Bitlocked drive share over a network

Similar Questions

• I have a drive mapped to the network, but the icon is located in a folder. I get access denied when I click on the drive.

  I have a drive mapped to the network, but (My Computer) icon is a folder. I get access denied when I click on the drive. But if I open windows Explorer, I can access the drive mapped without problems. Win Xp

  original title: mapped drive error.

  Hello

  Make sure that the mapped drive is configured to share and works on part.

  Auto-mappage will not work if there is a problem with sharing.

  Maybe this can help.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

• Drive is inaccessible: power outage when the decryption of the disk encrypted by using BitLocker Drive encryption

  Original title: bit locker drive encryption

  Hi all...

  I encrypted my 1 TB with the bitlocker drive encryption drive and while I was decoding, there is power failure my disc got screwed up... now I can't even format my drive, not to mention to recover all data of this...

  the drive is displayed in the my computer and disk management sometimes but when I try to do something with it my system hangs...

  What should I do? Help, please!

  Try http://support.microsoft.com/kb/928201 Bitlocker repair tool and see if that helps.  Make sure you use the right download for your version of Vista.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• RICOH Aficio 1045 Pcl 6 cannot be contacted over the network

  I am running Windows 7 Pro 64-bit and I try to install a printer multifunction Ricoh Aficio 1045 on a network. I was able to do a typical "add a printer" and everything seemed fine, but I can't print. When I run the troubleshooting printer I get the following error 'printer RICOH Aficio 1045 Pcl 6 cannot be contacted over the network. He said to contact my system administrator. I don't have a system administrator. I'm open to any ideas on this one.

  Printer driver from the site Web RICOH (PLC 6 pilot - worm. 3.1.0.0 r31047en)

  Intel i7 - 3770 k @3. 5 GHz (8cpu)

  16384 MB of ram

  AMD (ATI) V over-pants 725 MB graphics card

  I actually solved myself yesterday.  I installed the printer using its ip address and the PL5e driver and it worked fine.  Thank you. .

• How can I use my time capsule as a hard drive on an existing network accessed through a password

  How can I use my time capsule as a hard drive on an existing network, storage, accessed through a password?

  We need more information in order to provide the right solution and Setup for you.

  You already have another router Apple... as an AirPort Extreme or Airport Express that provides the signal of your wireless network?

  If not, what is the serial number and model of your modem?

  Finally, what operating system is installed on the device you will use to install and configure the time Capsule? If it's a Mac and you're not sure what operating system it uses... click on the Apple icon in the upper left corner of the screen, then click on about this Mac, and post back with number of Version of OS X that you see there.

• HP ENVY 4520: HP Envy 4520 - refusing to Scan over the network

  Hello

  We currently have a HP Envy 4520, which print, however don't scan or copy over the network.

  I have downloaded and run the HP doctor tool, but it crashes to Windows Image Acquisition (WIA). This article has been read a few topics here, I restarted the following three services:

  1. Remote procedure call (RPC)
  2. Shell Hardwarew
  3. Windows Image Acquisition (WIA)

  Once I finished at the outset what precedes, the scanner worked as expected. However after a reboot - the problem is more severe. The doctor program crashes at the same section and restart services fail to achieve something.

  All software and drivers are up-to-date by using what has been provided on the HP website.

  The error messages vary as well, for example Adobe, I see "fatal error. Commissioning stopped. "

  Hi @DocCottle

  Thanks for your response!

  I managed to solve the problem. After you reset the windows service, you must then make sure that the printer restarts too! I didn't do that. Once done all is well!

• I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me? CC = en

  I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me?

  Here is the link to the LAN of your system drivers:

  http://ftp.HP.com/pub/softlib/Software7/COL15134/ob-40490-1/sp26744.exe

• Why convert? What is the advantage? Why convert it before you send the data over the network?

  Hello everyone.

  I have a question quite simple and intuitive. Yet Google does not seam to get the answer.

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  I've been curious about this for a while and have yet to find an answer. Any help is appreciated.

  Thank you
  Taylor S. Amarel

  tsa256 wrote:

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  It really depends on the specific situations.

  For example, some functions explicitly require certain types of data as inputs if they are not polymorphic.

  This means that if you do not convert the data yourself and you will see a red dot forced LabVIEW will do it for you.

  As to why the data was not the correct data type in the first place, it is sometimes inevitable.

  A few examples

  -What happens if you just read a text file as a long string.

  If there is digital data in this file, you need to analyze, and then convert it to a usable type (int, sgl, dbl, etc.)

  -you are given a 3rd part VI, dll, etc. that returns a numeric value as a double, but you need the value to I8.

  You cannot change the output of the function given to you, so what you can do to remedy this situation is cataloged data.

  tsa256 wrote:

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  Somehow, this is my first response, but in a more general sense.

  Many functions down to the level of the OS run in binary.

  If your data are not already in binary, the sending computer must convert it to binary, and then send it, have the receiving computer convert in return.

