BIOS or boot password

Similar Questions

• HP stream 11-d001dx / 11-d010n: Bios boot password

  Please help I need a BIOS boot password
  Recovery for my computer code
  Stream HP model number
  11 - d001dx or d010nr-11, I get this message
  System disabled
  54852504

  Hello

  Enter 41730520

  Kind regards

  DP - K

• Portege A100 PPA10A - update the BIOS to boot from a USB device

  Hello

  I have an old Portege A100, model: PPA10A-0002LP, but I can't seem to find this model on any Web site of Toshiba, closest I've seen is the "PPA10A - 0002 L'.

  I am wanting to know if there is a BIOS update that will allow me to boot from a USB device.

  The question I have is that I need to reinstall Windows, but the CD ROm cannot read disks.
  This network PXE boot, but I'm new to this sort of thing and have absolutely no idea what to do here.

  Any help would be great,

  Thank you

  Hello

  Portege A100 seems to be developed solely for the Australian market.
  As you say it is a model number Portege A100 PPA10A - 0002L listed on the Australian page of Toshiba Portege A100 PPA10A-0002LP belongs to the same series which is PPA10A
  So in my opinion, the BIOS should work too.

  Anyway, I doubt that the BIOS update will add boot options.

  Usually the BIOS supports booting from CD/DVD drive, drive HARD, LAN and USB FDD.
  It should be possible to boot from a boot disk using a USB FDD drive.
  I doubt you'd be able to boot from USB WEIRD since this Portege A100 supports an internal CD/DVD drive.

• Satellite A110-195 after the bios update request password

  After that I updated the bios I have download the form from the website of toshiba for laptop and update if windows it asks for the restart. After laptop computer reboot start too ask for password for bios and system password. now, I can't get to the system.

  I try default passwords like Toshiba, BIOS, CMOS, phoenix and PHOENIX. and did not work. Battery CMOS in a110-195 is soderd on the motherboard. Y at - it no rider that I need to get around to clear cmos.

  Hello

  This strange s boyfriend.
  Why BIOS put a password automatically after the update?

  Anyway. As far as I know the BIOS password can be removed by a technician of the ASP only these guys know how to remove the BIOS password
  I think that ASP is your last chance to get the password of PIF removed from the system

• How to get into BIOS and boot on Satellite C50-A-1GZ menu?

  Hello

  in other words, how to start the BIOS and boot my Toshiba C50-A-1GZ menu?
  Thank you

  Hello

  As a first step you must perform complete closure. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  Restart your computer and press F12. There you should find the configuration options for the BIOS settings.

• Satellite A55-S1065 - after removing the battery, BIOS ask me password

  So, something happened yesterday, and it seems to me that it is very strange.
  I have a portable Satellite A55-S1065. And while I was with power point, the
  computer crashes. In the midst of my confusion, I decided to delete
  the battery just to make him stop.

  So I did it and plugged it again
  and I tried to turn on the computer. Now, the bios ask me a password,
  but I've no idea what password it is that. Can someone help me solve this problem?
  IM really desperate to find a solution to this since this computer contain
  many of my works.

  Thank you very much.

  > After removing the battery, BIOS ask me password
  I know it may seem silly now, but I never heard of something like that. I use laptop for a long time and I had the experience with many others and strange question, but something like that, never.

  Problem is that we are dealing here in the public forum and BIOS password is a very sensitive area and very important security feature, so we can not write here about some illegal ways how you can remove the BIOS password.

  If there is no way to start your laptop, I recommend you contact the nearest Toshiba service provider and ask for help.
  I'm sorry. :(

• Satellite P840 - Accessin the Bios or boot boot order

  Howdy all, first post here.

  I have a Satellite P840, part PSPJ6A - 00 h 001

  Windows 8.

  I have difficulties to access the Bios or boot order. I need to boot from a CD/DVD and I can't go in the boot options to change the boot order.

  I tried F12 F2 repeatedly pressing boot, pressing F12 and hold for 1 second (according to the manual) with no luck.

  What Miss me... I've never not been able to get start options before. The only thing is that it is Win8 which I am not familiar with.

  Any suggestion would be appreciated.

  Thank you

  Perform the shutdown complete http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm, restart the laptop press F12 and you will be able to enter the boot menu. Here you can choose which device should be the first boot device.

• Laptop Presario CQ62: SETTING THE BIOS TO BOOT FROM a USB STICK

  I need to set the BIOS to boot from a usb key. The options in the BIOS are
  BOOT CD-ROM
  Startup disk
  Internal network card

  And in the boot order:
  USB disk on key/USB hard drive
  USB CD/DVD ROM drive

  Portable hard drive

  USB floppy drive
  Internal CD/DVD drive

  ! Network adapter (but it says that the ability to start will be disabled if the device is marked with an exclamation point, which, in my case, it is)

  A question who should I set to boot from a usb flash drive which has the operating system that you want to install Windows?

  I tried boot F9 options, but it gives me two options:
  Portable hard drive
  CD/DVD drive.
  No drive Flash Drive or USB in the list options.

