BIOS of the computer 0xc004f063 Portege Z30-B-117 lack license required

Similar Questions

• Evo 500: how easily Flash of the bios on the computer

  I have trouble understanding how to Flash the bios of the computer, I put up.  Can someone give me a step by step method how?

  Let me offer you some general tips to make the updates to the BIOS...

  Caution: an upgrade of BIOS defective or broken, unlike an upgrade of the driver, can leave your PC in an unusable state - essentially, turning it into a "brick" electrick
  
  Thus, before any update of the BIOS, ensure that the following TWO are met:
  (1) you have a way to save on the current BIOS of some media that allows you then to restore it, if necessary
  (2) you have a way to boot the PC so that you can restore the BIOS since the recorded media, in which case the BIOS update fails or trashes otherwise your PC

  So, as long as the application of updated BIOS provides you with a way to do both 1 and 2), then flashing the BIOS is safe, because if the PC are lost, you will be able to rely on 2) to restore the original, working, BIOS.

  In addition, if you do this on a laptop, at least have the power adapter is plugged when you do that.  Not sure how many people try this on battery power that have the battery before the upgrade flash is done!

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• 0xC004F063 bios of the computer is missing license required

  Hello

  I reinstalled Windows 7 a bit more than a month, and then a few days ago I got messages saying my version is not valid, and when I followed the steps recommended to enter the product key I got the message from 0xC004F063 saying: lack me a license required.

  I have no sticker on my laptop (HP ProBook) who was one of the many bought by my company.

  The product key, I got through an online diagnosis service.

  Here's my Diagnostic report.

  Thanks for your help.

  Ian

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - 788W3 - H689G-6P6GT
  The Windows Product Key hash: yr8OHoeXhbT4dc6MxGYjdAStSPY =
  Windows product ID: 00371-OEM-8992671-00008
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {FFEC2638-58DB-4F3B-AC7F-CCCA7571B408} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Status of office: 101 non-active
  Microsoft Office XP Professional - 101 non-active
  Microsoft Publisher 2002-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_3E121E02-372-80004005_3E121E02-322-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {FFEC2638-58DB-4F3B-AC7F-CCCA7571B408}1.9.0027.06.1.7601.2.00010100.1.0.048x 32*-*-*-*-6P6GT2S-1-5-21-540487187-2398283291-2519360910Hewlett-PackardHP ProBook 4530 sHewlett-Packard68SRR worm00371-OEM-8992671-00008. F.0920110513000000.000000 + 00067BA3707018400FE08090409Ulaanbaatar Time(GMT+08:00) Standard03HPQOEMSLIC-MPC101101Microsoft Office XP Professional1048779296E9955B0AyjwuUHxYRPbfJSuP2 RJ57ykc plus54186-OEM-1792772-713524100Microsoft Publisher 200210x6MiqtZDRxsTf3nd8UAOAELN008 =54197-OEM-1691301-633524 A381E7A6CD87B70

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700008-02-2057-7601.0000-1142014
  Installation ID: 021432840206793536407555682430260595568982975194209982
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 6P6GT
  License status: Notification
  Notification reason: 0xC004F063.
  Remaining Windows rearm count: 3
  Time to trust: 24/04/2014-10:44:07

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C533
  Beyond: 0 x 0000000000000000
  Event timestamp: 4:24:2014 10:22
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MAAAAAEAAQABAAEAAAACAAAAAwABAAEAJJRKDIaqSnEqcLTA/p5cw2ajFLxcci5z

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC HPQOEM 167C
  FACP HPQOEM 167C
  HPET HPQOEM 167C
  MCFG HPQOEM 167C
  ASF! HPQOEM 167C
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SLIC SLIC-MPC HPQOEM
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci

  I own a ProBook's product key on the COA sticker in the battery compartment, look here.