  Two conversions on each side of the transmission add unnecessary delays.

• LaserJet P2055DN - do not print over the network

  Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

  I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

  Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

  Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

• I can restore the backup made by WHS v1. PP3 the WHS 2011? Or do I need to copy the files over the network of old serevr again?

  WHS backup

  You just bought a new WHS 2011. Question, can I restore the backup made by WHS v1. PP3 the WHS 2011?  Or do I need to copy the files over the network of old serevr again?

  Hello

  Because the problem is with Windows Home Server, I recommend you post this question in the Forums Windows Home Server.

• HP 2520HC: install the software of the printer over the network

  Hello

  I use the HP 2520HC series at the office. I use a network connection.

  Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

  Please help me.

  Hello

  such a USB printer allow only all features on a directly connected USB computer.

  Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

  You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

  Kind regards

  Shlomi

• BitLocker Drive preparation tool - fail

  Hello

  So, I try to activate bitlocker on my laptop drive encryption, which is already running Vista Ultimate x 86.  I was not initially intended, and I knew that if I wanted to later, I could allagedly use the Bitlocker Drive preparation tool, so I built it with a single partition.

  Now, I want to activate bitlocker, so I downloaded the drive preparation tool, but I when I run it, I get the following error:

  "The bitlocker Drive Preparation Tool cannot find a system of target drive.  You may need to manually prepare your drive for BitLocker. »

  So I search and find this article kb http://support.microsoft.com/kb/933246

  I tried to manually specify the system drive by running the command line: ' BdeHdCfg.exe - target: shrink - newdriveletter x: - size 1500-quiet - restart ", but she just runs for a few seconds and then returns to the command prompt, so I check the event log and find an entry under the logs event observer, applications and services, Microsoft, Bitlocker DrivePreparationTool, Admin and found events (event error 1 id) similar to what I saw in the GUI of not find a system drive.  Under the operational event folder, I found event ID 4104, "a volume did not meet the requirements for a target volume. Volume: C: reason: impossible to reduce the target volume of the requested size. "

  So in the above article, my error message with certain proposed resolutions: "temporarily disable the hibernation option and disk paging. Then, use the Windows preinstallation environment to remove the file Hiberfil.sys and Pagefile.sys file. Restart the computer in Windows Vista. Then run the BitLocker Drive preparation tool. "OR"reinstall Windows Vista. »

  So of course, I tried the first suggestion, disabling hibernation using "powercfg-h" off and delete the hiberfil.sys file, disabled a swap under System properties file and deleted the "pagefile.sys" and restarted.

  Always the same error :(

  Is the second action plan 'Reinstall Windows Vista' serious?  I want to activate the drive encryption, should not be this hard.  I don't think that requiring people to reinstall just because an application cannot function in a reasonable way to be an excuse...

  Hi benneh,.

  In the article you posted there are two different scenarios listed that could cause the error message:

  "The bitlocker Drive Preparation Tool cannot find a system of target drive.  You may need to manually prepare your drive for BitLocker. »

  In your post you referenced scenario 2 and the steps you took to solve it, but you reference scenario1 which is as follows:

  Scenario 1: You do not have enough free disk space to "at least 10 percent of the active partition must remain free after the partition size is reduced by 1.5 gigabytes (GB). To resolve this error, move the files to another partition or delete files. »

  Just to be sure that it is not the reason for your question; After subtracting the reduction in size of 1.5 GB for your total hard drive space always need it the 10 percent of free space on the active partition?  Please let us know.  Thank you.
  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver Ethernet controller and network installation

  I am a newbie, please help for the driver Ethernet controller and network installation

  product - portable r007tx

  OS - window7 64 bit

  -> error code realtech controller network not found... If hibernation is enabled, connect the cable

  unknown device device info Manager

  (1) ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2212103C & REV_07

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2212103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  (2) network controller

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3290 & CC_028000

  PCI\VEN_1814 & DEV_3290 & CC_0280

  (3) pci device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_2212103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_2212103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Hello:

  First install the Intel chipset driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127448-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127815-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• Unable to upgrade Windows Vista to 7, error: implementation could not determine whether the BitLocker Drive encryption is in use.

  Original title: Upgrade Vista - 7 and issue of Bitlocker.

  I'm upgrading stops priocess Vista-32 to Windows 7 family 32-bit and upgrade when checking report of compatibility as a result of the error message following: "implementation could not determine if BitLocker Drive Encryption is in use.

  I have established that my Vista is not only encryption, so I can't turn it OFF... it's weird I had myself far enough in before upgrading... always new problems affecting it right back

  Hello

  I suggest you try the steps suggested by Andre Da Costa replied on March 27, 2010. From the following link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-determine-if-BitLocker-Drive/7be7ac98-5e73-49e5-9636-179cf7b11b23

  See also: What is the difference between disabling BitLocker Drive encryption and decrypt the volume?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-difference-between-disabling-BitLocker-Drive-encryption-and-decrypting-the-volume

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems