BitLocker - encrypt - decrypt cycle after the replacement of the motherboard?

Similar Questions

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• After the motherboard was replaced, said revalidate Windows XP

  I did not have ALL the DISCS OF ORIGINAL INSTALLER and am frustrated full after all the work I put into trying to fix this machine... bought the new motherboard on ebay for 10 buck a new graphics card and replaced both the old motherboard was found to be the problem and trhe computer started and has ran for three days showing the above message... now three days are up and while I couldn't get online to validate the copy because of Internet problems, now I can't open the windows. He returned me I need to validate this copy... screen which shows nothing HELP... Please... very frustrated.

  * original title - as a hobby, I just replace a motherboard on an old processor 2003 I've had in my shop... Now that I have it working again, it gives me a message of: due to this computor signifigant material changes, you must revalidate your copy of windows. *

  "mmergatroy" wrote in message News: 3eb749aa-6433-47 d 7 - 91 d 3-42f5cea9d60d...

  I did not have ALL the DISCS OF ORIGINAL INSTALLER and am frustrated full after all the work I put into trying to fix this machine... bought the new motherboard on ebay for 10 buck a new graphics card and replaced both the old motherboard was found to be the problem and trhe computer started and has ran for three days showing the above message... now three days are up and while I couldn't get online to validate the copy because of Internet problems, now I can't open the windows. He returned me I need to validate this copy... screen which shows nothing HELP... Please... very frustrated.

  Your replacement of the motherboard invalidated the (probably) the OEM license with which the machine has been installed by the manufacturer.
  You can buy an OEM license or a new retail license – if you're very lucky, you can even get a legal. MS sells more XP licenses - the only sources are likely to be auction sites where more than 50% of the sold software is counterfeit, so make sure you check the seller completely!
   
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• After the motherboard replacement Tecra S2 does not start

  Hello

  I replaced the motherboard in my Tecra S2 and now it does not start, the power light is on but nothing on the screen. I can hear the h/d running DVD lights.
  I tried to remove the RAM.
  Also checked the CPU and still nothing.

  NEED HELP.

  Are you sure that the display is OK and correctly connected?
  Is busy, I mean drive HARD HDD LED flashes?

• problems with wireless after the motherboard, cpu and ram upgrade adapters

  As the title says, I have recently updated my card mother, cpu and ram (increased from Asrock extreme6 z77/i7 3770 k/Kingston 8 gb hyperx for EVGA ftw/i5 z97 4670 k/g. Skill ripjaw x 16 gb). I always use the same installation of Windows 7 64 via the same SSD. After I was installing new equipment, I used the disc that comes with the motherboard and installed all the drivers that were available (twice, just to be safe). All the features of the OS I had before seem to be there except to exit Device Manager to correctly install the drivers for my wireless (Linksys AE1000 and TP Link N900) adapters. I downloaded the current driver for the Linksys Web site and I have the disc for the TP-Link and I tried several times to install, but keep the same message ' Windows found driver software for your device, but has encountered an error trying to install it. Device Manager recognizes the device and it is not any question of State symbol (IE yellow triangle, etc.) that is displayed in conjunction with an adapter. I tried disable/re-enabling and uninstall/re-installing times and keep having the same problem. I tried to search in several forums of people with similar problems, but none of the resolutions seem to work or are suitable for my situation. Any help that can be provided would be greatly appreciated. Thank you.

  Hello

  When you upgrade your motherboard, cpu and ram, drivers for particular devices may not be related to other drivers. That's why I suggest you to install all the drivers for the chipset from the manufacturers website and see if that helps.

• El Capitan: macbook pro encryption self started after the update to iTunes on 11/12/16.  After restarting the computer open to grey screen asking if I wanted to use ICloud password or logon password updated.  I don't want / need for encryption I do?

  After update iTunes on 11/12/16 my computer restarted "grey screen" and required a password for encryption.  He encrypted then my MacBook Pro (10.11.2) in addition, the iTunes update has 'lost' My Playlists, and 90% of my purchases.  Apple Care level 2 could not find them!  They appear in my account, but not in my iTunes.

