BITS does not start Win7 64 (PA bear MS MVP)

Similar Questions

• Win2k3 comments of 64-bit does not start on 64-bit Vista, processor E6700 with VT active host

  I have a guest for Windows Server 2003 64-bit running on a 64-bit Vista with VMware Server 2.01 host.  The host system has a CPU of Core2Duo Intel E6700 and VT is enabled in the BIOS.  The guest has worked fine until this morning.  Windows updates hit the host the next day and installed Microsoft lastest set of security patches and rebooted the host.  Because then the host 64-bit does not start - I can get the BIOS on reviews, but Windows itself indicates that he doesn't see a 32-bit CPU and cannot load 64-bit operating system.

  64-bit VMware compatibility checker, said that the host is 64-bit ready comments.  I don't know if something is messed up in the comments or on the host?  It's the only host 64-bit on the system, all the other guests are 32-bit and load very well.

  See troubleshooting problems of Intel VT - x.

• Windows 7 32 bit does not start after the installation of the need for assistance

  I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

  I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

  The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

  Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

  Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

  If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

  Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

  Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

  So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

  Thanks in advance.

  Remove the DVD, boot in OSX and after the release of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Windows Update vista Home premium... Lack of Security Center BITS does not start * SOLVED(7/31)-fixed myself... reinstall vista updates explore (9)

  See my last reply vista updater windows Home premium service... BITS will not start the lack of files... iolo destroyed the index I fixed and ran updates, so I uninstalled iolo and it took some tips that i reinstalled the index but it doesn't start, said missing file probably out when I uninstalled iolo how can I reload those files.  RUN SYSTEM UPDATE READINESS No. CHANGE of TOOL... now, I ran BITS Repair Tool for Windows Vista and it says that it is not necessary and that it does not run.  !!!!!!!! still need help please, I ran it (not fixed) fix 7/30, and the file system Checker says there's no problems.

  Hello

  Glad to know that you were able to solve the problem. Your efforts are very much appreciated.
  Reply back if you are having problems with Windows in the future.

• Program compatibility Windows 7 64 bit does not start

  Hi my Windows 7 64 bit program compatibility does not start problem is the package id pcwdiagnostic

  path c/windows/diagnosis/system /pcw

  error code 0x80070426

  source engine

  context limited

  [Original title: malankane]

  Hello

  Thanks for posting your query in Microsoft Community.

  • You try to install a program in compatibility mode in Windows 7 64 bit?

  I suggest you refer to the article below:

  Help with Windows 7 compatibility issues

  Understanding hardware and software for 64-bit Windows

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows Vista Basic, 32 bit, does not start up-will start in safe mode

  My computer fails to start. This problem came about 2 weeks ago when I rebooted after an update for McAfee Total protection requiring a reboot. But I don't know if that is why the computer not boot not correctly.
  After a lot of testing to the Startup Repair and shut down the pc and start it again, it starts to open a session for users. But after that I restarted again in this State, the problem persists.
  There is no error codes or messages, it just does not start. There is no virus infection (I hope). While the pc is booting, I also connected to Admin and checked if there were any problems found. But no other problem than a problem with Teredo Tunneling Pseudo - Interface. I solved this problem.
  So after all these checks, I restarted again, and it will not start again.
  It starts in Mode safe with no problems, and I have restored the pc a couple of times, but no use.

  Y at - it a fix for this?
  Any help will be very appreciated!

  Thank you

  Hello RubeenaY.

  After looking on this thread. the most remarkable thing I've seen, is that we are able to boot mode safe without problem. Typically, this means that we cannot start because a driver, service, or application takes over at startup which prevents our normal operation.

  I recommend you to perform a clean boot, as they did in the previous post.

  More information on Boots own is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know how it works.

  Best regards

  Matthew_Ha

• Visual Studio 2010 on Windows 7 64 bit does not start with error 0xc000007b Application

  Charge installation of Visual Studio 2010 Professional on Windows 7 64 bit
  Picked up SP1 before you run the first time.

  Running fails with:
  ---------------------------
  devenv.exe - Application error
  ---------------------------
  The application was unable to start correctly (0xc000007b). Click OK to close the application.
  ---------------------------
  Ok
  ---------------------------

  The Dependency Walker tool lists the following messages:
  Error: at least a module has an import unresolved due to a missing in an implicitly dependent module export function.
  Error: Modules with different CPU types have been found.
  WARNING: at least a delay load dependency module was not found.
  WARNING: at least a module has an import unresolved due to an export feature missing in a dependent module of lazy loading.

  There are two 64-bit dll that is referenced:
  IESHIMS. DLL and MSVCR100. DLL

  I can copy MSVCR100. DLL from C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE\Remote Debugger\x86 in C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE (next to devenv.exe) and I get the splash screen.  However, before the same load completely blocks.  Added an IESHIMS to 32-bit. DLL of C:\Windows\winsxs does not solve the startup crash problem.

  Not quite sure what else to try, any advice would be great.

  Hello

  For assistance on this issue, you can ask your question here:

  Installation and configuration of visual Studio

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

• Windows Vista (64-bit) does not start.

  Last night, I installed the new McAfee antivirus due to having a virus that prevented the windows firewall to allow me to surf the net via my router (usually would work when directly connected to the modem). The antivirus has worked very well and I was able to access the internet very well. The rest of the evening consisted of me Star Trek Online patch and play a little of it and there was still no problem. This morning I woke up to find my computer screen in the the Startup Repair stating that it could not load Windows Vista.

  Here are the details given after that Startup Repair ends:

  Problem event name - StartupRepairV2
  Prob GIS 01 - AutoFailover
  Prob GIS 02 - 6.0.6001.18000.6.0.6001.18000
  Prob GIS 03-6
  GIS 04 196611 prob
  Prob GIS 05 - BadPatch
  Prob GIS 06 - BadPatch
  Prob GIS 07-0
  Prob GIS 08-3
  Prob GIS 09 - WrpRepair
  Prob Sig 10-10
  Version of the OS - 6.0.6001.2.1.0.256.1
  -ID of locale 1033

  I tried to go in Mode safe mode (F8) and it still won't start. The Startup Repair cannot repair. Any suggestions?

  Hello

  You can perform a recovery of windows system restore and check.
  Follow the step from the link provided.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  We need the DVD of windows to solve the problem. I suggest you to contact the manufacturer of the computer and get windows vista DVD. If you are able to get the Windows DVD and then, I suggest you to follow the steps in the supplied knowledge base articles and check.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

  If you are not able to get the Windows Vista DVD, I suggest you contact dell and request a recovery DVD

  Contact us
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

• HP Pavilion m9252p Vista 64-bit - does not start

  My Pavilion m9252p will not start not (diagnosis says corrupted registry) and before I take drastic measures of system recovery, if I remove the hard drive from my office computer and connect it to another computer as a second drive, I will be able to access the files of data from it?  I know that one of the options is to make a backup of the data of the system recovery, but I don't have enough storage.

  As you suggest, you can connect the hard drive of the computer on which you have the question to another computer as a second hard drive and can back up the data and not the installed files. There is no wrong in that it's just for a data backup

• Wil bits does not start

  When updated from vista home basic 32-bit windows, I get the error code 80246008 #.

  My background intelligent transfer service is stopped, but when I try to start the service with automatic (delayed start), I get the error windows cannot start service on local computer background intelligent transfer.  Error 87 parameter is incorrect.

  My antivirus software is disabled.  Also windows defender will not be updated, but I was able to manually download the latest definitions of update of the microsoft malware protection Center.

  Any help is appreciated

  Hey Yorkey... Now check this... According to the error Code

  0 x 80246008 -2147024894

  http://support.Microsoft.com/kb/916251 http://support.Microsoft.com/kb/956706

  0x8DDD0018 0 x 80246008 0 x 80200013 0 x 80246008	http://support.Microsoft.com/kb/910337	Microsoft Windows Update
  http://support.Microsoft.com/kb/883614	XP update &

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• Windows 7 Ultimate 32 bit does not start after updates

  Hello

  I recently installed Windows 7 ultimate on a PC under Vista Basic.  I have done this as a clean install, wipe the existing partitions and create a new one for the installation.

  Everything was going well for two days until this morning when I turned on the P.C. I get the screen of the bios of the system and can see my SATA drive in the Bios and the size is properly reported. However, after the bios when the computer tries to start Windows, I get a blank screen and the hard drive remains slight activity at all times.

  I took the drive into the pc and put it in another pc via an external hard drive box and I can see the data and files in the disk.

  I put the disc in the original and booted PC from my DVD of windows 7 I tried to run the bootrec tool but the tool said that he had no windows partition!

  Now I had to reinstall Windows 7 from scratch even once - I do not have a hardware or software yesterday and I shut down the system properly (the Office was left connected to a UPS because it is at work, so no power problem on shutdown).

  The only thing I can think of happens out of the ordinary yesterday was a load of Windows, updates requiring a reboot in the morning, but the machine was fine after that.  I have actually a lot on the machine yesterday like I did has been implemented of a laptop for a demo of systems almost all day.

  Everyone has met nothing like yesterday? Or have any idea of what past?  I don't want to have to rebuild my PC whenever there are updates!

  I had a similar problem yesterday with 12 October 2010 MS update on a laptop running Win 7 Professional. PC worked perfectly in the morning, I downloaded the update to 32 MB and the installation process seems to be okay, but I couldn't get past the Windows 7 login screen after booting. Kept, get a blank screen. Even tried to start safe mode, but got the same answer. Later, I used the F8 key at startup and selected the last restore point that was created a week ago. It helped me in my PC. I removed the automatic download more MS Updates. One of the 12 had about 10 patches in it and really messed up my PC. Good luck. /

• Vista 32 bit does not start after the mode 'sleep'

  I have Vista Ultimate 32 bit SP2.  I put the computer in standby mode and the next day morning tapped the keyboard space bar to wake him up.  I have a Logitech G15 game keyboard with an LCD display, it began to rise, then I noticed all the keyboard lights were flickering.  The system never started and the screen remains black.  I took the cover off my PC and noticed that fans have been "forced" for about 1 second then remains off for a period of about 5-7 seconds before the pulse on once again.  This is repeated.  I pressed on the power switch for the computer for 20 seconds, without result.  I disabled the power supply directly for about 20 seconds, he turned back and have the same pulse.  Then I unplugged the power cord to supply POWER, same year, same net effect.  I've checked all my connections, etc., everything is in order.  I got an iPod touch connected to the computer via the USB port before sleep.  But I perfrmed this function several times one never had a problem.  I of course got the thing first USB when I started my problem.  I guess it's one thing to the BONE, but what's my line?  Thanks much for any help!

  A little late on the answer, but he had nothing to do with food. I was able to solve the problem by turning off the computer, unplug and burst the battery from the motherboard, let it rest a bit, then put it back together and bam, I'm back in business. I think it's a problem between the motherboard BIOS and Hibernate commands put off by * Vista and the only way to stop the loop is the above afformentioned. Everyone always wants to blame the food for these issues... Now PS can cause really strange but common problems...

• Rollercoaster Tycoon 3 / Windows 8 / 64-Bit (does not start)

  Hello

  Just bought the RCT 3 and installed. Everything worked fine until I tried to start the game.

  Bought and downloaded (Deluxe Edition).

  When I run the game (as Admin) a pop up window that says first time u start the game, you must install drivers (you need administrator rights)
  After clicking Yes, a new window appears instantly with error 1275 and after klick on OK a new Popup with the opinion that I don't have Adminrights to cela-_-

  Tried all modes of compatibility and running it as an administrator!

  Here are a few screenshots that is packed with Winrar (German)

  http://www.file-upload.NET/Download-7423917/RCT3-WIN8-error.rar.html

  Sorry for my bad English!

  Hello

  It looks like Rollercoaster Tycoon: Deluxe edition is not compatible with Windows 8.

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductDetailsViewer?Name=RollerCoaster%20Tycoon%3A%20Deluxe&vendor=Atari&Locale=1033&BreadCrumbPath=RollerCoaster%20Tycoon%3A%20Deluxe%203&Type=Software&tempOsid=win8

  Please contact a game administrator to find out if there are patches to work with Windows 8.

  http://www.Atari.com/support/Atari

  http://www.Atari.com/corporate/contact

  Please contact us if you have questions about Windows operating systems

• Lightroom 3.2 - 64 Bit. does not start - she says-opening Catalog:DSC0024.then stop

  I downloaded Lightroom 3.2 - 64 Bit. When I start the software it gives me the message"catalog Lightroom-opening: DSC0024. JPG. Ircat ".

  Then a window opens and says "Adobe Photoshop lightroom 64-bit has stoped working. A problem caused this program to stoped working properly. Windows will close the program and notify the

  "you if a solution is available.

  I have a Windows 7-64 bit

  Any help for Lightroom started would be appreciated.

  Probably a "fix" easier and more uniform would be to reset the preferences file. See this thread (post #6 provides details on how to reset the preferences file):

  http://www.lightroomforums.NET/showthread.php?12196-Lightroom-has-stopped-working&p=86685& viewfull = 1 #post86685

• First Elements 10 64-bit does not start

  My question:

  When I try to start Adobe Premiere Elements 10 64-bit the program will start and then windows will announce "Adobe Premiere Elements 10 has stopped working"

  My system:

  HP Elitebook 8540w

  Intel i7 CPU M640

  8 GB Ram

  64-bit operating system

  NVIDIA Quadro FX 880M

  I tried: (I'll try to remember everything)

  Uninstall/reinstall

  Reboot after each uninstall mentioned in the I tried section

  Uninstall antivirus

  Stop all programs and unnecessary services, that I could find

  Video and audio card drivers updated to the latest version

  Updated to the latest version of Quicktime 7.71.80.42

  Clean hard drive and temporary files

  Uninstalled NVidea Driver 3D, PhysX system, nview, and HD Audio Driver, leaving only the main display driver

  Checked event viewer looking for connected issues.  It still fails on display.dll.  Details below

  Name of the failing application: Adobe first Elements.exe, version: 10.0.0.0, time stamp: 0x4e791009

  The failed module name: Display.dll, version: 6.0.0.0, time stamp: 0x4e78fee0

  Exception code: 0xc0000005

  Offset: 0x00000000000230bc

  ID of the process failed: 0 x 874

  Start time of application vulnerabilities: 0x01ccaba6fa61d433

  The failing application path: C:\Program Files\Adobe\Adobe first 10\Adobe first Elements.exe Elements

  Path of the failing module: C:\Program Files\Adobe\Adobe first Elements 10\Display.dll

  Report ID: 3c543fc1-179a-11e1-ad00-68b599f767d3

  Any ideas?

  After spending all day on this I finally found the answer.

  He had something to do with my two monitors connected to my dock.

  Arrrgh!

  Disconnected from the laptop and it works fine.  Thanks for all the suggestions!

  Merck