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• This copy of windows is not genuine - 0xC004F063 bios of the computer is missing license required

  I had a friend install a SSD on my laptop about a month ago, and my Windows 7 installation worked fine. But yesterday, I suddenly had this error message saying that my copy of windows is not genuine. Can someone help me with this?

  It is the diagnostic report:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {68877C01-F655-48DC-BA8F-FC614A29BF77} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.130104 - 1435
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {68877C01-F655-48DC-BA8F-FC614A29BF77}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1547156946-2243871481-593275757Hewlett-PackardHP ProBook 5320 mHewlett-Packard68AFU worm. F.2020110916000000.000000 + 00093B90600018400FC08130409Romance Standard Time(GMT+01:00)03HPQOEMSLIC-MPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-2067-7600.0000-0842013
  Installation ID: 004832361196076674551954651255134730168343993681566451
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: Notification
  Notification reason: 0xC004F063.
  Remaining Windows rearm count: 3
  Trust time: 25/03/2013 20:06:48

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 3:9:2013 17:02
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID hash: MAAAAAAAAgABAAEAAAACAAAAAwABAAEA6GH0rrhqiIJcr1gH7CkE1qgoPPxsq1xd

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC HPQOEM 149 B
  FACP HPQOEM 149 B
  HPET HPQOEM 149 B
  MCFG HPQOEM 149 B
  ASF!            HPQOEM 149 B
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SLIC SLIC-MPC HPQOEM
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci

  elineesprit

  The problem is that your system cannot properly read your BIOS SLIC table - maybe it's a minor problem, or it is possible you have a counterfeit installation.

  Please try first to re-create the license store.

  Re-create the license store

  Go to start > all programs > Accessories

  Right-click on command prompt and select run as administrator - accept the UAC prompt

  Run the following commands in the command prompt window, press enter at the end of each

  net stop sppsvc

  (expect that the service is stopped before entering the following lines)

  CD %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform

  Tokens.bar tokens.dat REN

  net start sppsvc

  slui.exe

  After a few seconds, the Windows Activation dialog box appears.

  You may need to reactivate and/or re - enter your product key or Activation can occur automatically.

  If you are prompted for your key, use one on the COA sticker on the case of the machine

  Restart and after returns with a new report MGADiag

• How can I check the BIOS of the computer?

  I read somewhere that I can check if it is enabled in the BIOS settings? How can I do this?
  I have the Satellite Pro A200.

  If you want to enter the BIOS settings just follow what is written on the screen when you start your laptop. In the lower part of the screen, you will see every task with something like press F2 to enter SETUP.

  That s it!

• Can't access BIOS on the computer laptop 15-R030wm

  I have a laptop that was recently dropped, and since then, I found that the hard drive has been damaged during the process.

  I bought a new hard drive and installed the drive and I wanted to get into the bios so that I can change the device to boot to a USB key... but I can't get into the BIOS.

  I tried the tapping/now the key ESC, F1, F2, F8, F9, F10, F11, F12 to turn all this without success. I have tried removeing the battery and the charger to the laptop and now the power button down for 30 seconds. Still no luck.

  The system starts just a screen that says;

  Not found boot device. Please install an operating system on your hard drive. Hard drive (3F0).

  Anyone have any ideas?

  Well then... I'll answer my own question.

  Connect a USB keyboard with separate 'F' keys and press F10.

  Well thanks, it works!

  You are welcome!

• service of said software licenses bios lack license required. error code, 0xc004f063,... What can I do to fix?

  When you are trying to activate, a build 7601, windows 7 complete edition, the information above, is what they gave me... would finally solve!  any suggestions? help please.

  This message seems to indicate that you have an OEM version of the "brand-locked."  Windows 7 complete edition requires a specific make / model computer before automatic activation can operate.

• What is the number of keyboard for Portege Z30-A-1E5 part?

  Hello
  I want the Toshiba Portege Z30 A 1E5, but is apparently available for purchase of the German and Austrian sellers with the QWERTZ keyboard. I would like to buy an and Exchange on the keyboard AZERTY or QWERTY (UK).