  1 can I fully encrypted computer?  Otherwise how can I UN-encrypt?

  2. How can I get my old, entirely organized iTunes back?

  Thank you

  File Vault encryption is a security feature. Olny you know if you want or need it. I don't use it.

  To remove the see of

  Use FileVault to encrypt the boot on your Mac - Apple Support disk

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  It appears that there is a problem. This happens a few times. If you have a backup yo can restore from the backup

• MBAM Sccm Bitlocker - automatically have bitlocker encrypt without connecting to the computer

  Push us to bitlocker with SCCM and make changes in policy with GPOS and manage bitlocker with MBAM.  During load tests, it seems that Bitlocker requires the user connects and responds to start the encryption process.  Is there a way to have MBAM/Bitlocker, automatically encrypt the drive during the build process, and of course updated the MBAM server, without someone must log in and answer the qustion of start?

  Hi Dan,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  System Center 2012 Configuration Manager TechNet Forums

• / 3GB (from 4 GB) after the motherboard upgrade - how to get back my 1 GB?

  I recently updated my motherboard and my Vista Ultimate update now recognizes only (mode ala pre service pack) 3 GB instead of 4 GB that is installed.

  What can I do to recover my full 4 GB?

  Hi cheese Switzerland.

  If a computer has 4 gigabytes (GB) of memory installed RAM (RAM), system memory shown in the system dialog box information in Windows Vista is less than expect you.

  This behavior is the expected result of some hardware and software factors. Various devices in a typical computer require memory-mapped access. This is known as memory-mapped i/o (MMIO). For the MMIO space is available for 32-bit operating systems, the MMIO space must reside in the first 4 GB of address space.

  Follow the instructions in the link below that may help you resolve the issue.
  System memory shown in the system information dialog box in Windows Vista is less than expected if the 4 GB of RAM is installed
  http://support.Microsoft.com/kb/929605/en-us

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• create the example simple encrypt/decrypt string - but without success

  Being a newbie crypt I'm trying to build an example of simple string encryption/decryption, but somehow the decrypted result differs too much :-)
  Can someone tell me the error in my reasoning? Thank you!
  
  import java.security.InvalidKeyException;
  import java.security.NoSuchAlgorithmException;
  import java.security.NoSuchProviderException;
  Import javax.crypto.BadPaddingException;
  Import javax.crypto.Cipher;
  Import javax.crypto.IllegalBlockSizeException;
  Import javax.crypto.NoSuchPaddingException;
  Import javax.crypto.spec.SecretKeySpec;
  public class dum_8_decrypt64 {}
  
  Public Shared Sub main (String [] args) throws NoSuchAlgorithmException, NoSuchProviderException, NoSuchPaddingException, InvalidKeyException, IllegalBlockSizeException, BadPaddingException {}
  
  Dim input As String = "Hello, world!";
  String key = "nv93h50sk1zh508v";
  SecretKeySpec key;
  Encryption cipher = null;
  Encryption by dcipher = null;
  The string result, dresult;
  
  key = SecretKeySpec (passkey.getBytes (new), "AES");
  
  encryption = Cipher.getInstance ("AES/ECB/PKCS5Padding", "Sunjce())");
  Cipher.init (Cipher.ENCRYPT_MODE, Key);
  
  result = new String (cipher.doFinal (input.getBytes ()));
  
  System.out.println ("encrypted-> string" + result + "<-");
  
  dcipher = Cipher.getInstance ("AES/ECB/PKCS5Padding", "Sunjce())");
  dcipher.init (Cipher.DECRYPT_MODE, Key);
  dresult = new String (cipher.doFinal (result.getBytes ()));
  
  
  System.out.println ("decrypted-> string" dresult + "<-");
  
  }
  }
  
  Output:
  
  Encrypted-> string.
  p ÿƒG¬µ? (.« <----------
  
  
  The decrypted-> string Qbkuu $Ñ 5oaw'?) ; Yeutdp3wvk < -.

  Encrypted data is binary.

  String is not a container for binary data.

