portable fan that keeps 72%.

    Please I need someone to tell me where I can download before my Bios and how to install it.

    PS: My processor ens Turion Rm-77.

    A welcome message

    Hello

    You mean the cooling module fan didn't run all the time with the previous BIOS version?

    Well, in this case you must downgrade BIOS to the previous version.
    The problem is that you can download the latest version of the BIOS from the Toshiba page.

    But maybe a Toshiba ASP might help you and may downgrade the BIOS to the previous version

    But have you tried to change the settings in Win 7 power option?
    You can find it in the control panel-> power options

    There you can change modes of single power supply.
    In the power settings advanced, you'll find settings Toshiba energy saver and there you can change the method of cooling while the laptop is running on battery or power.

  • HP pavilion x 360-11-n011si: BIOS does not boot form USB key to CD USB even when the value of UEFI to allow

    Hi all

    I have a laptop beatsaudio that has been upgraded to win10: the HARD drive failed and I replaced it with an SSD.

    The BIOS does not allow to boot from USB USB even when CD install to UEFI key.

    Any help will be appreciated

    Hello

    I realized a work around:

    Secure boot off

    Legacy support on

    and here's the big one

    Boot HDD in legacy should be last on the list

    The BIOS does not recognize that there is no. OS installed and continue to the next boot device as any other bios hp good done, it just stops putting so he can finally boot USB.

    Thank you

  • After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

    After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) restart you device.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

    Council: https://discussions.apple.com/docs/DOC-9892

  • Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

    Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

    If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

    You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • Satellite P200 - 143 BIOS does not refresh

    Hi all. New here.

    Try to update the BIOS on my P200-143. The current version is v1.30, I; v2.70 ve downloaded from the Toshiba Web site, but every time I try and flash, I get the error code:-120 to winphlash

    BIOS update failed! New BIOS is not compatible wth THE current system BIOS.
    New part number of BIOS does not have part number for the system BIOS.
    Error code - 120

    Any help appreciated.

    No help from here but I replaced Windows 10 64-bit with the 32-bit version, then the BIOS flashed fine v1.70. I unfortunately still the problem of the orginal laptop reboot when I keep plugged in, rather than close.

  • Satellite R830-143 - update of the BIOS does not support this operating system

    Hello

    I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

    The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

    I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

    Does anyone know what is the problem?

    Thanks in advance for your help...

    Hello

    You have problems with the laptop?
    If not then why you want to do the BIOS? Just because the new BIOS is released?
    I would not change anything if my laptop is running correctly.

    However, the update of the BIOS requires the VAP (value added package).
    So remember that this PPV is installed correctly. If this isn't the case, so far.

  • Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

    Hello

    I bought a new Pro A30 of Satellite earlier.
    Shortly after, I noticed the system sometimes
    would freeze, with a rattling of the HD.
    A reboot cold was the only solution.
    I was told to replace the HD I did but the
    problem persisted with the new HD.

    I tried a known working HD and the problem still persisted.
    At this point, the warranty period has increased.
    Frost started happening more regularly, and
    now, the BIOS does not recognize the HD player or DVD.
    It starts and then try to boot from the network,
    because he doesn't have a HD or DVD player.

    At this point, I think I need a new system board.
    Someone at - it other advice or seen this problem
    before?

    Thank you
    Ray

    Hello

    What happens if you remove the CD/DVD drive or the HARD drive?
    The laptop recognizes one of these devices?
    Have you used the devices recommended by Toshiba?

    in any case, this seems very strange and the dysfunction of the motherboard is not impossible

  • Satego x 200-BIOS does not detect SSD but windows 7 for OS usage

    need help here, I got the latest bios 2.50 and my bios does not detect the SSD but an I start windows 7 from my hard drive it is detected and I want to use the ssd as boot drive, please help

    Hello

    Which SSD drive you have exactly?
    I also think it s a compatibility problem between the HARD disk controller (motherboard) and the current SSD drive.

    So you should check if you have the latest firmware of the SSD drive and if it of possible, try another disc SSD of a friend, for example.

    By the way: have you tried to load the default settings in the BIOS?

  • Satellite L355 - dreaded blue screen - Bios does not end

    I have a new Satellite L355.
    Sometimes at startup I get the DBS.

    Otherwise said, the bios does not end and the screen is blank.
    Laptop repair center replaced the motherboard twice, but I still have the problem.
    I found that if I turn off the power and remove the battery, I can start very well after the replacement of the battery.

    Does anyone know why the battery clears the problem?
    Toshiba technical support often has a user that to clear a trouble report. They must know something.

    Thank you, jack

    > Occasionally when booting I get the DBS

    That would mean that this sometimes happens from time to time but not always
    Is this good?