  Then he said: press F10 for BIOS Setup Options. That's why I'm trying to see what to implement as boot device in the BIOS boot options.

• TOUCHSMART HP ENVY 17-J178CA: set the bios to boot to DVD

  How can I set the bios to boot from the DVD?

  Can not know how to set the boot menu to start a DVD disc.

  Appreciate any advice... Thank you

  Hello

  Try the following.

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  You must set the Secure Boot to disabled and legacy devices on " Enabled".

  When you're finished, press f10 and select this option to Save the changes.

  You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Insert the DVD and the laptop shutdown .

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select the option of CDROM and press ENTER - if you are prompted to "Press any key to continue...". "- make.

  Note:  If the DVD you want to boot from a Windows 8/8.1 installation disk and your hard disk has a GUID Partition Table (it will almost certainly unless you have changed it), you have to select the CDROM (uefi) option in the Boot Manager menu.

  Kind regards

  DP - K

• Step by step how to set up bios to boot XP Lenovo 3000 K series?

  Hi all

  IM has been trying for several days to install xp on my PC, but it does not work. Ive also tried to install recovery DVD that Ive got with the PC but each time it seems same message that Ive had a problem with my HDD and the fourth to solve the problem in the BIOS. I tried Hurd, but no luck. I know that I've to change the AHCI RAID but I can't find this option in the BIOS.

  I have to please anyone can give a step by step how to set up bios to boot XP on Lenovo 3000 K Series.

  Thanks in advance.

  Hello

  Ive solved the problem by removing the battery for a few minutes clear the BIOS.

• I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD.

  Hello Comunity Microsoft :D My name is Mike and I built a gaming pc. Everything was going well for the first 3 days, but now I have a few crashes very violent. Speakers in loop and buzz and screen lock. I have to completely shut down to go back to a working state. I did everything I could possibly think of to solve this problem, but I can't.

  Then. on the problem. Today, I decided that I was able to solve all the problems by reinstalling windows. I had my keys together and put the disc in. I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD. I do and I get normal loading windows files, and at the end of this road, I get the Welcome screen in windows7 with no option and a fat slider. I don't have the little box that tells me that I can fix my computer or reinstall windows, NOTHING. I tried several times and received the same result<--(Insanity: root="" meaning...="" just="" saying)="" so="" i="" called="" windows,="" or="" had="" windows="" call="" me="" rather,="" and="" the="" tech="" says="" she's="" never="" heard="" of="" such="" a="" thing="" happening,="" and="" walked="" me="" through="" all="" these="" steps="" that="" i="" have="" already="" tried....="" still="" no="" help.="" so="" i="" am="" asking="" the="" community.="" has="" this="" ever="" happened="" to="" you="" and="" how="" did="" you="" make="" it="" work.="" and="" please="" don't="" post="" a="" list="" of="" regurgitated="" back="" log="" fix="" lists.="" rest="" assured="" i="" have="" already="" done="" it="" and="" failed="" to="" receive="" a="" different="">

  Just to isolate the problem, try to download a new copy of Windows 7, and then try again:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Regarding problems with the computer itself, try to disconnect all nonessential equipment attached to it to see if the problem persists.

  I would also try switching around components such as modules of memory to see if the problem persists.

  I would also check to make sure that all components are mounted and installed correctly.

• change of password blocked by objection of pre-start but have no pre-boot password

  In Windows 7 when I - administrator - try to change password I am prompted with the message that pre-seed opposes my new windows user password, but I did not start with a pre-boot password.  Then the process continues with nothing accomplished.  How to spend it?

  The message is generated by HP protect, not by Windows. You need to consult the FAQ from HP or send a note to the HP technical support. You can also search Google with these keywords:

  Pre-seed 'HP Protect' security

• HP Pavilion G7 Bios power-on password

  Can you please help me with Bios / power on password on Pavilion G7 P (P/n: LK903EA #UUG), disabled System Code: 58687075

  Thank you.

  Hello

  Enter: 47785071

  Kind regards

  DP - K

• Tecra S2: Question of characters with the BIOS boot password

  This is my laptop:
  Tecra S2: Intel Centrino Mobiltechnologie mit Intel Pentium M processor 740 / XP Pro / 512 MB DDR / 80 GB/15 "SXGA TFT / CD - RW - DVD - ROM
  Model PTS20E-18S032GR number
  purchase 30/01/2006
  link:
  HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0

  My problem is, that I give with the software Toshiba guard easily a password to start with 9 letters: "cjbasdahl." For safty, I write again the password. I do and write again, 'cjbasdahl '. The computer accepts the password because the first password is the same how the second password.

  When I start (boot) the laptop will have a password with 8 (not 9) letters. I can't use the password 'cjbasdahl '. What can I do? I form the password coz when I boot the leng even as the password or not?

  When I did find the password. What can I do?

  Hello

  The fact is that the BIOS password can be removed only by the service of Toshiba.
  There is no need of a special procedure that can be done only by the service man.
  There is no other way to make mobile accessible full

• Help: I forgot my password on bios to boot.

  guys, help me.

  I forgot my password for me boot to bios. How to remedy?

  Thank you, need help very badly.