  However, I spoke with a company that and they can't confirm that they can get a part unless I can provide a reference number of keyboard (they also cannot give me a quote without it), but this number does not seem to be easy to get their hands on without actually having the computer and take off the keyboard and research under! I feel a little nervous about spending so much money when there's a chance that I won't be able to reverse the keyboard.

  So my question is, can someone tell me what the part number of the keyboard is for the a-z30-1e5 portege?

  Any help would be appreciated!

  Kate

  Hi, Kate

  I m wondering why you want to buy a Portege Z30-A-1E5 that isn't available in the United Kingdom?
  The notebooks are pre-installed with a Windows system in different languages. In the case of Portege Z30-A-1E5 available in Germany, the system language would be German.
  The keyboard also supports a different layout.

  Portege Z30-A-1E5 was equipped with a processor i7, SSD 512 GB and 16 GB of RAM disk.
  Very similar Portege laptop, Z30 - has - 1 6 was released in the United Kingdom. Its preinstalled with the Windows system in the English language and English keyboard layout.
  Of course, the hardware specs are a little bit lower (256 GB SSD drive and 8 GB of RAM) but I think that this could be improved is much easier to replace the keyboard.

  However, where you can buy the Portege Z30-A-1E5, I recommend contacting the maintainer authorized Toshiba in your country for replacement keyboard. Guys could control the keyboard of Toshiba law and could perform the replacement.

  Just a note: the replacement must be performed by service provider authorized because of the validity of the guarantee. The replacement must be performed by an approved engineer to keep the warranty valid.

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Noisy fan Portégé Z30-B-117

  Hello

  I have a problem with my new laptop Portege Z30-B-117,
  He really noisy fan, I was forced to use battery saving mode, without which I can't work on this machine.

  The fan speed is absurdly designed.
  There are a lot more speed, even when it does not heat.

  Please make a new bios with the smart fan speed, then it will be the best phone on the market!

  Thanks in advance.

  Sometimes the fan activity would increase where the processor is loaded by some background process.
  I've had the laptop from another manufacturer and the fan speed was high due process that runs in the background. From time to time the process has locked the CPU (up to 80%-90% of CPU usage) and during this time, the speed of the fan was very high.

  I spend a lot of time to learn about this process, and finally, I discovered that my antivirus software (it was Norton) the CPU load. I switched to Avira and Avast and this question doesn't seem anymore.

  However, I guess that the CPU could be occupied as a result of any background process

  By the way: you're right: BIOS contains fan table and this table fan gives indications how to control cooling modules. But the fan activity depends not only on the BIOS as I said above: background as well as the CPU processes affect the speed of the fan.

• How downgrade the BIOS on Portege Z30 - B?

  Hi all

  I updated the BIOS on my laptop Z30-B-119, and it is much worse than the original BIOS, so I want to downgrade it.
  There is no way to save the original BIOS during the update and the previous BIOS is not available on the site.

  Someone has the original BIOS and knows how to extract?

  Maybe someone knows how to contact Toshiba technical team directly? (Don't see what they have implemented in new BIOS, I have no hope they read on this forum or user opinions).

  If you're wondering why I want to downgrade and what's wrong with him, see below for an explanation.

  I was convinced that the new BIOS might resolve the problem with the fan, which works well too early, but it turned out they made much worse! The fan will now light at 42 °. Seized 50 °, which was already a Toshiba engineers stupid choice, provided that the side of the CPU temperature is 105 °, so that they could keep the laptop quiet at least until 60 °, especially as many people's complaint of the fan in this model. Instead, Toshiba has done the opposite and lowered the temperature even more.

  How foolish choice their engineers do, I will never buy another Toshiba and will not recommend anyone buy their products. But since I have already made the mistake one bought a Toshiba laptop, I hope that I will be able to downgrade the BIOS or contact them to request an update.

  Let me know if you know how to do it.

  Toshiba Portege Z30-B-119 PT253E - 01100XPL
  This European model belongs to the PT253E series

  The Portege Z3x - B PT253U (same model) was released in the United States and it supports the same BIOS

  The BIOS for the PT253U is compatible withE -PT253 and can be downloaded here:
  http://support.Toshiba.com/support/v...tentId=4007631

• Portege Z30 wasted the time of BIOS

  I have the latest version of the BIOS (3.7, 1.40). I update the time of BIOS, press 'OK' and then F10 and then 'Yes', restart the computer and the operating system time is correct. But as I soon, stop the computer, the time information are lost again (alwas 2 hours late, I think that default GMT).

  The computer is new and all the other BIOS configuration are saved correctly.

  Any idea?

  Try Please charge the battery completely RTC. Turn on your laptop and let it at least 24 hours.
  RTC battery will be charged when the laptop is turned on, connected to the power supply and battery must be fully charged (100%).

• Fingerprints on the Portege Z30-A-12 q utility does not work

  Hello

  I need help with this issue:

  I have installed fresh windows 8.1, the same version as before, but this time I chose UEFI on BIOS. When I used the BIOS the fingerprint sensor was working fine, but now it says "unable to connect to the probe.

  I use Toshiba Portege Z30-A-12 q i5-4200 256 GB SSD, or PT243E model. I've searched the forums and found a similar problem with another Toshiba R product that was resolved by adding an exception to the firewall.

  Utility of fingerprinting with the exception of firewall, even disabled firewall all the way, but always the same problem, I added. In Device Manager, I have biometric sensors (WBF) (PID = 0010) validity under devices.

  I also checked in the BIOS to see if it it turned on and it is.
  The only thing I changed in the BIOS are Secureboot (is on) and has chosen CSM (UEFI), but I think that these settings are not relevant to the problem because they are used for starting.

  I tried to uninstall and reinstall the driver 3 times.

  Please help me with this problem.
  Thank you very much
  Andrei Colombi

  UEFI / start MSC mode has no influence on the fingerprint sensor.

  You said you did a clean install of 8.1 to win.
  I guess that the problem is related to the driver missing or utility.
  I guess you do not have all the essential software available on the Toshiba UE driver page.

  System driver Toshiba to win 8.1 must be installed. It is very important driver package.

  But also try to register fingerprints first in the Windows settings.
  Go to the control panel? Audio equipment &? Biometric devices
  To the left, click Change biometric parameters
  Now, you will see two options: WE (marked) biometrics and biometric OFF (unmarked)
  Now, go to biometric OFF and save changes
  Now go back and click on settings again biometric change
  Now return to the biometrics IT and save the changes.

  Now, you have to click on use your fingerprints with Windows and register fingerprints.

  I think it might be useful to get the utility of fingerprinting works again.

• New Bios for Portege Z30 - has Changelog

  Hello
  If someone has tested the new bios (4.20 - WIN (ECB1.40)) for the Toshiba Portege Z30 - A or is it an official change log?
  Toshiba did not alter the fan behavior? The fan isn't fort/boring, but he could kick a little later.

  Concerning

  Someone has already installed the new bios?

• Password locked Portege Z30-A-10Z - necessary BIOS.

  Someone at - it backup the bios of your laptop Portege Z30-A-10Z.

  My laptop bios locked me by password and need to program a new bios with new bios chip.

  I can't prove ownership with Toshiba with the original receipt so that they will not help as I bought it on ebay a wile back and the seller is is most homologous :(

  This is very stupid situation now. If your laptop is locked by word password BIOS you have big problem now and nobody here can help you. BIOS password needs to be eliminated by the authorized service provider.
  BIOS password is a function of security very important for any problem with machine locked should be handled by ASP. There are several different methods for BIOS password removal and it has nothing to do with the backup BIOS or some sort of new BIOS Setup.