    I think that it of difficult to say what's going wrong here because the question is not always happens... so it is difficult to replicate it
    Usually if the POST (power on self-test) cannot transmit properly then that would mean that a material error has been detected somewhere on the map

    Maybe you should check if the laptop using the latest version of the BIOS.
    If a new BIOS has been published, then you should try to update.

  • Tecra M3-264: the fan does not stop

    Hello

    I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
    The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

    Is this normal in this model or should I take it to the service?

    Hello

    It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

    By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

    Good bye

  • Satellite 2800 - BIOS does not recogize Toshiba 40 GB HARD drive

    I have an old Toshiba S2800 (if-200 questions in total). He was works very well with a 10 GB HARD drive for ages. Yesterday, I thought that putting his hard drive to a bigger.
    Removed the old and installed a new hard drive, Toshiba MK4026GAX. On the power on the BIOS does not detect the HARD drive at all. I can hear the humming noise (platter (s) rotating), but apart from that, there is nothing. The BIOS indicates disk mode HARD is "unused" and also on page 2 is none shown on the primary hard disk IDE channel. (tried to boot Linux from a CD to see if who sees anything on the IDE channel, but apparently the primary IDE channel is disabled if the BIOS does not detect a master or a slave connected device). Change the mode of the master to the slave na HARD drive? t change a thing.
    The BIOS version is 2.00. Tried to find an older one without success.

    I thought that the BIOS has a limit of 32GB, but when I connect a 120 GB hard drive (WD scorpio), it has been recognized by the BIOS and the PC was ready to boot from the device.

    I would have thought computers laptop Toshiba were at least compatible with another device (e.g. hard drive) Toshiba

    Someone has any idea how to operate?

    Thanks in advance!
    Robbie

    Hello

    It of very strange that the 120 GB HDD has worked on your old Satellite 2800 unit.
    I know that the BIOS would not recognize these large HARD drive sizes.

    In any case, seems the purchased disk is not compatible with your laptop and you can buy one that is supported.
    I discovered that the 20 GB HDD MK2016GAP could be compatible
    http://www3.Toshiba.co.jp/storage/English/spec/HDD/mk2016.htm

  • Satellite P10 304 BIOS does not detect HARD and CDROM drive

    My HDD p10-304 has recently failed.
    I bought a new 60 GB western digital 2.5 drive "and installed today.

    At startup, the BIOS does not detect the drive, but also, it does not detect the CD-ROM drive.
    This makes me think that maybe it's not the player after all, maybe the onboard IDE / motherboard.

    I'm kinda stuck, so it's a new drive should work fine, and I have no way to test the motherboard.

    The only difference is that the insulation on the original drive sleeve should be reduced by half.
    The bit important (low, where the circuits would otherwise affect metal) is always there, it is the
    Few albums I had to remove but that should be no problem.

    Someone at - it suggestions?

    Thank you, Stu.

    Hello

    What happens if the HARD drive is not connected to the motherboard? The BIOS recognize the CD/DVD drive correctly?

    You bought the HARD drive compatible? To my knowledge the Mobile supports a HARD drive with interface IDE (ATA-5) increased.

    But as you said possibly the motherboard failures and he would be advised to contact the technician during a particular test

  • Satellite A30 PSA30E - BIOS does not recognize the HARD drive

    Hi all
    I have a Satellite A30 (PSA30E) and I start the computer. When I enter the BIOS it does not recognize the hard drive.
    Does anyone no what I can do?
    Is it possible to restore the BIOS?

    Thank you

    Hello

    You replaced the HARD drive by a new one or the BIOS don't recognize the old HDD?

    Usually if the laptop is not able to start and that the BIOS does not see the old HDD then I guess that the HARD drive is faulty.
    If the BIOS doesn't recognize the inserted new HARD drive and then either you ve bought is not compatible, or the size of the HARD drive is just too big.

    Please provide more info. You see error messages?

  • E540: Fan does not stop

    Hello Board and support team!

    The fan in my e540 does not stop once it began to turn. It is completely independent of the system temperature. Even if the room temperature and the cpu is less than 40 * C the fan will not stop.

    The fan does not always turn, however. If I wake up the system from sleep mode or turn it on, the fan does not turn and will not start spinning until a certain threshold temperature is reached. This part of the fan control works correctly.

    Interesting procedure: I work until the heating system and the fan starts. I waint until the system is cooled below 40 * C (checked with software speccy, the flow of air leaving the laptop is cold). The fan is still running at this stage and will turn probably forever. I suspend the laptop (no full stop not required). I immediatally 'wake up' the laptop (temperature of the system has not changed, no time to cool). The fan is off again and will not start turning until the temperature threshold is reached.

    What can I do to fix this? I don't always want to suspend my laptop to turn off the fan. She has to stop on its own.


Maybe you are looking for