• Error using APDU buffer for update methods (encrypt/decrypt/sign)

  Hi all
  
  I get an Exception system and the error code is 3 which is ILLEGAL_TRANSIENT. I pass data between two cmdlets using the APDU buffer. The 1st applet is the applet currently selected, which transmits the data to the applet 2nd to perform cryptographic operations. Encrypt/decrypt and sign all work well using init() & doFinal() when the data is small enough to be transformed into a go. The problem is when I try to use update() for larger data, I get the error ILLEGAL_TRANSIENT (I get this for a signing operation, but guess I'll get the same thing to encrypt/decrypt as well)
  
  The JCRE (section 6.1.5 of the 2.2.1 version) specification explains this error as an attempt to access a transitional type CLEAR_ON_DESELECT object when the current context is not the context of the currently selected applet. The APDU buffer comes from the applet 1, which is the applet currently selected, so I think that's why I see this error. However, it does not make sense to me that I am able to do all calls except the update using the APDU buffer - clearly the update call tries to use the buffer passed to somehow illegal - but that shouldn't be my problem, I thought I'd...
  
  Any help/comments would be appreciated.
  
  Swati

  In addition, when you create the instance of the encryption algorithm you set externalAccess true? This is necessary to access the applet properly through ITSELF.

  The doc of the API:

  externalAccess true indicates that the instance will be shared between applet multiple instances and that the instance of the encryption algorithm is also available (via a shared interface) when the owner of the instance of the encryption algorithm is not the currently selected applet. If true the implementation doesn't have to allocate internal data CLEAR_ON_DESELECT transitional space.

  See you soon,.
  Shane

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• What happens if I forget to remove my key (Flash DRIVE) storage media after the Bitlocker Drive encryption key is responsible?

  I'm new to BitLocker and don't know much about computers in general. I do not have a TPM, so I use a USB key containing the BitLocker encryption key to start Windows. Everything works fine. I don't, however, forgot to remove the USB after that and also when you restart the computer. This could be a security problem if I am connected to the Internet? (I'm alone and therefore am not worried else wanting to access the computer in person.) I'd appreciate any help I could get with this question.

  Hi Tombroilt,

  If you are only using the computer, then it is not a security problem. If you connect to the computer. I suggest you to see the following links for more information.

  Windows 7 BitLocker Executive Overview
  http://TechNet.Microsoft.com/en-us/library/dd548341 (v = WS.10) .aspx

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  http://TechNet.Microsoft.com/en-us/library/ee449438 (v = WS.10) .aspx

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

  Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• How can I restore my computer encrypted bitlocker to an external hard drive for bitlocker encrypted after main disk failure?

  I backup that my bitlocker encrypted computer running vista ultimate on an attached USB harddrive external also encrypted by bitlocker.  I have the password both on a USB stick and written down.

  You can restore to normal full image (well close to normal) just using the USB Flash drive and a hard disk formatted, white (with a system partition at least as large as the partition which it replaced)- and, of course, the backup drive.  I see no reason why a bitlocker recovery will be different - after all, it's just not added encryption process (although the exact procedure may vary because you may need to supply a password to authenticate the restore function and decrypt the files as they are restored - that's why it doesn't happen on the CD).  Of course, this means that you must have done a full image backup using bitlocker (not a full backup or a file backup).

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• Laptop HP 15-af008ax: could not find the drivers appropriate for ACPI\SMB0001\3 &amp; 2411E6FE &amp; 1 and PCI controller of encryption /Decryption

  After installing the drivers from the HP site I can not find drivers for ACPI\SMB0001\3 & 241E6FE & 1. Device Manager displays "UNKNOWN DEVICE" and said that no drivers were found for her. It is with th encryption /Decryption PCI controller.
  Please suggest me what to do. I'm confused ;-(

  Hello:

  You need this driver for the first...

  http://www.Synaptics.com/en/drivers.php

  To the PCI-E/D controller, you must manually install the driver as follows...

  Download and run this file.  Conclusion of any windows error.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_133833_1

  Go to Device Manager and click on the controller E/D PCI needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66974.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart.